Yocto Build U-Boot: Difference between revisions
From Variscite Wiki
(imx8mq fix default dtb) |
No edit summary |
||
| Line 1: | Line 1: | ||
<!-- Set release according to "release" parameter in URL and use RELEASE_MORTY_V1.0_VAR-SOM-MX6 as default | <!-- Set release according to "release" parameter in URL and use RELEASE_MORTY_V1.0_VAR-SOM-MX6 as default | ||
--> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!-- | --> {{#vardefine:RELEASE_PARAM|{{#urlget:release|RELEASE_MORTY_V1.0_VAR-SOM-MX6}}}} <!-- | ||
--> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM | --> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!-- | ||
--> {{#lst:B2QT_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!-- | |||
--> {{PageHeader|Yocto Build U-Boot from source code}} {{DocImage|category1=Yocto|category2={{#var:HARDWARE_NAME}}}} __toc__ | --> {{PageHeader|Yocto Build U-Boot from source code}} {{DocImage|category1=Yocto|category2={{#var:HARDWARE_NAME}}}} __toc__ | ||
= Toolchain installation for out of Yocto builds = | = Toolchain installation for out of Yocto builds = | ||
Revision as of 15:54, 1 March 2021
Yocto Build U-Boot from source code
Toolchain installation for out of Yocto builds
To install the toolchain, follow Yocto Toolchain installation.
Build U-Boot out of Yocto tree
Obtain sources:
$ git clone https://github.com/varigit/uboot-imx.git -b imx_v2015.04_4.1.15_1.1.0_ga_var03 $ cd uboot-imx
Configure compilation environment:
$ source /opt/fslc-x11/2.2.1/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi
Cleanup everything:
$ make mrproper
Select one of the following configurations:
For booting from SD card/eMMC: $ make mx6var_som_sd_defconfig For booting from NAND flash: $ make mx6var_som_nand_defconfig
Build U-Boot:
$ make -j4
Install the built U-Boot on an SD card
$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1; sync $ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69; sync (Replace /dev/sdX with the correct device)
If you want to use our recovery SD card to flash the built U-Boot to NAND flash/eMMC, then copy it to the appropriate location in the SD card:
$ sudo cp SPL /media/rootfs/opt/images/... $ sudo cp u-boot.img /media/rootfs/opt/images/...
And eject the SD card gracefully from host machine.
Note: If you manually upgrade an existing U-Boot, and you have an old environment saved, it is a good idea to reset your environment to the new default (see Environment handling commands)
Update your U-Boot out of Yocto tree
$ git pull