VAR-SOM-MX6 Debian R1

VAR-SOM-MX6 - Debian Jessie release

Overview

This page describes how to assemble and install Linaro ALIP (ARM Linux Internet Platform) distro based on Debian Jessie on Variscite var-som-mx6 SoMs.

This instruction was tested with Debian 8.4 x64 (jessie) and Ubuntu 14.04/16.04 x64! When using other distributions, there may be problems.

SW Versions

package	version
u-boot	imx_v2015.04_4.1.15_1.1.0_ga_var01
kernel	imx-rel_imx_4.1.15_1.1.0_ga-var02
wilink 8	8.6 SP1
firmware-imx	5.4
imx-vpu	5.4.33
imx-codec	4.0.9
imx-gpu-viv	5.0.11.p8.4
xserver-xorg-video-imx-viv	5.0.11.p8.4
libimxvpu	0.10.2
gstreamer-imx	0.12.2
Linaro Debian ALIP	20160722-27

Create build environment

Installing required packages

Debian jessie x64

If your system does not have "sudo", set the "sudo" using the link: [1]

On your Debian building machine:

$ sudo apt-get install -y binfmt-support qemu qemu-user-static debootstrap kpartx
$ sudo apt-get install -y lvm2 dosfstools gpart binutils git lib32ncurses5-dev python-m2crypto
$ sudo apt-get install -y gawk wget git-core diffstat unzip texinfo gcc-multilib build-essential chrpath socat libsdl1.2-dev
$ sudo apt-get install -y autoconf libtool libglib2.0-dev libarchive-dev
$ sudo apt-get install -y python-git xterm sed cvs subversion coreutils texi2html bc
$ sudo apt-get install -y docbook-utils python-pysqlite2 help2man make gcc g++ desktop-file-utils libgl1-mesa-dev
$ sudo apt-get install -y libglu1-mesa-dev mercurial automake groff curl lzop asciidoc u-boot-tools mtd-utils

Ubuntu 14.04/16.04 x64

On your Ubuntu building machine:

$ sudo apt-get install -y binfmt-support qemu qemu-user-static debootstrap kpartx
$ sudo apt-get install -y lvm2 dosfstools gpart binutils git lib32ncurses5-dev python-m2crypto
$ sudo apt-get install -y gawk wget git-core diffstat unzip texinfo gcc-multilib build-essential chrpath socat libsdl1.2-dev
$ sudo apt-get install -y autoconf libtool libglib2.0-dev libarchive-dev
$ sudo apt-get install -y python-git xterm sed cvs subversion coreutils texi2html bc
$ sudo apt-get install -y docbook-utils python-pysqlite2 help2man make gcc g++ desktop-file-utils libgl1-mesa-dev
$ sudo apt-get install -y libglu1-mesa-dev mercurial automake groff curl lzop asciidoc u-boot-tools mtd-utils

Deploy source

Download archive contains the build script and support files for building Debian (Jessie) for this board:

$ cd ~
$ git clone https://github.com/varigit/debian-var.git -b debian_jessie_varsommx6_var01 var_som_mx6_debian

Create environment (Internet connection should be available):

$ cd ~/var_som_mx6_debian
$ ./make_var_som_mx6_debian.sh -c deploy

This environment prepared to build.

Make Debian

Build all

Internet connection should be available

$ cd ~/var_som_mx6_debian
$ sudo ./make_var_som_mx6_debian.sh -c all | tee 2.log

Build by parts

Build bootloader

$ cd ~/var_som_mx6_debian
$ ./make_var_som_mx6_debian.sh -c bootloader

Build kernel, dtb files and kernel modules

$ cd ~/var_som_mx6_debian
$ ./make_var_som_mx6_debian.sh -c kernel
$ ./make_var_som_mx6_debian.sh -c modules

Build rootfs

Internet connection should be available

$ cd ~/var_som_mx6_debian
$ sudo ./make_var_som_mx6_debian.sh -c rootfs

Pack rootfs

For the create archive root file system (rootfs.tar.bz2) run the following commands:

$ cd ~/var_som_mx6_debian
$ sudo ./make_var_som_mx6_debian.sh -c rtar

Create boot SD card

1. Follow the steps for make rootfs, kernel, bootloader;
2. Insert the SD card to card reader connected to a host system;
3. Run the following commands (Caution! All data on the card will be destroyed):

$ cd ~/var_som_mx6_debian
$ sudo ./make_var_som_mx6_debian.sh -c sdcard -d /dev/sdX

where '/dev/sdX' path to the block SD device in your system.

Successful process log

I: Flashing U-Boot
35+0 records in
35+0 records out
35840 bytes (36 kB) copied, 0.0773679 s, 463 kB/s
237+1 records in
237+1 records out
243104 bytes (243 kB) copied, 0.720032 s, 338 kB/s
I: Flashing "BOOT-VARSOM" partition
I: Flashing "rootfs" partition
I: Copying Debian images to /opt/images/Debian
I: Copying MMC U-Boot to /opt/images/Debian
I: Copying scripts to /opt/images/Debian
I: Sync sdcard...
I: Done make sdcard!
I: 
I: Command: "sdcard" end. Exit code: 0
I: 

Build Results

The resulted images are located in ~/var_som_mx6_debian/output/.

Image Name	How to use
rootfs.tar.bz2	Used to create sdcard
uImage	Linux kernel image
SPL.mmc	SPL built for SD-Card and eMMC boot. The SPL is pre-u-boot SW component, required for DDR initialization
u-boot.bin.mmc	u-boot built for SD-Card boot, or eMMC boot in case of DART-MX6UL.
Device Tree Name	Boot Device
imx6dl-var-som-cap.dtb	VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with capacitive touch
imx6dl-var-som-res.dtb	VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with resistive touch
imx6dl-var-som-solo-cap.dtb	VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with capacitive touch
imx6dl-var-som-solo-res.dtb	VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with resistive touch
imx6dl-var-som-solo-vsc.dtb	VAR-SOM-SOLO with iMX6S/DL on SOLOCustomBoard with capacitive touch
imx6dl-var-som-vsc.dtb	VAR-SOM-MX6 with iMX6S/DL on SOLOCustomBoard with capacitive touch
imx6q-var-dart.dtb	DART-MX6 with iMX6D/Q on DARTCustomBoard with capacitive touch
imx6q-var-som-cap.dtb	VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with capacitive touch
imx6q-var-som-res.dtb	VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with resistive touch
imx6q-var-som-solo-vsc.dtb	VAR-SOM-MX6 with iMX6D/Q on SOLOCustomBoard with capacitive touch

Linux console access

Standard Linaro Debian ALIP provide 2 user with no password:

User name	User descriptor
root	system administrator
linaro	local user belonging to sudoers

iMX6 accelerations packages

To support iMX6 GPU acceleration, libdrm souces have been patched to support Vivante using drm-update-arm.patch.

Since mesa and xorg-server sources depends on libdrm sources, related deb packages have been rebuilt.

To speed up rootfs generations, all generated deb packages are already part of the git repo and will be installed to substitute official ones. To avoid unwanted substitutions via apt-get upgrade, all those packages will be "set on hold" via apt-mark.

To support iMX6 VPU acceleration and avoid patching standard gstreamer, the new community driven gstreamer-imx plugins will be used.

Flash images to eMMC

If you want to flash images on eMMC, on the device, as root, run the following command:

# debian-emmc.sh

The above command are located in /usr/bin folder of uSD card used to boot debian.