Yocto Setup TFTP/NFS: Difference between revisions
From Variscite Wiki
No edit summary |
No edit summary |
||
| Line 43: | Line 43: | ||
$ sudo /etc/init.d/xinetd restart | $ sudo /etc/init.d/xinetd restart | ||
$ cd {{#var:BUILD_FOLDER}}/{{#var:BUILD_FOLDER_X11}}/ | $ cd {{#var:BUILD_FOLDER}}/{{#var:BUILD_FOLDER_X11}}/ | ||
$ cp tmp/deploy/images/{{#var:MACHINE_NAME}}/{{#var:KERNEL_IMAGE}} /tftpboot | {{#ifeq: {{#var:SOC_SERIES}} | imx8 | | ||
<br> | |||
$ sudo cp -a {{#var:BUILD_FOLDER_ABSOLUTE_PATH}}/rootfs/boot/*.dtb /tftpboot | |||
$ sudo cp {{#var:BUILD_FOLDER_ABSOLUTE_PATH}}/rootfs/boot/{{#var:KERNEL_IMAGE}} /tftpboot | |||
| | |||
<br> | |||
$ sudo cp tmp/deploy/images/{{#var:MACHINE_NAME}}/{{#var:KERNEL_IMAGE}} /tftpboot | |||
$ for f in tmp/deploy/images/{{#var:MACHINE_NAME}}/*.dtb; do if <nowiki>[[ -L $f ]] && [[</nowiki> $f != *{{#var:MACHINE_NAME}}.dtb <nowiki>]]</nowiki>; then sudo cp $f /tftpboot; fi done | $ for f in tmp/deploy/images/{{#var:MACHINE_NAME}}/*.dtb; do if <nowiki>[[ -L $f ]] && [[</nowiki> $f != *{{#var:MACHINE_NAME}}.dtb <nowiki>]]</nowiki>; then sudo cp $f /tftpboot; fi done | ||
$ sudo rename 's/{{#var:KERNEL_IMAGE}}-//' /tftpboot/{{#var:KERNEL_IMAGE}}-*.dtb | $ sudo rename 's/{{#var:KERNEL_IMAGE}}-//' /tftpboot/{{#var:KERNEL_IMAGE}}-*.dtb | ||
}} | |||
{{#ifeq: {{#var:SOC_SERIES}} | imx8 | | {{#ifeq: {{#var:SOC_SERIES}} | imx8 | | ||
Revision as of 14:26, 5 May 2020
DART-6UL - Yocto Setup TFTP/NFS
Running Yocto rootfs on Variscite board using TFTP & NFS
Host
Make sure you installed NFS server:
$ sudo apt-get install nfs-kernel-server $ cd ~/var-fslc-yocto $ sudo mkdir rootfs $ cd rootfs $ sudo tar xvf ../build_x11/tmp/deploy/images/imx6ul-var-dart/fsl-image-gui-imx6ul-var-dart.tar.gz
$ sudo gedit /etc/exports
Add the following line (change <uname> to the name of user):
/home/<uname>/var-fslc-yocto/rootfs *(rw,sync,no_root_squash,no_all_squash,no_subtree_check)
exit & save
$ sudo /etc/init.d/nfs-kernel-server restart
Make sure you installed TFTP server:
$ sudo apt-get install xinetd tftpd tftp
Verify the following:
$ ls /usr/sbin/in.tftpd
$ sudo gedit /etc/xinetd.d/tftp
service tftp
{
protocol = udp
port = 69
socket_type = dgram
wait = yes
user = nobody
server = /usr/sbin/in.tftpd
server_args = /tftpboot
disable = no
}
and run:
$ sudo mkdir /tftpboot $ sudo chmod -R 777 /tftpboot $ sudo /etc/init.d/xinetd restart $ cd ~/var-fslc-yocto/build_x11/
$ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage /tftpboot $ for f in tmp/deploy/images/imx6ul-var-dart/*.dtb; do if [[ -L $f ]] && [[ $f != *imx6ul-var-dart.dtb ]]; then sudo cp $f /tftpboot; fi done $ sudo rename 's/zImage-//' /tftpboot/zImage-*.dtb
Target
Make sure you have a serial connection to the target.
Reset and hold the space bar. This will bring you to U-Boot command line.
=> setenv serverip 192.168.1.188 => setenv nfsroot /home/<uname>/var-fslc-yocto/rootfs (change <uname> to the name of user) => setenv bootcmd run netboot => saveenv
You are all set. Connect Ethernet cable, power cycle the DART-6UL and it should boot over NFS.