DART-MX95 Display: Difference between revisions
From Variscite Wiki
(Created page with "<!-- Set release according to "release" parameter in URL and use mx95-yocto-nanbield-6.6.3_1.0.0-v1.0 as default --> {{INIT_RELEASE_PARAM|mx95-yocto-nanbield-6.6.3_1.0.0-v1.0}}<!-- --> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!-- --> {{#lst:Debian_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!-- --> {{#lst:B2QT_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!-- --> {{PageHeader|{{#var:HARDWARE_NAME}} Display}} {{DocImage|category1=Yocto|categor...") |
No edit summary |
||
| Line 28: | Line 28: | ||
panel-timing { | panel-timing { | ||
clock-frequency = < | clock-frequency = <74250000>; | ||
hactive = <800>; | hactive = <800>; | ||
vactive = <480>; | vactive = <480>; | ||
Latest revision as of 17:24, 15 July 2024
Warning: This page is designed to be used with a 'release' URL parameter.
This page is using the default release mx95-yocto-nanbield-6.6.3_1.0.0-v1.0.
To view this page for a specific Variscite SoM and software release, please follow these steps:
- Visit variwiki.com
- Select your SoM
- Select the software release
DART-MX95 Display
Introduction
Display Interfaces
- MIPI (4kp30 or 3840x1440p60)
- LVDS Bridge (LDB) (Dual 1920×1080 24-bit)
Adding custom LVDS panel
DART-MX95 evaluation kit comes with 800x480 LCD panel. DART-MX95 DTS file was created with this panel in mind. To support your custom LVDS panel, you should make several modifications
Referencing custom panel in the DTS file
The following code references Variscite panel in arch/arm64/boot/dts/freescale/imx95-var-dart-dt8mcustomboard.dts under kernel source tree
lvds_panel {
compatible = "sgd,gktw70sdae4se", "panel-lvds";
backlight = <&backlight>;
width-mm = <153>;
height-mm = <87>;
label = "gktw70sdae4se";
data-mapping = "jeida-24";
status = "okay";
panel-timing {
clock-frequency = <74250000>;
hactive = <800>;
vactive = <480>;
hback-porch = <40>;
hfront-porch = <40>;
vback-porch = <29>;
vfront-porch = <13>;
hsync-len = <48>;
vsync-len = <3>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
};
...
};
You should modify the "data-mapping" and "panel-timings" properties to match your panel specification and rebuild the DTB file..