Revision as of 09:13, 21 April 2020

Yocto

Documentation

Thud 2.6.2

Yocto Project Core - Thud 2.6.2

Documentation is available from www.yoctoproject.org

Sumo 2.5

Yocto Project Core - Sumo 2.5

Documentation is available from www.yoctoproject.org

Rocko 2.4.3

Yocto Project Core - Rocko 2.4.3

Documentation is available from www.yoctoproject.org

Rocko 2.4.1

Yocto Project Core - Rocko 2.4.1

Documentation is available from www.yoctoproject.org

Rocko 2.4

Yocto Project Core - Rocko 2.4

Documentation is available from www.yoctoproject.org

Pyro 2.3.1

Yocto Project Core - Pyro 2.3.1 (released on 07/21/2017)

Documentation is available from www.yoctoproject.org

Morty 2.2.1

Yocto Project Core - Morty 2.2.1 (released on 02/24/2017)

Documentation is available from www.yoctoproject.org

FSLC BSP 2.5

FSL Community BSP Release Notes 2.5 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.4

FSL Community BSP Release Notes 2.4 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.3

FSL Community BSP Release Notes 2.3 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.2

FSL Community BSP Release Notes 2.2 documentation

Documentation is available from http://freescale.github.io

FSL BSP L4.1.15_2.0.0-ga

Kernel documentation from fsl-yocto-L4.1.15_2.0.0-ga release

Documentation is available for download from fsl-yocto-imx-4.1.15_2.0.0-docs

VAR-SOM-MX6

Build Results

Image Name	Description
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB.
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB.
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

Device Tree Name	SOM type	Carrier Board type	LCD Type	Evaluation Kit name
uImage-imx6q-var-som-cap.dtb	VAR-SOM-MX6_V2 (Quad / Dual)	VAR-MX6CustomBoard	Capacitive touch	VAR-DVK-MX6_V2-PRO VAR-STK-MX6_V2
uImage-imx6q-var-som-res.dtb	VAR-SOM-MX6_V2 (Quad / Dual)	VAR-MX6CustomBoard	Resistive touch	VAR-DVK-MX6_V2-PRO VAR-STK-MX6_V2
uImage-imx6q-var-som-vsc.dtb	VAR-SOM-MX6_V2 (Quad / Dual)	VAR-SOLOCustomBoard	Capacitive LVDS touch	N/A
uImage-imx6dl-var-som-cap.dtb	VAR-SOM-MX6_V2 (DualLite / Solo)	VAR-MX6CustomBoard	Capacitive touch	N/A
uImage-imx6dl-var-som-res.dtb	VAR-SOM-MX6_V2 (DualLite / Solo)	VAR-MX6CustomBoard	Resistive touch	N/A
uImage-imx6dl-var-som-vsc.dtb	VAR-SOM-MX6_V2 (DualLite / Solo)	VAR-SOLOCustomBoard	Capacitive LVDS touch	N/A
uImage-imx6qp-var-som-cap.dtb	VAR-SOM-MX6_V2 (QuadPlus / DualPlus)	VAR-MX6CustomBoard	Capacitive touch	N/A
uImage-imx6qp-var-som-res.dtb	VAR-SOM-MX6_V2 (QuadPlus / DualPlus)	VAR-MX6CustomBoard	Resistive touch	N/A
uImage-imx6qp-var-som-vsc.dtb	VAR-SOM-MX6_V2 (QuadPlus / DualPlus)	VAR-SOLOCustomBoard	Capacitive LVDS touch	N/A
uImage-imx6dl-var-som-solo-vsc.dtb	VAR-SOM-SOLO / VAR-SOM-DUAL	VAR-SOLOCustomBoard	Capacitive LVDS touch	VAR-DVK-SOLO/DUAL VAR-STK-SOLO/DUAL
uImage-imx6dl-var-som-solo-cap.dtb	VAR-SOM-SOLO / VAR-SOM-DUAL	VAR-MX6CustomBoard	Capacitive touch	N/A
uImage-imx6dl-var-som-solo-res.dtb	VAR-SOM-SOLO / VAR-SOM-DUAL	VAR-MX6CustomBoard	Resistive touch	N/A
uImage-imx6q-var-dart.dtb	DART-MX6	VAR-DT6CustomBoard	Capacitive LVDS touch	VAR-DVK-DT6 VAR-STK-DT6

Device tree

Build individual device trees:

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6q-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6q-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-SOLOCustomBoard:
$ make -j4 imx6q-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6qp-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6qp-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-SOLOCustomBoard:
$ make -j4 imx6qp-var-som-vsc.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-solo-cap.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-solo-res.dtb

Build the device tree for VAR-SOM-SOLO on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-solo-vsc.dtb

Build the device tree for DART-MX6:
$ make -j4 imx6q-var-dart.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── SPL-nand
    ├── SPL-sd
    ├── imx6dl-var-som-cap.dtb
    ├── imx6dl-var-som-res.dtb
    ├── imx6dl-var-som-solo-cap.dtb
    ├── imx6dl-var-som-solo-res.dtb
    ├── imx6dl-var-som-solo-vsc.dtb
    ├── imx6dl-var-som-vsc.dtb
    ├── imx6q-var-dart.dtb
    ├── imx6q-var-som-cap.dtb
    ├── imx6q-var-som-res.dtb
    ├── imx6q-var-som-vsc.dtb
    ├── imx6qp-var-som-cap.dtb
    ├── imx6qp-var-som-res.dtb
    ├── imx6qp-var-som-vsc.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── uImage

Flash Recovery SD from GUI

Flash from GUI

Click the appropriate button:

Install Yocto SOLOCB NAND: Flash Yocto on NAND flash, on VAR-SOLOCustomBoard
Install Yocto SOLOCB eMMC: Flash Yocto on eMMC, on VAR-SOLOCustomBoard
Install Yocto MX6CB Res NAND: Flash Yocto with Resistive touch panel support on NAND flash, on VAR-MX6CustomBoard
Install Yocto MX6CB Cap NAND: Flash Yocto with Capacitive touch panel support on NAND flash, on VAR-MX6CustomBoard
Install Yocto MX6CB Res eMMC: Flash Yocto with Resistive touch panel support on eMMC, on VAR-MX6CustomBoard
Install Yocto MX6CB Cap eMMC: Flash Yocto with Capacitive touch panel support on eMMC, on VAR-MX6CustomBoard
Install Yocto DART (eMMC): Flash Yocto on eMMC, on VAR-DT6CustomBoard

Setting the Boot Mode

Follow the instruction below according to the appropriate carrier board type:

MX6CustomBoard

Booting your MX6CustomBoard system from SD card requires pushing the middle button while powering up the system. See picture below.

Mx6 boot.jpg

To boot a board using an SD card, follow the steps below:

Power-off the board.
Insert the SD card into the SD/MMC slot of the carrier board (DVK)
Push the middle button (Boot Select) and hold
Power-up the board
Release the middle button (Boot Select) after system starts to boot.
The board will automatically boot into Linux from the SD card

SoloCustomBoard

Booting your system requires switching the relevant DIP switch to "Boot from MMC". See picture below.

Solo boot.jpg

To boot board with SD card, Follow the steps below:

Power-off the board.
Insert the SD card into the SD/MMC slot of the carrier board (DVK)
Switch the relevant DIP switch to "Boot from MMC"
Power-up board
The board will automatically boot into Linux from SD card

DT6CustomBoard

Booting your system requires switching the relevant DIP switch to "Boot from SD card". See picture below.

Dart boot.jpg

To boot board with SD card, Follow the steps below:

Power-off the board.
Insert the SD card into the SD/MMC slot of the carrier board (DVK)
Switch the relevant DIP switch to "Boot from SD card"
Power-up board
The board will automatically boot into Linux from SD card

DART-6UL

Build Results

Image Name	How to use
fsl-image-gui-.sdcard	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash.
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
zImage-imx6ul-var-dart-emmc_wifi.dtb	Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-nand_wifi.dtb	Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-sd_emmc.dtb	Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ul-var-dart-sd_nand.dtb	Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
zImage-imx6ull-var-dart-emmc_wifi.dtb	Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-nand_wifi.dtb	Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-sd_emmc.dtb	Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ull-var-dart-sd_nand.dtb	Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)

Image Name	How to use
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
zImage-imx6ul-var-dart-emmc_wifi.dtb	Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-nand_wifi.dtb	Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-5g-emmc_wifi.dtb	Device tree blob for DART-6UL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-5g-nand_wifi.dtb	Device tree blob for DART-6UL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-sd_emmc.dtb	Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ul-var-dart-sd_nand.dtb	Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
zImage-imx6ull-var-dart-emmc_wifi.dtb	Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-nand_wifi.dtb	Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-5g-emmc_wifi.dtb	Device tree blob for DART-6ULL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-5g-nand_wifi.dtb	Device tree blob for DART-6ULL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-sd_emmc.dtb	Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ull-var-dart-sd_nand.dtb	Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)

Image Name	How to use
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ull-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)

Device tree

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-5g-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-5g-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL-5G with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-5g-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-5g-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-nand-wifi.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-5g-emmc_wifi.dtb
    ├── imx6ul-var-dart-5g-nand_wifi.dtb
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-5g-emmc_wifi.dtb
    ├── imx6ull-var-dart-5g-nand_wifi.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-5g-emmc_wifi.dtb
    ├── imx6ul-var-dart-5g-nand_wifi.dtb
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-5g-emmc_wifi.dtb
    ├── imx6ull-var-dart-5g-nand_wifi.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ull-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-nand-wifi.dtb
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── rootfs.tar.gz
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

Flash Recovery SD from GUI

Flash from GUI

Touch/Click on the appropriate icon:

Install Yocto NAND, WiFi: Flash Yocto with WiFi support to NAND flash
Install Yocto NAND, SD card: Flash Yocto with SD card support to NAND flash
Install Yocto eMMC (SD/WiFi) : Flash Yocto to eMMC (installs both SD card and WiFi dtbs to the BOOT partition and let U-Boot select between them at boot time)

Setting the Boot Mode

Booting your system from an SD card requires switching the Boot DIP switches. See picture below.

Boot switch 6ul1.jpg

"00" The current position in the picture will set the system to boot from SD card
"01" Moving the right switch will set the system to boot from eMMC
"10" Moving the left switch will set the system to boot from NAND flash
"11" is illegal.

Be aware that your system has eMMC or NAND but never both.

Booting your system from an SD card requires switching the Boot DIP switches. See picture below.
On the VAR-6ULCustomBoard (with a DART-6UL):

Boot switch 6ul1.jpg

"00" The current position in the picture will set the system to boot from SD card
"01" Moving the right switch will set the system to boot from eMMC
"10" Moving the left switch will set the system to boot from NAND flash
"11" is illegal.

Be aware that your system has eMMC or NAND but never both.

On the Concerto-Board (with a VAR-SOM-6UL):

Boot switch concerto.jpg

ON-EXT: Boot from the external storage (SD card) - the current position in the picture
OFF-INT: Boot from the SOM's internal storage (eMMC/NAND flash)

Using only one Ethernet port

Apply the following patch to the Linux kernel source, for removing the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:

diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
index f<span class="re0">79a356</span>..032ed00 <span class="nu0">100644</span>
<span class="re3">--- a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi</span>
<span class="re4">+++ b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi</span>
<span class="re6">@@ -159,17 +159,6 @@</span>
 	phy-reset-on-resume;
 	phy-handle = <&ethphy0>;
 	status = "okay";
<span class="re7">-<span class="br0">}</span>;</span>
<span class="re7">-</span>
<span class="re7">-&fec2 <span class="br0">{</span></span>
<span class="re7">-	pinctrl-names = "default";</span>
<span class="re7">-	pinctrl-<span class="nu0">0</span> = <&pinctrl_enet2>;</span>
<span class="re7">-	phy-mode = "rmii";</span>
<span class="re7">-	phy-handle = <&ethphy1>;</span>
<span class="re7">-	phy-reset-gpios=<&gpio1 <span class="nu0">10</span> <span class="nu0">1</span>>;</span>
<span class="re7">-	phy-reset-duration=<<span class="nu0">100</span>>;</span>
<span class="re7">-	phy-reset-on-resume;</span>
<span class="re7">-	status = "okay";</span>
 	mdio <span class="br0">{</span>
 		#address-cells = <<span class="nu0">1</span>>;
 		#size-cells = <<span class="nu0">0</span>>;
<span class="re6">@@ -181,14 +170,6 @@</span>
 			clock-names = "rmii-ref";
 			reg = <<span class="nu0">1</span>>;
 		<span class="br0">}</span>;
<span class="re7">-</span>
<span class="re7">-		ethphy1: ethernet-phy@3 <span class="br0">{</span></span>
<span class="re7">-			compatible = "ethernet-phy-ieee802.3-c22";</span>
<span class="re7">-			micrel,rmii-reference-clock-select-<span class="nu0">25</span>-mhz;</span>
<span class="re7">-			clocks = <&rmii_ref_clk>;</span>
<span class="re7">-			clock-names = "rmii-ref";</span>
<span class="re7">-			reg = <<span class="nu0">3</span>>;</span>
<span class="re7">-		<span class="br0">}</span>;</span>
 	<span class="br0">}</span>;
 <span class="br0">}</span>;
 
<span class="re6">@@ -460,8 +441,8 @@</span>
 			fsl,pins = <
 				MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x1b0b0	/* User LED */
 				MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x17059	/* User Button */
<span class="re7">-				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0</span>
<span class="re7">-				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0</span>
<span class="re8">+				MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0</span>
<span class="re8">+				MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0</span>
 #ifdef WIFI
 				MX6UL_PAD_GPIO1_IO03__REF_CLK_32K	0x03029	/* WLAN Slow Clock */
 #endif
<span class="re6">@@ -481,20 +462,6 @@</span>
 			>;
 		<span class="br0">}</span>;
 
<span class="re7">-		pinctrl_enet2: enet2grp <span class="br0">{</span></span>
<span class="re7">-			fsl,pins = <</span>
<span class="re7">-				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0</span>
<span class="re7">-				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0</span>
<span class="re7">-				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0</span>
<span class="re7">-				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0</span>
<span class="re7">-				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0</span>
<span class="re7">-				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0</span>
<span class="re7">-				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0</span>
<span class="re7">-				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031</span>
<span class="re7">-				MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0</span>
<span class="re7">-			>;</span>
<span class="re7">-		<span class="br0">}</span>;</span>
<span class="re7">-</span>
 		pinctrl_flexcan1: flexcan1grp<span class="br0">{</span>
 			fsl,pins = <
 				MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020

Notes:
- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build only the device trees and copy them to your SD card.
- In older kernel releases where there is no imx6ul-imx6ull-var-dart-common.dtsi file, the relevant file to edit is called imx6ul-var-dart.dtsi

To remove the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:
Edit the dtsi file of the reference carrier board in the Linux kernel source and remove the &fec1 and &fec2 nodes from it.
In case of the VAR-6ULCustomBoard (DART-6UL carrier), the file is arch/arm/boot/dts/imx6ul-imx6ull-var-dart-6ulcustomboard.dtsi.
In case of the Concerto-Board (VAR-SOM-6UL carrier), the file is arch/arm/boot/dts/imx6ul-imx6ull-var-som-concerto-board.dtsi.
The above will result in using the &fec1 node from the dtsi file of the SOM, as is (as the phy of the first Ethernet port is on the SOM), without adding the second port (which its phy is on the reference carrier board).
Notes:
- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build only the device trees and copy them to your SD card.

VAR-SOM-MX7

Build Results

Image Name	How to use
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
zImage-imx7d-var-som-emmc.dtb	Device tree blob for SOMs with eMMC.
zImage-imx7d-var-som-nand.dtb	Device tree blob for SOMs with NAND flash.
zImage-imx7d-var-som-emmc-m4.dtb	Device tree blob for SOMs with eMMC and M4 support.
zImage-imx7d-var-som-nand-m4.dtb	Device tree blob for SOMs with NAND flash and M4 support.

Device tree

Build only the device tree for VAR-SOM-MX7 with eMMC:
$ make -j4 imx7d-var-som-emmc.dtb

Build only the device tree for VAR-SOM-MX7 with NAND flash:
$ make -j4 imx7d-var-som-nand.dtb

Build only the device tree for VAR-SOM-MX7 with eMMC and M4 support:
$ make -j4 imx7d-var-som-emmc-m4.dtb

Build only the device tree for VAR-SOM-MX7 with NAND flash and M4 support:
$ make -j4 imx7d-var-som-nand-m4.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── u-boot.imx-nand
    ├── u-boot.imx-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

Flash Recovery SD from GUI

Flash from GUI

Touch/Click on the appropriate icon:

Install Yocto NAND flash: Flash Yocto to NAND flash
Install Yocto eMMC: Flash Yocto to eMMC

Setting the Boot Mode

Make sure the BOOT SELECT DIP switches on the carrier board are set correctly before you power on the board.

SW1-SW2
 0 - 0 : Boot from SD card
 1 - 0 : Boot from eMMC
 0 - 1 : Boot from NAND flash
 1 - 1 : Illegal

The VAR-SOM-MX7 SOM comes with either NAND or eMMC, but not both.

DART-MX8M

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-imx8m-var-dart-emmc-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-hdmi-4k.dtb	Device tree blob for eMMC, WIFI and HDMI 4K display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-dcss-lvds.dtb	Device tree blob for eMMC, WIFI and DCSS LVDS display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb	Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-dual-display.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration.
Image.gz-imx8m-var-dart-sd-emmc-hdmi.dtb	Device tree blob for SD, eMMC and HDMI display configuration.
Image.gz-imx8m-var-dart-sd-emmc-hdmi-4k.dtb	Device tree blob for SD, eMMC and HDMI 4K display configuration.
Image.gz-imx8m-var-dart-sd-emmc-dcss-lvds.dtb	Device tree blob for SD, eMMC and DCSS LVDS display configuration.
Image.gz-imx8m-var-dart-sd-emmc-lcdif-lvds.dtb	Device tree blob for SD, eMMC and LCDIF LVDS display configuration.
Image.gz-imx8m-var-dart-sd-emmc-dual-display.dtb	Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration.

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb	DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb	DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb	DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi-cb12.dtb	DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds-cb12.dtb	DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display-cb12.dtb	DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb	DTB for SD, eMMC and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds.dtb	DTB for SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb	DTB for SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi-cb12.dtb	DTB for SD, eMMC and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds-cb12.dtb	DTB for SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display-cb12.dtb	DTB for SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8mq-var-dart-sd-dp.dtb	DTB for eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-hdmi.dtb	DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds.dtb	DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-dp.dtb	DTB for eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb	DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-hdmi-cb12.dtb	DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-cb12.dtb	DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi-cb12.dtb	DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-dp.dtb	DTB for eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-hdmi.dtb	DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds.dtb	DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-dp.dtb	DTB for eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb	DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-hdmi-cb12.dtb	DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-cb12.dtb	DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi-cb12.dtb	DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-dp.dtb	DTB for M4, eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi.dtb	DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds.dtb	DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb	DTB for M4, eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb	DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi-cb12.dtb	DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-cb12.dtb	DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi-cb12.dtb	DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-dp.dtb	DTB for M4, eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb	DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds.dtb	DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb	DTB for M4, eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb	DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi-cb12.dtb	DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-cb12.dtb	DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi-cb12.dtb	DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.

Device tree

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI display:
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI 4K display:
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi-4k.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and DCSS LVDS display:
$ make -j4 imx8m-var-dart-emmc-wifi-dcss-lvds.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and LCDIF LVDS display:
$ make -j4 imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and dual LVDS+HDMI display:
$ make -j4 imx8m-var-dart-emmc-wifi-dual-display.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and HDMI display:
$ make -j4 imx8m-var-dart-sd-emmc-hdmi.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and HDMI 4K display:
$ make -j4 imx8m-var-dart-sd-emmc-hdmi-4k.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and DCSS LVDS display:
$ make -j4 imx8m-var-dart-sd-emmc-dcss-lvds.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and LCDIF LVDS display:
$ make -j4 imx8m-var-dart-sd-emmc-lcdif-lvds.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and dual LVDS+HDMI display:
$ make -j4 imx8m-var-dart-sd-emmc-dual-display.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-lvds.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb

Build only the device tree for DART-MX8M configuration with eMMC, SD and DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-dp.dtb

Build only the device tree for DART-MX8M configuration with eMMC, SD and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-hdmi.dtb

Build only the device tree for DART-MX8M configuration with eMMC, SD and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds.dtb

Build only the device tree for DART-MX8M configuration with eMMC, SD and dual LVDS+DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M configuration with eMMC, SD and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-dp.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-hdmi.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and dual LVDS+DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, SD and DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-dp.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, SD and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, SD and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, SD and dual LVDS+DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, SD and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, WIFI and DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-dp.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, WIFI and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, WIFI and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, WIFI and dual LVDS+DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_dp_evk
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_evk
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_evk_no_hdmi
    ├── imx-boot-sd.bin -> imx-boot-imx8mq-var-dart-sd.bin-flash_evk
    └── rootfs.tar.gz

DTB File Name	Description
imx8m-var-dart-emmc-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-hdmi-4k.dtb	Device tree blob for eMMC, WIFI and HDMI 4K display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-dcss-lvds.dtb	Device tree blob for eMMC, WIFI and DCSS LVDS display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb	Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-dual-display.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
imx8m-var-dart-sd-emmc-hdmi.dtb	Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-hdmi-4k.dtb	Device tree blob for SD, eMMC and HDMI 4K display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-dcss-lvds.dtb	Device tree blob for SD, eMMC and DCSS LVDS display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-lcdif-lvds.dtb	Device tree blob for SD, eMMC and LCDIF LVDS display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-dual-display.dtb	Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.

DTB File Name	Description
fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb	Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb	Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-emmc-lvds.dtb	Device tree blob for SD, eMMC and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb	Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.

DTB File Name	Description
fsl-imx8mq-var-dart-sd-dp.dtb	Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-hdmi.dtb	Device tree blob for eMMC, SD and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds.dtb	Device tree blob for eMMC, SD and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds-dp.dtb	Device tree blob for eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb	Device tree blob for eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-wifi-dp.dtb	Device tree blob for eMMC, WIFI and DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds.dtb	Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds-dp.dtb	Device tree blob for eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-sd-dp.dtb	Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-hdmi.dtb	Device tree blob for M4, eMMC, SD and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds.dtb	Device tree blob for M4, eMMC, SD and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb	Device tree blob for M4, eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb	Device tree blob for M4, eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-wifi-dp.dtb	Device tree blob for M4, eMMC, WIFI and DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb	Device tree blob for M4, eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds.dtb	Device tree blob for M4, eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb	Device tree blob for M4, eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb	Device tree blob for M4, eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW7
 0 : Boot from SD card
 1 : Boot from eMMC

DART-MX8M-MINI

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
fsl-imx8mm-var-dart.dtb	Device tree blob for DART-MX8M-MINI
fsl-imx8mm-var-som.dtb	Device tree blob for VAR-SOM-MX8M-MINI
fsl-imx8mm-var-som-rev10.dtb	Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0

Device tree

Build only the device tree for DART-MX8M-MINI:
$ make -j4 freescale/fsl-imx8mm-var-dart.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW7
 0 : Boot from SD card
 1 : Boot from eMMC

VAR-SOM-MX8M-NANO

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8mn-var-som.dtb	Device tree blob for SD, eMMC, WIFI and LVDS display configuration.

Device tree

Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/fsl-imx8mn-var-som.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW3
 0 : Boot from SD card
 1 : Boot from eMMC

VAR-SOM-MX8X

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8qxp-var-som-wifi.dtb	DTB for WIFI configuration. SD card disabled.
Image.gz-fsl-imx8qxp-var-som-sd.dtb	DTB for SD card configuration. WIFI disabled.

Device tree

Build only the device tree for VAR-SOM-MX8X WIFI configuration:
$ make -j4 freescale/fsl-imx8qxp-var-som-wifi.dtb

Build only the device tree for VAR-SOM-MX8X SD configuration:
$ make -j4 freescale/fsl-imx8qxp-var-som-sd.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

DTB File Name	Description
fsl-imx8qxp-var-som-wifi.dtb	Device tree blob for WIFI configuration. SD card disabled.
fsl-imx8qxp-var-som-sd.dtb	Device tree blob for SD configuration. WIFI disabled.

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW3
 0 : Boot from SD card
 1 : Boot from eMMC (Internal)

VAR-SOM-MX8

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8qm-var-som-dp.dtb	DTB file for VAR-SOM-MX8 with DP display
Image.gz-fsl-imx8qm-var-som-hdmi.dtb	DTB file for VAR-SOM-MX8 with HDMI display
Image.gz-fsl-imx8qm-var-som-lvds.dtb	DTB file for VAR-SOM-MX8 with LVDS display
Image.gz-fsl-imx8qm-var-spear-dp.dtb	DTB file for SPEAR-MX8 with DP display
Image.gz-fsl-imx8qm-var-spear-hdmi.dtb	DTB file for SPEAR-MX8 with HDMI display
Image.gz-fsl-imx8qm-var-spear-lvds.dtb	DTB file for SPEAR-MX8 with LVDS display

Device tree

Build device tree for VAR-SOM-MX8 with DP display:
$ make -j4 freescale/fsl-imx8qm-var-som-db.dtb

Build device tree for VAR-SOM-MX8 with HDMI display:
$ make -j4 freescale/fsl-imx8qm-var-som-hdmi.dtb

Build device tree for VAR-SOM-MX8 with LVDS display:
$ make -j4 freescale/fsl-imx8qm-var-som-db.dtb

Build device tree for SPEAR-MX8 with DP display:
$ make -j4 freescale/fsl-imx8qm-var-spear-db.dtb

Build device tree for SPEAR-MX8 with HDMI display:
$ make -j4 freescale/fsl-imx8qm-var-spear-hdmi.dtb

Build device tree for SPEAR-MX8 with LVDS display:
$ make -j4 freescale/fsl-imx8qm-var-spear-lvds.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

DTB File Name	Description
fsl-imx8qm-var-som-dp.dtb	Device tree blob for VAR-SOM-MX8 with DP display
fsl-imx8qm-var-som-hdmi.dtb	Device tree blob for VAR-SOM-MX8 with HDMI display
fsl-imx8qm-var-som-lvds.dtb	Device tree blob for VAR-SOM-MX8 with LVDS display
fsl-imx8qm-var-spear-dp.dtb	Device tree blob for SPEAR-MX8 with DP display
fsl-imx8qm-var-spear-hdmi.dtb	Device tree blob for SPEAR-MX8 with HDMI display
fsl-imx8qm-var-spear-lvds.dtb	Device tree blob for SPEAR-MX8 with LVDS display

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW3 on VAR-SOM-MX8, SW6 on SPEAR-MX8
 0 : Boot from SD card
 1 : Boot from eMMC (Internal)

@@ Line 1: / Line 1: @@
+= Yocto =
-= Yocto =
 == Documentation ==
 === Thud 2.6.2 ===
-<section begin=YOCTO_DOC_2.6.2/>
-* Yocto Project Core - Thud 2.6.2
+*Yocto Project Core - Thud 2.6.2
 Documentation is available from [https://www.yoctoproject.org/docs/2.6.2/ref-manual/ref-manual.html www.yoctoproject.org]
-<section end=YOCTO_DOC_2.6.2/>
 === Sumo 2.5 ===
-<section begin=YOCTO_DOC_2.5/>
-* Yocto Project Core - Sumo 2.5
+*Yocto Project Core - Sumo 2.5
 Documentation is available from [https://www.yoctoproject.org/docs/2.5/ref-manual/ref-manual.html www.yoctoproject.org]
-<section end=YOCTO_DOC_2.5/>
 === Rocko 2.4.3 ===
-<section begin=YOCTO_DOC_2.4.3/>
-* Yocto Project Core - Rocko 2.4.3
+*Yocto Project Core - Rocko 2.4.3
 Documentation is available from [https://www.yoctoproject.org/docs/2.4.3/ref-manual/ref-manual.html www.yoctoproject.org]
-<section end=YOCTO_DOC_2.4.3/>
 === Rocko 2.4.1 ===
-<section begin=YOCTO_DOC_2.4.1/>
-* Yocto Project Core - Rocko 2.4.1
+*Yocto Project Core - Rocko 2.4.1
 Documentation is available from [https://www.yoctoproject.org/docs/2.4.1/ref-manual/ref-manual.html www.yoctoproject.org]
-<section end=YOCTO_DOC_2.4.1/>
 === Rocko 2.4 ===
-<section begin=YOCTO_DOC_2.4/>
-* Yocto Project Core - Rocko 2.4
+*Yocto Project Core - Rocko 2.4
 Documentation is available from [https://www.yoctoproject.org/docs/2.4/ref-manual/ref-manual.html www.yoctoproject.org]
-<section end=YOCTO_DOC_2.4/>
 === Pyro 2.3.1 ===
-<section begin=YOCTO_DOC_2.3.1/>
-* Yocto Project Core - Pyro 2.3.1 (released on 07/21/2017)
+*Yocto Project Core - Pyro 2.3.1 (released on 07/21/2017)
 Documentation is available from [https://www.yoctoproject.org/docs/2.3.1/ref-manual/ref-manual.html www.yoctoproject.org]
-<section end=YOCTO_DOC_2.3.1/>
 === Morty 2.2.1 ===
-<section begin=YOCTO_DOC_2.2.1/>
-* Yocto Project Core - Morty 2.2.1 (released on 02/24/2017)
+*Yocto Project Core - Morty 2.2.1 (released on 02/24/2017)
 Documentation is available from [https://www.yoctoproject.org/docs/2.2.1/ref-manual/ref-manual.html www.yoctoproject.org]
-<section end=YOCTO_DOC_2.2.1/>
 === FSLC BSP 2.5 ===
-<section begin=YOCTO_DOC_FSLC_BSP_2.5/>
-* FSL Community BSP Release Notes 2.5 documentation
+*FSL Community BSP Release Notes 2.5 documentation
 Documentation is available from [http://freescale.github.io/doc/release-notes/2.5/ http://freescale.github.io]
-<section end=YOCTO_DOC_FSLC_BSP_2.5/>
 === FSLC BSP 2.4 ===
-<section begin=YOCTO_DOC_FSLC_BSP_2.4/>
-* FSL Community BSP Release Notes 2.4 documentation
+*FSL Community BSP Release Notes 2.4 documentation
 Documentation is available from [http://freescale.github.io/doc/release-notes/2.4/ http://freescale.github.io]
-<section end=YOCTO_DOC_FSLC_BSP_2.4/>
 === FSLC BSP 2.3 ===
-<section begin=YOCTO_DOC_FSLC_BSP_2.3/>
-* FSL Community BSP Release Notes 2.3 documentation
+*FSL Community BSP Release Notes 2.3 documentation
 Documentation is available from [http://freescale.github.io/doc/release-notes/2.3/ http://freescale.github.io]
-<section end=YOCTO_DOC_FSLC_BSP_2.3/>
 === FSLC BSP 2.2 ===
-<section begin=YOCTO_DOC_FSLC_BSP_2.2/>
-* FSL Community BSP Release Notes 2.2 documentation
+*FSL Community BSP Release Notes 2.2 documentation
 Documentation is available from [http://freescale.github.io/doc/release-notes/2.2/ http://freescale.github.io]
-<section end=YOCTO_DOC_FSLC_BSP_2.2/>
 === FSL BSP L4.1.15_2.0.0-ga ===
-<section begin=YOCTO_DOC_FSL_BSP_L4.1.15_2.0.0-ga/>
 *Kernel documentation from fsl-yocto-L4.1.15_2.0.0-ga release
 Documentation is available for download from fsl-yocto-imx-4.1.15_2.0.0-docs
-<section end=YOCTO_DOC_FSL_BSP_L4.1.15_2.0.0-ga/>
 = VAR-SOM-MX6 =
 == Build Results ==
-<section begin=VAR-SOM-MX6_BUILD_RESULTS/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_128kbpeb.ubi
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}_128kbpeb.ubi
-| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB.
+| style="padding: 5px" | A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_256kbpeb.ubi
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}_256kbpeb.ubi
-| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB.
+| style="padding: 5px" | A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB.
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| Linux kernel image, same binary for SD card/eMMC or NAND flash.
+| style="padding: 5px" | Linux kernel image, same binary for SD card/eMMC or NAND flash.
 |-
-| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:SPL_SD_IMAGE_NAME}}
-| style="padding: 5px;"| SPL built for SD card boot or eMMC boot.
+| style="padding: 5px" | SPL built for SD card boot or eMMC boot.
 |-
-| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:SPL_NAND_IMAGE_NAME}}
-| style="padding: 5px;"| SPL built for NAND flash.
+| style="padding: 5px" | SPL built for NAND flash.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
-|-
-| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for NAND flash.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_NAND_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for NAND flash.
 |}
+<br/>
 {| class="wikitable"
 |-
-! scope="col" | Device Tree Name<br/>
+! scope="col" | Device Tree Name<br/> <br/>
-! scope="col" | SOM type<br/>
+! scope="col" | SOM type<br/><br/> <br/><br/>
-! scope="col" | Carrier Board type<br/>
+! scope="col" | Carrier Board type<br/><br/><br/> <br/><br/><br/>
-! scope="col" | LCD Type<br/>
+! scope="col" | LCD Type<br/><br/><br/><br/> <br/><br/><br/><br/>
-! scope="col" | Evaluation Kit name<br/>
+! scope="col" | Evaluation Kit name<br/><br/><br/><br/><br/> <br/><br/><br/><br/><br/>
-|-
-| style="padding: 5px;"| uImage-imx6q-var-som-cap.dtb
-| style="padding: 5px;"| VAR-SOM-MX6_V2 (Quad / Dual)
-| style="padding: 5px;"| VAR-MX6CustomBoard
-| style="padding: 5px;"| Capacitive touch
-| style="padding: 5px;"| VAR-DVK-MX6_V2-PRO<br>VAR-STK-MX6_V2
 |-
-| style="padding: 5px;"| uImage-imx6q-var-som-res.dtb
+| style="padding: 5px" | uImage-imx6q-var-som-cap.dtb
-| style="padding: 5px;"| VAR-SOM-MX6_V2 (Quad / Dual)
+| style="padding: 5px" | VAR-SOM-MX6_V2 (Quad / Dual)
-| style="padding: 5px;"| VAR-MX6CustomBoard
+| style="padding: 5px" | VAR-MX6CustomBoard
-| style="padding: 5px;"| Resistive touch
+| style="padding: 5px" | Capacitive touch
-| style="padding: 5px;"| VAR-DVK-MX6_V2-PRO<br>VAR-STK-MX6_V2
+| style="padding: 5px" | VAR-DVK-MX6_V2-PRO<br/>VAR-STK-MX6_V2
 |-
-| style="padding: 5px;"| uImage-imx6q-var-som-vsc.dtb
+| style="padding: 5px" | uImage-imx6q-var-som-res.dtb
-| style="padding: 5px;"| VAR-SOM-MX6_V2 (Quad / Dual)
+| style="padding: 5px" | VAR-SOM-MX6_V2 (Quad / Dual)
-| style="padding: 5px;"| VAR-SOLOCustomBoard
+| style="padding: 5px" | VAR-MX6CustomBoard
-| style="padding: 5px;"| Capacitive LVDS touch
+| style="padding: 5px" | Resistive touch
-| style="padding: 5px;"| N/A
+| style="padding: 5px" | VAR-DVK-MX6_V2-PRO<br/>VAR-STK-MX6_V2
 |-
-| style="padding: 5px;"| uImage-imx6dl-var-som-cap.dtb
+| style="padding: 5px" | uImage-imx6q-var-som-vsc.dtb
-| style="padding: 5px;"| VAR-SOM-MX6_V2 (DualLite / Solo)
+| style="padding: 5px" | VAR-SOM-MX6_V2 (Quad / Dual)
-| style="padding: 5px;"| VAR-MX6CustomBoard
+| style="padding: 5px" | VAR-SOLOCustomBoard
-| style="padding: 5px;"| Capacitive touch
+| style="padding: 5px" | Capacitive LVDS touch
-| style="padding: 5px;"| N/A
+| style="padding: 5px" | N/A
 |-
-| style="padding: 5px;"| uImage-imx6dl-var-som-res.dtb
+| style="padding: 5px" | uImage-imx6dl-var-som-cap.dtb
-| style="padding: 5px;"| VAR-SOM-MX6_V2 (DualLite / Solo)
+| style="padding: 5px" | VAR-SOM-MX6_V2 (DualLite / Solo)
-| style="padding: 5px;"| VAR-MX6CustomBoard
+| style="padding: 5px" | VAR-MX6CustomBoard
-| style="padding: 5px;"| Resistive touch
+| style="padding: 5px" | Capacitive touch
-| style="padding: 5px;"| N/A
+| style="padding: 5px" | N/A
 |-
-| style="padding: 5px;"| uImage-imx6dl-var-som-vsc.dtb
+| style="padding: 5px" | uImage-imx6dl-var-som-res.dtb
-| style="padding: 5px;"| VAR-SOM-MX6_V2 (DualLite / Solo)
+| style="padding: 5px" | VAR-SOM-MX6_V2 (DualLite / Solo)
-| style="padding: 5px;"| VAR-SOLOCustomBoard
+| style="padding: 5px" | VAR-MX6CustomBoard
-| style="padding: 5px;"| Capacitive LVDS touch
+| style="padding: 5px" | Resistive touch
-| style="padding: 5px;"| N/A
+| style="padding: 5px" | N/A
 |-
-| style="padding: 5px;"| uImage-imx6qp-var-som-cap.dtb
+| style="padding: 5px" | uImage-imx6dl-var-som-vsc.dtb
-| style="padding: 5px;"| VAR-SOM-MX6_V2 (QuadPlus / DualPlus)
+| style="padding: 5px" | VAR-SOM-MX6_V2 (DualLite / Solo)
-| style="padding: 5px;"| VAR-MX6CustomBoard
+| style="padding: 5px" | VAR-SOLOCustomBoard
-| style="padding: 5px;"| Capacitive touch
+| style="padding: 5px" | Capacitive LVDS touch
-| style="padding: 5px;"| N/A
+| style="padding: 5px" | N/A
 |-
-| style="padding: 5px;"| uImage-imx6qp-var-som-res.dtb
+| style="padding: 5px" | uImage-imx6qp-var-som-cap.dtb
-| style="padding: 5px;"| VAR-SOM-MX6_V2 (QuadPlus / DualPlus)
+| style="padding: 5px" | VAR-SOM-MX6_V2 (QuadPlus / DualPlus)
-| style="padding: 5px;"| VAR-MX6CustomBoard
+| style="padding: 5px" | VAR-MX6CustomBoard
-| style="padding: 5px;"| Resistive touch
+| style="padding: 5px" | Capacitive touch
-| style="padding: 5px;"| N/A
+| style="padding: 5px" | N/A
 |-
-| style="padding: 5px;"| uImage-imx6qp-var-som-vsc.dtb
+| style="padding: 5px" | uImage-imx6qp-var-som-res.dtb
-| style="padding: 5px;"| VAR-SOM-MX6_V2 (QuadPlus / DualPlus)
+| style="padding: 5px" | VAR-SOM-MX6_V2 (QuadPlus / DualPlus)
-| style="padding: 5px;"| VAR-SOLOCustomBoard
+| style="padding: 5px" | VAR-MX6CustomBoard
-| style="padding: 5px;"| Capacitive LVDS touch
+| style="padding: 5px" | Resistive touch
-| style="padding: 5px;"| N/A
+| style="padding: 5px" | N/A
 |-
-| style="padding: 5px;"| uImage-imx6dl-var-som-solo-vsc.dtb
+| style="padding: 5px" | uImage-imx6qp-var-som-vsc.dtb
-| style="padding: 5px;"| VAR-SOM-SOLO / VAR-SOM-DUAL
+| style="padding: 5px" | VAR-SOM-MX6_V2 (QuadPlus / DualPlus)
-| style="padding: 5px;"| VAR-SOLOCustomBoard
+| style="padding: 5px" | VAR-SOLOCustomBoard
-| style="padding: 5px;"| Capacitive LVDS touch
+| style="padding: 5px" | Capacitive LVDS touch
-| style="padding: 5px;"| VAR-DVK-SOLO/DUAL<br>VAR-STK-SOLO/DUAL
+| style="padding: 5px" | N/A
 |-
-| style="padding: 5px;"| uImage-imx6dl-var-som-solo-cap.dtb
+| style="padding: 5px" | uImage-imx6dl-var-som-solo-vsc.dtb
-| style="padding: 5px;"| VAR-SOM-SOLO / VAR-SOM-DUAL
+| style="padding: 5px" | VAR-SOM-SOLO / VAR-SOM-DUAL
-| style="padding: 5px;"| VAR-MX6CustomBoard
+| style="padding: 5px" | VAR-SOLOCustomBoard
-| style="padding: 5px;"| Capacitive touch
+| style="padding: 5px" | Capacitive LVDS touch
-| style="padding: 5px;"| N/A
+| style="padding: 5px" | VAR-DVK-SOLO/DUAL<br/>VAR-STK-SOLO/DUAL
 |-
-| style="padding: 5px;"| uImage-imx6dl-var-som-solo-res.dtb
+| style="padding: 5px" | uImage-imx6dl-var-som-solo-cap.dtb
-| style="padding: 5px;"| VAR-SOM-SOLO / VAR-SOM-DUAL
+| style="padding: 5px" | VAR-SOM-SOLO / VAR-SOM-DUAL
-| style="padding: 5px;"| VAR-MX6CustomBoard
+| style="padding: 5px" | VAR-MX6CustomBoard
-| style="padding: 5px;"| Resistive touch
+| style="padding: 5px" | Capacitive touch
-| style="padding: 5px;"| N/A
+| style="padding: 5px" | N/A
 |-
-| style="padding: 5px;"| uImage-imx6q-var-dart.dtb
+| style="padding: 5px" | uImage-imx6dl-var-som-solo-res.dtb
-| style="padding: 5px;"| DART-MX6
+| style="padding: 5px" | VAR-SOM-SOLO / VAR-SOM-DUAL
-| style="padding: 5px;"| VAR-DT6CustomBoard
+| style="padding: 5px" | VAR-MX6CustomBoard
-| style="padding: 5px;"| Capacitive LVDS touch
+| style="padding: 5px" | Resistive touch
-| style="padding: 5px;"| VAR-DVK-DT6<br>VAR-STK-DT6
+| style="padding: 5px" | N/A
 |-
+| style="padding: 5px" | uImage-imx6q-var-dart.dtb
+| style="padding: 5px" | DART-MX6
+| style="padding: 5px" | VAR-DT6CustomBoard
+| style="padding: 5px" | Capacitive LVDS touch
+| style="padding: 5px" | VAR-DVK-DT6<br/>VAR-STK-DT6
 |}
-<section end=VAR-SOM-MX6_BUILD_RESULTS/>
+<br/><br/><br/><br/><br/>
 == Device tree ==
-<section begin=VAR-SOM-MX6_DTB/>
+<pre>Build individual device trees:
-<pre>
-Build individual device trees:
 Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with capacitive touchscreen:
@@ Line 234: / Line 249: @@
 $ make -j4 imx6q-var-dart.dtb
 </pre>
-<section end=VAR-SOM-MX6_DTB/>
 == SD card image file tree ==
-<section begin=VAR-SOM-MX6_SD_TREE/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── SPL-nand
@@ Line 263: / Line 276: @@
      └── uImage
 </pre>
-<section end=VAR-SOM-MX6_SD_TREE/>
-== Flash Recovery SD from GUI ==
-<section begin=VAR-SOM-MX6_FLASH_SD_FROM_GUI/>
+== Flash Recovery SD from GUI ==
 === Flash from GUI ===
-[[File:VAR-SOM-MX6_Pyro_Recovery.png]]
-<br><br>
+[[File:VAR-SOM-MX6 Pyro Recovery.png]]<br/><br/>Click the appropriate button:
-Click the appropriate button:
-* Install Yocto SOLOCB NAND: Flash Yocto on NAND flash, on [http://www.variscite.com/products/single-board-computers/var-solocustomboard VAR-SOLOCustomBoard]
+*Install Yocto SOLOCB NAND: Flash Yocto on NAND flash, on [http://www.variscite.com/products/single-board-computers/var-solocustomboard VAR-SOLOCustomBoard]
-* Install Yocto SOLOCB eMMC: Flash Yocto on eMMC, on [http://www.variscite.com/products/single-board-computers/var-solocustomboard VAR-SOLOCustomBoard]
+*Install Yocto SOLOCB eMMC: Flash Yocto on eMMC, on [http://www.variscite.com/products/single-board-computers/var-solocustomboard VAR-SOLOCustomBoard]
-* Install Yocto MX6CB Res NAND: Flash Yocto with Resistive touch panel support on NAND flash, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
+*Install Yocto MX6CB Res NAND: Flash Yocto with Resistive touch panel support on NAND flash, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
-* Install Yocto MX6CB Cap NAND: Flash Yocto with Capacitive touch panel support on NAND flash, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
+*Install Yocto MX6CB Cap NAND: Flash Yocto with Capacitive touch panel support on NAND flash, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
-* Install Yocto MX6CB Res eMMC: Flash Yocto with Resistive touch panel support on eMMC, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
+*Install Yocto MX6CB Res eMMC: Flash Yocto with Resistive touch panel support on eMMC, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
-* Install Yocto MX6CB Cap eMMC: Flash Yocto with Capacitive touch panel support on eMMC, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
+*Install Yocto MX6CB Cap eMMC: Flash Yocto with Capacitive touch panel support on eMMC, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
-* Install Yocto DART (eMMC): Flash Yocto on eMMC, on [http://www.variscite.com/products/single-board-computers/dt6customboard VAR-DT6CustomBoard]
+*Install Yocto DART (eMMC): Flash Yocto on eMMC, on [http://www.variscite.com/products/single-board-computers/dt6customboard VAR-DT6CustomBoard]
-<section end=VAR-SOM-MX6_FLASH_SD_FROM_GUI/>
 == Setting the Boot Mode ==
-<section begin=VAR-SOM-MX6_BOOT_BOARD/>
 Follow the instruction below according to the appropriate carrier board type:
 === MX6CustomBoard ===
-Booting your MX6CustomBoard system from SD card requires pushing the middle button while powering up the system. See picture below.
-[[File:Mx6_boot.jpg|thumb|none|upright=2.0]]
+Booting your MX6CustomBoard system from SD card requires pushing the middle button while powering up the system. See picture below. [[File:Mx6 boot.jpg|thumb|none|Mx6 boot.jpg]] To boot a board using an SD card, follow the steps below:
-To boot a board using an SD card, follow the steps below:<br>
-* Power-off the board.
+*Power-off the board.
-* Insert the SD card into the SD/MMC slot of the carrier board (DVK)
+*Insert the SD card into the SD/MMC slot of the carrier board (DVK)
-* Push the middle button (Boot Select) and hold
+*Push the middle button (Boot Select) and hold
-* Power-up the board
+*Power-up the board
-* Release the middle button (Boot Select) after system starts to boot.
+*Release the middle button (Boot Select) after system starts to boot.
-* The board will automatically boot into Linux from the SD card
+*The board will automatically boot into Linux from the SD card
 === SoloCustomBoard ===
-Booting your system requires switching the relevant DIP switch to "Boot from MMC". See picture below.
-[[File:Solo_boot.jpg|thumb|none|upright=2.0]]
-To boot board with SD card, Follow the steps below:<br>
+Booting your system requires switching the relevant DIP switch to "Boot from MMC". See picture below. [[File:Solo boot.jpg|thumb|none|Solo boot.jpg]]
+To boot board with SD card, Follow the steps below:
 *Power-off the board.
@@ Line 307: / Line 322: @@
 === DT6CustomBoard ===
-Booting your system requires switching the relevant DIP switch to "Boot from SD card". See picture below.
-[[File:Dart_boot.jpg|thumb|none|upright=2.0]]
-To boot board with SD card, Follow the steps below:<br>
+Booting your system requires switching the relevant DIP switch to "Boot from SD card". See picture below. [[File:Dart boot.jpg|thumb|none|Dart boot.jpg]]
+To boot board with SD card, Follow the steps below:
 *Power-off the board.
@@ Line 317: / Line 332: @@
 *Power-up board
 *The board will automatically boot into Linux from SD card
-<section end=VAR-SOM-MX6_BOOT_BOARD/>
-= DART-6UL=
+= DART-6UL =
 == Build Results ==
-<section begin=DART-6UL_BUILD_RESULTS_MORTY/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | How to use<br/>
+! scope="col" | How to use<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.ubi
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash.
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.ubi
-| style="padding: 5px;"| Linux kernel image, same binary for SD card/eMMC or NAND flash.
+| style="padding: 5px" | A complete UBI image containing a UBIFS volume, for writing to NAND flash.
 |-
-| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| SPL built for SD card boot or eMMC boot.
+| style="padding: 5px" | Linux kernel image, same binary for SD card/eMMC or NAND flash.
 |-
-| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:SPL_SD_IMAGE_NAME}}
-| style="padding: 5px;"| SPL built for NAND flash.
+| style="padding: 5px" | SPL built for SD card boot or eMMC boot.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:SPL_NAND_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
+| style="padding: 5px" | SPL built for NAND flash.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for NAND flash.
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_NAND_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for NAND flash.
 |}
+<br/><br/>
 {| class="wikitable"
 |-
@@ Line 358: / Line 374: @@
 ! scope="col" | Description
 |-
-| style="padding: 5px;"| zImage-imx6ul-var-dart-emmc_wifi.dtb
+| style="padding: 5px" | zImage-imx6ul-var-dart-emmc_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
-|-
-| style="padding: 5px;"| zImage-imx6ul-var-dart-nand_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ul-var-dart-sd_emmc.dtb
+| style="padding: 5px" | zImage-imx6ul-var-dart-nand_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ul-var-dart-sd_nand.dtb
+| style="padding: 5px" | zImage-imx6ul-var-dart-sd_emmc.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ull-var-dart-emmc_wifi.dtb
+| style="padding: 5px" | zImage-imx6ul-var-dart-sd_nand.dtb
-| style="padding: 5px;"| Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ull-var-dart-nand_wifi.dtb
+| style="padding: 5px" | zImage-imx6ull-var-dart-emmc_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
+| style="padding: 5px" | Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ull-var-dart-sd_emmc.dtb
+| style="padding: 5px" | zImage-imx6ull-var-dart-nand_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
+| style="padding: 5px" | Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ull-var-dart-sd_nand.dtb
+| style="padding: 5px" | zImage-imx6ull-var-dart-sd_emmc.dtb
-| style="padding: 5px;"| Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)
+| style="padding: 5px" | Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
 |-
+| style="padding: 5px" | zImage-imx6ull-var-dart-sd_nand.dtb
+| style="padding: 5px" | Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)
 |}
-<section end=DART-6UL_BUILD_RESULTS_MORTY/>
-<section begin=DART-6UL_BUILD_RESULTS/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | How to use<br/>
+! scope="col" | How to use<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_128kbpeb.ubi
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_256kbpeb.ubi
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}_128kbpeb.ubi
-| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
+| style="padding: 5px" | A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}_256kbpeb.ubi
-| style="padding: 5px;"| Linux kernel image, same binary for SD card/eMMC or NAND flash.
+| style="padding: 5px" | A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
 |-
-| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| SPL built for SD card boot or eMMC boot.
+| style="padding: 5px" | Linux kernel image, same binary for SD card/eMMC or NAND flash.
 |-
-| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:SPL_SD_IMAGE_NAME}}
-| style="padding: 5px;"| SPL built for NAND flash.
+| style="padding: 5px" | SPL built for SD card boot or eMMC boot.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:SPL_NAND_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
+| style="padding: 5px" | SPL built for NAND flash.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for NAND flash.
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_NAND_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for NAND flash.
 |}
+<br/><br/>
 {| class="wikitable"
 |-
@@ Line 425: / Line 439: @@
 ! scope="col" | Description
 |-
-| style="padding: 5px;"| zImage-imx6ul-var-dart-emmc_wifi.dtb
+| style="padding: 5px" | zImage-imx6ul-var-dart-emmc_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ul-var-dart-nand_wifi.dtb
+| style="padding: 5px" | zImage-imx6ul-var-dart-nand_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ul-var-dart-5g-emmc_wifi.dtb
+| style="padding: 5px" | zImage-imx6ul-var-dart-5g-emmc_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ul-var-dart-5g-nand_wifi.dtb
+| style="padding: 5px" | zImage-imx6ul-var-dart-5g-nand_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ul-var-dart-sd_emmc.dtb
+| style="padding: 5px" | zImage-imx6ul-var-dart-sd_emmc.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ul-var-dart-sd_nand.dtb
+| style="padding: 5px" | zImage-imx6ul-var-dart-sd_nand.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ull-var-dart-emmc_wifi.dtb
+| style="padding: 5px" | zImage-imx6ull-var-dart-emmc_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
+| style="padding: 5px" | Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ull-var-dart-nand_wifi.dtb
+| style="padding: 5px" | zImage-imx6ull-var-dart-nand_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
+| style="padding: 5px" | Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ull-var-dart-5g-emmc_wifi.dtb
+| style="padding: 5px" | zImage-imx6ull-var-dart-5g-emmc_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6ULL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
+| style="padding: 5px" | Device tree blob for DART-6ULL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ull-var-dart-5g-nand_wifi.dtb
+| style="padding: 5px" | zImage-imx6ull-var-dart-5g-nand_wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6ULL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
+| style="padding: 5px" | Device tree blob for DART-6ULL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
 |-
-| style="padding: 5px;"| zImage-imx6ull-var-dart-sd_emmc.dtb
+| style="padding: 5px" | zImage-imx6ull-var-dart-sd_emmc.dtb
-| style="padding: 5px;"| Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
+| style="padding: 5px" | Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
-|-
-| style="padding: 5px;"| zImage-imx6ull-var-dart-sd_nand.dtb
-| style="padding: 5px;"| Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)
 |-
+| style="padding: 5px" | zImage-imx6ull-var-dart-sd_nand.dtb
+| style="padding: 5px" | Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)
 |}
-<section end=DART-6UL_BUILD_RESULTS/>
-<section begin=DART-6UL_BUILD_RESULTS_THUD_1_1_PLUS/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | How to use<br/>
+! scope="col" | How to use<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_128kbpeb.ubi
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_256kbpeb.ubi
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}_128kbpeb.ubi
-| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
+| style="padding: 5px" | A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}_256kbpeb.ubi
-| style="padding: 5px;"| Linux kernel image, same binary for SD card/eMMC or NAND flash.
+| style="padding: 5px" | A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
 |-
-| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| SPL built for SD card boot or eMMC boot.
+| style="padding: 5px" | Linux kernel image, same binary for SD card/eMMC or NAND flash.
 |-
-| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:SPL_SD_IMAGE_NAME}}
-| style="padding: 5px;"| SPL built for NAND flash.
+| style="padding: 5px" | SPL built for SD card boot or eMMC boot.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:SPL_NAND_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
+| style="padding: 5px" | SPL built for NAND flash.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for NAND flash.
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_NAND_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for NAND flash.
 |}
+<br/><br/>
 {| class="wikitable"
 |-
@@ Line 505: / Line 518: @@
 ! scope="col" | Description
 |-
-| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
+| style="padding: 5px" | imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
 |-
-| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
+| style="padding: 5px" | imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
 |-
-| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
+| style="padding: 5px" | imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
 |-
-| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
+| style="padding: 5px" | imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
 |-
-| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
+| style="padding: 5px" | imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
 |-
-| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
+| style="padding: 5px" | imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
 |-
-| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
+| style="padding: 5px" | imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
 |-
-| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
+| style="padding: 5px" | imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
 |-
-| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
+| style="padding: 5px" | imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
 |-
-| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
+| style="padding: 5px" | imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
 |-
-| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
+| style="padding: 5px" | imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
 |-
-| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
+| style="padding: 5px" | imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
-| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
+| style="padding: 5px" | Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
 |-
-| style="padding: 5px;"| imx6ull-var-som-concerto-board-emmc-sd-card.dtb
+| style="padding: 5px" | imx6ull-var-som-concerto-board-emmc-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
 |-
-| style="padding: 5px;"| imx6ull-var-som-concerto-board-emmc-wifi.dtb
+| style="padding: 5px" | imx6ull-var-som-concerto-board-emmc-wifi.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
 |-
-| style="padding: 5px;"| imx6ull-var-som-concerto-board-nand-sd-card.dtb
+| style="padding: 5px" | imx6ull-var-som-concerto-board-nand-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
 |-
-| style="padding: 5px;"| imx6ull-var-som-concerto-board-nand-wifi.dtb
+| style="padding: 5px" | imx6ull-var-som-concerto-board-nand-wifi.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
 |-
-| style="padding: 5px;"| imx6ul-var-som-concerto-board-emmc-sd-card.dtb
+| style="padding: 5px" | imx6ul-var-som-concerto-board-emmc-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
 |-
-| style="padding: 5px;"| imx6ul-var-som-concerto-board-emmc-wifi.dtb
+| style="padding: 5px" | imx6ul-var-som-concerto-board-emmc-wifi.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
 |-
-| style="padding: 5px;"| imx6ul-var-som-concerto-board-nand-sd-card.dtb
+| style="padding: 5px" | imx6ul-var-som-concerto-board-nand-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
 |-
-| style="padding: 5px;"| imx6ul-var-som-concerto-board-nand-wifi.dtb
+| style="padding: 5px" | imx6ul-var-som-concerto-board-nand-wifi.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
 |-
-| style="padding: 5px;"| imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
+| style="padding: 5px" | imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
 |-
-| style="padding: 5px;"| imx6ulz-var-som-concerto-board-emmc-wifi.dtb
+| style="padding: 5px" | imx6ulz-var-som-concerto-board-emmc-wifi.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
 |-
-| style="padding: 5px;"| imx6ulz-var-som-concerto-board-nand-sd-card.dtb
+| style="padding: 5px" | imx6ulz-var-som-concerto-board-nand-sd-card.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
-|-
-| style="padding: 5px;"| imx6ulz-var-som-concerto-board-nand-wifi.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
 |-
+| style="padding: 5px" | imx6ulz-var-som-concerto-board-nand-wifi.dtb
+| style="padding: 5px" | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
 |}
-<section end=DART-6UL_BUILD_RESULTS_THUD_1_1_PLUS/>
 == Device tree ==
-<section begin=DART-6UL_DTB/>
+<pre>Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
-<pre>
-Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
 $ make -j4 imx6ul-var-dart-emmc_wifi.dtb
@@ Line 607: / Line 618: @@
 $ make -j4 imx6ull-var-dart-sd_nand.dtb
 </pre>
-<section end=DART-6UL_DTB/>
-<section begin=DART-6UL_DTB_PYRO_PLUS/>
+<pre>Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
-<pre>
-Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
 $ make -j4 imx6ul-var-dart-emmc_wifi.dtb
@@ Line 647: / Line 655: @@
 $ make -j4 imx6ull-var-dart-sd_nand.dtb
 </pre>
-<section end=DART-6UL_DTB_PYRO_PLUS/>
-<section begin=DART-6UL_DTB_THUD_1_1_PLUS/>
+<pre>Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
-<pre>
-Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
 $ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
@@ Line 723: / Line 728: @@
 $ make -j4 imx6ulz-var-som-concerto-board-nand-wifi.dtb
 </pre>
-<section end=DART-6UL_DTB_THUD_1_1_PLUS/>
 == SD card image file tree ==
-<section begin=DART-6UL_SD_TREE/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx6ul-var-dart-emmc_wifi.dtb
@@ Line 746: / Line 749: @@
      └── zImage
 </pre>
-<section end=DART-6UL_SD_TREE/>
-<section begin=DART-6UL_SD_TREE_PYRO_PLUS/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx6ul-var-dart-5g-emmc_wifi.dtb
@@ Line 772: / Line 772: @@
      └── zImage
 </pre>
-<section end=DART-6UL_SD_TREE_PYRO_PLUS/>
-<section begin=DART-6UL_SD_TREE_SUMOPLUS/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx6ul-var-dart-5g-emmc_wifi.dtb
@@ Line 799: / Line 796: @@
      └── zImage
 </pre>
-<section end=DART-6UL_SD_TREE_SUMOPLUS/>
-<section begin=DART-6UL_SD_TREE_THUD_1_1_PLUS/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
@@ Line 838: / Line 832: @@
      └── zImage
 </pre>
-<section end=DART-6UL_SD_TREE_THUD_1_1_PLUS/>
-== Flash Recovery SD from GUI ==
-<section begin=DART-6UL_FLASH_SD_FROM_GUI/>
+== Flash Recovery SD from GUI ==
 === Flash from GUI ===
-[[File:DART-6UL_Recovery_Sumo.png]]
-<br><br>
+[[File:DART-6UL Recovery Sumo.png]]<br/><br/>Touch/Click on the appropriate icon:
-Touch/Click on the appropriate icon:
-* Install Yocto NAND, WiFi: Flash Yocto with WiFi support to NAND flash
+*Install Yocto NAND, WiFi: Flash Yocto with WiFi support to NAND flash
-* Install Yocto NAND, SD card: Flash Yocto with SD card support to NAND flash
+*Install Yocto NAND, SD card: Flash Yocto with SD card support to NAND flash
-* Install Yocto eMMC (SD/WiFi) : Flash Yocto to eMMC (installs both SD card and WiFi dtbs to the BOOT partition and let U-Boot select between them at boot time)
+*Install Yocto eMMC (SD/WiFi)&nbsp;: Flash Yocto to eMMC (installs both SD card and WiFi dtbs to the BOOT partition and let U-Boot select between them at boot time)
-<section end=DART-6UL_FLASH_SD_FROM_GUI/>
 == Setting the Boot Mode ==
-<section begin=DART-6UL_BOOT_BOARD_NO_CONCERTO/>
-Booting your system from an SD card requires switching the Boot DIP switches. See picture below.
+Booting your system from an SD card requires switching the Boot DIP switches. See picture below. [[File:Boot switch 6ul1.jpg|thumb|none|Boot switch 6ul1.jpg]]
-[[File:Boot_switch_6ul1.jpg|thumb|none|upright=2.0]]
-* "00" The current position in the picture will set the system to boot from SD card
+*"00" The current position in the picture will set the system to boot from SD card
-* "01" Moving the right switch will set the system to boot from eMMC
+*"01" Moving the right switch will set the system to boot from eMMC
-* "10" Moving the left switch will set the system to boot from NAND flash
+*"10" Moving the left switch will set the system to boot from NAND flash
-* "11" is illegal.
+*"11" is illegal.
 {{Note|Be aware that your system has eMMC or NAND but never both.}}
-<section end=DART-6UL_BOOT_BOARD_NO_CONCERTO/>
-<section begin=DART-6UL_BOOT_BOARD/>
-Booting your system from an SD card requires switching the Boot DIP switches. See picture below.<br>
-'''On the VAR-6ULCustomBoard (with a DART-6UL)''':
-[[File:Boot_switch_6ul1.jpg|thumb|none|upright=2.0]]
-* "00" The current position in the picture will set the system to boot from SD card
-* "01" Moving the right switch will set the system to boot from eMMC
-* "10" Moving the left switch will set the system to boot from NAND flash
-* "11" is illegal.
-{{Note|Be aware that your system has eMMC or NAND but never both.}}<br>
-<br>
-'''On the Concerto-Board (with a VAR-SOM-6UL)''':
-[[File:boot_switch_concerto.jpg|thumb|none|upright=2.0]]
-* ON-EXT: Boot from the external storage (SD card) - the current position in the picture
-* OFF-INT: Boot from the SOM's internal storage (eMMC/NAND flash)
-<section end=DART-6UL_BOOT_BOARD/>
-== Using only one Ethernet port ==
-<section begin=DART-6UL_USING_ONE_ETH_PORT_OLD/>
+Booting your system from an SD card requires switching the Boot DIP switches. See picture below.<br/>'''On the VAR-6ULCustomBoard (with a DART-6UL)''': [[File:Boot switch 6ul1.jpg|thumb|none|Boot switch 6ul1.jpg]]
+*"00" The current position in the picture will set the system to boot from SD card
+*"01" Moving the right switch will set the system to boot from eMMC
+*"10" Moving the left switch will set the system to boot from NAND flash
+*"11" is illegal.
+{{Note|Be aware that your system has eMMC or NAND but never both.}}<br/><br/>'''On the Concerto-Board (with a VAR-SOM-6UL)''': [[File:Boot switch concerto.jpg|thumb|none|Boot switch concerto.jpg]]
+*ON-EXT: Boot from the external storage (SD card) - the current position in the picture
+*OFF-INT: Boot from the SOM's internal storage (eMMC/NAND flash)
+== Using only one Ethernet port ==
 Apply the following patch to the Linux kernel source, for removing the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:
+<div dir="ltr" class="mw-geshi mw-code mw-content-ltr"><div class="diff source-diff"><pre class="de1">diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
-<syntaxhighlight lang="diff">
+index f<span class="re0">79a356</span>..032ed00 <span class="nu0">100644</span>
-diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
+<span class="re3">--- a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi</span>
-index f79a356..032ed00 100644
+<span class="re4">+++ b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi</span>
---- a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
+<span class="re6">@@ -159,17 +159,6 @@</span>
-+++ b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
-@@ -159,17 +159,6 @@
   	phy-reset-on-resume;
   	phy-handle = <&ethphy0>;
   	status = "okay";
--};
+<span class="re7">-<span class="br0">}</span>;</span>
--
+<span class="re7">-</span>
--&fec2 {
+<span class="re7">-&fec2 <span class="br0">{</span></span>
--	pinctrl-names = "default";
+<span class="re7">-	pinctrl-names = "default";</span>
--	pinctrl-0 = <&pinctrl_enet2>;
+<span class="re7">-	pinctrl-<span class="nu0">0</span> = <&pinctrl_enet2>;</span>
--	phy-mode = "rmii";
+<span class="re7">-	phy-mode = "rmii";</span>
--	phy-handle = <&ethphy1>;
+<span class="re7">-	phy-handle = <&ethphy1>;</span>
--	phy-reset-gpios=<&gpio1 10 1>;
+<span class="re7">-	phy-reset-gpios=<&gpio1 <span class="nu0">10</span> <span class="nu0">1</span>>;</span>
--	phy-reset-duration=<100>;
+<span class="re7">-	phy-reset-duration=<<span class="nu0">100</span>>;</span>
--	phy-reset-on-resume;
+<span class="re7">-	phy-reset-on-resume;</span>
--	status = "okay";
+<span class="re7">-	status = "okay";</span>
-  	mdio {
+  	mdio <span class="br0">{</span>
-  		#address-cells = <1>;
+  		#address-cells = <<span class="nu0">1</span>>;
-  		#size-cells = <0>;
+  		#size-cells = <<span class="nu0">0</span>>;
-@@ -181,14 +170,6 @@
+<span class="re6">@@ -181,14 +170,6 @@</span>
   			clock-names = "rmii-ref";
-  			reg = <1>;
+  			reg = <<span class="nu0">1</span>>;
-  		};
+  		<span class="br0">}</span>;
--
+<span class="re7">-</span>
--		ethphy1: ethernet-phy@3 {
+<span class="re7">-		ethphy1: ethernet-phy@3 <span class="br0">{</span></span>
--			compatible = "ethernet-phy-ieee802.3-c22";
+<span class="re7">-			compatible = "ethernet-phy-ieee802.3-c22";</span>
--			micrel,rmii-reference-clock-select-25-mhz;
+<span class="re7">-			micrel,rmii-reference-clock-select-<span class="nu0">25</span>-mhz;</span>
--			clocks = <&rmii_ref_clk>;
+<span class="re7">-			clocks = <&rmii_ref_clk>;</span>
--			clock-names = "rmii-ref";
+<span class="re7">-			clock-names = "rmii-ref";</span>
--			reg = <3>;
+<span class="re7">-			reg = <<span class="nu0">3</span>>;</span>
--		};
+<span class="re7">-		<span class="br0">}</span>;</span>
-  	};
+  	<span class="br0">}</span>;
-  };
+  <span class="br0">}</span>;
+&nbsp;
-@@ -460,8 +441,8 @@
+<span class="re6">@@ -460,8 +441,8 @@</span>
   			fsl,pins = <
   				MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x1b0b0	/* User LED */
   				MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x17059	/* User Button */
--				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+<span class="re7">-				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0</span>
--				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+<span class="re7">-				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0</span>
-+				MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+<span class="re8">+				MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0</span>
-+				MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+<span class="re8">+				MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0</span>
   #ifdef WIFI
   				MX6UL_PAD_GPIO1_IO03__REF_CLK_32K	0x03029	/* WLAN Slow Clock */
   #endif
-@@ -481,20 +462,6 @@
+<span class="re6">@@ -481,20 +462,6 @@</span>
   			>;
-  		};
+  		<span class="br0">}</span>;
+&nbsp;
--		pinctrl_enet2: enet2grp {
+<span class="re7">-		pinctrl_enet2: enet2grp <span class="br0">{</span></span>
--			fsl,pins = <
+<span class="re7">-			fsl,pins = <</span>
--				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+<span class="re7">-				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0</span>
--				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+<span class="re7">-				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0</span>
--				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+<span class="re7">-				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0</span>
--				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+<span class="re7">-				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0</span>
--				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+<span class="re7">-				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0</span>
--				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+<span class="re7">-				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0</span>
--				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+<span class="re7">-				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0</span>
--				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+<span class="re7">-				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031</span>
--				MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0
+<span class="re7">-				MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0</span>
--			>;
+<span class="re7">-			>;</span>
--		};
+<span class="re7">-		<span class="br0">}</span>;</span>
--
+<span class="re7">-</span>
-  		pinctrl_flexcan1: flexcan1grp{
+  		pinctrl_flexcan1: flexcan1grp<span class="br0">{</span>
   			fsl,pins = <
-  				MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020
+  				MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020</pre></div></div>
-</syntaxhighlight>
+Notes:<br/>- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build ''only'' the device trees and copy them to your SD card.<br/>- In older kernel releases where there is no imx6ul-imx6ull-var-dart-common.dtsi file, the relevant file to edit is called imx6ul-var-dart.dtsi
+To remove the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:<br/>Edit the dtsi file of the reference carrier board in the Linux kernel source and remove the ''&fec1'' and ''&fec2'' nodes from it.<br/>In case of the VAR-6ULCustomBoard (DART-6UL carrier), the file is ''arch/arm/boot/dts/imx6ul-imx6ull-var-dart-6ulcustomboard.dtsi''.<br/>In case of the Concerto-Board (VAR-SOM-6UL carrier), the file is ''arch/arm/boot/dts/imx6ul-imx6ull-var-som-concerto-board.dtsi''.<br/>The above will result in using the ''&fec1'' node from the dtsi file of the SOM, as is (as the phy of the first Ethernet port is on the SOM), without adding the second port (which its phy is on the reference carrier board).<br/>Notes:<br/>- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build ''only'' the device trees and copy them to your SD card.
-Notes:<br>
-- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build ''only'' the device trees and copy them to your SD card.<br>
-- In older kernel releases where there is no imx6ul-imx6ull-var-dart-common.dtsi file, the relevant file to edit is called imx6ul-var-dart.dtsi
-<section end=DART-6UL_USING_ONE_ETH_PORT_OLD/>
-<section begin=DART-6UL_USING_ONE_ETH_PORT/>
-To remove the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:<br>
-Edit the dtsi file of the reference carrier board in the Linux kernel source and remove the ''&fec1'' and ''&fec2'' nodes from it.<br>
-In case of the VAR-6ULCustomBoard (DART-6UL carrier), the file is ''arch/arm/boot/dts/imx6ul-imx6ull-var-dart-6ulcustomboard.dtsi''.<br>
-In case of the Concerto-Board (VAR-SOM-6UL carrier), the file is ''arch/arm/boot/dts/imx6ul-imx6ull-var-som-concerto-board.dtsi''.<br>
-The above will result in using the ''&fec1'' node from the dtsi file of the SOM, as is (as the phy of the first Ethernet port is on the SOM), without adding the second port (which its phy is on the reference carrier board).
-<br>
-Notes:<br>
-- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build ''only'' the device trees and copy them to your SD card.<br>
-<section end=DART-6UL_USING_ONE_ETH_PORT/>
-= VAR-SOM-MX7=
+= VAR-SOM-MX7 =
 == Build Results ==
-<section begin=VAR-SOM-MX7_BUILD_RESULTS/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | How to use<br/>
+! scope="col" | How to use<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_128kbpeb.ubi
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_256kbpeb.ubi
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}_128kbpeb.ubi
-| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
+| style="padding: 5px" | A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}_256kbpeb.ubi
-| style="padding: 5px;"| Linux kernel image, same binary for SD card/eMMC or NAND flash.
+| style="padding: 5px" | A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
 |-
-| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| SPL built for SD card boot or eMMC boot.
+| style="padding: 5px" | Linux kernel image, same binary for SD card/eMMC or NAND flash.
 |-
-| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:SPL_SD_IMAGE_NAME}}
-| style="padding: 5px;"| SPL built for NAND flash.
+| style="padding: 5px" | SPL built for SD card boot or eMMC boot.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:SPL_NAND_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
+| style="padding: 5px" | SPL built for NAND flash.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for NAND flash.
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_NAND_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for NAND flash.
 |}
+<br/><br/>
 {| class="wikitable"
 |-
@@ Line 1,012: / Line 995: @@
 ! scope="col" | Description
 |-
-| style="padding: 5px;"| zImage-imx7d-var-som-emmc.dtb
+| style="padding: 5px" | zImage-imx7d-var-som-emmc.dtb
-| style="padding: 5px;"| Device tree blob for SOMs with eMMC.
+| style="padding: 5px" | Device tree blob for SOMs with eMMC.
-|-
-| style="padding: 5px;"| zImage-imx7d-var-som-nand.dtb
-| style="padding: 5px;"| Device tree blob for SOMs with NAND flash.
 |-
-| style="padding: 5px;"| zImage-imx7d-var-som-emmc-m4.dtb
+| style="padding: 5px" | zImage-imx7d-var-som-nand.dtb
-| style="padding: 5px;"| Device tree blob for SOMs with eMMC and M4 support.
+| style="padding: 5px" | Device tree blob for SOMs with NAND flash.
 |-
-| style="padding: 5px;"| zImage-imx7d-var-som-nand-m4.dtb
+| style="padding: 5px" | zImage-imx7d-var-som-emmc-m4.dtb
-| style="padding: 5px;"| Device tree blob for SOMs with NAND flash and M4 support.
+| style="padding: 5px" | Device tree blob for SOMs with eMMC and M4 support.
 |-
+| style="padding: 5px" | zImage-imx7d-var-som-nand-m4.dtb
+| style="padding: 5px" | Device tree blob for SOMs with NAND flash and M4 support.
 |}
-<section end=VAR-SOM-MX7_BUILD_RESULTS/>
 == Device tree ==
-<section begin=VAR-SOM-MX7_DTB/>
+<pre>Build only the device tree for VAR-SOM-MX7 with eMMC:
-<pre>
-Build only the device tree for VAR-SOM-MX7 with eMMC:
 $ make -j4 imx7d-var-som-emmc.dtb
@@ Line 1,043: / Line 1,023: @@
 $ make -j4 imx7d-var-som-nand-m4.dtb
 </pre>
-<section end=VAR-SOM-MX7_DTB/>
 == SD card image file tree ==
-<section begin=VAR-SOM-MX7_SD_TREE/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx7d-var-som-emmc.dtb
@@ Line 1,060: / Line 1,038: @@
      └── zImage
 </pre>
-<section end=VAR-SOM-MX7_SD_TREE/>
-<section begin=VAR-SOM-MX7_SD_TREE_SPL/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx7d-var-som-emmc.dtb
@@ Line 1,078: / Line 1,053: @@
      └── zImage
 </pre>
-<section end=VAR-SOM-MX7_SD_TREE_SPL/>
-<section begin=VAR-SOM-MX7_SD_TREE_SUMO_OR_SUMOPLUS/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx7d-var-som-emmc.dtb
@@ Line 1,097: / Line 1,069: @@
      └── zImage
 </pre>
-<section end=VAR-SOM-MX7_SD_TREE_SUMO_OR_SUMOPLUS/>
-== Flash Recovery SD from GUI ==
-<section begin=VAR-SOM-MX7_FLASH_SD_FROM_GUI/>
+== Flash Recovery SD from GUI ==
 === Flash from GUI ===
-[[File:VAR-SOM-MX7_Rocko_Recovery.png]]
-<br><br>
+[[File:VAR-SOM-MX7 Rocko Recovery.png]]<br/><br/>Touch/Click on the appropriate icon:
-Touch/Click on the appropriate icon:
-* Install Yocto NAND flash: Flash Yocto to NAND flash
+*Install Yocto NAND flash: Flash Yocto to NAND flash
-* Install Yocto eMMC: Flash Yocto to eMMC
+*Install Yocto eMMC: Flash Yocto to eMMC
-<section end=VAR-SOM-MX7_FLASH_SD_FROM_GUI/>
 == Setting the Boot Mode ==
-<section begin=VAR-SOM-MX7_BOOT_BOARD/>
 Make sure the BOOT SELECT DIP switches on the carrier board are set correctly before you power on the board.
-<pre>
+<pre>SW1-SW2
-SW1-SW2
+- 0&nbsp;: Boot from SD card
-- 0 : Boot from SD card
+- 0&nbsp;: Boot from eMMC
-- 0 : Boot from eMMC
+- 1&nbsp;: Boot from NAND flash
-- 1 : Boot from NAND flash
+- 1&nbsp;: Illegal
-- 1 : Illegal
 </pre>
 {{Note|The VAR-SOM-MX7 SOM comes with either NAND or eMMC, but not both.}}
-<section end=VAR-SOM-MX7_BOOT_BOARD/>
 = DART-MX8M =
 == Build Results ==
-<section begin=DART-MX8M_BUILD_RESULTS/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | How to use<br/>
+! scope="col" | How to use<br/><br/> <br/><br/>
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
+| style="padding: 5px" | Linux kernel image, same binary for SD card and eMMC.
-|-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
 |}
+<br/><br/>
 {| class="wikitable"
 |-
-! scope="col" | File Name<br/>
+! scope="col" | File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI display configuration.
 |-
-| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-hdmi-4k.dtb
+| style="padding: 5px" | Image.gz-imx8m-var-dart-emmc-wifi-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI 4K display configuration.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and HDMI display configuration.
 |-
-| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-dcss-lvds.dtb
+| style="padding: 5px" | Image.gz-imx8m-var-dart-emmc-wifi-hdmi-4k.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and DCSS LVDS display configuration.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and HDMI 4K display configuration.
 |-
-| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb
+| style="padding: 5px" | Image.gz-imx8m-var-dart-emmc-wifi-dcss-lvds.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and DCSS LVDS display configuration.
 |-
-| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-dual-display.dtb
+| style="padding: 5px" | Image.gz-imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration.
 |-
-| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-hdmi.dtb
+| style="padding: 5px" | Image.gz-imx8m-var-dart-emmc-wifi-dual-display.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI display configuration.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration.
 |-
-| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-hdmi-4k.dtb
+| style="padding: 5px" | Image.gz-imx8m-var-dart-sd-emmc-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI 4K display configuration.
+| style="padding: 5px" | Device tree blob for SD, eMMC and HDMI display configuration.
 |-
-| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-dcss-lvds.dtb
+| style="padding: 5px" | Image.gz-imx8m-var-dart-sd-emmc-hdmi-4k.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and DCSS LVDS display configuration.
+| style="padding: 5px" | Device tree blob for SD, eMMC and HDMI 4K display configuration.
 |-
-| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-lcdif-lvds.dtb
+| style="padding: 5px" | Image.gz-imx8m-var-dart-sd-emmc-dcss-lvds.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and LCDIF LVDS display configuration.
+| style="padding: 5px" | Device tree blob for SD, eMMC and DCSS LVDS display configuration.
 |-
-| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-dual-display.dtb
+| style="padding: 5px" | Image.gz-imx8m-var-dart-sd-emmc-lcdif-lvds.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration.
+| style="padding: 5px" | Device tree blob for SD, eMMC and LCDIF LVDS display configuration.
 |-
+| style="padding: 5px" | Image.gz-imx8m-var-dart-sd-emmc-dual-display.dtb
+| style="padding: 5px" | Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration.
 |}
-<section end=DART-MX8M_BUILD_RESULTS/>
+<br/><br/>
-<section begin=DART-MX8M_BUILD_RESULTS_SUMO_AND_UP/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | How to use<br/>
+! scope="col" | How to use<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
+| style="padding: 5px" | Linux kernel image, same binary for SD card and eMMC.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
 |}
+<br/><br/>
 {| class="wikitable"
 |-
-! scope="col" | File Name<br/>
+! scope="col" | File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi-cb12.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds-cb12.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display-cb12.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb
-| style="padding: 5px;"| DTB for SD, eMMC and HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for SD, eMMC and HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds.dtb
-| style="padding: 5px;"| DTB for SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb
-| style="padding: 5px;"| DTB for SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi-cb12.dtb
-| style="padding: 5px;"| DTB for SD, eMMC and HDMI display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for SD, eMMC and HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds-cb12.dtb
-| style="padding: 5px;"| DTB for SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.1 and 1.2.
-|-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display-cb12.dtb
-| style="padding: 5px;"| DTB for SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |-
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display-cb12.dtb
+| style="padding: 5px" | DTB for SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |}
-<section end=DART-MX8M_BUILD_RESULTS_SUMO_AND_UP/>
+<br/><br/>
-<section begin=DART-MX8M_BUILD_RESULTS_SUMO_4_14_98_AND_UP/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | How to use<br/>
+! scope="col" | How to use<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
+| style="padding: 5px" | Linux kernel image, same binary for SD card and eMMC.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
 |}
+<br/><br/>
 {| class="wikitable"
 |-
-! scope="col" | File Name<br/>
+! scope="col" | File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-dp.dtb
-| style="padding: 5px;"| DTB for eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-dp.dtb
-| style="padding: 5px;"| DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-lvds.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-hdmi.dtb
-| style="padding: 5px;"| DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-lvds-dp.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-lvds.dtb
-| style="padding: 5px;"| DTB for eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-lvds-dp.dtb
-| style="padding: 5px;"| DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-hdmi-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb
-| style="padding: 5px;"| DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-lvds-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-hdmi-cb12.dtb
-| style="padding: 5px;"| DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-lvds-cb12.dtb
-| style="padding: 5px;"| DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-wifi-dp.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi-cb12.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-wifi-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-wifi-dp.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-wifi-lvds.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-wifi-hdmi.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-wifi-lvds-dp.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-wifi-lvds.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-wifi-lvds-dp.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-wifi-hdmi-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-wifi-lvds-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-wifi-hdmi-cb12.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-wifi-lvds-cb12.dtb
-| style="padding: 5px;"| DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-sd-dp.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi-cb12.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-sd-dp.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for M4, eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for M4, eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi-cb12.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-cb12.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-wifi-dp.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi-cb12.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-wifi-dp.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for M4, eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
+| style="padding: 5px" | DTB for M4, eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi-cb12.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi-cb12.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-cb12.dtb
-| style="padding: 5px;"| DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
+| style="padding: 5px" | DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
 |-
+| style="padding: 5px" | Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi-cb12.dtb
+| style="padding: 5px" | DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
 |}
-<section end=DART-MX8M_BUILD_RESULTS_SUMO_4_14_98_AND_UP/>
+<br/><br/>
 == Device tree ==
-<section begin=DART-MX8M_DTB/>
+<pre>Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI display:
-<pre>
-Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI display:
 $ make -j4 imx8m-var-dart-emmc-wifi-hdmi.dtb
@@ Line 1,405: / Line 1,371: @@
 </pre>
-<section end=DART-MX8M_DTB/>
-<section begin=DART-MX8M_DTB_SUMO_PLUS/>
+<pre>Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI display:
-<pre>
-Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI display:
 $ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb
@@ Line 1,428: / Line 1,391: @@
 </pre>
-<section end=DART-MX8M_DTB_SUMO_PLUS/>
-<section begin=DART-MX8M_DTB_SUMO_4_14_98_PLUS/>
+<pre>Build only the device tree for DART-MX8M configuration with eMMC, SD and DP display:
-<pre>
-Build only the device tree for DART-MX8M configuration with eMMC, SD and DP display:
 $ make -j4 freescale/fsl-imx8mq-var-dart-sd-dp.dtb
@@ Line 1,492: / Line 1,452: @@
 $ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb
 </pre>
-<section end=DART-MX8M_DTB_SUMO_4_14_98_PLUS/>
 == SD card image file tree ==
-<section begin=DART-MX8M_SD_TREE/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx-boot-sd.bin
@@ Line 1,503: / Line 1,461: @@
 </pre>
-<section end=DART-MX8M_SD_TREE/>
 == SD card image file tree ==
-<section begin=DART-MX8M_SD_TREE_SUMO_4_14_98_PLUS/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx-boot-imx8mq-var-dart-sd.bin-flash_dp_evk
@@ Line 1,517: / Line 1,473: @@
 </pre>
-<section end=DART-MX8M_SD_TREE_SUMO_4_14_98_PLUS/>
-<section begin=DART-MX8M_FDT_TABLE_MORTY/>
 {| class="wikitable"
 |-
-! scope="col" | DTB File Name<br/>
+! scope="col" | DTB File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
 |-
-| style="padding: 5px;"| imx8m-var-dart-emmc-wifi-hdmi.dtb
+| style="padding: 5px" | imx8m-var-dart-emmc-wifi-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| imx8m-var-dart-emmc-wifi-hdmi-4k.dtb
+| style="padding: 5px" | imx8m-var-dart-emmc-wifi-hdmi-4k.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI 4K display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and HDMI 4K display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| imx8m-var-dart-emmc-wifi-dcss-lvds.dtb
+| style="padding: 5px" | imx8m-var-dart-emmc-wifi-dcss-lvds.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and DCSS LVDS display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and DCSS LVDS display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb
+| style="padding: 5px" | imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| imx8m-var-dart-emmc-wifi-dual-display.dtb
+| style="padding: 5px" | imx8m-var-dart-emmc-wifi-dual-display.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| imx8m-var-dart-sd-emmc-hdmi.dtb
+| style="padding: 5px" | imx8m-var-dart-sd-emmc-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| imx8m-var-dart-sd-emmc-hdmi-4k.dtb
+| style="padding: 5px" | imx8m-var-dart-sd-emmc-hdmi-4k.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI 4K display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for SD, eMMC and HDMI 4K display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| imx8m-var-dart-sd-emmc-dcss-lvds.dtb
+| style="padding: 5px" | imx8m-var-dart-sd-emmc-dcss-lvds.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and DCSS LVDS display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for SD, eMMC and DCSS LVDS display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| imx8m-var-dart-sd-emmc-lcdif-lvds.dtb
+| style="padding: 5px" | imx8m-var-dart-sd-emmc-lcdif-lvds.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and LCDIF LVDS display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for SD, eMMC and LCDIF LVDS display configuration. WIFI disabled.
-|-
-| style="padding: 5px;"| imx8m-var-dart-sd-emmc-dual-display.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.
 |-
+| style="padding: 5px" | imx8m-var-dart-sd-emmc-dual-display.dtb
+| style="padding: 5px" | Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.
 |}
-<section end=DART-MX8M_FDT_TABLE_MORTY/>
+<br/><br/>
-<section begin=DART-MX8M_FDT_TABLE_SUMO_PLUS/>
 {| class="wikitable"
 |-
-! scope="col" | DTB File Name<br/>
+! scope="col" | DTB File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-sd-emmc-lvds.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and LVDS display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-sd-emmc-lvds.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for SD, eMMC and LVDS display configuration. WIFI disabled.
 |-
+| style="padding: 5px" | fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb
+| style="padding: 5px" | Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.
 |}
-<section end=DART-MX8M_FDT_TABLE_SUMO_PLUS/>
+<br/><br/>
-<section begin=DART-MX8M_FDT_TABLE_SUMO_4_14_98_PLUS/>
 {| class="wikitable"
 |-
-! scope="col" | DTB File Name<br/>
+! scope="col" | DTB File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-sd-dp.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-sd-dp.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-sd-hdmi.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-sd-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, SD and HDMI display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for eMMC, SD and HDMI display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-sd-lvds.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-sd-lvds.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, SD and LVDS display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for eMMC, SD and LVDS display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-sd-lvds-dp.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-sd-lvds-dp.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-wifi-dp.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-wifi-dp.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and DP display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and DP display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-wifi-hdmi.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-wifi-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-wifi-lvds.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-wifi-lvds.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-wifi-lvds-dp.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-wifi-lvds-dp.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-m4-sd-dp.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-m4-sd-dp.dtb
-| style="padding: 5px;"| Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-m4-sd-hdmi.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-m4-sd-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for M4, eMMC, SD and HDMI display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for M4, eMMC, SD and HDMI display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-m4-sd-lvds.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-m4-sd-lvds.dtb
-| style="padding: 5px;"| Device tree blob for M4, eMMC, SD and LVDS display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for M4, eMMC, SD and LVDS display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb
-| style="padding: 5px;"| Device tree blob for M4, eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for M4, eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for M4, eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for M4, eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-m4-wifi-dp.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-m4-wifi-dp.dtb
-| style="padding: 5px;"| Device tree blob for M4, eMMC, WIFI and DP display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for M4, eMMC, WIFI and DP display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for M4, eMMC, WIFI and HDMI display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for M4, eMMC, WIFI and HDMI display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-m4-wifi-lvds.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-m4-wifi-lvds.dtb
-| style="padding: 5px;"| Device tree blob for M4, eMMC, WIFI and LVDS display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for M4, eMMC, WIFI and LVDS display configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb
+| style="padding: 5px" | fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb
-| style="padding: 5px;"| Device tree blob for M4, eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
+| style="padding: 5px" | Device tree blob for M4, eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
-|-
-| style="padding: 5px;"| fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for M4, eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
 |-
+| style="padding: 5px" | fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb
+| style="padding: 5px" | Device tree blob for M4, eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
 |}
-<section end=DART-MX8M_FDT_TABLE_SUMO_4_14_98_PLUS/>
+<br/><br/>
 == Setting the Boot Mode ==
-<section begin=DART-MX8M_BOOT_BOARD/>
 Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.
-<pre>
+<pre>SW7
-SW7
+&nbsp;: Boot from SD card
-: Boot from SD card
+&nbsp;: Boot from eMMC
-: Boot from eMMC
 </pre>
-<section end=DART-MX8M_BOOT_BOARD/>
 = DART-MX8M-MINI =
 == Build Results ==
-<section begin=DART-MX8M-MINI_BUILD_RESULTS/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | How to use<br/>
+! scope="col" | How to use<br/><br/> <br/><br/>
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
+| style="padding: 5px" | Linux kernel image, same binary for SD card and eMMC.
-|-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
 |}
+<br/><br/>
 {| class="wikitable"
 |-
-! scope="col" | File Name<br/>
+! scope="col" | File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-imx8mm-var-dart.dtb
-| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI
 |-
-| style="padding: 5px;"| fsl-imx8mm-var-som.dtb
+| style="padding: 5px" | fsl-imx8mm-var-dart.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI
+| style="padding: 5px" | Device tree blob for DART-MX8M-MINI
 |-
-| style="padding: 5px;"| fsl-imx8mm-var-som-rev10.dtb
+| style="padding: 5px" | fsl-imx8mm-var-som.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0
+| style="padding: 5px" | Device tree blob for VAR-SOM-MX8M-MINI
 |-
+| style="padding: 5px" | fsl-imx8mm-var-som-rev10.dtb
+| style="padding: 5px" | Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0
 |}
-<section end=DART-MX8M-MINI_BUILD_RESULTS/>
+<br/><br/>
 == Device tree ==
-<section begin=DART-MX8M-MINI_DTB/>
+<pre>Build only the device tree for DART-MX8M-MINI:
-<pre>
-Build only the device tree for DART-MX8M-MINI:
 $ make -j4 freescale/fsl-imx8mm-var-dart.dtb
 </pre>
-<section end=DART-MX8M-MINI_DTB/>
 == SD card image file tree ==
-<section begin=DART-MX8M-MINI_SD_TREE/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx-boot-sd.bin
@@ Line 1,721: / Line 1,670: @@
 </pre>
-<section end=DART-MX8M-MINI_SD_TREE/>
 == Setting the Boot Mode ==
-<section begin=DART-MX8M-MINI_BOOT_BOARD/>
 Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.
-<pre>
+<pre>SW7
-SW7
+&nbsp;: Boot from SD card
-: Boot from SD card
+&nbsp;: Boot from eMMC
-: Boot from eMMC
 </pre>
-<section end=DART-MX8M-MINI_BOOT_BOARD/>
 = VAR-SOM-MX8M-NANO =
 == Build Results ==
-<section begin=VAR-SOM-MX8M-NANO_BUILD_RESULTS/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | How to use<br/>
+! scope="col" | How to use<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
+| style="padding: 5px" | Linux kernel image, same binary for SD card and eMMC.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
 |}
+<br/><br/>
 {| class="wikitable"
 |-
-! scope="col" | File Name<br/>
+! scope="col" | File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| Image.gz-fsl-imx8mn-var-som.dtb
-| style="padding: 5px;"| Device tree blob for SD, eMMC, WIFI and LVDS display configuration.
 |-
+| style="padding: 5px" | Image.gz-fsl-imx8mn-var-som.dtb
+| style="padding: 5px" | Device tree blob for SD, eMMC, WIFI and LVDS display configuration.
 |}
-<section end=VAR-SOM-MX8M-NANO_BUILD_RESULTS/>
+<br/><br/>
 == Device tree ==
-<section begin=VAR-SOM-MX8M-NANO_DTB/>
+<pre>Build only the device tree for VAR-SOM-MX8M-NANO:
-<pre>
-Build only the device tree for VAR-SOM-MX8M-NANO:
 $ make -j4 freescale/fsl-imx8mn-var-som.dtb
 </pre>
-<section end=VAR-SOM-MX8M-NANO_DTB/>
 == SD card image file tree ==
-<section begin=VAR-SOM-MX8M-NANO_SD_TREE/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx-boot-sd.bin
@@ Line 1,783: / Line 1,727: @@
 </pre>
-<section end=VAR-SOM-MX8M-NANO_SD_TREE/>
 == Setting the Boot Mode ==
-<section begin=VAR-SOM-MX8M-NANO_BOOT_BOARD/>
 Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.
-<pre>
+<pre>SW3
-SW3
+&nbsp;: Boot from SD card
-: Boot from SD card
+&nbsp;: Boot from eMMC
-: Boot from eMMC
 </pre>
-<section end=VAR-SOM-MX8M-NANO_BOOT_BOARD/>
 = VAR-SOM-MX8X =
 == Build Results ==
-<section begin=VAR-SOM-MX8X_BUILD_RESULTS/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | How to use<br/>
+! scope="col" | How to use<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
+| style="padding: 5px" | Linux kernel image, same binary for SD card and eMMC.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
 |}
+<br/><br/>
 {| class="wikitable"
 |-
-! scope="col" | File Name<br/>
+! scope="col" | File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| Image.gz-fsl-imx8qxp-var-som-wifi.dtb
-| style="padding: 5px;"| DTB for WIFI configuration. SD card disabled.
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8qxp-var-som-sd.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8qxp-var-som-wifi.dtb
-| style="padding: 5px;"| DTB for SD card configuration. WIFI disabled.
+| style="padding: 5px" | DTB for WIFI configuration. SD card disabled.
 |-
+| style="padding: 5px" | Image.gz-fsl-imx8qxp-var-som-sd.dtb
+| style="padding: 5px" | DTB for SD card configuration. WIFI disabled.
 |}
-<section end=VAR-SOM-MX8X_BUILD_RESULTS/>
+<br/><br/>
 == Device tree ==
-<section begin=VAR-SOM-MX8X_DTB/>
+<pre>Build only the device tree for VAR-SOM-MX8X WIFI configuration:
-<pre>
-Build only the device tree for VAR-SOM-MX8X WIFI configuration:
 $ make -j4 freescale/fsl-imx8qxp-var-som-wifi.dtb
@@ Line 1,840: / Line 1,781: @@
 $ make -j4 freescale/fsl-imx8qxp-var-som-sd.dtb
 </pre>
-<section end=VAR-SOM-MX8X_DTB/>
 == SD card image file tree ==
-<section begin=VAR-SOM-MX8X_SD_TREE/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx-boot-sd.bin
@@ Line 1,851: / Line 1,790: @@
 </pre>
-<section end=VAR-SOM-MX8X_SD_TREE/>
-<section begin=VAR-SOM-MX8X_FDT_TABLE/>
 {| class="wikitable"
 |-
-! scope="col" | DTB File Name<br/>
+! scope="col" | DTB File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-imx8qxp-var-som-wifi.dtb
-| style="padding: 5px;"| Device tree blob for WIFI configuration. SD card disabled.
 |-
-| style="padding: 5px;"| fsl-imx8qxp-var-som-sd.dtb
+| style="padding: 5px" | fsl-imx8qxp-var-som-wifi.dtb
-| style="padding: 5px;"| Device tree blob for SD configuration. WIFI disabled.
+| style="padding: 5px" | Device tree blob for WIFI configuration. SD card disabled.
 |-
+| style="padding: 5px" | fsl-imx8qxp-var-som-sd.dtb
+| style="padding: 5px" | Device tree blob for SD configuration. WIFI disabled.
 |}
-<section end=VAR-SOM-MX8X_FDT_TABLE/>
+<br/><br/>
 == Setting the Boot Mode ==
-<section begin=VAR-SOM-MX8X_BOOT_BOARD/>
 Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.
-<pre>
+<pre>SW3
-SW3
+&nbsp;: Boot from SD card
-: Boot from SD card
+&nbsp;: Boot from eMMC (Internal)
-: Boot from eMMC (Internal)
 </pre>
-<section end=VAR-SOM-MX8X_BOOT_BOARD/>
 = VAR-SOM-MX8 =
 == Build Results ==
-<section begin=VAR-SOM-MX8_BUILD_RESULTS/>
 {| class="wikitable"
 |-
-! scope="col" | Image Name<br/>
+! scope="col" | Image Name<br/> <br/>
-! scope="col" | How to use<br/>
+! scope="col" | How to use<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
-| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
+| style="padding: 5px" | This image is for SD card boot.<br/>It can be flashed as-is on an SD card that can then be used to boot your system,<br/>according to the relevant startup-guide of your product<br/>(usually requires to press the boot select button, or toggle a DIP switch).<br/>For detailed information refer to the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
+| style="padding: 5px" | fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
-| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
+| style="padding: 5px" | Tarball with rootfs files.<br/>Can be used to create an NFS root file system on the host.<br/>See the {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br/>Also used to create our extended SD card.<br/>See the [[Yocto Build Release#Create a bootable SD card|Create a bootable SD card]] section below.
 |-
-| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | {{#var:KERNEL_IMAGE}}
-| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
+| style="padding: 5px" | Linux kernel image, same binary for SD card and eMMC.
 |-
+| style="padding: 5px" | {{#var:U-BOOT_SD_IMAGE_NAME}}
+| style="padding: 5px" | U-Boot built for SD card boot or eMMC boot.
 |}
+<br/><br/>
 {| class="wikitable"
 |-
-! scope="col" | File Name<br/>
+! scope="col" | File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
-|-
-| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-som-dp.dtb
-| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with DP display
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-som-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8qm-var-som-dp.dtb
-| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with HDMI display
+| style="padding: 5px" | DTB file for VAR-SOM-MX8 with DP display
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-som-lvds.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8qm-var-som-hdmi.dtb
-| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with LVDS display
+| style="padding: 5px" | DTB file for VAR-SOM-MX8 with HDMI display
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-spear-dp.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8qm-var-som-lvds.dtb
-| style="padding: 5px;"| DTB file for SPEAR-MX8 with DP display
+| style="padding: 5px" | DTB file for VAR-SOM-MX8 with LVDS display
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-spear-hdmi.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8qm-var-spear-dp.dtb
-| style="padding: 5px;"| DTB file for SPEAR-MX8 with HDMI display
+| style="padding: 5px" | DTB file for SPEAR-MX8 with DP display
 |-
-| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-spear-lvds.dtb
+| style="padding: 5px" | Image.gz-fsl-imx8qm-var-spear-hdmi.dtb
-| style="padding: 5px;"| DTB file for SPEAR-MX8 with LVDS display
+| style="padding: 5px" | DTB file for SPEAR-MX8 with HDMI display
 |-
+| style="padding: 5px" | Image.gz-fsl-imx8qm-var-spear-lvds.dtb
+| style="padding: 5px" | DTB file for SPEAR-MX8 with LVDS display
 |}
-<section end=VAR-SOM-MX8_BUILD_RESULTS/>
+<br/><br/>
 == Device tree ==
-<section begin=VAR-SOM-MX8_DTB/>
+<pre>Build device tree for VAR-SOM-MX8 with DP display:
-<pre>
-Build device tree for VAR-SOM-MX8 with DP display:
 $ make -j4 freescale/fsl-imx8qm-var-som-db.dtb
@@ Line 1,947: / Line 1,882: @@
 $ make -j4 freescale/fsl-imx8qm-var-spear-lvds.dtb
 </pre>
-<section end=VAR-SOM-MX8_DTB/>
 == SD card image file tree ==
-<section begin=VAR-SOM-MX8_SD_TREE/>
+<pre>/opt/images/
-<pre>
-/opt/images/
 └── Yocto
      ├── imx-boot-sd.bin
@@ Line 1,958: / Line 1,891: @@
 </pre>
-<section end=VAR-SOM-MX8_SD_TREE/>
-<section begin=VAR-SOM-MX8_FDT_TABLE/>
 {| class="wikitable"
 |-
-! scope="col" | DTB File Name<br/>
+! scope="col" | DTB File Name<br/> <br/>
-! scope="col" | Description<br/>
+! scope="col" | Description<br/><br/> <br/><br/>
 |-
-| style="padding: 5px;"| fsl-imx8qm-var-som-dp.dtb
+| style="padding: 5px" | fsl-imx8qm-var-som-dp.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8 with DP display
+| style="padding: 5px" | Device tree blob for VAR-SOM-MX8 with DP display
 |-
-| style="padding: 5px;"| fsl-imx8qm-var-som-hdmi.dtb
+| style="padding: 5px" | fsl-imx8qm-var-som-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8 with HDMI display
+| style="padding: 5px" | Device tree blob for VAR-SOM-MX8 with HDMI display
 |-
-| style="padding: 5px;"| fsl-imx8qm-var-som-lvds.dtb
+| style="padding: 5px" | fsl-imx8qm-var-som-lvds.dtb
-| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8 with LVDS display
+| style="padding: 5px" | Device tree blob for VAR-SOM-MX8 with LVDS display
 |-
-| style="padding: 5px;"| fsl-imx8qm-var-spear-dp.dtb
+| style="padding: 5px" | fsl-imx8qm-var-spear-dp.dtb
-| style="padding: 5px;"| Device tree blob for SPEAR-MX8 with DP display
+| style="padding: 5px" | Device tree blob for SPEAR-MX8 with DP display
 |-
-| style="padding: 5px;"| fsl-imx8qm-var-spear-hdmi.dtb
+| style="padding: 5px" | fsl-imx8qm-var-spear-hdmi.dtb
-| style="padding: 5px;"| Device tree blob for SPEAR-MX8 with HDMI display
+| style="padding: 5px" | Device tree blob for SPEAR-MX8 with HDMI display
-|-
-| style="padding: 5px;"| fsl-imx8qm-var-spear-lvds.dtb
-| style="padding: 5px;"| Device tree blob for SPEAR-MX8 with LVDS display
 |-
+| style="padding: 5px" | fsl-imx8qm-var-spear-lvds.dtb
+| style="padding: 5px" | Device tree blob for SPEAR-MX8 with LVDS display
 |}
-<section end=VAR-SOM-MX8_FDT_TABLE/>
+<br/><br/>
 == Setting the Boot Mode ==
-<section begin=VAR-SOM-MX8_BOOT_BOARD/>
 Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.
-<pre>
+<pre>SW3 on VAR-SOM-MX8, SW6 on SPEAR-MX8
-SW3 on VAR-SOM-MX8, SW6 on SPEAR-MX8
+&nbsp;: Boot from SD card
-: Boot from SD card
+&nbsp;: Boot from eMMC (Internal)
-: Boot from eMMC (Internal)
 </pre>
-<section end=VAR-SOM-MX8_BOOT_BOARD/>
-=Platform Customizations=
+= Platform Customizations =
 == VAR-SOM-MX6 ==
 === thud-fslc-4.14.78-mx6-v1.0 ===
-<section begin=RELEASE_THUD_V1.0_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|thud-fslc-4.14.78-mx6-v1.0}}  <!--
+-->{{#vardefine:RELEASE_NAME|thud-fslc-4.14.78-mx6-v1.0}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_THUD_V1.0_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_THUD_V1.0_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vRLGv5hcoA2R9ITwZJMFexLVh29V9A79Euq_0hO7fJNexczP92C0A0tgUZLUva4enuPVVZ4EtCV5xoy/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vRLGv5hcoA2R9ITwZJMFexLVh29V9A79Euq_0hO7fJNexczP92C0A0tgUZLUva4enuPVVZ4EtCV5xoy/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Thud}}  <!--
+-->{{#vardefine:YOCTO_NAME|Thud}} <!--
--->{{#vardefine:YOCTO_VERSION|2.6.2}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.6.2}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.6}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.6}} <!--
--->{{#vardefine:FSL_BSP_VERSION|4.14.78_1.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|4.14.78_1.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREAMER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.6.2.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.6.2.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.6.2.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.6.2.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.6.2}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.6.2}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,067: / Line 1,998: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|thud}} <section end=RELEASE_THUD_V1.0_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|thud}}
 === sumo-fslc-4.9.88-mx6-v1.2 ===
-<section begin=RELEASE_SUMO_V1.2_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx6-v1.2}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx6-v1.2}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.2_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.2_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSKd7IE5JQ_DWCDgnEmH-Mg_8A2k1YJmia0u8jvyytR14lMYCQ-rIkZprdoxQhry_cy73ZbWYPIpqHu/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSKd7IE5JQ_DWCDgnEmH-Mg_8A2k1YJmia0u8jvyytR14lMYCQ-rIkZprdoxQhry_cy73ZbWYPIpqHu/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.5}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.5}} <!--
--->{{#vardefine:FSL_BSP_VERSION|4.9.88_2.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|4.9.88_2.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREAMER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.5.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.5.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.5}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.5}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,135: / Line 2,066: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|sumo}} <section end=RELEASE_SUMO_V1.2_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|sumo}}
 === sumo-fslc-4.9.88-mx6-v1.1 ===
-<section begin=RELEASE_SUMO_V1.1_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx6-v1.1}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx6-v1.1}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQPSx3AajKGeDmhNUx9Uw5qEe13_Dk2L35JjYC-bQiB5sD-P30ydA3lgq5e-UtmYN4_3ePo2GkM01Kn/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQPSx3AajKGeDmhNUx9Uw5qEe13_Dk2L35JjYC-bQiB5sD-P30ydA3lgq5e-UtmYN4_3ePo2GkM01Kn/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.5}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.5}} <!--
--->{{#vardefine:FSL_BSP_VERSION|4.9.88_2.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|4.9.88_2.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREAMER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.5.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.5.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.5}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.5}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
 -->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
 -->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
 -->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
@@ Line 2,203: / Line 2,134: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|sumo}} <section end=RELEASE_SUMO_V1.1_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|sumo}}
 === sumo-fslc-4.9.88-mx6-v1.0 ===
-<section begin=RELEASE_SUMO_V1.0_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx6-v1.0}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx6-v1.0}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.0_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.0_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSCKgCpBv3y1DnU2FFqQR6CUex8nPMLTdrrYyix9lLbz-o0pL6qoUIqSvMPc3eo0zlbAoGIKeo1WZjr/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSCKgCpBv3y1DnU2FFqQR6CUex8nPMLTdrrYyix9lLbz-o0pL6qoUIqSvMPc3eo0zlbAoGIKeo1WZjr/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.5}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.5}} <!--
--->{{#vardefine:FSL_BSP_VERSION|4.9.88_2.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|4.9.88_2.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREAMER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.5.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.5.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.5}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.5}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,271: / Line 2,202: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|sumo}} <section end=RELEASE_SUMO_V1.0_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|sumo}}
 === rocko-fslc-4.9.11-mx6-v1.2 ===
-<section begin=RELEASE_ROCKO_V1.2_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.2}}  <!--
+-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.2}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.2_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.2_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vR0eD_uZ7yKL1AlXX2JxuneUBoCN_ZZ5gc9-ty5IcRCF8nv2Lr9QLdZcQEXY3BJapcwtRvlp7ktdTb3/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vR0eD_uZ7yKL1AlXX2JxuneUBoCN_ZZ5gc9-ty5IcRCF8nv2Lr9QLdZcQEXY3BJapcwtRvlp7ktdTb3/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
+-->{{#vardefine:YOCTO_NAME|Rocko}} <!--
--->{{#vardefine:YOCTO_VERSION|2.4.3}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.4.3}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.4}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.4}} <!--
--->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREAMER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.3.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.3.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.3.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.3.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.3}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.3}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,339: / Line 2,270: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.2_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|rocko}}
 === rocko-fslc-4.9.11-mx6-v1.1 ===
-<section begin=RELEASE_ROCKO_V1.1_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.1}}  <!--
+-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.1}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.1_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.1_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQZT4UfUc2les0vV8lRebjNtOwKySN6AG-kw-JGc7Nw1EME0_sDjZJoiGzaUPd_gXvwkYc5B32ouILp/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQZT4UfUc2les0vV8lRebjNtOwKySN6AG-kw-JGc7Nw1EME0_sDjZJoiGzaUPd_gXvwkYc5B32ouILp/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
+-->{{#vardefine:YOCTO_NAME|Rocko}} <!--
--->{{#vardefine:YOCTO_VERSION|2.4.1}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.4.1}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.4}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.4}} <!--
--->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREAMER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.1}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.1}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,407: / Line 2,338: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.1_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|rocko}}
 === rocko-fslc-4.9.11-mx6-v1.0 ===
-<section begin=RELEASE_ROCKO_V1.0_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.0}}  <!--
+-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.0}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.1_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.1_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vTaKepnaAwm1umGw59L0ukHEa6VIIlEM9btCiWaXW0jx3nOQmwJ3h2QxyBbH2nMEwmDC_GvFbowtonR/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vTaKepnaAwm1umGw59L0ukHEa6VIIlEM9btCiWaXW0jx3nOQmwJ3h2QxyBbH2nMEwmDC_GvFbowtonR/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
+-->{{#vardefine:YOCTO_NAME|Rocko}} <!--
--->{{#vardefine:YOCTO_VERSION|2.4.1}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.4.1}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.4}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.4}} <!--
--->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREAMER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.1}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.1}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,475: / Line 2,406: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.0_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|rocko}}
 === rocko-fslc-4.9.11-mx6-v1.0-beta ===
-<section begin=RELEASE_ROCKO_V1.0_BETA_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.0-beta}}  <!--
+-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.0-beta}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.0_BETA_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.0_BETA_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQh6c1wcWTFZqE5coUlIQHX8PTo8E_aAuibOOcpD84DbVxF8ldWTdLx6beMC5xMSrdpOym-MNEe-YWt/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQh6c1wcWTFZqE5coUlIQHX8PTo8E_aAuibOOcpD84DbVxF8ldWTdLx6beMC5xMSrdpOym-MNEe-YWt/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
+-->{{#vardefine:YOCTO_NAME|Rocko}} <!--
--->{{#vardefine:YOCTO_VERSION|2.4}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.4}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.4}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.4}} <!--
--->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREAMER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,543: / Line 2,474: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.0_BETA_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|rocko}}
 === pyro-fslc-4.1.15-mx6-v1.0 ===
-<section begin=RELEASE_PYRO_V1.0_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6-v1.0}}  <!--
+-->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6-v1.0}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.0_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.0_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSpLBEmJDrgI_lRl_HSyZ-CRBH4eu3wbL9WO83wBIGvmDntL8_FNPQAhck1wcJMUrhygxDPHVxqjNiB/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSpLBEmJDrgI_lRl_HSyZ-CRBH4eu3wbL9WO83wBIGvmDntL8_FNPQAhck1wcJMUrhygxDPHVxqjNiB/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Pyro}}  <!--
+-->{{#vardefine:YOCTO_NAME|Pyro}} <!--
--->{{#vardefine:YOCTO_VERSION|2.3.1}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.3.1}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.3}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.3}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREMAER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREMAER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.3.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.3.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.3.1}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.3.1}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,611: / Line 2,542: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.0_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|pyro}}
 === pyro-fslc-4.1.15-mx6-v1.0-beta ===
-<section begin=RELEASE_PYRO_V1.0_BETA_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6-v1.0-beta}}  <!--
+-->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6-v1.0-beta}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.0_BETA_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.0_BETA_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1czYgOE6lEw9AmJukRSTcVGrW0DBpqNmH6rsFrO1fsMg/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1czYgOE6lEw9AmJukRSTcVGrW0DBpqNmH6rsFrO1fsMg/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Pyro}}  <!--
+-->{{#vardefine:YOCTO_NAME|Pyro}} <!--
--->{{#vardefine:YOCTO_VERSION|2.3.1}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.3.1}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.3}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.3}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREMAER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREMAER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.3.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.3.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.3.1}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.3.1}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,679: / Line 2,610: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.0_BETA_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|pyro}}
 === morty-fslc-4.1.15-mx6-v1.0 ===
-<section begin=RELEASE_MORTY_V1.0_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6-v1.0}}  <!--
+-->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6-v1.0}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.0_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.0_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1nMcgrux22pqd_6ewJDs1zO_57DoTLP2cdm1DKKTGCBQ/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1nMcgrux22pqd_6ewJDs1zO_57DoTLP2cdm1DKKTGCBQ/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Morty}}  <!--
+-->{{#vardefine:YOCTO_NAME|Morty}} <!--
--->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.2.1}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.2}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.2}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREMAER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREMAER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,747: / Line 2,678: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.0_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|morty}}
 === morty-fslc-4.1.15-mx6-v1.1 ===
-<section begin=RELEASE_MORTY_V1.1_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6-v1.1}}  <!--
+-->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6-v1.1}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.1_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.1_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1VYYGP6KQ991re4eJa8TT00vZbebBEuU-WEbnuB4hbXc/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1VYYGP6KQ991re4eJa8TT00vZbebBEuU-WEbnuB4hbXc/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Morty}}  <!--
+-->{{#vardefine:YOCTO_NAME|Morty}} <!--
--->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.2.1}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.2}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.2}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREMAER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREMAER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,815: / Line 2,746: @@
 -->{{#vardefine:SOC|mx6}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.1_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|morty}}
 === morty-fslc-4.1.15-mx6-v1.0-beta ===
-<section begin=RELEASE_MORTY_BETA_VAR-SOM-MX6/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6-v1.0-beta}}  <!--
+-->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6-v1.0-beta}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_BETA_VAR-SOM-MX6}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_BETA_VAR-SOM-MX6}} <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1WN-kGn3r9mcJh0EdSE3wZNBmhw5g5A95facy6gSIFn4/pubhtml}}  <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1WN-kGn3r9mcJh0EdSE3wZNBmhw5g5A95facy6gSIFn4/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Morty}}  <!--
+-->{{#vardefine:YOCTO_NAME|Morty}} <!--
--->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.2.1}} <!--
--->{{#vardefine:FSLC_BSP_VERSION|2.2}}  <!--
+-->{{#vardefine:FSLC_BSP_VERSION|2.2}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}} <!--
--->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREMAER
+-->{{#vardefine:GSTREAMER_SUPPORT|yes}} <!-- This parameter enables support for GSTREMAER
--->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
--->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
+-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
 -->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
@@ Line 2,879: / Line 2,810: @@
 -->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--
 -->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
--->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_BETA_VAR-SOM-MX6/>
+-->{{#vardefine:YOCTO_BRANCH|morty}}
 == DART-6UL ==
 === morty-fslc-4.1.15-mx6ul-v1.0-beta ===
-<section begin=RELEASE_MORTY_BETA_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6ul-v1.0-beta}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_BETA_DART-6UL}}  <!--
@@ Line 2,943: / Line 2,876: @@
 -->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
 -->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
--->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_BETA_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|morty}}
 === morty-fslc-4.1.15-mx6ul-v1.0 ===
-<section begin=RELEASE_MORTY_V1.0_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6ul-v1.0}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.0_DART-6UL}}  <!--
@@ Line 3,010: / Line 2,944: @@
 -->{{#vardefine:SOC|mx6ul}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.0_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|morty}}
 === pyro-fslc-4.1.15-mx6ul-v1.0 ===
-<section begin=RELEASE_PYRO_V1.0_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6ul-v1.0}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.0_DART-6UL}}  <!--
@@ Line 3,077: / Line 3,012: @@
 -->{{#vardefine:SOC|mx6ul}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.0_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|pyro}}
 === pyro-fslc-4.1.15-mx6ul-v1.1 ===
-<section begin=RELEASE_PYRO_V1.1_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6ul-v1.1}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.1_DART-6UL}}  <!--
@@ Line 3,144: / Line 3,080: @@
 -->{{#vardefine:SOC|mx6ul}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.1_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|pyro}}
 === pyro-fslc-4.1.15-mx6ul-v1.2 ===
-<section begin=RELEASE_PYRO_V1.2_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6ul-v1.2}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.2_DART-6UL}}  <!--
@@ Line 3,211: / Line 3,148: @@
 -->{{#vardefine:SOC|mx6ul}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.2_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|pyro}}
 === rocko-fslc-4.9.11-mx6ul-v1.0-beta ===
-<section begin=RELEASE_ROCKO_V1.0_BETA_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6ul-v1.0-beta}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.0_BETA_DART-6UL}}  <!--
@@ Line 3,278: / Line 3,216: @@
 -->{{#vardefine:SOC|mx6ul}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.0_BETA_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|rocko}}
 === rocko-fslc-4.9.11-mx6ul-v1.0 ===
-<section begin=RELEASE_ROCKO_V1.0_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6ul-v1.0}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.0_DART-6UL}}  <!--
@@ Line 3,345: / Line 3,284: @@
 -->{{#vardefine:SOC|mx6ul}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.0_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|rocko}}
 === rocko-fslc-4.9.11-mx6ul-v1.1 ===
-<section begin=RELEASE_ROCKO_V1.1_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6ul-v1.1}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.1_DART-6UL}}  <!--
@@ Line 3,412: / Line 3,352: @@
 -->{{#vardefine:SOC|mx6ul}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.1_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|rocko}}
 === sumo-fslc-4.9.88-mx6ul-v1.0 ===
-<section begin=RELEASE_SUMO_V1.0_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx6ul-v1.0}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.0_DART-6UL}}  <!--
@@ Line 3,479: / Line 3,420: @@
 -->{{#vardefine:SOC|mx6ul}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|sumo}} <section end=RELEASE_SUMO_V1.0_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|sumo}}
+=== sumo-fslc-4.9.88-mx6ul-v1.1 ===
-=== sumo-fslc-4.9.88-mx6ul-v1.1===
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
-<section begin=RELEASE_SUMO_V1.1_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx6ul-v1.1}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_DART-6UL}}  <!--
@@ Line 3,546: / Line 3,488: @@
 -->{{#vardefine:SOC|mx6ul}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|sumo}} <section end=RELEASE_SUMO_V1.1_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|sumo}}
-=== thud-fslc-4.14.78-mx6ul-v1.0===
+=== thud-fslc-4.14.78-mx6ul-v1.0 ===
-<section begin=RELEASE_THUD_V1.0_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|thud-fslc-4.14.78-mx6ul-v1.0}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_THUD_V1.0_DART-6UL}}  <!--
@@ Line 3,613: / Line 3,556: @@
 -->{{#vardefine:SOC|mx6ul}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|thud}} <section end=RELEASE_THUD_V1.0_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|thud}}
+=== thud-fslc-4.14.78-mx6ul-v1.1 ===
-=== thud-fslc-4.14.78-mx6ul-v1.1===
+ {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
-<section begin=RELEASE_THUD_V1.1_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
 -->{{#vardefine:RELEASE_NAME|thud-fslc-4.14.78-mx6ul-v1.1}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_THUD_V1.1_DART-6UL}}  <!--
@@ Line 3,680: / Line 3,624: @@
 -->{{#vardefine:SOC|mx6ul}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
--->{{#vardefine:YOCTO_BRANCH|thud}} <section end=RELEASE_THUD_V1.1_DART-6UL/>
+-->{{#vardefine:YOCTO_BRANCH|thud}}
 == VAR-SOM-MX7 ==
 === morty-fslc-4.1.15-mx7-v1.0 ===
-<section begin=RELEASE_MORTY_V1.0_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
+ {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
 -->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx7-v1.0}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.0_VAR-SOM-MX7}}  <!--
@@ Line 3,747: / Line 3,693: @@
 -->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
 -->{{#vardefine:SOC|mx7}} <!--
--->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.0_VAR-SOM-MX7/>
+-->{{#vardefine:YOCTO_BRANCH|morty}}
 === morty-fslc-4.1.15-mx7-v1.1 ===
-<section begin=RELEASE_MORTY_V1.1_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
+ {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
 -->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx7-v1.1}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.1_VAR-SOM-MX7}}  <!--
@@ Line 3,814: / Line 3,761: @@
 -->{{#vardefine:SOC|mx7}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
--->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.1_VAR-SOM-MX7/>
+-->{{#vardefine:YOCTO_BRANCH|morty}}
 === morty-fslc-4.1.15-mx7-v1.2 ===
-<section begin=RELEASE_MORTY_V1.2_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
+ {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
 -->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx7-v1.2}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.2_VAR-SOM-MX7}}  <!--
@@ Line 3,880: / Line 3,828: @@
 -->{{#vardefine:SOC|mx7}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
--->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.2_VAR-SOM-MX7/>
+-->{{#vardefine:YOCTO_BRANCH|morty}}
 === pyro-fslc-4.1.15-mx7-v1.0 ===
-<section begin=RELEASE_PYRO_V1.0_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
+ {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
 -->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx7-v1.0}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.0_VAR-SOM-MX7}}  <!--
@@ Line 3,946: / Line 3,895: @@
 -->{{#vardefine:SOC|mx7}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
--->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.0_VAR-SOM-MX7/>
+-->{{#vardefine:YOCTO_BRANCH|pyro}}
 === rocko-fslc-4.9.11-mx7-v1.0 ===
-<section begin=RELEASE_ROCKO_V1.0_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
+ {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
 -->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx7-v1.0}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.0_VAR-SOM-MX7}}  <!--
@@ Line 4,013: / Line 3,963: @@
 -->{{#vardefine:SOC|mx7}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
--->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.0_VAR-SOM-MX7/>
+-->{{#vardefine:YOCTO_BRANCH|rocko}}
 === rocko-fslc-4.9.11-mx7-v1.1 ===
-<section begin=RELEASE_ROCKO_V1.1_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
+ {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
 -->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx7-v1.1}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.1_VAR-SOM-MX7}}  <!--
@@ Line 4,080: / Line 4,031: @@
 -->{{#vardefine:SOC|mx7}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
--->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.1_VAR-SOM-MX7/>
+-->{{#vardefine:YOCTO_BRANCH|rocko}}
 === rocko-fslc-4.9.11-mx7-v1.2 ===
-<section begin=RELEASE_ROCKO_V1.2_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
+ {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
 -->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx7-v1.2}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.2_VAR-SOM-MX7}}  <!--
@@ Line 4,148: / Line 4,100: @@
 -->{{#vardefine:SOC|mx7}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
--->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.2_VAR-SOM-MX7/>
+-->{{#vardefine:YOCTO_BRANCH|rocko}}
 === sumo-fslc-4.9.88-mx7-v1.0 ===
-<section begin=RELEASE_SUMO_V1.0_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
+ {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
 -->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx7-v1.0}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.0_VAR-SOM-MX7}}  <!--
@@ Line 4,215: / Line 4,168: @@
 -->{{#vardefine:SOC|mx7}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
--->{{#vardefine:YOCTO_BRANCH|sumo}} <section end=RELEASE_SUMO_V1.0_VAR-SOM-MX7/>
+-->{{#vardefine:YOCTO_BRANCH|sumo}}
 === sumo-fslc-4.9.88-mx7-v1.1 ===
-<section begin=RELEASE_SUMO_V1.1_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
+ {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
 -->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx7-v1.1}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_VAR-SOM-MX7}}  <!--
@@ Line 4,282: / Line 4,236: @@
 -->{{#vardefine:SOC|mx7}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
--->{{#vardefine:YOCTO_BRANCH|sumo}} <section end=RELEASE_SUMO_V1.1_VAR-SOM-MX7/>
+-->{{#vardefine:YOCTO_BRANCH|sumo}}
 === thud-fslc-4.14.78-mx7-v1.0 ===
-<section begin=RELEASE_THUD_V1.0_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
+ {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
 -->{{#vardefine:RELEASE_NAME|thud-fslc-4.14.78-mx7-v1.0}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_THUD_V1.0_VAR-SOM-MX7}}  <!--
@@ Line 4,349: / Line 4,304: @@
 -->{{#vardefine:SOC|mx7}} <!--
 -->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
--->{{#vardefine:YOCTO_BRANCH|thud}} <section end=RELEASE_THUD_V1.0_VAR-SOM-MX7/>
+-->{{#vardefine:YOCTO_BRANCH|thud}}
 == DART-MX8M ==
 === morty-fsl-4.9.51-mx8m-v1.3 ===
-<section begin=RELEASE_MORTY_V1.3_DART-MX8M/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8m-var-dart}} <!--
@@ Line 4,360: / Line 4,316: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v13}}  <!--
+-->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v13}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.3_DART-MX8M}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.3_DART-MX8M}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vQyW2W3XQE4WG7NAHdw8lPXKfFAsVjqb-oNslF0QXFlc2C_4QGzVVMitvy9jlNgRXPnmZeogpM5swZQ/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Morty}}  <!--
+-->{{#vardefine:YOCTO_NAME|Morty}} <!--
--->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.2.1}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 4,374: / Line 4,330: @@
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.9.51_mx8mq-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.9.51_mx8mq-ga}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-aarch64-toolchain-4.9.51-mx8-ga.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-aarch64-toolchain-4.9.51-mx8-ga.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.51-mx8-ga.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.51-mx8-ga.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.9.51-mx8-ga}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.9.51-mx8-ga}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 4,425: / Line 4,381: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|imx8m-var-dart-emmc-wifi-dcss-lvds.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|imx8m-var-dart-sd-emmc-dcss-lvds.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|imx8m-var-dart.dtb}} <section end=RELEASE_MORTY_V1.3_DART-MX8M/>
+-->{{#vardefine:DEFAULT_DTB|imx8m-var-dart.dtb}}
 === morty-fsl-4.9.51-mx8m-v1.4 ===
-<section begin=RELEASE_MORTY_V1.4_DART-MX8M/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8m-var-dart}} <!--
@@ Line 4,435: / Line 4,391: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v14}}  <!--
+-->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v14}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.4_DART-MX8M}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.4_DART-MX8M}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vTorudhfOK_djEwVuzvB3J8-3XMsZLj1eANTo-6O_Q3Qhhd0ppJnGTt-e7uSmw5KK3dA3Qa1aFEi0Wk/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Morty}}  <!--
+-->{{#vardefine:YOCTO_NAME|Morty}} <!--
--->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.2.1}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 4,449: / Line 4,405: @@
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.9.51_mx8mq-ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.9.51_mx8mq-ga}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-aarch64-toolchain-4.9.51-mx8-ga.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-aarch64-toolchain-4.9.51-mx8-ga.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.51-mx8-ga.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.51-mx8-ga.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.9.51-mx8-ga}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.9.51-mx8-ga}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 4,500: / Line 4,456: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|imx8m-var-dart-emmc-wifi-dcss-lvds.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|imx8m-var-dart-sd-emmc-dcss-lvds.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|imx8m-var-dart.dtb}} <section end=RELEASE_MORTY_V1.4_DART-MX8M/>
+-->{{#vardefine:DEFAULT_DTB|imx8m-var-dart.dtb}}
 === sumo-fsl-4.14.78-mx8m-v1.0 ===
-<section begin=RELEASE_SUMO_V1.0_DART-MX8M/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8m-var-dart}} <!--
@@ Line 4,510: / Line 4,466: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v20}}  <!--
+-->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v20}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.0_DART-MX8M}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.0_DART-MX8M}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQB5TbbIC30b-kQxDEOgIRingHkKbxk59WnWxHiDt4h-ntwunK9Q2InX0_gWgqR7qBsiSDg3p5Mik43/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 4,524: / Line 4,480: @@
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga,}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga,}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 4,576: / Line 4,532: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mq-var-dart-sd-emmc-lvds.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}} <section end=RELEASE_SUMO_V1.0_DART-MX8M/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}}
 === sumo-fsl-4.14.78-mx8m-v1.1 ===
-<section begin=RELEASE_SUMO_V1.1_DART-MX8M/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8m-var-dart}} <!--
@@ Line 4,586: / Line 4,542: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v21}}  <!--
+-->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v21}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_DART-MX8M}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_DART-MX8M}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vRXkPyhgtNI-8H-2IyCsOg1h70B5TLdr7QpHaVeBkLSIJNSFOmqThUwQRUIKHKlHaSjRHTQUPq5Gh01/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 4,600: / Line 4,556: @@
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga,}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga,}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 4,652: / Line 4,608: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mq-var-dart-sd-emmc-lvds.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}} <section end=RELEASE_SUMO_V1.1_DART-MX8M/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}}
 === sumo-fsl-4.14.78-mx8m-v1.2 ===
-<section begin=RELEASE_SUMO_V1.2_DART-MX8M/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8m-var-dart}} <!--
@@ Line 4,662: / Line 4,618: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v22}}  <!--
+-->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v22}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.2_DART-MX8M}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.2_DART-MX8M}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQk-l0WWgBef_rEEF-kVIu7Pjf1t8iW--vqDR_iVd1vNm24exKYxpEzULslC6y5w6HdNomftKXXqWPs/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 4,676: / Line 4,632: @@
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 4,728: / Line 4,684: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mq-var-dart-sd-emmc-lvds.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}} <section end=RELEASE_SUMO_V1.2_DART-MX8M/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}}
 === sumo-fsl-4.14.78-mx8m-v1.3 ===
-<section begin=RELEASE_SUMO_V1.3_DART-MX8M/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8m-var-dart}} <!--
@@ Line 4,738: / Line 4,694: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v23}}  <!--
+-->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v23}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.3_DART-MX8M}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.3_DART-MX8M}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQh-NdG_XCoed8Jnoww6jfqyMSJg1nEuYdDXsmiN4TVArXMsT4XqXwGOU7lhiNLEqxrem5vTI8GQfsg/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 4,752: / Line 4,708: @@
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 4,804: / Line 4,760: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mq-var-dart-sd-emmc-lvds.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}} <section end=RELEASE_SUMO_V1.3_DART-MX8M/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}}
 === sumo-fsl-4.14.98-mx8m-v2.0 ===
-<section begin=RELEASE_SUMO_V2.0_DART-MX8M/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mq-var-dart}} <!--
@@ Line 4,814: / Line 4,770: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mq-v2.0}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mq-v2.0}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.0_DART-MX8M}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.0_DART-MX8M}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vRHud1c40AgX_-sEO7u5SS-ngNCPKbcJRugpD6B1TVY8dfwbZf0lAmLgq51aNI1GO3BFpC-YUQRw5Ij/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 4,828: / Line 4,784: @@
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
 -->{{#vardefine:BUILD_FOLDER_WAYLAND|build_wayland}} <!--
@@ Line 4,880: / Line 4,836: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mq-var-dart-wifi-lvds.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mq-var-dart-sd-lvds.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}} <section end=RELEASE_SUMO_V2.0_DART-MX8M/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}}
 === sumo-fsl-4.14.98-mx8m-v2.1 ===
-<section begin=RELEASE_SUMO_V2.1_DART-MX8M/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mq-var-dart}} <!--
@@ Line 4,890: / Line 4,846: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mq-v2.1}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mq-v2.1}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.1_DART-MX8M}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.1_DART-MX8M}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vS_R7FDZc3XfXVyUvOFDvz7m_amnN-Mmj7TIBY2M7Kq0xRGqQkxS2DIm7YS6Tdc6RG4ZUqkmwPkAWc2/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 4,904: / Line 4,860: @@
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 4,956: / Line 4,912: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mq-var-dart-wifi-lvds.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mq-var-dart-sd-lvds.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}} <section end=RELEASE_SUMO_V2.1_DART-MX8M/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}}
 === sumo-fsl-4.14.98-mx8m-v2.2 ===
-<section begin=RELEASE_SUMO_V2.2_DART-MX8M/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mq-var-dart}} <!--
@@ Line 4,966: / Line 4,922: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mq-v2.2}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mq-v2.2}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.2_DART-MX8M}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.2_DART-MX8M}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vR57EavPDeqHOkEzGKps3_ybgAGSSiMDEt9ZJPevtTnKBS07F89f1tbvZLSUA7ebq9xXHqwl1op3zCj/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 4,980: / Line 4,936: @@
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 5,032: / Line 4,988: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mq-var-dart-wifi-lvds.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mq-var-dart-sd-lvds.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}} <section end=RELEASE_SUMO_V2.2_DART-MX8M/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}}
 === warrior-fsl-4.19.35-mx8m-v1.0 ===
-<section begin=RELEASE_WARRIOR_V1.0_DART-MX8M/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mq-var-dart}} <!--
@@ Line 5,042: / Line 4,998: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|warrior-fsl-4.19.35-mx8mq-v1.0}}  <!--
+-->{{#vardefine:RELEASE_NAME|warrior-fsl-4.19.35-mx8mq-v1.0}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_WARRIOR_V1.0_DART-MX8M}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_WARRIOR_V1.0_DART-MX8M}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSridLeg6dPCELERbcwIjh6czVGAVP4bRZCi_-h0aRbNfOwY_hhnoS_y5Fiynp5IOV8oezF3V9kQjz0/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Warrior}}  <!--
+-->{{#vardefine:YOCTO_NAME|Warrior}} <!--
--->{{#vardefine:YOCTO_VERSION|2.7}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.7}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,055: / Line 5,011: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.19.35-1.1.0}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.19.35-1.1.0}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.19-warrior.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.19-warrior.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.19-warrior.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.19-warrior.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.19-warrior}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.19-warrior}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
 -->{{#vardefine:BUILD_FOLDER_WAYLAND|build_wayland}} <!--
 -->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
@@ Line 5,108: / Line 5,064: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mm-var-dart.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mq-var-dart-wifi-lvds.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}} <section end=RELEASE_WARRIOR_V1.0_DART-MX8M/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mq-var-dart.dtb}}
 == DART-MX8M-MINI ==
 === sumo-fsl-4.14.78-mx8mm-v1.1 ===
-<section begin=RELEASE_SUMO_V1.1_DART-MX8M-MINI/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M-MINI}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mm-var-dart}} <!--
@@ Line 5,119: / Line 5,076: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|dart-mx8mm_SD_card_v11}}  <!--
+-->{{#vardefine:RELEASE_NAME|dart-mx8mm_SD_card_v11}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_DART-MX8M-MINI}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_DART-MX8M-MINI}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSWSu7zrspDCrBrkK56mJp1q7o5DcDWzov3_8V9NFab2L3dE1f3Fa7oF8ckcRjrt4GH8AtdkgtMRcCa/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,131: / Line 5,088: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M-MINI_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 5,183: / Line 5,140: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mm-var-dart.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mm-var-dart.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}} <section end=RELEASE_SUMO_V1.1_DART-MX8M-MINI/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}}
 === sumo-fsl-4.14.78-mx8mm-v1.3 ===
-<section begin=RELEASE_SUMO_V1.3_DART-MX8M-MINI/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M-MINI}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mm-var-dart}} <!--
@@ Line 5,193: / Line 5,150: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|dart-mx8mm_SD_card_v13}}  <!--
+-->{{#vardefine:RELEASE_NAME|dart-mx8mm_SD_card_v13}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.3_DART-MX8M-MINI}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.3_DART-MX8M-MINI}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vTU3kU66aBle7Hs4qA0Haw5_0xTBn-VCuLw5y_mzzmok0eCuGBZ8yfrdBLhQeQ2o9ZUrOPYmYW3adIU/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,205: / Line 5,162: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M-MINI_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 5,257: / Line 5,214: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mm-var-dart.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mm-var-dart.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}} <section end=RELEASE_SUMO_V1.3_DART-MX8M-MINI/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}}
 === sumo-fsl-4.14.78-mx8mm-v1.4 ===
-<section begin=RELEASE_SUMO_V1.4_DART-MX8M-MINI/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M-MINI}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mm-var-dart}} <!--
@@ Line 5,267: / Line 5,224: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|dart-mx8mm_SD_card_v14}}  <!--
+-->{{#vardefine:RELEASE_NAME|dart-mx8mm_SD_card_v14}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.4_DART-MX8M-MINI}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.4_DART-MX8M-MINI}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vTdCgBO88MvLKLO6s_yHJvrNn1QyPHTcvK7mkhW_BfxzLKJzcRifnwD_URtOGfAR9O7Vk2blv1Qxa5F/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,279: / Line 5,236: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M-MINI_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
 -->{{#vardefine:BUILD_FOLDER_WAYLAND|build_wayland}} <!--
 -->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
@@ Line 5,331: / Line 5,288: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mm-var-dart.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mm-var-dart.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}} <section end=RELEASE_SUMO_V1.4_DART-MX8M-MINI/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}}
 === sumo-fsl-4.14.78-mx8mm-v1.5 ===
-<section begin=RELEASE_SUMO_V1.5_DART-MX8M-MINI/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M-MINI}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mm-var-dart}} <!--
@@ Line 5,341: / Line 5,298: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|dart-mx8mm_SD_card_v15}}  <!--
+-->{{#vardefine:RELEASE_NAME|dart-mx8mm_SD_card_v15}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.5_DART-MX8M-MINI}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.5_DART-MX8M-MINI}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vRUF7Qq0ICJ3iK1XRJBqr-KabBp4RO8caACoBsfOJo3PvUk0woUixMjJzrhzIMnSykf7ymO_Pu6--TL/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,353: / Line 5,310: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M-MINI_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 5,405: / Line 5,362: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mm-var-dart.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mm-var-dart.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}} <section end=RELEASE_SUMO_V1.5_DART-MX8M-MINI/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}}
 === sumo-fsl-4.14.78-mx8mm-v1.6 ===
-<section begin=RELEASE_SUMO_V1.6_DART-MX8M-MINI/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M-MINI}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mm-var-dart}} <!--
@@ Line 5,415: / Line 5,372: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|dart-mx8mm_SD_card_v16}}  <!--
+-->{{#vardefine:RELEASE_NAME|dart-mx8mm_SD_card_v16}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.6_DART-MX8M-MINI}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.6_DART-MX8M-MINI}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vTUi_FDbxfclAUmA3yBU2YUQ7nLzbJNJwfJgssWRmvHmronq5wpxCDdEhCf7dwYqOAWE-Ns4CIFyUVs/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,427: / Line 5,384: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M-MINI_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.78-1.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 5,479: / Line 5,436: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mm-var-dart.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mm-var-dart.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}} <section end=RELEASE_SUMO_V1.6_DART-MX8M-MINI/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}}
 === sumo-fsl-4.14.98-mx8mm-v2.0 ===
-<section begin=RELEASE_SUMO_V2.0_DART-MX8M-MINI/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M-MINI}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mm-var-dart}} <!--
@@ Line 5,489: / Line 5,446: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mm-v2.0}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mm-v2.0}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.0_DART-MX8M-MINI}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.0_DART-MX8M-MINI}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQ5ag52-J6zXbkE9HJGbtztaMRHy57CO3of-FJsYxbgSF_Rtba1d6tySDyJ1Tf-_1ySrDYNK_ABFokk/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,501: / Line 5,458: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M-MINI_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
 -->{{#vardefine:BUILD_FOLDER_WAYLAND|build_wayland}} <!--
@@ Line 5,553: / Line 5,510: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mm-var-dart.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mm-var-dart.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}} <section end=RELEASE_SUMO_V2.0_DART-MX8M-MINI/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}}
 === sumo-fsl-4.14.98-mx8mm-v2.1 ===
-<section begin=RELEASE_SUMO_V2.1_DART-MX8M-MINI/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M-MINI}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mm-var-dart}} <!--
@@ Line 5,563: / Line 5,520: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mm-v2.1}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mm-v2.1}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.1_DART-MX8M-MINI}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.1_DART-MX8M-MINI}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQxytf3AurXhYppY3MfqwI9Szpe38HukzTohRxlIjrVcSIMJhqs7ggSfuyix1tFxXuxjw3aYk_Ay1ZL/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,575: / Line 5,532: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M-MINI_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 5,627: / Line 5,584: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mm-var-dart.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mm-var-dart.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}} <section end=RELEASE_SUMO_V2.1_DART-MX8M-MINI/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}}
 === sumo-fsl-4.14.98-mx8mm-v2.2 ===
-<section begin=RELEASE_SUMO_V2.2_DART-MX8M-MINI/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M-MINI}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mm-var-dart}} <!--
@@ Line 5,637: / Line 5,594: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mm-v2.2}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mm-v2.2}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.2_DART-MX8M-MINI}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.2_DART-MX8M-MINI}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSRSakmQpC8E54wt799D9F94-pjqfM5DnXnOOHOSu1jm9o4PUz1nn0AikDpVfq3fDXkZ9f6bGonFcWE/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,649: / Line 5,606: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M-MINI_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 5,701: / Line 5,658: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mm-var-dart.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mm-var-dart.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}} <section end=RELEASE_SUMO_V2.2_DART-MX8M-MINI/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}}
 === sumo-fsl-4.14.98-mx8mm-v2.4 ===
-<section begin=RELEASE_SUMO_V2.4_DART-MX8M-MINI/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M-MINI}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mm-var-dart}} <!--
@@ Line 5,711: / Line 5,668: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mm-v2.4}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mm-v2.4}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.4_DART-MX8M-MINI}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V2.4_DART-MX8M-MINI}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vR-JZ7Ne-yvfM6mVU1nHbVHkUGBxpoSv334ITWpCiVrQXkWQ-bXPUc-cQg0mT2YkK_Opm3DTO-mkPRU/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,723: / Line 5,680: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M-MINI_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 5,775: / Line 5,732: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mm-var-dart.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mm-var-dart.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}} <section end=RELEASE_SUMO_V2.4_DART-MX8M-MINI/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}}
 === warrior-fsl-4.19.35-mx8mm-v1.0 ===
-<section begin=RELEASE_WARRIOR_V1.0_DART-MX8M-MINI/>
 {{#vardefine:HARDWARE_NAME|DART-MX8M-MINI}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mm-var-dart}} <!--
@@ Line 5,785: / Line 5,742: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|warrior-fsl-4.19.35-mx8mm-v1.0}}  <!--
+-->{{#vardefine:RELEASE_NAME|warrior-fsl-4.19.35-mx8mm-v1.0}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_WARRIOR_V1.0_DART-MX8M-MINI}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_WARRIOR_V1.0_DART-MX8M-MINI}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vRUYlYFrjbztkYR4NQns86jGBq1LP-yfX5aIuvUD5wW1iaHnWkbpAhV9dsk6ABcGGb3GmU9RJLJutDX/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Warrior}}  <!--
+-->{{#vardefine:YOCTO_NAME|Warrior}} <!--
--->{{#vardefine:YOCTO_VERSION|2.7}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.7}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,797: / Line 5,754: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M-MINI_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.19.35-1.1.0}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.19.35-1.1.0}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.19-warrior.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.19-warrior.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.19-warrior.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.19-warrior.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.19-warrior}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.19-warrior}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 5,849: / Line 5,806: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mm-var-dart.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mm-var-dart.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}} <section end=RELEASE_WARRIOR_V1.0_DART-MX8M-MINI/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mm-var-dart.dtb}}
 == VAR-SOM-MX8M-NANO ==
 === sumo-fsl-4.14.98-mx8mn-v1.0 ===
-<section begin=RELEASE_SUMO_V1.0_VAR-SOM-MX8M-NANO/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX8M-NANO}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mn-var-som}} <!--
@@ Line 5,860: / Line 5,818: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mn-v1.0}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mn-v1.0}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.0_VAR-SOM-MX8M-NANO}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.0_VAR-SOM-MX8M-NANO}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSWrNPU09dTtDxiFclWmpZ3h84H9cTjqMG87THXl-_j5lb01Z-xjhYtD82QJ2qYutHfJHDaPMvNZPKS/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,872: / Line 5,830: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX8M-NANO_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.3.0}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.3.0}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8M-NANO/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 5,924: / Line 5,882: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mn-var-som.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mn-var-som.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mn-var-som.dtb}} <section end=RELEASE_SUMO_V1.0_VAR-SOM-MX8M-NANO/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mn-var-som.dtb}}
 === sumo-fsl-4.14.98-mx8mn-v1.1 ===
-<section begin=RELEASE_SUMO_V1.1_VAR-SOM-MX8M-NANO/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX8M-NANO}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8mn-var-som}} <!--
@@ Line 5,934: / Line 5,892: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8m}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mn-v1.1}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8mn-v1.1}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_VAR-SOM-MX8M-NANO}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_VAR-SOM-MX8M-NANO}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vToUh2WDvAlHJF6ANWCGfwYmCAx3W04deOX2nTk4-LH-Oslx36_QsgLy8g51rTzpD_cCCf32sEw-1uy/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 5,946: / Line 5,904: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX8M-NANO_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.3.1}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.3.1}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8M-NANO/Software/Linux/Yocto/imx-yocto-docs-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 5,998: / Line 5,956: @@
 -->{{#vardefine:DEFAULT_DTB_EMMC|fsl-imx8mn-var-som.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8mn-var-som.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8mn-var-som.dtb}} <section end=RELEASE_SUMO_V1.1_VAR-SOM-MX8M-NANO/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8mn-var-som.dtb}}
 == VAR-SOM-MX8X ==
@@ Line 6,428: / Line 6,386: @@
 == VAR-SOM-MX8 ==
 === sumo-fsl-4.14.98-mx8-v1.1 ===
-<section begin=RELEASE_SUMO_V1.1_VAR-SOM-MX8/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX8}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8qm-var-som}} <!--
@@ Line 6,436: / Line 6,395: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8}} <!--
--->{{#vardefine:RELEASE_NAME|var-som-mx8_SD_card_v11}}  <!--
+-->{{#vardefine:RELEASE_NAME|var-som-mx8_SD_card_v11}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_VAR-SOM-MX8}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_VAR-SOM-MX8}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vTORHdQAxyoBfxHTKIvEcBP8yQr0Qq6kes2IJ3Hv3IiFemFK1FRT8AukvxrhE7VR4oCS16PyjXPdWYZ/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 6,448: / Line 6,407: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX8_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 6,511: / Line 6,470: @@
 -->{{#vardefine:DEFAULT_DTB_WIFI|fsl-imx8qm-var-som.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8qm-var-som.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}} <section end=RELEASE_SUMO_V1.1_VAR-SOM-MX8/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}}
 === sumo-fsl-4.14.98-mx8-v1.2 ===
-<section begin=RELEASE_SUMO_V1.2_VAR-SOM-MX8/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX8}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8qm-var-som}} <!--
@@ Line 6,521: / Line 6,480: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.2}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.2}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.2_VAR-SOM-MX8}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.2_VAR-SOM-MX8}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vReGz2UB3uHZWgDB7JcmBSD3ifcZKnqP7vfe8ndsiG4g-vLpbrJYOJcp5-q_xJh5047u8ytDNfuxj1a/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 6,533: / Line 6,492: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX8_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 6,596: / Line 6,555: @@
 -->{{#vardefine:DEFAULT_DTB_WIFI|fsl-imx8qm-var-som.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8qm-var-som.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}} <section end=RELEASE_SUMO_V1.2_VAR-SOM-MX8/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}}
 === sumo-fsl-4.14.98-mx8-v1.3 ===
-<section begin=RELEASE_SUMO_V1.3_VAR-SOM-MX8/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX8}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8qm-var-som}} <!--
@@ Line 6,606: / Line 6,565: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.3}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.3}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.3_VAR-SOM-MX8}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.3_VAR-SOM-MX8}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vReGz2UB3uHZWgDB7JcmBSD3ifcZKnqP7vfe8ndsiG4g-vLpbrJYOJcp5-q_xJh5047u8ytDNfuxj1a/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 6,618: / Line 6,577: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX8_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
 -->{{#vardefine:BUILD_FOLDER_WAYLAND|build_wayland}} <!--
 -->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
 -->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
 -->{{#vardefine:KERNEL_VER|4.14.98}} <!--
@@ Line 6,681: / Line 6,640: @@
 -->{{#vardefine:DEFAULT_DTB_WIFI|fsl-imx8qm-var-som.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8qm-var-som.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}} <section end=RELEASE_SUMO_V1.3_VAR-SOM-MX8/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}}
 === sumo-fsl-4.14.98-mx8-v1.4 ===
-<section begin=RELEASE_SUMO_V1.4_VAR-SOM-MX8/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX8}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8qm-var-som}} <!--
@@ Line 6,691: / Line 6,650: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.4}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.4}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.4_VAR-SOM-MX8}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.4_VAR-SOM-MX8}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vS5LkvzrK4k4vrSWCCBZeSOaox-uXeZz42y2ZN3FklKP5jbjOv1tLiZOiHpJskSQxbiKeMvRZ4jxfJY/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 6,703: / Line 6,662: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX8_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 6,766: / Line 6,725: @@
 -->{{#vardefine:DEFAULT_DTB_WIFI|fsl-imx8qm-var-som.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8qm-var-som.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}} <section end=RELEASE_SUMO_V1.4_VAR-SOM-MX8/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}}
 === sumo-fsl-4.14.98-mx8-v1.5 ===
-<section begin=RELEASE_SUMO_V1.5_VAR-SOM-MX8/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX8}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8qm-var-som}} <!--
@@ Line 6,776: / Line 6,735: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.5}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.5}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.5_VAR-SOM-MX8}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.5_VAR-SOM-MX8}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQOlCSP2PzR7OgsoDir-_NFdpHHYAAwx-Fd5Fa3qkWp8I_BOomIi2NNKcsDkSJ6XnD9rW-tOadne_Ze/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 6,788: / Line 6,747: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX8_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 6,851: / Line 6,810: @@
 -->{{#vardefine:DEFAULT_DTB_WIFI|fsl-imx8qm-var-som.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8qm-var-som.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}} <section end=RELEASE_SUMO_V1.5_VAR-SOM-MX8/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}}
 === sumo-fsl-4.14.98-mx8-v1.6 ===
-<section begin=RELEASE_SUMO_V1.6_VAR-SOM-MX8/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX8}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8qm-var-som}} <!--
@@ Line 6,861: / Line 6,820: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.6}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.6}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.6_VAR-SOM-MX8}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.6_VAR-SOM-MX8}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQBdDpeuNIH7JuGrMpi9iDU_XuLTP7qrYv8ftO1kI3bCRsdsD5w8MOm9l8eDrfj7PvlZCo0751N6osr/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 6,873: / Line 6,832: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX8_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 6,936: / Line 6,895: @@
 -->{{#vardefine:DEFAULT_DTB_WIFI|fsl-imx8qm-var-som.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8qm-var-som.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}} <section end=RELEASE_SUMO_V1.6_VAR-SOM-MX8/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}}
 === sumo-fsl-4.14.98-mx8-v1.7 ===
-<section begin=RELEASE_SUMO_V1.7_VAR-SOM-MX8/>
 {{#vardefine:HARDWARE_NAME|VAR-SOM-MX8}} <!--
 -->{{#vardefine:MACHINE_NAME|imx8qm-var-som}} <!--
@@ Line 6,946: / Line 6,905: @@
 -->{{#vardefine:SOC_SERIES|imx8}} <!--
 -->{{#vardefine:SOC_FAMILY|imx8}} <!--
--->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.7}}  <!--
+-->{{#vardefine:RELEASE_NAME|sumo-fsl-4.14.98-mx8-v1.7}} <!--
--->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.7_VAR-SOM-MX8}}  <!--
+-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.7_VAR-SOM-MX8}} <!--
 -->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSP6pV_Ie3VVWUIo4LnqwYaZGMgT3o1pXj6kGvSyezBMfvR8zf697Jv-4dPx04MeLuy8n7OFGniqps8/pubhtml}} <!--
--->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
+-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
--->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
+-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
 -->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
 -->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
@@ Line 6,958: / Line 6,917: @@
 -->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX8_BOOT_BOARD}} <!--
 -->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
--->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}}  <!--
+-->{{#vardefine:FSL_BSP_VERSION|L4.14.98-2.0.0_ga}} <!--
 -->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-{{#var:FSL_BSP_VERSION}}}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-gui-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}}  <!--
+-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.14-sumo.sh}} <!--
--->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}}  <!--
+-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.14-sumo}} <!--
--->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}} <!--
--->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
+-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
--->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}}  <!--
+-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fsl-yocto}} <!--
--->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
+-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
 -->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
 -->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
@@ Line 7,021: / Line 6,980: @@
 -->{{#vardefine:DEFAULT_DTB_WIFI|fsl-imx8qm-var-som.dtb}} <!--
 -->{{#vardefine:DEFAULT_DTB_SD|fsl-imx8qm-var-som.dtb}} <!--
--->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}} <section end=RELEASE_SUMO_V1.7_VAR-SOM-MX8/>
+-->{{#vardefine:DEFAULT_DTB|fsl-imx8qm-var-som.dtb}}
+<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>

Yocto Platform Customization: Difference between revisions

Revision as of 09:13, 21 April 2020

Yocto

Documentation

Thud 2.6.2

Sumo 2.5

Rocko 2.4.3

Rocko 2.4.1

Rocko 2.4

Pyro 2.3.1

Morty 2.2.1

FSLC BSP 2.5

FSLC BSP 2.4

FSLC BSP 2.3

FSLC BSP 2.2

FSL BSP L4.1.15_2.0.0-ga

VAR-SOM-MX6

Build Results

Device tree

SD card image file tree

Flash Recovery SD from GUI

Flash from GUI

Setting the Boot Mode

MX6CustomBoard

SoloCustomBoard

DT6CustomBoard

DART-6UL

Build Results

Device tree

SD card image file tree

Flash Recovery SD from GUI

Flash from GUI

Setting the Boot Mode

Using only one Ethernet port

VAR-SOM-MX7

Build Results

Device tree

SD card image file tree

Flash Recovery SD from GUI

Flash from GUI

Setting the Boot Mode

DART-MX8M

Build Results

Device tree

SD card image file tree

SD card image file tree

Setting the Boot Mode

DART-MX8M-MINI

Build Results

Device tree

SD card image file tree

Setting the Boot Mode

VAR-SOM-MX8M-NANO

Build Results

Device tree

SD card image file tree

Setting the Boot Mode

VAR-SOM-MX8X

Build Results

Device tree

SD card image file tree

Setting the Boot Mode

VAR-SOM-MX8

Build Results

Device tree

SD card image file tree

Setting the Boot Mode

Platform Customizations

VAR-SOM-MX6

thud-fslc-4.14.78-mx6-v1.0

sumo-fslc-4.9.88-mx6-v1.2

sumo-fslc-4.9.88-mx6-v1.1

sumo-fslc-4.9.88-mx6-v1.0

rocko-fslc-4.9.11-mx6-v1.2

rocko-fslc-4.9.11-mx6-v1.1

rocko-fslc-4.9.11-mx6-v1.0

rocko-fslc-4.9.11-mx6-v1.0-beta

pyro-fslc-4.1.15-mx6-v1.0

pyro-fslc-4.1.15-mx6-v1.0-beta

morty-fslc-4.1.15-mx6-v1.0