Revision as of 12:56, 25 February 2015

VAR-SOM-MX6 - Yocto fsl-L3.10.53-1.1.0 Daisy R7

Introduction

This Android release is based on Android KitKat 4.4.2
Linux kernel: 3.4
Release 1

Supported hardware and features

Feature	Description
Board support	VAR-DVK-MX6,VAR-SOM-MX6
CPU	i.MX6 Quad i.MX6 Dual i.MX6 Dual lite i.MX6 Solo
Software platform	Yocto Daisy release. Freescale release version 4.1 Meta freescale community release for Daisy
Nand Recovery	Version 36
NAND Flash size support	128MB up to 1GB
eMMC	up to 64GB
DDR size support configuration	Solo:up to 1GB. DualLite, Dual, Quad: up to 4GB
SD-Card	+
Ethernet	10/100/1000 Mbps Ethernet
WLAN	Support for Wilink8, Dual band 5.0ghz + MIMO b/g/n
Bluetooth	4.0
CAN bus	+
I2C	+
SPI	+
USB host	+
USB OTG	Device / Host
Uarts	x3, up to 3.6 Mbps. Minicom avilable to use with the port
RTC	+
Display	HDMI 720P,1080P LVDS0 (On board LVDS to RGB bridge, EVK supports 800x480 resolution) LVDS1 external display
Audio	Line IN/ Line out
Camera	ov5640 camera sensor. CB402 board can be purchased separately
SATA	+

Installing required packages

No packages are required to install. Variscite provides a full VMware (TM) virtual machine, with repo pre-downloaded and all patches included.

Build Android tree

Login to the Ubuntu virtual machine: username: variscite password: password

Follow the below commands:

export PATH=/opt/jdk6/jdk1.6.0_45/bin:$PATH
export JAVA_HOME=/opt/jdk6/jdk1.6.0_45/
export ANDROID_JAVA_HOME=/opt/jdk6/jdk1.6.0_45/
export PATH=/home/variscite/workdir/Source_Package/APQ8074_LNX.LA.3.5-01620-8x74.0_KK_V22/out/host/linux-x86/bin:$PATH
cd ~/workdir/Source_Package/APQ8074_LNX.LA.3.5-01620-8x74.0_KK_V22/
source build/envsetup.sh
lunch msm8974-userdebug
make BUILD_ID=APQ8074_KK_V22

Build bootimage only

Follow above instructions, but replace: make BUILD_ID=APQ8074_KK_V22 with make BUILD_ID=APQ8074_KK_V22 bootimage

DART-SD800 Android DG: Difference between revisions