DART-MX8M-MINI rev changelog: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
Line 6: Line 6:
{{#lst:VAR-SOM-MX8M-MINI_rev_changelog|nano_mini_1v5_sw}}<!--
{{#lst:VAR-SOM-MX8M-MINI_rev_changelog|nano_mini_1v5_sw}}<!--
-->{{#lst:VAR-SOM-MX8M-MINI_rev_changelog|nano_mini_1v5_sw_patches}}
-->{{#lst:VAR-SOM-MX8M-MINI_rev_changelog|nano_mini_1v5_sw_patches}}
{{Note|Note: These patches are backward-compatible with the previous SOM revisions.}}

Revision as of 21:48, 27 June 2022

DART-MX8M-MINI changelog

DART-MX8M-MINI V1.3

Hardware Changes

Updated Board & SOM Design to support Analog Devices Inc Ethernet PHY.

Old Manufacturer Old MPN New Manufacturer New MPN
Qualcomm AR8033-AL1A-R /
AR8033-AL1B-R
Analog Devices Inc ADIN1300BCPZ

Software Changes

Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot and kernel to the latest commit ID of the branch they are already based on.
The following are the relevant patches:

Release U-Boot Kernel
Yocto Hardknott 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
1) imx8_var_defconfig: enable driver for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Dunfell / B2Qt Dunfell / Debian Bullseye (kernel 5.4.142) 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
1) imx8_var_defconfig: enable driver for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Zeus / Debian Bullseye (kernel 5.4.3) 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
1) imx8_var_defconfig: enable driver for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Warrior / Debian Buster (kernel 4.19.35) variscite: eth: ADIN1300: Disable RGMII RX clock delay 1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Sumo / B2Qt Sumo (kernel 4.14.98) variscite: eth: ADIN1300: Disable RGMII RX clock delay 1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 11.0.0_2.6.0 1) imx8mm-var-dart: Enable CONFIG_PHY_ADIN
2) phy: adin: add driver for Analog Devices ADIN1300 PHY
1) enable defconfig for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 11.0.0_2.4.0 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
1) enable defconfig for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 11.0.0_1.0.0 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
1) enable defconfig for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 10.0.0_2.6.0 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
1) enable defconfig for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 10.0.0_1.0.0 variscite: eth: ADIN1300: Disable RGMII RX clock delay 1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 9.0.0_2.0.0 variscite: eth: ADIN1300: Disable RGMII RX clock delay 1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Note: These patches are backward-compatible with the previous SOM revisions.