B2QT DART-MX8M-MINI: Difference between revisions
From Variscite Wiki
(Add B2Qt Hardknott v1.0 Release) |
No edit summary |
||
| Line 508: | Line 508: | ||
-->{{#vardefine:USE_KMSSINK|true}} <!-- | -->{{#vardefine:USE_KMSSINK|true}} <!-- | ||
--><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/> | --><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/> | ||
=== mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1 === | |||
<section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/> <!-- | |||
-->{{#vardefine:RELEASE_NAME|mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1}} <!-- | |||
-->{{#vardefine:RELEASE_LINK|mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1}} <!-- | |||
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!-- | |||
-->{{#vardefine:RELEASE_TAG|mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1}} <!-- | |||
-->{{#vardefine:RELEASE_DATE|07/20/2022}} <!-- | |||
-->{{#vardefine:CM_RELEASE|MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI}} <!-- | |||
--><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/> | |||
<includeonly> | <includeonly> | ||
| Line 611: | Line 621: | ||
| First B2Qt Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI || | | First B2Qt Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI || | ||
<section end=RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/> | <section end=RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/> | ||
<section begin=RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''U-Boot''' || | |||
|- | |||
| imx8mm_var_dart: disable UHS, HS200, and HS400 MMC modes for sd card || | |||
|- | |||
| imx8mm-var-dart: Add eMMC (mmc2) to EFI boot targets || | |||
|- | |||
| imx8mm_var_dart: only check ptn5150 mode for usb0 || | |||
|- | |||
| '''Linux''' || | |||
|- | |||
| imx8mm-var-dart: rework M4 dts files for DART-MX8M-MINI and VAR-SOM-MX8M-MINI boards || | |||
|- | |||
| imx_rproc: imx8mm: imx8mq: Init M4 stack pointer and reset vector || | |||
|- | |||
| imx8_var_defconfig: enable CONFIG_USB_NET_CDC_EEM || | |||
|- | |||
| imx8mm-var-dart: disable usb over current || | |||
<section end=RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/> | |||
</includeonly> | </includeonly> | ||
Revision as of 22:17, 20 July 2022
dart-mx8mm-b2qt-v1.0
- B2QT_BSP_VERSION = 5.12
- B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
- B2QT_BRANCH = sumo-var01
- HARDWARE_NAME = DART-MX8M-MINI
- MACHINE_NAME = imx8mm-var-dart
- RELEASE_NAME = b2qt-sumo-dart-mx8mm-v10
- RELEASE_LINK = RELEASE_SUMO_B2QT_V1.0_DART-MX8M-MINI
- RECOVERY_SD_NAME = b2qt-sumo-dart-mx8mm-v10.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/b2qt
- SDCARD_IMG_EXT = wic
- YOCTO_NAME = Sumo
- YOCTO_VERSION = 2.5.3
dart-mx8mm-b2qt-v1.1
- B2QT_BSP_VERSION = 5.12
- B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
- B2QT_BRANCH = sumo-var01
- HARDWARE_NAME = DART-MX8M-MINI
- MACHINE_NAME = imx8mm-var-dart
- RELEASE_NAME = b2qt-sumo-dart-mx8mm-v11
- RELEASE_LINK = RELEASE_SUMO_B2QT_V1.1_DART-MX8M-MINI
- RECOVERY_SD_NAME = b2qt-sumo-dart-mx8mm-v11.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/b2qt
- SDCARD_IMG_EXT = wic
- YOCTO_NAME = Sumo
- YOCTO_VERSION = 2.5.3
dart-mx8mm-b2qt-v1.2
- B2QT_BSP_VERSION = 5.12
- B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
- B2QT_BRANCH = sumo-var01
- BUILD_FOLDER = ~/var-b2qt
- BUILD_FOLDER_B2QT = build-imx8mm-var-dart
- BUILD_SCRIPT = . setup-environment.sh
- DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt5-image
- EMMC_ROOTFS_DEV = mmcblk2
- EMMC_ROOTFS_PARTITION_NUM = p1
- FSL_BSP_VERSION = L4.14.98-2.0.0_ga
- HARDWARE_NAME = DART-MX8M-MINI
- MACHINE_NAME = imx8mm-var-dart
- META_VARISCITE_REPO = meta-variscite-imx
- META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-imx
- META_VARISCITE_BRANCH = sumo-imx-4.14.98-var01
- RELEASE_NAME = b2qt-sumo-dart-mx8mm-v12
- RELEASE_LINK = RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI
- RECOVERY_SD_NAME = b2qt-sumo-dart-mx8mm-v12.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/b2qt
- RELEASE_TAG = b2qt_sumo_dart-mx8mm_v12
- IMX_ATF_PLAT = imx8mm
- IMX_MKIMAGE_SOC = iMX8MM
- NXP_IMX_GIT = https://source.codeaurora.org/external/imx
- NXP_IMX_BRANCH = imx_4.14.98_2.0.0_ga
- NXP_KERNEL_BRANCH = imx_4.14.98_2.0.0_ga
- NXP_KERNEL_GIT = https://source.codeaurora.org/external/imx/linux-imx
- NXP_FIRMWARE = firmware-imx-8.1.1
- NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
- SUPPORTED_REV_SOM = v1.1 and higher
- SUPPORTED_REV_CARRIER = v1.1 and higher
- B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
- QT_VERSION = 5.12.9 RC
- KERNEL_GIT = https://github.com/varigit/linux-imx
- KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
- KERNEL_DEFCONFIG = imx8_var_defconfig
- KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
- KERNEL_IMAGE = Image.gz
- U-BOOT_GIT = https://github.com/varigit/uboot-imx
- U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
- U-BOOT_BOARD_NAME = imx8mm_var_dart
- U-BOOT_DTB_DART = fsl-imx8mm-var-dart.dtb
- U-BOOT_DTB_SOM = fsl-imx8mm-var-som.dtb
- U-BOOT_DTB_SOM_10 = fsl-imx8mm-var-som-rev10.dtb
- U-BOOT_OFFSET = 33
- U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
- U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
- U-BOOT_EMMC_DEV = 1
- U-BOOT_SD_DEV = 0
- U-BOOT_UMS_DEV = 0
- SDCARD_IMG_EXT = wic
- SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
- SOC = mx8mm
- SOC_SERIES = imx8
- SOC_FAMILY = imx8m
- SPL_SD_IMAGE_NAME = N/A
- TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt5-sdk-imx8mm-var-dart.sh
- TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/2.5.3
- TOOLCHAIN_LOCATION = /opt/b2qt/2.5.3/environment-setup-aarch64-poky-linux
- TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/2.5.3/sysroots/x86_64-pokysdk-linux
- TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/2.5.3/sysroots/aarch64-poky-linux
- TOOLCHAIN_TYPE = aarch64-poky-linux
- YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
- YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
- YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
- YOCTO_NAME = Sumo
- YOCTO_VERSION = 2.5.3
dunfell-b2qt-5.4-2.1.x-mx8mm-v1.0
- B2QT_BSP_VERSION = 6.0.3
- B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
- B2QT_BRANCH = dunfell-var01
- BUILD_FOLDER = ~/var-b2qt
- BUILD_FOLDER_B2QT = build-imx8mm-var-dart
- BUILD_SCRIPT = . setup-environment.sh
- DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt6-image
- EMMC_ROOTFS_DEV = mmcblk2
- EMMC_ROOTFS_PARTITION_NUM = p1
- FSL_BSP_VERSION = 5.4.24_2.1.0
- HARDWARE_NAME = DART-MX8M-MINI
- MACHINE_NAME = imx8mm-var-dart
- META_VARISCITE_REPO = meta-variscite-fslc
- META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-fslc
- META_VARISCITE_BRANCH = dunfell
- RELEASE_NAME = b2qt-dunfell-dart-mx8mm-v1.0
- RELEASE_LINK = RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI
- RECOVERY_SD_NAME = b2qt-dunfell-dart-mx8mm-v1.0.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/b2qt
- RELEASE_TAG = b2qt-dunfell-dart-mx8mm-v10
- IMX_ATF_PLAT = imx8mm
- IMX_MKIMAGE_SOC = iMX8MM
- NXP_IMX_GIT = https://source.codeaurora.org/external/imx
- NXP_IMX_BRANCH = imx_5.4.24_2.1.0
- NXP_KERNEL_BRANCH = 5.4-2.1.x-imx
- NXP_KERNEL_GIT = https://github.com/Freescale/linux-fslc
- NXP_FIRMWARE = firmware-imx-8.8
- NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
- SUPPORTED_REV_SOM = v1.1 and higher
- SUPPORTED_REV_CARRIER = v1.2c and higher
- B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
- QT_VERSION = 6.0.3
- KERNEL_GIT = https://github.com/varigit/linux-imx
- KERNEL_BRANCH = 5.4-2.1.x-imx_var01
- KERNEL_DEFCONFIG = imx8_var_defconfig
- KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB_DUNFELL_V12
- KERNEL_IMAGE = Image.gz
- KERNEL_VER = 5.4.85
- KERNEL_RECIPE_VER = 5.4
- U-BOOT_GIT = https://github.com/varigit/uboot-imx
- U-BOOT_BRANCH = imx_v2020.04_5.4.24_2.1.0_var02
- U-BOOT_BOARD_NAME = imx8mm_var_dart
- U-BOOT_DTB_DART = imx8mm-var-dart-customboard.dtb
- U-BOOT_DTB_SOM = imx8mm-var-som-symphony.dtb
- U-BOOT_DTB_SOM_10 = fsl-imx8mm-var-som-rev10.dtb
- U-BOOT_OFFSET = 33
- U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
- U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
- U-BOOT_EMMC_DEV = 2
- U-BOOT_SD_DEV = 1
- U-BOOT_UMS_DEV = 0
- SDCARD_IMG_EXT = wic
- SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
- SOC = mx8mm
- SOC_SERIES = imx8
- SOC_FAMILY = imx8m
- SPL_SD_IMAGE_NAME = N/A
- DEFAULT_TOOLCHAIN_BB_NAME = meta-toolchain-b2qt-embedded-qt6-sdk
- TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt6-sdk-imx8mm-var-dart.sh
- TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/3.1
- TOOLCHAIN_LOCATION = /opt/b2qt/3.1/environment-setup-aarch64-poky-linux
- TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/3.1/sysroots/x86_64-pokysdk-linux
- TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/3.1/sysroots/aarch64-poky-linux
- TOOLCHAIN_TYPE = aarch64-poky-linux
- YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
- YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS_DUNFELL_V12
- YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
- YOCTO_NAME = Dunfell
- YOCTO_VERSION = 3.1
- IMX_MKIMAGE_SOC_PATCH = recipes-bsp/imx-mkimage/files/imx-mkimage-imx8m-soc.mak-add-variscite-imx8mm-suppo.patch
- FSLC_BSP_VERSION = 3.1
- VARISCITE_ATF_GIT = https://github.com/varigit/imx-atf
- VARISCITE_ATF_BRANCH = imx_5.4.24_2.1.0_var01
- DTB_PREFIX = imx8mm-var-dart-customboard
- DEFAULT_DTB_EMMC = imx8mm-var-dart-dt8mcustomboard.dtb
- DEFAULT_DTB_SD = imx8mm-var-dart-dt8mcustomboard.dtb
- DEFAULT_DTB = imx8mm-var-dart-dt8mcustomboard.dtb
- USE_KMSSINK = true
dunfell-b2qt-5.4-2.1.x-mx8mm-v1.1
dunfell-b2qt-5.4-2.1.x-mx8mm-v1.2
dunfell-b2qt-5.4-2.1.x-mx8mm-v1.3
mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0
mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1