B2QT Platform Customization: Difference between revisions

From Variscite Wiki
Line 639: Line 639:
-->{{#vardefine:TOOLCHAIN_TARGET_CROSS_PREFIX|arm-poky-linux-gnueabi}} <!--
-->{{#vardefine:TOOLCHAIN_TARGET_CROSS_PREFIX|arm-poky-linux-gnueabi}} <!--
-->{{#vardefine:YOCTO_BRANCH|thud}} <section end=RELEASE_THUD_B2QT_V1.0_VAR-SOM-MX7/>
-->{{#vardefine:YOCTO_BRANCH|thud}} <section end=RELEASE_THUD_B2QT_V1.0_VAR-SOM-MX7/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*B2QT_BSP_VERSION = '''{{#var:B2QT_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*B2QT_GIT = '''{{#var:B2QT_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*SDCARD_IMG_EXT = '''{{#var:SDCARD_IMG_EXT}}'''
*B2QT_BUILD_RESULTS_SECTION = '''{{#var:B2QT_BUILD_RESULTS_SECTION}}'''
*B2QT_BOOT_BOARD_SECTION = '''{{#var:B2QT_BOOT_BOARD_SECTION}}'''
=== dunfell-b2qt-5.4.85-mx7-v1.0 ===
<section begin=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
-->{{#vardefine:RELEASE_NAME|dunfell-b2qt-5.4.85-mx7-v1.0}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX7}}  <!--
-->{{#vardefine:YOCTO_RELEASE_LINK|RELEASE_DUNFELL_V1.0_VAR-SOM-MX7}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|TBD}}  <!--
-->{{#vardefine:B2QT_NAME|Dunfell}}  <!--
-->{{#vardefine:YOCTO_NAME|Dunfell}}  <!--
-->{{#vardefine:YOCTO_VERSION|3.1.7}}  <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX7_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX7_BOOT_BOARD}} <!--
-->{{#vardefine:DEFAULT_IMAGE_BB_NAME|b2qt-embedded-qt5-image}} <!--
-->{{#vardefine:B2QT_BSP_VERSION|6.0.3}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-b2qt}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-b2qt}}  <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment.sh}} <!--
-->{{#vardefine:BUILD_FOLDER_OUTPUT|build-imx7-var-som}} <!--
-->{{#vardefine:MACHINE_NAME|imx7-var-som}} <!--
-->{{#vardefine:MACHINE_NAME_|imx7_var_som}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/b2qt}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|wic}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX7_SD_TREE_SUMO_OR_SUMOPLUS}} <!--
-->{{#vardefine:SOC|mx7}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX7}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:B2QT_GIT|https://github.com/varigit/meta-variscite-boot2qt.git}} <!--
-->{{#vardefine:B2QT_BRANCH|dunfell-var01}} <!--
-->{{#vardefine:B2QT_BUILD_RESULTS_SECTION|VAR-SOM-MX7_BUILD_RESULTS}} <!--
-->{{#vardefine:B2QT_BOOT_BOARD_SECTION|VAR-SOM-MX7_BOOT_BOARD}} <!--
-->{{#vardefine:B2QT_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX7_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:RELEASE_TAG|dunfell-b2qt-5.4.85-mx7-v1.0}} <!--
-->{{#vardefine:NXP_KERNEL_BRANCH|imx_5.4.24_2.1.0}} <!--
-->{{#vardefine:NXP_KERNEL_GIT|https://source.codeaurora.org/external/imx/linux-imx}} <!--
-->{{#vardefine:SUPPORTED_REV_SOM|VAR-SOM-MX7 v1.x / VAR-SOM-MX7-5G v2.x}} <!--
-->{{#vardefine:SUPPORTED_REV_CARRIER|v1.1 and higher}} <!--
-->{{#vardefine:RELEASE_DATE|4/27/2021}} <!--
-->{{#vardefine:B2QT_LINK|https://doc.qt.io/QtForDeviceCreation/}} <!--
-->{{#vardefine:QT_VERSION|6.0.3}} <!--
-->{{#vardefine:META_VARISCITE_BRANCH|dunfell}} <!--
-->{{#vardefine:META_VARISCITE_REPO|meta-variscite-fslc}} <!--
-->{{#vardefine:META_VARISCITE_GIT|https://github.com/varigit/{{#var:META_VARISCITE_REPO}}}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|5.4.85}} <!--
-->{{#vardefine:KERNEL_BRANCH|5.4-2.1.x-imx_var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX7_DTB}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2018.03_4.14.78_1.0.0_ga_var02}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx7dvar_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx7dvar_som_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx7dvar_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx7dvar_som_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx7dvar_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:BUILD_FOLDER_B2QT|build-{{#var:MACHINE_NAME}}}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_B2QT_NAME|b2qt-x86_64-meta-toolchain-b2qt-embedded-qt5-sdk-{{#var:MACHINE_NAME}}.sh}} <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/b2qt/{{#var:YOCTO_VERSION}}}} <!--
-->{{#vardefine:TOOLCHAIN_TYPE|cortexa7t2hf-neon-poky-linux-gnueabi}} <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-{{#var:TOOLCHAIN_TYPE}}}} <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/{{#var:TOOLCHAIN_TYPE}}}} <!--
-->{{#vardefine:TOOLCHAIN_TARGET_CROSS_PREFIX|arm-poky-linux-gnueabi}} <!--
-->{{#vardefine:YOCTO_BRANCH|dunfell}} <section end=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX7/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''

Revision as of 14:27, 27 April 2021

Release Notes

Based on release B2Qt: Poky , BSP: NXP , Linux: NXP [/log/?h= ]
Nature of release B2Qt Community version release
Release git [/tree/ ]
Release tag [/tree/ ]
Date
Supported platforms
SOM revision
Carrier board revision
Embedded Linux Distribution B2Qt Community BSP based
B2Qt Community BSP link [ ]
Qt version
Kernel git [/tree/ ]
Kernel branch [/tree/ ]
U-Boot git [/tree/ ]
U-Boot branch [/tree/ ]
File System build system B2Qt
Recovery SD card link [/ ]

</includeonly>

B2QT Platform Customizations

VAR-SOM-MX6

morty-b2qt-4.1.15-mx6-v1.0

thud-b2qt-4.14.78-mx6-v1.0

DART-6UL

morty-b2qt-4.1.15-mx6ul-v1.0

  • RELEASE_NAME = morty-b2qt-4.1.15-mx6ul-v1.0
  • RELEASE_LINK = RELEASE_MORTY_B2QT_V1.0_DART-6UL
  • YOCTO_NAME = Morty
  • YOCTO_VERSION = 2.2.1
  • B2QT_BSP_VERSION = 5.9
  • FSL_BSP_VERSION = L4.1.15_2.0.0-ga
  • RECOVERY_SD_NAME = morty-b2qt-4.1.15-mx6ul-v1.0.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/b2qt
  • RELEASE_NOTES_LINK = TBD
  • MACHINE_NAME = imx6ul-var-dart
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • YOCTO_BRANCH = morty
  • B2QT_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
  • B2QT_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
  • KERNEL_DTB_SECTION = DART-6UL_DTB
  • SD_TREE_SECTION = DART-6UL_SD_TREE
  • QT_PLATFORM_PLUGIN = eglfs

morty-b2qt-4.1.15-mx6ul-v1.1

  • RELEASE_NAME = morty-b2qt-4.1.15-mx6ul-v1.1
  • RELEASE_LINK = RELEASE_MORTY_B2QT_V1.1_DART-6UL
  • YOCTO_NAME = Morty
  • YOCTO_VERSION = 2.2.1
  • B2QT_BSP_VERSION = 5.9.3
  • FSL_BSP_VERSION = L4.1.15_2.0.0-ga
  • RECOVERY_SD_NAME = morty-b2qt-4.1.15-mx6ul-v1.1.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/b2qt
  • RELEASE_NOTES_LINK = TBD
  • MACHINE_NAME = imx6ul-var-dart
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • YOCTO_BRANCH = morty
  • B2QT_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
  • B2QT_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
  • KERNEL_DTB_SECTION = DART-6UL_DTB
  • SD_TREE_SECTION = DART-6UL_SD_TREE
  • QT_PLATFORM_PLUGIN = eglfs

thud-b2qt-4.14.78-mx6ul-v1.0

zeus-b2qt-5.4.3-mx6ul-v1.0

zeus-b2qt-5.4.3-mx6ul-v1.1

VAR-SOM-MX7

morty-b2qt-4.1.15-mx7-v1.0

  • RELEASE_NAME = morty-b2qt-4.1.15-mx7-v1.0
  • RELEASE_LINK = RELEASE_MORTY_B2QT_V1.0_VAR-SOM-MX7
  • YOCTO_NAME = Morty
  • YOCTO_VERSION = 2.2.1
  • B2QT_BSP_VERSION = 5.9
  • FSL_BSP_VERSION = L4.1.15_2.0.0-ga
  • RECOVERY_SD_NAME = morty-b2qt-4.1.15-mx7-v1.0.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/b2qt
  • RELEASE_NOTES_LINK = TBD
  • MACHINE_NAME = imx7-var-som
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • YOCTO_BRANCH = morty
  • B2QT_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
  • B2QT_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
  • KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
  • SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE
  • QT_PLATFORM_PLUGIN = linuxfb

thud-b2qt-4.14.78-mx7-v1.0

dunfell-b2qt-5.4.85-mx7-v1.0

DART-MX8M

b2qt-sumo-dart-mx8m-v1.0

b2qt-sumo-dart-mx8m-v1.1

dunfell-b2qt-5.4-2.1.x-mx8m-v1.0

DART-MX8M-MINI

dart-mx8mm-b2qt-v1.0

dart-mx8mm-b2qt-v1.1

dart-mx8mm-b2qt-v1.2

  • B2QT_BSP_VERSION = 5.12
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • B2QT_BRANCH = sumo-var01
  • BUILD_FOLDER = ~/var-b2qt
  • BUILD_FOLDER_B2QT = build-imx8mm-var-dart
  • BUILD_SCRIPT = . setup-environment.sh
  • DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt5-image
  • EMMC_ROOTFS_DEV = mmcblk2
  • EMMC_ROOTFS_PARTITION_NUM = p1
  • FSL_BSP_VERSION = L4.14.98-2.0.0_ga
  • HARDWARE_NAME = DART-MX8M-MINI
  • MACHINE_NAME = imx8mm-var-dart
  • META_VARISCITE_REPO = meta-variscite-imx
  • META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-imx
  • META_VARISCITE_BRANCH = sumo-imx-4.14.98-var01
  • RELEASE_NAME = b2qt-sumo-dart-mx8mm-v12
  • RELEASE_LINK = RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI
  • RECOVERY_SD_NAME = b2qt-sumo-dart-mx8mm-v12.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/b2qt
  • RELEASE_TAG = b2qt_sumo_dart-mx8mm_v12
  • IMX_ATF_PLAT = imx8mm
  • IMX_MKIMAGE_SOC = iMX8MM
  • NXP_IMX_GIT = https://source.codeaurora.org/external/imx
  • NXP_IMX_BRANCH = imx_4.14.98_2.0.0_ga
  • NXP_KERNEL_BRANCH = imx_4.14.98_2.0.0_ga
  • NXP_KERNEL_GIT = https://source.codeaurora.org/external/imx/linux-imx
  • NXP_FIRMWARE = firmware-imx-8.1.1
  • NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
  • SUPPORTED_REV_SOM = v1.1 and higher
  • SUPPORTED_REV_CARRIER = v1.1 and higher
  • B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
  • QT_VERSION = 5.12.9 RC
  • KERNEL_GIT = https://github.com/varigit/linux-imx
  • KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
  • KERNEL_DEFCONFIG = imx8_var_defconfig
  • KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
  • KERNEL_IMAGE = Image.gz
  • U-BOOT_GIT = https://github.com/varigit/uboot-imx
  • U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
  • U-BOOT_BOARD_NAME = imx8mm_var_dart
  • U-BOOT_DTB_DART = fsl-imx8mm-var-dart.dtb
  • U-BOOT_DTB_SOM = fsl-imx8mm-var-som.dtb
  • U-BOOT_DTB_SOM_10 = fsl-imx8mm-var-som-rev10.dtb
  • U-BOOT_OFFSET = 33
  • U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
  • U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
  • U-BOOT_EMMC_DEV = 1
  • U-BOOT_SD_DEV = 0
  • U-BOOT_UMS_DEV = 0
  • SDCARD_IMG_EXT = wic
  • SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
  • SOC = mx8mm
  • SOC_SERIES = imx8
  • SOC_FAMILY = imx8m
  • SPL_SD_IMAGE_NAME = N/A
  • TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt5-sdk-imx8mm-var-dart.sh
  • TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/2.5.3
  • TOOLCHAIN_LOCATION = /opt/b2qt/2.5.3/environment-setup-aarch64-poky-linux
  • TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/2.5.3/sysroots/x86_64-pokysdk-linux
  • TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/2.5.3/sysroots/aarch64-poky-linux
  • TOOLCHAIN_TYPE = aarch64-poky-linux
  • YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
  • YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
  • YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
  • YOCTO_NAME = Sumo
  • YOCTO_VERSION = 2.5.3

dunfell-b2qt-5.4-2.1.x-mx8mm-v1.0

  • B2QT_BSP_VERSION = 6.0.3
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • B2QT_BRANCH = dunfell-var01
  • BUILD_FOLDER = ~/var-b2qt
  • BUILD_FOLDER_B2QT = build-imx8mm-var-dart
  • BUILD_SCRIPT = . setup-environment.sh
  • DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt6-image
  • EMMC_ROOTFS_DEV = mmcblk2
  • EMMC_ROOTFS_PARTITION_NUM = p1
  • FSL_BSP_VERSION = 5.4.24_2.1.0
  • HARDWARE_NAME = DART-MX8M-MINI
  • MACHINE_NAME = imx8mm-var-dart
  • META_VARISCITE_REPO = meta-variscite-fslc
  • META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-fslc
  • META_VARISCITE_BRANCH = dunfell
  • RELEASE_NAME = b2qt-dunfell-dart-mx8mm-v10
  • RELEASE_LINK = RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI
  • RECOVERY_SD_NAME = b2qt-dunfell-dart-mx8mm-v10.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/b2qt
  • RELEASE_TAG = b2qt-dunfell-dart-mx8mm-v10
  • IMX_ATF_PLAT = imx8mm
  • IMX_MKIMAGE_SOC = iMX8MM
  • NXP_IMX_GIT = https://source.codeaurora.org/external/imx
  • NXP_IMX_BRANCH = imx_5.4.24_2.1.0
  • NXP_KERNEL_BRANCH = 5.4-2.1.x-imx
  • NXP_KERNEL_GIT = https://github.com/Freescale/linux-fslc
  • NXP_FIRMWARE = firmware-imx-8.8
  • NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
  • SUPPORTED_REV_SOM = v1.1 and higher
  • SUPPORTED_REV_CARRIER = v1.2c and higher
  • B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
  • QT_VERSION = 6.0.3
  • KERNEL_GIT = https://github.com/varigit/linux-imx
  • KERNEL_BRANCH = 5.4-2.1.x-imx_var01
  • KERNEL_DEFCONFIG = imx8_var_defconfig
  • KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB_DUNFELL_V12
  • KERNEL_IMAGE = Image.gz
  • KERNEL_VER = 5.4.85
  • KERNEL_RECIPE_VER = 5.4
  • U-BOOT_GIT = https://github.com/varigit/uboot-imx
  • U-BOOT_BRANCH = imx_v2020.04_5.4.24_2.1.0_var02
  • U-BOOT_BOARD_NAME = imx8mm_var_dart
  • U-BOOT_DTB_DART = imx8mm-var-dart-customboard.dtb
  • U-BOOT_DTB_SOM = imx8mm-var-som-symphony.dtb
  • U-BOOT_DTB_SOM_10 = fsl-imx8mm-var-som-rev10.dtb
  • U-BOOT_OFFSET = 33
  • U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
  • U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
  • U-BOOT_EMMC_DEV = 2
  • U-BOOT_SD_DEV = 1
  • U-BOOT_UMS_DEV = 0
  • SDCARD_IMG_EXT = wic
  • SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
  • SOC = mx8mm
  • SOC_SERIES = imx8
  • SOC_FAMILY = imx8m
  • SPL_SD_IMAGE_NAME = N/A
  • DEFAULT_TOOLCHAIN_BB_NAME = meta-toolchain-b2qt-embedded-qt6-sdk
  • TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt6-sdk-imx8mm-var-dart.sh
  • TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/3.1
  • TOOLCHAIN_LOCATION = /opt/b2qt/3.1/environment-setup-aarch64-poky-linux
  • TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/3.1/sysroots/x86_64-pokysdk-linux
  • TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/3.1/sysroots/aarch64-poky-linux
  • TOOLCHAIN_TYPE = aarch64-poky-linux
  • YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
  • YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS_DUNFELL_V12
  • YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
  • YOCTO_NAME = Dunfell
  • YOCTO_VERSION = 3.1
  • IMX_MKIMAGE_SOC_PATCH = recipes-bsp/imx-mkimage/files/imx-mkimage-imx8m-soc.mak-add-variscite-imx8mm-suppo.patch
  • FSLC_BSP_VERSION = 3.1
  • VARISCITE_ATF_GIT = https://github.com/varigit/imx-atf
  • VARISCITE_ATF_BRANCH = imx_5.4.24_2.1.0_var01
  • DTB_PREFIX = imx8mm-var-dart-customboard
  • DEFAULT_DTB_EMMC = imx8mm-var-dart-dt8mcustomboard.dtb
  • DEFAULT_DTB_SD = imx8mm-var-dart-dt8mcustomboard.dtb
  • DEFAULT_DTB = imx8mm-var-dart-dt8mcustomboard.dtb
  • USE_KMSSINK = true

VAR-SOM-MX8M-NANO

dunfell-b2qt-5.4-2.1.x-mx8mn-v1.0

  • B2QT_BSP_VERSION = 6.0.3
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • B2QT_BRANCH = dunfell-var01
  • BUILD_FOLDER = ~/var-b2qt
  • BUILD_FOLDER_B2QT = build-imx8mn-var-som
  • BUILD_SCRIPT = . setup-environment.sh
  • DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt6-image
  • EMMC_ROOTFS_DEV = mmcblk2
  • EMMC_ROOTFS_PARTITION_NUM = p1
  • FSL_BSP_VERSION = 5.4.24_2.1.0
  • HARDWARE_NAME = VAR-SOM-MX8M-NANO
  • MACHINE_NAME = imx8mn-var-som
  • META_VARISCITE_REPO = meta-variscite-fslc
  • META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-fslc
  • META_VARISCITE_BRANCH = dunfell
  • RELEASE_NAME = b2qt-dunfell-var-som-mx8mn-v10
  • RELEASE_LINK = RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX8M-NANO
  • RECOVERY_SD_NAME = b2qt-dunfell-var-som-mx8mn-v10.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8M-NANO/Software/b2qt
  • RELEASE_TAG = b2qt-dunfell-var-som-mx8mn-v10
  • IMX_ATF_PLAT = imx8mn
  • IMX_MKIMAGE_SOC = iMX8MN
  • NXP_IMX_GIT = https://source.codeaurora.org/external/imx
  • NXP_IMX_BRANCH = imx_5.4.24_2.1.0
  • NXP_KERNEL_BRANCH = 5.4-2.1.x-imx
  • NXP_KERNEL_GIT = https://github.com/Freescale/linux-fslc
  • NXP_FIRMWARE = firmware-imx-8.8
  • NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
  • SUPPORTED_REV_SOM = v1.1 and higher
  • SUPPORTED_REV_CARRIER = v1.2c and higher
  • B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
  • QT_VERSION = 6.0.3
  • KERNEL_GIT = https://github.com/varigit/linux-imx
  • KERNEL_BRANCH = 5.4-2.1.x-imx_var01
  • KERNEL_DEFCONFIG = imx8_var_defconfig
  • KERNEL_DTB_SECTION = VAR-SOM-MX8M-NANO_DTB_V5
  • KERNEL_IMAGE = Image.gz
  • KERNEL_VER = 5.4.85
  • KERNEL_RECIPE_VER = 5.4
  • U-BOOT_GIT = https://github.com/varigit/uboot-imx
  • U-BOOT_BRANCH = imx_v2020.04_5.4.24_2.1.0_var02
  • U-BOOT_BOARD_NAME = imx8mn_var_som
  • U-BOOT_DTB_SOM = imx8mn-var-som-symphony.dtb
  • U-BOOT_OFFSET = 33
  • U-BOOT_SD_DEFCONFIG = imx8mn_var_som_defconfig
  • U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
  • U-BOOT_EMMC_DEV = 2
  • U-BOOT_SD_DEV = 1
  • U-BOOT_UMS_DEV = 0
  • SDCARD_IMG_EXT = wic
  • SD_TREE_SECTION = VAR-SOM-MX8M-NANO_SD_TREE
  • SOC = mx8mn
  • SOC_SERIES = imx8
  • SOC_FAMILY = imx8m
  • SPL_SD_IMAGE_NAME = N/A
  • DEFAULT_TOOLCHAIN_BB_NAME = meta-toolchain-b2qt-embedded-qt6-sdk
  • TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt6-sdk-imx8mn-var-som.sh
  • TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/3.1
  • TOOLCHAIN_LOCATION = /opt/b2qt/3.1/environment-setup-aarch64-poky-linux
  • TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/3.1/sysroots/x86_64-pokysdk-linux
  • TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/3.1/sysroots/aarch64-poky-linux
  • TOOLCHAIN_TYPE = aarch64-poky-linux
  • YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8M-NANO_BOOT_BOARD
  • YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8M-NANO_BUILD_RESULTS_V4
  • YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
  • YOCTO_NAME = Dunfell
  • YOCTO_VERSION = 3.1
  • IMX_MKIMAGE_SOC_PATCH = recipes-bsp/imx-mkimage/files/imx-mkimage-imx8m-soc.mak-add-variscite-imx8mm-suppo.patch
  • FSLC_BSP_VERSION = 3.1
  • VARISCITE_ATF_GIT = https://github.com/varigit/imx-atf
  • VARISCITE_ATF_BRANCH = imx_5.4.24_2.1.0_var01
  • DTB_PREFIX = imx8mn-var-som-symphony
  • DEFAULT_DTB_EMMC = imx8mn-var-som-symphony.dtb
  • DEFAULT_DTB_SD = imx8mn-var-som-symphony.dtb
  • DEFAULT_DTB = imx8mn-var-som-symphony.dtb
  • USE_KMSSINK = true

VAR-SOM-MX8X

var-som-mx8x-b2qt-v1.0

var-som-mx8x-b2qt-v1.2

var-som-mx8x-b2qt-v2.0

var-som-mx8x-b2qt-v2.1

var-som-mx8x-b2qt-v2.2

VAR-SOM-MX8

var-som-mx8-b2qt-v1.0

var-som-mx8-b2qt-v1.1

Retrieved from "https://variwiki.com/index.php?title=B2QT_Platform_Customization&oldid=16485"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 27 April 2021, at 14:27.

© 2024 Variscite. All rights reserved