YPC DART-MX8M-MINI: Difference between revisions

Revision as of 21:20, 16 July 2022

@@ Line 2,482: / Line 2,482: @@
 | RPMSG Demos from U-Boot || Starting from BSP 5.10.72 NXP stopped supporting Cortex-m firmwares loaded from U-Boot
 <section end=RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0/>
+=== RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1 ===
+<section begin=RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/>
+|-
+| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
+|-
+| U-Boot: disable UHS, HS200, and HS400 MMC modes for sd card ||
+|-
+| U-Boot: Add eMMC (mmc2) to EFI boot targets ||
+|-
+| U-Boot: only check ptn5150 mode for usb0 ||
+|-
+| U-Boot: enable usb otg using ptn5150 ||
+|-
+| U-Boot: variscite: extcon-ptn5150: add ptn5150 driver ||
+|-
+| U-Boot: config: create specific config for Arm SystemReady; disable by default ||
+|-
+| Kernel: rework M4 dts files for DART-MX8M-MINI and VAR-SOM-MX8M-MINI boards ||
+|-
+| Kernel: imx_rproc: Init M4 stack pointer and reset vector ||
+|-
+| Kernel: Revert "remoteproc: imx_rproc: move up the function imx_rproc_detect_mode()" ||
+|-
+| Kernel: imx8_var_defconfig: enable CONFIG_USB_NET_CDC_EEM ||
+|-
+| Kernel: disable usb over current ||
+|-
+| Kernel: drivers: extcon: ptn5150: Add irq-is-id-quirk ||
+|-
+| meta-variscite-bsp: freertos-variscite: add 2.11.x support ||
+<section end=RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/>
 <section end=RELEASE_NOTES/></includeonly><!----------------- END RELEASE NOTES SECTION -------------------->