Recovery SD card general: Difference between revisions

Revision as of 18:17, 17 April 2023

Write the image to an SD card

During the SD card image writing all files and partitions are erased from target device.
Double check that the device is correct to avoid accidentally overwriting a different device and potentially damaging your existing operating system.

Using a Linux based host

Plug-in the SD card to your Linux host PC, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblkX)

$ sudo umount /dev/sdX?*

# For {{#var:UNZIP_EXT}} files:
$ {{#var:UNZIP}} <image name>.{{#var:UNZIP_EXT}} | sudo dd of=/dev/sdX bs=1M && sync

(Replace /dev/sdX with your actual device)

Using a Windows based host

Download Win32 Disk Imager from: https://sourceforge.net/projects/win32diskimager/ and install it.
Extract downloaded <image name>.img.gz file to get <image name>.img (using 7-Zip for example)
Insert your SD card into your PC.
No need to format the SD card before writing the image to it, as the card will be formatted once it will be flashed.
Run the file named Win32DiskImager.exe (in Windows 7, 8 and 10 we recommend that you right-click this file and choose “Run as administrator”).
If the SD card (Device) you are using isn’t found automatically. Click on the drop down box and select it
In the Image File box, choose the <image name>.img file you have extracted previously
Click Write
After a few minutes, you receive a notification that your SD has been created successfully.

Using a Mac OS X host

Use the dd Utility for MAC OS X to flash .img files to your SD card

@@ Line 7: / Line 7: @@
 $ sudo umount /dev/sdX?*
-# For .gz files:
+# For {{#var:UNZIP_EXT}} files:
-$ zcat <image name>.img.gz | sudo dd of=/dev/sdX bs=1M && sync
+$ {{#var:UNZIP}} <image name>.{{#var:UNZIP_EXT}} | sudo dd of=/dev/sdX bs=1M && sync
-# For .zst files:
-$ zstdcat <image name>.img.zst | sudo dd of=/dev/sdX bs=1M && sync
 (Replace /dev/sdX with your actual device)