Revision as of 01:39, 15 March 2020

Yocto

Documentation

Thud 2.6.2

Yocto Project Core - Thud 2.6.2

Documentation is available from www.yoctoproject.org

Sumo 2.5

Yocto Project Core - Sumo 2.5

Documentation is available from www.yoctoproject.org

Rocko 2.4.3

Yocto Project Core - Rocko 2.4.3

Documentation is available from www.yoctoproject.org

Rocko 2.4.1

Yocto Project Core - Rocko 2.4.1

Documentation is available from www.yoctoproject.org

Rocko 2.4

Yocto Project Core - Rocko 2.4

Documentation is available from www.yoctoproject.org

Pyro 2.3.1

Yocto Project Core - Pyro 2.3.1 (released on 07/21/2017)

Documentation is available from www.yoctoproject.org

Morty 2.2.1

Yocto Project Core - Morty 2.2.1 (released on 02/24/2017)

Documentation is available from www.yoctoproject.org

FSLC BSP 2.5

FSL Community BSP Release Notes 2.5 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.4

FSL Community BSP Release Notes 2.4 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.3

FSL Community BSP Release Notes 2.3 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.2

FSL Community BSP Release Notes 2.2 documentation

Documentation is available from http://freescale.github.io

FSL BSP L4.1.15_2.0.0-ga

Kernel documentation from fsl-yocto-L4.1.15_2.0.0-ga release

Documentation is available for download from fsl-yocto-imx-4.1.15_2.0.0-docs

VAR-SOM-MX6

Build Results

Image Name	Description
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB.
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB.
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

Device Tree Name	SOM type	Carrier Board type	LCD Type	Evaluation Kit name
uImage-imx6q-var-som-cap.dtb	VAR-SOM-MX6_V2 (Quad / Dual)	VAR-MX6CustomBoard	Capacitive touch	VAR-DVK-MX6_V2-PRO VAR-STK-MX6_V2
uImage-imx6q-var-som-res.dtb	VAR-SOM-MX6_V2 (Quad / Dual)	VAR-MX6CustomBoard	Resistive touch	VAR-DVK-MX6_V2-PRO VAR-STK-MX6_V2
uImage-imx6q-var-som-vsc.dtb	VAR-SOM-MX6_V2 (Quad / Dual)	VAR-SOLOCustomBoard	Capacitive LVDS touch	N/A
uImage-imx6dl-var-som-cap.dtb	VAR-SOM-MX6_V2 (DualLite / Solo)	VAR-MX6CustomBoard	Capacitive touch	N/A
uImage-imx6dl-var-som-res.dtb	VAR-SOM-MX6_V2 (DualLite / Solo)	VAR-MX6CustomBoard	Resistive touch	N/A
uImage-imx6dl-var-som-vsc.dtb	VAR-SOM-MX6_V2 (DualLite / Solo)	VAR-SOLOCustomBoard	Capacitive LVDS touch	N/A
uImage-imx6qp-var-som-cap.dtb	VAR-SOM-MX6_V2 (QuadPlus / DualPlus)	VAR-MX6CustomBoard	Capacitive touch	N/A
uImage-imx6qp-var-som-res.dtb	VAR-SOM-MX6_V2 (QuadPlus / DualPlus)	VAR-MX6CustomBoard	Resistive touch	N/A
uImage-imx6qp-var-som-vsc.dtb	VAR-SOM-MX6_V2 (QuadPlus / DualPlus)	VAR-SOLOCustomBoard	Capacitive LVDS touch	N/A
uImage-imx6dl-var-som-solo-vsc.dtb	VAR-SOM-SOLO / VAR-SOM-DUAL	VAR-SOLOCustomBoard	Capacitive LVDS touch	VAR-DVK-SOLO/DUAL VAR-STK-SOLO/DUAL
uImage-imx6dl-var-som-solo-cap.dtb	VAR-SOM-SOLO / VAR-SOM-DUAL	VAR-MX6CustomBoard	Capacitive touch	N/A
uImage-imx6dl-var-som-solo-res.dtb	VAR-SOM-SOLO / VAR-SOM-DUAL	VAR-MX6CustomBoard	Resistive touch	N/A
uImage-imx6q-var-dart.dtb	DART-MX6	VAR-DT6CustomBoard	Capacitive LVDS touch	VAR-DVK-DT6 VAR-STK-DT6

Device tree

Build individual device trees:

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6q-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6q-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-SOLOCustomBoard:
$ make -j4 imx6q-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6qp-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6qp-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-SOLOCustomBoard:
$ make -j4 imx6qp-var-som-vsc.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-solo-cap.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-solo-res.dtb

Build the device tree for VAR-SOM-SOLO on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-solo-vsc.dtb

Build the device tree for DART-MX6:
$ make -j4 imx6q-var-dart.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── SPL-nand
    ├── SPL-sd
    ├── imx6dl-var-som-cap.dtb
    ├── imx6dl-var-som-res.dtb
    ├── imx6dl-var-som-solo-cap.dtb
    ├── imx6dl-var-som-solo-res.dtb
    ├── imx6dl-var-som-solo-vsc.dtb
    ├── imx6dl-var-som-vsc.dtb
    ├── imx6q-var-dart.dtb
    ├── imx6q-var-som-cap.dtb
    ├── imx6q-var-som-res.dtb
    ├── imx6q-var-som-vsc.dtb
    ├── imx6qp-var-som-cap.dtb
    ├── imx6qp-var-som-res.dtb
    ├── imx6qp-var-som-vsc.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── uImage

Flash Recovery SD from GUI

Flash from GUI

Click the appropriate button:

Install Yocto SOLOCB NAND: Flash Yocto on NAND flash, on VAR-SOLOCustomBoard
Install Yocto SOLOCB eMMC: Flash Yocto on eMMC, on VAR-SOLOCustomBoard
Install Yocto MX6CB Res NAND: Flash Yocto with Resistive touch panel support on NAND flash, on VAR-MX6CustomBoard
Install Yocto MX6CB Cap NAND: Flash Yocto with Capacitive touch panel support on NAND flash, on VAR-MX6CustomBoard
Install Yocto MX6CB Res eMMC: Flash Yocto with Resistive touch panel support on eMMC, on VAR-MX6CustomBoard
Install Yocto MX6CB Cap eMMC: Flash Yocto with Capacitive touch panel support on eMMC, on VAR-MX6CustomBoard
Install Yocto DART (eMMC): Flash Yocto on eMMC, on VAR-DT6CustomBoard

Setting the Boot Mode

Follow the instruction below according to the appropriate carrier board type:

MX6CustomBoard

Booting your MX6CustomBoard system from SD card requires pushing the middle button while powering up the system. See picture below.

To boot a board using an SD card, follow the steps below:

Power-off the board.
Insert the SD card into the SD/MMC slot of the carrier board (DVK)
Push the middle button (Boot Select) and hold
Power-up the board
Release the middle button (Boot Select) after system starts to boot.
The board will automatically boot into Linux from the SD card

SoloCustomBoard

Booting your system requires switching the relevant DIP switch to "Boot from MMC". See picture below.

To boot board with SD card, Follow the steps below:

Power-off the board.
Insert the SD card into the SD/MMC slot of the carrier board (DVK)
Switch the relevant DIP switch to "Boot from MMC"
Power-up board
The board will automatically boot into Linux from SD card

DT6CustomBoard

Booting your system requires switching the relevant DIP switch to "Boot from SD card". See picture below.

To boot board with SD card, Follow the steps below:

Power-off the board.
Insert the SD card into the SD/MMC slot of the carrier board (DVK)
Switch the relevant DIP switch to "Boot from SD card"
Power-up board
The board will automatically boot into Linux from SD card

DART-6UL

Build Results

Image Name	How to use
fsl-image-gui-.sdcard	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash.
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
zImage-imx6ul-var-dart-emmc_wifi.dtb	Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-nand_wifi.dtb	Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-sd_emmc.dtb	Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ul-var-dart-sd_nand.dtb	Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
zImage-imx6ull-var-dart-emmc_wifi.dtb	Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-nand_wifi.dtb	Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-sd_emmc.dtb	Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ull-var-dart-sd_nand.dtb	Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)

Image Name	How to use
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
zImage-imx6ul-var-dart-emmc_wifi.dtb	Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-nand_wifi.dtb	Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-5g-emmc_wifi.dtb	Device tree blob for DART-6UL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-5g-nand_wifi.dtb	Device tree blob for DART-6UL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-sd_emmc.dtb	Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ul-var-dart-sd_nand.dtb	Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
zImage-imx6ull-var-dart-emmc_wifi.dtb	Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-nand_wifi.dtb	Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-5g-emmc_wifi.dtb	Device tree blob for DART-6ULL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-5g-nand_wifi.dtb	Device tree blob for DART-6ULL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-sd_emmc.dtb	Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ull-var-dart-sd_nand.dtb	Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)

Image Name	How to use
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ull-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)

Device tree

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-5g-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-5g-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL-5G with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-5g-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-5g-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-nand-wifi.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-5g-emmc_wifi.dtb
    ├── imx6ul-var-dart-5g-nand_wifi.dtb
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-5g-emmc_wifi.dtb
    ├── imx6ull-var-dart-5g-nand_wifi.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-5g-emmc_wifi.dtb
    ├── imx6ul-var-dart-5g-nand_wifi.dtb
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-5g-emmc_wifi.dtb
    ├── imx6ull-var-dart-5g-nand_wifi.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ull-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-nand-wifi.dtb
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── rootfs.tar.gz
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

Flash Recovery SD from GUI

Flash from GUI

Touch/Click on the appropriate icon:

Install Yocto NAND, WiFi: Flash Yocto with WiFi support to NAND flash
Install Yocto NAND, SD card: Flash Yocto with SD card support to NAND flash
Install Yocto eMMC (SD/WiFi) : Flash Yocto to eMMC (installs both SD card and WiFi dtbs to the BOOT partition and let U-Boot select between them at boot time)

Setting the Boot Mode

Booting your system from an SD card requires switching the Boot DIP switches. See picture below.

"00" The current position in the picture will set the system to boot from SD card
"01" Moving the right switch will set the system to boot from eMMC
"10" Moving the left switch will set the system to boot from NAND flash
"11" is illegal.

Be aware that your system has eMMC or NAND but never both.

Booting your system from an SD card requires switching the Boot DIP switches. See picture below.
On the VAR-6ULCustomBoard (with a DART-6UL):

"00" The current position in the picture will set the system to boot from SD card
"01" Moving the right switch will set the system to boot from eMMC
"10" Moving the left switch will set the system to boot from NAND flash
"11" is illegal.

Be aware that your system has eMMC or NAND but never both.

On the Concerto-Board (with a VAR-SOM-6UL):

ON-EXT: Boot from the external storage (SD card) - the current position in the picture
OFF-INT: Boot from the SOM's internal storage (eMMC/NAND flash)

Using only one Ethernet port

Apply the following patch to the Linux kernel source, for removing the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:

diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
index f79a356..032ed00 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
@@ -159,17 +159,6 @@
 	phy-reset-on-resume;
 	phy-handle = <&ethphy0>;
 	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	phy-reset-gpios=<&gpio1 10 1>;
-	phy-reset-duration=<100>;
-	phy-reset-on-resume;
-	status = "okay";
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -181,14 +170,6 @@
 			clock-names = "rmii-ref";
 			reg = <1>;
 		};
-
-		ethphy1: ethernet-phy@3 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			micrel,rmii-reference-clock-select-25-mhz;
-			clocks = <&rmii_ref_clk>;
-			clock-names = "rmii-ref";
-			reg = <3>;
-		};
 	};
 };
 
@@ -460,8 +441,8 @@
 			fsl,pins = <
 				MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x1b0b0	/* User LED */
 				MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x17059	/* User Button */
-				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+				MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+				MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
 #ifdef WIFI
 				MX6UL_PAD_GPIO1_IO03__REF_CLK_32K	0x03029	/* WLAN Slow Clock */
 #endif
@@ -481,20 +462,6 @@
 			>;
 		};
 
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-				MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0
-			>;
-		};
-
 		pinctrl_flexcan1: flexcan1grp{
 			fsl,pins = <
 				MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020

Notes:
- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build only the device trees and copy them to your SD card.
- In older kernel releases where there is no imx6ul-imx6ull-var-dart-common.dtsi file, the relevant file to edit is called imx6ul-var-dart.dtsi

To remove the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:
Edit the dtsi file of the reference carrier board in the Linux kernel source and remove the &fec1 and &fec2 nodes from it.
In case of the VAR-6ULCustomBoard (DART-6UL carrier), the file is arch/arm/boot/dts/imx6ul-imx6ull-var-dart-6ulcustomboard.dtsi.
In case of the Concerto-Board (VAR-SOM-6UL carrier), the file is arch/arm/boot/dts/imx6ul-imx6ull-var-som-concerto-board.dtsi.
The above will result in using the &fec1 node from the dtsi file of the SOM, as is (as the phy of the first Ethernet port is on the SOM), without adding the second port (which its phy is on the reference carrier board).
Notes:
- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build only the device trees and copy them to your SD card.

VAR-SOM-MX7

Build Results

Image Name	How to use
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
zImage-imx7d-var-som-emmc.dtb	Device tree blob for SOMs with eMMC.
zImage-imx7d-var-som-nand.dtb	Device tree blob for SOMs with NAND flash.
zImage-imx7d-var-som-emmc-m4.dtb	Device tree blob for SOMs with eMMC and M4 support.
zImage-imx7d-var-som-nand-m4.dtb	Device tree blob for SOMs with NAND flash and M4 support.

Device tree

Build only the device tree for VAR-SOM-MX7 with eMMC:
$ make -j4 imx7d-var-som-emmc.dtb

Build only the device tree for VAR-SOM-MX7 with NAND flash:
$ make -j4 imx7d-var-som-nand.dtb

Build only the device tree for VAR-SOM-MX7 with eMMC and M4 support:
$ make -j4 imx7d-var-som-emmc-m4.dtb

Build only the device tree for VAR-SOM-MX7 with NAND flash and M4 support:
$ make -j4 imx7d-var-som-nand-m4.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── u-boot.imx-nand
    ├── u-boot.imx-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

Flash Recovery SD from GUI

Flash from GUI

Touch/Click on the appropriate icon:

Install Yocto NAND flash: Flash Yocto to NAND flash
Install Yocto eMMC: Flash Yocto to eMMC

Setting the Boot Mode

Make sure the BOOT SELECT DIP switches on the carrier board are set correctly before you power on the board.

SW1-SW2
 0 - 0 : Boot from SD card
 1 - 0 : Boot from eMMC
 0 - 1 : Boot from NAND flash
 1 - 1 : Illegal

The VAR-SOM-MX7 SOM comes with either NAND or eMMC, but not both.

DART-MX8M

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-imx8m-var-dart-emmc-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-hdmi-4k.dtb	Device tree blob for eMMC, WIFI and HDMI 4K display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-dcss-lvds.dtb	Device tree blob for eMMC, WIFI and DCSS LVDS display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb	Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-dual-display.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration.
Image.gz-imx8m-var-dart-sd-emmc-hdmi.dtb	Device tree blob for SD, eMMC and HDMI display configuration.
Image.gz-imx8m-var-dart-sd-emmc-hdmi-4k.dtb	Device tree blob for SD, eMMC and HDMI 4K display configuration.
Image.gz-imx8m-var-dart-sd-emmc-dcss-lvds.dtb	Device tree blob for SD, eMMC and DCSS LVDS display configuration.
Image.gz-imx8m-var-dart-sd-emmc-lcdif-lvds.dtb	Device tree blob for SD, eMMC and LCDIF LVDS display configuration.
Image.gz-imx8m-var-dart-sd-emmc-dual-display.dtb	Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration.

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb	DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb	DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb	DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi-cb12.dtb	DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds-cb12.dtb	DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display-cb12.dtb	DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb	DTB for SD, eMMC and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds.dtb	DTB for SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb	DTB for SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi-cb12.dtb	DTB for SD, eMMC and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds-cb12.dtb	DTB for SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display-cb12.dtb	DTB for SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8mq-var-dart-sd-dp.dtb	DTB for eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-hdmi.dtb	DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds.dtb	DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-dp.dtb	DTB for eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb	DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-hdmi-cb12.dtb	DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-cb12.dtb	DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi-cb12.dtb	DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-dp.dtb	DTB for eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-hdmi.dtb	DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds.dtb	DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-dp.dtb	DTB for eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb	DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-hdmi-cb12.dtb	DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-cb12.dtb	DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi-cb12.dtb	DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-dp.dtb	DTB for M4, eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi.dtb	DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds.dtb	DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb	DTB for M4, eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb	DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi-cb12.dtb	DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-cb12.dtb	DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi-cb12.dtb	DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-dp.dtb	DTB for M4, eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb	DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds.dtb	DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb	DTB for M4, eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb	DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi-cb12.dtb	DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-cb12.dtb	DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi-cb12.dtb	DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2.

Device tree

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI display:
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI 4K display:
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi-4k.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and DCSS LVDS display:
$ make -j4 imx8m-var-dart-emmc-wifi-dcss-lvds.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and LCDIF LVDS display:
$ make -j4 imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and dual LVDS+HDMI display:
$ make -j4 imx8m-var-dart-emmc-wifi-dual-display.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and HDMI display:
$ make -j4 imx8m-var-dart-sd-emmc-hdmi.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and HDMI 4K display:
$ make -j4 imx8m-var-dart-sd-emmc-hdmi-4k.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and DCSS LVDS display:
$ make -j4 imx8m-var-dart-sd-emmc-dcss-lvds.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and LCDIF LVDS display:
$ make -j4 imx8m-var-dart-sd-emmc-lcdif-lvds.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and dual LVDS+HDMI display:
$ make -j4 imx8m-var-dart-sd-emmc-dual-display.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-lvds.dtb

Build only the device tree for DART-MX8M configuration with SD, eMMC, and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb

Build only the device tree for DART-MX8M configuration with eMMC, SD and DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-dp.dtb

Build only the device tree for DART-MX8M configuration with eMMC, SD and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-hdmi.dtb

Build only the device tree for DART-MX8M configuration with eMMC, SD and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds.dtb

Build only the device tree for DART-MX8M configuration with eMMC, SD and dual LVDS+DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M configuration with eMMC, SD and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-dp.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-hdmi.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and dual LVDS+DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M configuration with eMMC, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, SD and DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-dp.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, SD and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, SD and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, SD and dual LVDS+DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, SD and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, WIFI and DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-dp.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, WIFI and HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, WIFI and LVDS display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, WIFI and dual LVDS+DP display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M configuration with M4, eMMC, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_dp_evk
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_evk
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_evk_no_hdmi
    ├── imx-boot-sd.bin -> imx-boot-imx8mq-var-dart-sd.bin-flash_evk
    └── rootfs.tar.gz

DTB File Name	Description
imx8m-var-dart-emmc-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-hdmi-4k.dtb	Device tree blob for eMMC, WIFI and HDMI 4K display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-dcss-lvds.dtb	Device tree blob for eMMC, WIFI and DCSS LVDS display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb	Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-dual-display.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
imx8m-var-dart-sd-emmc-hdmi.dtb	Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-hdmi-4k.dtb	Device tree blob for SD, eMMC and HDMI 4K display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-dcss-lvds.dtb	Device tree blob for SD, eMMC and DCSS LVDS display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-lcdif-lvds.dtb	Device tree blob for SD, eMMC and LCDIF LVDS display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-dual-display.dtb	Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.

DTB File Name	Description
fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb	Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb	Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-emmc-lvds.dtb	Device tree blob for SD, eMMC and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb	Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.

DTB File Name	Description
fsl-imx8mq-var-dart-sd-dp.dtb	Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-hdmi.dtb	Device tree blob for eMMC, SD and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds.dtb	Device tree blob for eMMC, SD and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds-dp.dtb	Device tree blob for eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb	Device tree blob for eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-wifi-dp.dtb	Device tree blob for eMMC, WIFI and DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds.dtb	Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds-dp.dtb	Device tree blob for eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-sd-dp.dtb	Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-hdmi.dtb	Device tree blob for M4, eMMC, SD and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds.dtb	Device tree blob for M4, eMMC, SD and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb	Device tree blob for M4, eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb	Device tree blob for M4, eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-wifi-dp.dtb	Device tree blob for M4, eMMC, WIFI and DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb	Device tree blob for M4, eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds.dtb	Device tree blob for M4, eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb	Device tree blob for M4, eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb	Device tree blob for M4, eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW7
 0 : Boot from SD card
 1 : Boot from eMMC

DART-MX8M-MINI

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
fsl-imx8mm-var-dart.dtb	Device tree blob for DART-MX8M-MINI
fsl-imx8mm-var-som.dtb	Device tree blob for VAR-SOM-MX8M-MINI
fsl-imx8mm-var-som-rev10.dtb	Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0

Device tree

Build only the device tree for DART-MX8M-MINI:
$ make -j4 freescale/fsl-imx8mm-var-dart.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW7
 0 : Boot from SD card
 1 : Boot from eMMC

VAR-SOM-MX8M-NANO

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8mn-var-som.dtb	Device tree blob for SD, eMMC, WIFI and LVDS display configuration.

Device tree

Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/fsl-imx8mn-var-som.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW3
 0 : Boot from SD card
 1 : Boot from eMMC

VAR-SOM-MX8X

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8qxp-var-som-wifi.dtb	DTB for WIFI configuration. SD card disabled.
Image.gz-fsl-imx8qxp-var-som-sd.dtb	DTB for SD card configuration. WIFI disabled.

Device tree

Build only the device tree for VAR-SOM-MX8X WIFI configuration:
$ make -j4 freescale/fsl-imx8qxp-var-som-wifi.dtb

Build only the device tree for VAR-SOM-MX8X SD configuration:
$ make -j4 freescale/fsl-imx8qxp-var-som-sd.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

DTB File Name	Description
fsl-imx8qxp-var-som-wifi.dtb	Device tree blob for WIFI configuration. SD card disabled.
fsl-imx8qxp-var-som-sd.dtb	Device tree blob for SD configuration. WIFI disabled.

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW3
 0 : Boot from SD card
 1 : Boot from eMMC (Internal)

VAR-SOM-MX8

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8qm-var-som-dp.dtb	DTB file for VAR-SOM-MX8 with DP display
Image.gz-fsl-imx8qm-var-som-hdmi.dtb	DTB file for VAR-SOM-MX8 with HDMI display
Image.gz-fsl-imx8qm-var-som-lvds.dtb	DTB file for VAR-SOM-MX8 with LVDS display
Image.gz-fsl-imx8qm-var-spear-dp.dtb	DTB file for SPEAR-MX8 with DP display
Image.gz-fsl-imx8qm-var-spear-hdmi.dtb	DTB file for SPEAR-MX8 with HDMI display
Image.gz-fsl-imx8qm-var-spear-lvds.dtb	DTB file for SPEAR-MX8 with LVDS display

Device tree

Build device tree for VAR-SOM-MX8 with DP display:
$ make -j4 freescale/fsl-imx8qm-var-som-db.dtb

Build device tree for VAR-SOM-MX8 with HDMI display:
$ make -j4 freescale/fsl-imx8qm-var-som-hdmi.dtb

Build device tree for VAR-SOM-MX8 with LVDS display:
$ make -j4 freescale/fsl-imx8qm-var-som-db.dtb

Build device tree for SPEAR-MX8 with DP display:
$ make -j4 freescale/fsl-imx8qm-var-spear-db.dtb

Build device tree for SPEAR-MX8 with HDMI display:
$ make -j4 freescale/fsl-imx8qm-var-spear-hdmi.dtb

Build device tree for SPEAR-MX8 with LVDS display:
$ make -j4 freescale/fsl-imx8qm-var-spear-lvds.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

DTB File Name	Description
fsl-imx8qm-var-som-dp.dtb	Device tree blob for VAR-SOM-MX8 with DP display
fsl-imx8qm-var-som-hdmi.dtb	Device tree blob for VAR-SOM-MX8 with HDMI display
fsl-imx8qm-var-som-lvds.dtb	Device tree blob for VAR-SOM-MX8 with LVDS display
fsl-imx8qm-var-spear-dp.dtb	Device tree blob for SPEAR-MX8 with DP display
fsl-imx8qm-var-spear-hdmi.dtb	Device tree blob for SPEAR-MX8 with HDMI display
fsl-imx8qm-var-spear-lvds.dtb	Device tree blob for SPEAR-MX8 with LVDS display

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW3 on VAR-SOM-MX8, SW6 on SPEAR-MX8
 0 : Boot from SD card
 1 : Boot from eMMC (Internal)

Platform Customizations

VAR-SOM-MX6

thud-fslc-4.14.78-mx6-v1.0

RELEASE_NAME = thud-fslc-4.14.78-mx6-v1.0
RELEASE_LINK = RELEASE_THUD_V1.0_VAR-SOM-MX6
YOCTO_NAME = Thud
YOCTO_VERSION = 2.6.2
FSLC_BSP_VERSION = 2.6
FSL_BSP_VERSION = 4.14.78_1.0.0-ga
RECOVERY_SD_NAME = thud-fslc-4.14.78-mx6-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vRLGv5hcoA2R9ITwZJMFexLVh29V9A79Euq_0hO7fJNexczP92C0A0tgUZLUva4enuPVVZ4EtCV5xoy/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = thud
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

sumo-fslc-4.9.88-mx6-v1.2

RELEASE_NAME = sumo-fslc-4.9.88-mx6-v1.2
RELEASE_LINK = RELEASE_SUMO_V1.2_VAR-SOM-MX6
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
FSLC_BSP_VERSION = 2.5
FSL_BSP_VERSION = 4.9.88_2.0.0-ga
RECOVERY_SD_NAME = sumo-fslc-4.9.88-mx6-v1.2.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vSKd7IE5JQ_DWCDgnEmH-Mg_8A2k1YJmia0u8jvyytR14lMYCQ-rIkZprdoxQhry_cy73ZbWYPIpqHu/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.88_2.0.0_ga-var01
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

sumo-fslc-4.9.88-mx6-v1.1

RELEASE_NAME = sumo-fslc-4.9.88-mx6-v1.1
RELEASE_LINK = RELEASE_SUMO_V1.1_VAR-SOM-MX6
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
FSLC_BSP_VERSION = 2.5
FSL_BSP_VERSION = 4.9.88_2.0.0-ga
RECOVERY_SD_NAME = sumo-fslc-4.9.88-mx6-v1.1.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQPSx3AajKGeDmhNUx9Uw5qEe13_Dk2L35JjYC-bQiB5sD-P30ydA3lgq5e-UtmYN4_3ePo2GkM01Kn/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.88_2.0.0_ga-var01
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

sumo-fslc-4.9.88-mx6-v1.0

RELEASE_NAME = sumo-fslc-4.9.88-mx6-v1.0
RELEASE_LINK = RELEASE_SUMO_V1.0_VAR-SOM-MX6
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
FSLC_BSP_VERSION = 2.5
FSL_BSP_VERSION = 4.9.88_2.0.0-ga
RECOVERY_SD_NAME = sumo-fslc-4.9.88-mx6-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vSCKgCpBv3y1DnU2FFqQR6CUex8nPMLTdrrYyix9lLbz-o0pL6qoUIqSvMPc3eo0zlbAoGIKeo1WZjr/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.88_2.0.0_ga-var01
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

rocko-fslc-4.9.11-mx6-v1.2

RELEASE_NAME = rocko-fslc-4.9.11-mx6-v1.2
RELEASE_LINK = RELEASE_ROCKO_V1.2_VAR-SOM-MX6
YOCTO_NAME = Rocko
YOCTO_VERSION = 2.4.3
FSLC_BSP_VERSION = 2.4
FSL_BSP_VERSION = 4.9.11_1.0.0-ga
RECOVERY_SD_NAME = rocko-fslc-4.9.11-mx6-v1.2.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vR0eD_uZ7yKL1AlXX2JxuneUBoCN_ZZ5gc9-ty5IcRCF8nv2Lr9QLdZcQEXY3BJapcwtRvlp7ktdTb3/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = rocko
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

rocko-fslc-4.9.11-mx6-v1.1

RELEASE_NAME = rocko-fslc-4.9.11-mx6-v1.1
RELEASE_LINK = RELEASE_ROCKO_V1.1_VAR-SOM-MX6
YOCTO_NAME = Rocko
YOCTO_VERSION = 2.4.1
FSLC_BSP_VERSION = 2.4
FSL_BSP_VERSION = 4.9.11_1.0.0-ga
RECOVERY_SD_NAME = rocko-fslc-4.9.11-mx6-v1.1.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQZT4UfUc2les0vV8lRebjNtOwKySN6AG-kw-JGc7Nw1EME0_sDjZJoiGzaUPd_gXvwkYc5B32ouILp/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = rocko
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

rocko-fslc-4.9.11-mx6-v1.0

RELEASE_NAME = rocko-fslc-4.9.11-mx6-v1.0
RELEASE_LINK = RELEASE_ROCKO_V1.1_VAR-SOM-MX6
YOCTO_NAME = Rocko
YOCTO_VERSION = 2.4.1
FSLC_BSP_VERSION = 2.4
FSL_BSP_VERSION = 4.9.11_1.0.0-ga
RECOVERY_SD_NAME = rocko-fslc-4.9.11-mx6-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTaKepnaAwm1umGw59L0ukHEa6VIIlEM9btCiWaXW0jx3nOQmwJ3h2QxyBbH2nMEwmDC_GvFbowtonR/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = rocko
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

rocko-fslc-4.9.11-mx6-v1.0-beta

RELEASE_NAME = rocko-fslc-4.9.11-mx6-v1.0-beta
RELEASE_LINK = RELEASE_ROCKO_V1.0_BETA_VAR-SOM-MX6
YOCTO_NAME = Rocko
YOCTO_VERSION = 2.4
FSLC_BSP_VERSION = 2.4
FSL_BSP_VERSION = 4.9.11_1.0.0-ga
RECOVERY_SD_NAME = rocko-fslc-4.9.11-mx6-v1.0-beta.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQh6c1wcWTFZqE5coUlIQHX8PTo8E_aAuibOOcpD84DbVxF8ldWTdLx6beMC5xMSrdpOym-MNEe-YWt/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2015.04_4.1.15_1.1.0_ga_var03
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = rocko
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

pyro-fslc-4.1.15-mx6-v1.0

RELEASE_NAME = pyro-fslc-4.1.15-mx6-v1.0
RELEASE_LINK = RELEASE_PYRO_V1.0_VAR-SOM-MX6
YOCTO_NAME = Pyro
YOCTO_VERSION = 2.3.1
FSLC_BSP_VERSION = 2.3
FSL_BSP_VERSION = L4.1.15_2.0.0-ga
RECOVERY_SD_NAME = pyro-fslc-4.1.15-mx6-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vSpLBEmJDrgI_lRl_HSyZ-CRBH4eu3wbL9WO83wBIGvmDntL8_FNPQAhck1wcJMUrhygxDPHVxqjNiB/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var02
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2015.04_4.1.15_1.1.0_ga_var03
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = pyro
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

pyro-fslc-4.1.15-mx6-v1.0-beta

RELEASE_NAME = pyro-fslc-4.1.15-mx6-v1.0-beta
RELEASE_LINK = RELEASE_PYRO_V1.0_BETA_VAR-SOM-MX6
YOCTO_NAME = Pyro
YOCTO_VERSION = 2.3.1
FSLC_BSP_VERSION = 2.3
FSL_BSP_VERSION = L4.1.15_2.0.0-ga
RECOVERY_SD_NAME = pyro-fslc-4.1.15-mx6-v1.0-beta.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/1czYgOE6lEw9AmJukRSTcVGrW0DBpqNmH6rsFrO1fsMg/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var02
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2015.04_4.1.15_1.1.0_ga_var03
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = pyro
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

morty-fslc-4.1.15-mx6-v1.0

RELEASE_NAME = morty-fslc-4.1.15-mx6-v1.0
RELEASE_LINK = RELEASE_MORTY_V1.0_VAR-SOM-MX6
YOCTO_NAME = Morty
YOCTO_VERSION = 2.2.1
FSLC_BSP_VERSION = 2.2
FSL_BSP_VERSION = L4.1.15_2.0.0-ga
RECOVERY_SD_NAME = morty-fslc-4.1.15-mx6-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/1nMcgrux22pqd_6ewJDs1zO_57DoTLP2cdm1DKKTGCBQ/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var02
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2015.04_4.1.15_1.1.0_ga_var03
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = morty
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

morty-fslc-4.1.15-mx6-v1.1

RELEASE_NAME = morty-fslc-4.1.15-mx6-v1.1
RELEASE_LINK = RELEASE_MORTY_V1.1_VAR-SOM-MX6
YOCTO_NAME = Morty
YOCTO_VERSION = 2.2.1
FSLC_BSP_VERSION = 2.2
FSL_BSP_VERSION = L4.1.15_2.0.0-ga
RECOVERY_SD_NAME = morty-fslc-4.1.15-mx6-v1.1.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/1VYYGP6KQ991re4eJa8TT00vZbebBEuU-WEbnuB4hbXc/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var02
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2015.04_4.1.15_1.1.0_ga_var03
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = morty
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

morty-fslc-4.1.15-mx6-v1.0-beta

RELEASE_NAME = morty-fslc-4.1.15-mx6-v1.0-beta
RELEASE_LINK = RELEASE_MORTY_BETA_VAR-SOM-MX6
YOCTO_NAME = Morty
YOCTO_VERSION = 2.2.1
FSLC_BSP_VERSION = 2.2
FSL_BSP_VERSION = L4.1.15_2.0.0-ga
RECOVERY_SD_NAME = morty-fslc-4.1.15-mx6-v1.0-beta.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/1WN-kGn3r9mcJh0EdSE3wZNBmhw5g5A95facy6gSIFn4/pubhtml
MACHINE_NAME = var-som-mx6
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var02
KERNEL_IMAGE = uImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
KERNEL_KERNEL_BUILD_PARAMS = '
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2015.04_4.1.15_1.1.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = morty
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
NAND_ROOTFS_DEV = mtd3
QT_PLATFORM_PLUGIN = eglfs
RAM_LOAD_ADDRESS = 0x18100000
UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
UBOOT_PAD_SIZE = 0x1e0000
KERNEL_PAD_SIZE = 0x800000
DTB_START_ADDRESS = 0x3e0000

DART-6UL

morty-fslc-4.1.15-mx6ul-v1.0-beta

RELEASE_NAME = morty-fslc-4.1.15-mx6ul-v1.0-beta
RELEASE_LINK = RELEASE_MORTY_BETA_DART-6UL
YOCTO_NAME = Morty
YOCTO_VERSION = 2.2.1
FSLC_BSP_VERSION = 2.2
FSL_BSP_VERSION = L4.1.15_2.0.0-ga
RECOVERY_SD_NAME = morty-fslc-4.1.15-mx6ul-v1.0-beta.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/1SznePOwPHdnxkbqpmP_1u6v6gXSceIHrRVPLFPB7qHE/pubhtml
MACHINE_NAME = imx6ul-var-dart
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var02
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx6ul-var-dart_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2015.10_dart_6ul_var1
U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = morty
YOCTO_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS_MORTY
YOCTO_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD_NO_CONCERTO
KERNEL_DTB_SECTION = DART-6UL_DTB
SD_TREE_SECTION = DART-6UL_SD_TREE
EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
EMMC_ROOTFS_DEV = mmcblk1
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_PAD_SIZE = 0x200000
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

morty-fslc-4.1.15-mx6ul-v1.0

RELEASE_NAME = morty-fslc-4.1.15-mx6ul-v1.0
RELEASE_LINK = RELEASE_MORTY_V1.0_DART-6UL
YOCTO_NAME = Morty
YOCTO_VERSION = 2.2.1
FSLC_BSP_VERSION = 2.2
FSL_BSP_VERSION = L4.1.15_2.0.0-ga
RECOVERY_SD_NAME = morty-fslc-4.1.15-mx6ul-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/1nFdouD7N-phVy3GhUb5dU8C25qWVouCt_PLggpYm6s4/pubhtml
MACHINE_NAME = imx6ul-var-dart
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var02
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx6ul-var-dart_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2015.04_4.1.15_1.1.0_ga_var03
U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = morty
YOCTO_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS_MORTY
YOCTO_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD_NO_CONCERTO
KERNEL_DTB_SECTION = DART-6UL_DTB
SD_TREE_SECTION = DART-6UL_SD_TREE
EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
EMMC_ROOTFS_DEV = mmcblk1
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_PAD_SIZE = 0x200000
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

pyro-fslc-4.1.15-mx6ul-v1.0

RELEASE_NAME = pyro-fslc-4.1.15-mx6ul-v1.0
RELEASE_LINK = RELEASE_PYRO_V1.0_DART-6UL
YOCTO_NAME = Pyro
YOCTO_VERSION = 2.3.1
FSLC_BSP_VERSION = 2.3.1
FSL_BSP_VERSION = L4.1.15_2.0.0-ga
RECOVERY_SD_NAME = pyro-fslc-4.1.15-mx6ul-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vRpHJCyYRl7s-0v2OWhBi6dOlTka5drWPNJIrTXNEfRlSBvEVjixUKtfZmAR1FW86ZqyWVZxcu-S0kY/pubhtml
MACHINE_NAME = imx6ul-var-dart
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var02
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx6ul-var-dart_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2015.04_4.1.15_1.1.0_ga_var03
U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = pyro
YOCTO_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD_NO_CONCERTO
KERNEL_DTB_SECTION = DART-6UL_DTB
SD_TREE_SECTION = DART-6UL_SD_TREE
EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
EMMC_ROOTFS_DEV = mmcblk1
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_PAD_SIZE = 0x200000
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

pyro-fslc-4.1.15-mx6ul-v1.1

RELEASE_NAME = pyro-fslc-4.1.15-mx6ul-v1.1
RELEASE_LINK = RELEASE_PYRO_V1.1_DART-6UL
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/u/1/d/1ClqVTLdiGDyFje2YQ_H6p8tylbdFOP-r0iMRdi_hkU4/pubhtml
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var02

All other variables are the same as v1.2

pyro-fslc-4.1.15-mx6ul-v1.2

RELEASE_NAME = pyro-fslc-4.1.15-mx6ul-v1.2
RELEASE_LINK = RELEASE_PYRO_V1.2_DART-6UL
YOCTO_NAME = Pyro
YOCTO_VERSION = 2.3.1
FSLC_BSP_VERSION = 2.3.1
FSL_BSP_VERSION = L4.1.15_2.0.0-ga
RECOVERY_SD_NAME = pyro-fslc-4.1.15-mx6ul-v1.2.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vSQcQq4U7Sig_O05Ei2hSDxo3q-iXNmIj5g49gjWIBQja56l6o2jNjgc1fhl3lLfSSEk6WegeH10M--/pubhtml
MACHINE_NAME = imx6ul-var-dart
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var03
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx6ul-var-dart_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2015.04_4.1.15_1.1.0_ga_var03
U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = pyro
YOCTO_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD_NO_CONCERTO
KERNEL_DTB_SECTION = DART-6UL_DTB_PYRO_PLUS
SD_TREE_SECTION = DART-6UL_SD_TREE_PYRO_PLUS
EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
EMMC_ROOTFS_DEV = mmcblk1
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_PAD_SIZE = 0x200000
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

rocko-fslc-4.9.11-mx6ul-v1.0-beta

RELEASE_NAME = rocko-fslc-4.9.11-mx6ul-v1.0-beta
RELEASE_LINK = RELEASE_ROCKO_V1.0_BETA_DART-6UL
YOCTO_NAME = Rocko
YOCTO_VERSION = 2.4
FSLC_BSP_VERSION = 2.4
FSL_BSP_VERSION = 4.9.11_1.0.0-ga
RECOVERY_SD_NAME = rocko-fslc-4.9.11-mx6ul-v1.0-beta.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQE1S6-B5Wi0mtBsyUMoTf_Vs-mhyQBDCzpZAymGNhkEWJgZIcyIFyWRJNMzjOdXBNSY1xCLVx7kjlS/pubhtml
MACHINE_NAME = imx6ul-var-dart
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2015.04_4.1.15_1.1.0_ga_var03
U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = rocko
YOCTO_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD_NO_CONCERTO
KERNEL_DTB_SECTION = DART-6UL_DTB_PYRO_PLUS
SD_TREE_SECTION = DART-6UL_SD_TREE_PYRO_PLUS
EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
EMMC_ROOTFS_DEV = mmcblk1
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_PAD_SIZE = 0x200000
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

rocko-fslc-4.9.11-mx6ul-v1.0

RELEASE_NAME = rocko-fslc-4.9.11-mx6ul-v1.0
RELEASE_LINK = RELEASE_ROCKO_V1.0_DART-6UL
YOCTO_NAME = Rocko
YOCTO_VERSION = 2.4.1
FSLC_BSP_VERSION = 2.4
FSL_BSP_VERSION = 4.9.11_1.0.0-ga
RECOVERY_SD_NAME = rocko-fslc-4.9.11-mx6ul-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTUPjdt-nbNyWUFxjrkoIw4H-s1h5Uo3HYgYQvzHgL1SMIutt7fzGm1zq5vgwLQhNAb7fTqETSjBn2J/pubhtml
MACHINE_NAME = imx6ul-var-dart
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = rocko
YOCTO_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD_NO_CONCERTO
KERNEL_DTB_SECTION = DART-6UL_DTB_PYRO_PLUS
SD_TREE_SECTION = DART-6UL_SD_TREE_PYRO_PLUS
EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
EMMC_ROOTFS_DEV = mmcblk1
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_PAD_SIZE = 0x200000
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

rocko-fslc-4.9.11-mx6ul-v1.1

RELEASE_NAME = rocko-fslc-4.9.11-mx6ul-v1.1
RELEASE_LINK = RELEASE_ROCKO_V1.1_DART-6UL
YOCTO_NAME = Rocko
YOCTO_VERSION = 2.4.3
FSLC_BSP_VERSION = 2.4
FSL_BSP_VERSION = 4.9.11_1.0.0-ga
RECOVERY_SD_NAME = rocko-fslc-4.9.11-mx6ul-v1.1.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQ8x-FK8v6oSrDbs4NiZ4PkF7BWakCd813v59u3aV7tOM3CT8y3mTv1FQdN1VGWut5EkL_BHI5lSl0h/pubhtml
MACHINE_NAME = imx6ul-var-dart
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = rocko
YOCTO_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD_NO_CONCERTO
KERNEL_DTB_SECTION = DART-6UL_DTB_PYRO_PLUS
SD_TREE_SECTION = DART-6UL_SD_TREE_PYRO_PLUS
EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
EMMC_ROOTFS_DEV = mmcblk1
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_PAD_SIZE = 0x200000
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

sumo-fslc-4.9.88-mx6ul-v1.0

RELEASE_NAME = sumo-fslc-4.9.88-mx6ul-v1.0
RELEASE_LINK = RELEASE_SUMO_V1.0_DART-6UL
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
FSLC_BSP_VERSION = 2.5
FSL_BSP_VERSION = 4.9.88_2.0.0-ga
RECOVERY_SD_NAME = sumo-fslc-4.9.88-mx6ul-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vRP5AOoijVweqdVWlEcd_91GP2SwZxsjasIo1aPo-tUB38uvvx9Uc0AXQAfbqgtuIg1oipgbcDFypIR/pubhtml
MACHINE_NAME = imx6ul-var-dart
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.88_2.0.0_ga-var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = sumo
YOCTO_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD_NO_CONCERTO
KERNEL_DTB_SECTION = DART-6UL_DTB_PYRO_PLUS
SD_TREE_SECTION = DART-6UL_SD_TREE_SUMOPLUS
EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
EMMC_ROOTFS_DEV = mmcblk1
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_PAD_SIZE = 0x200000
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

sumo-fslc-4.9.88-mx6ul-v1.1

RELEASE_NAME = sumo-fslc-4.9.88-mx6ul-v1.1
RELEASE_LINK = RELEASE_SUMO_V1.1_DART-6UL
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
FSLC_BSP_VERSION = 2.5
FSL_BSP_VERSION = 4.9.88_2.0.0-ga
RECOVERY_SD_NAME = sumo-fslc-4.9.88-mx6ul-v1.1.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vRay6cZAwt3PltamyoY1Y714MkmV6s9u6MkBY5QaFphLlF6AKW4DBwuN6u0vZytzDh3thgQM8-z73dF/pubhtml
MACHINE_NAME = imx6ul-var-dart
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.88_2.0.0_ga-var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = sumo
YOCTO_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD_NO_CONCERTO
KERNEL_DTB_SECTION = DART-6UL_DTB_PYRO_PLUS
SD_TREE_SECTION = DART-6UL_SD_TREE_SUMOPLUS
EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
EMMC_ROOTFS_DEV = mmcblk1
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_PAD_SIZE = 0x200000
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

thud-fslc-4.14.78-mx6ul-v1.0

RELEASE_NAME = thud-fslc-4.14.78-mx6ul-v1.0
RELEASE_LINK = RELEASE_THUD_V1.0_DART-6UL
YOCTO_NAME = Thud
YOCTO_VERSION = 2.6.2
FSLC_BSP_VERSION = 2.6
FSL_BSP_VERSION = 4.14.78_1.0.0-ga
RECOVERY_SD_NAME = thud-fslc-4.14.78-mx6ul-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vSB0pDSNkfRPVIgO_k9yCBhYzz-BBi8TgRpwENMYsEiBwWsH-ha7zb2dtbMfDLHt6nTk9w_x8ml_jMo/pubhtml
MACHINE_NAME = imx6ul-var-dart
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = thud
YOCTO_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD_NO_CONCERTO
KERNEL_DTB_SECTION = DART-6UL_DTB_PYRO_PLUS
SD_TREE_SECTION = DART-6UL_SD_TREE_SUMOPLUS
EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
EMMC_ROOTFS_DEV = mmcblk1
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_PAD_SIZE = 0x200000
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

thud-fslc-4.14.78-mx6ul-v1.1

RELEASE_NAME = thud-fslc-4.14.78-mx6ul-v1.1
RELEASE_LINK = RELEASE_THUD_V1.1_DART-6UL
YOCTO_NAME = Thud
YOCTO_VERSION = 2.6.2
FSLC_BSP_VERSION = 2.6
FSL_BSP_VERSION = 4.14.78_1.0.0-ga
RECOVERY_SD_NAME = thud-fslc-4.14.78-mx6ul-v1.1.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vSHLwlrpj_m0xgtCTUlS8YIWNyISq6fG12zq1a5i_kN3kY2_lJmPQF0nUdi_ladlgzqUzCEzV7SWhXM/pubhtml
MACHINE_NAME = imx6ul-var-dart
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = thud
YOCTO_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS_THUD_1_1_PLUS
YOCTO_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
KERNEL_DTB_SECTION = DART-6UL_DTB_THUD_1_1_PLUS
SD_TREE_SECTION = DART-6UL_SD_TREE_THUD_1_1_PLUS
EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
EMMC_ROOTFS_DEV = mmcblk1
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_PAD_SIZE = 0x200000
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

VAR-SOM-MX7

morty-fslc-4.1.15-mx7-v1.0

RELEASE_NAME = morty-fslc-4.1.15-mx7-v1.0
RELEASE_LINK = RELEASE_MORTY_V1.0_VAR-SOM-MX7
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/1UqpIu3ztSIbsXqV52QFLjz-jhTXLfUtsX9-HQUy6tsQ/pubhtml

All other variables are the same as v1.1

morty-fslc-4.1.15-mx7-v1.1

RELEASE_NAME = morty-fslc-4.1.15-mx7-v1.1
RELEASE_LINK = RELEASE_MORTY_V1.1_VAR-SOM-MX7
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/1TjG1ZLv48GDhIHsrtThAqqezNvsd4i6kD6qn_Yac3qk/pubhtml

All other variables are the same as v1.2

morty-fslc-4.1.15-mx7-v1.2

RELEASE_NAME = morty-fslc-4.1.15-mx7-v1.2
RELEASE_LINK = RELEASE_MORTY_V1.2_VAR-SOM-MX7
YOCTO_NAME = Morty
YOCTO_VERSION = 2.2.1
FSLC_BSP_VERSION = 2.2
FSL_BSP_VERSION = L4.1.15_2.0.0-ga
RECOVERY_SD_NAME = morty-fslc-4.1.15-mx7-v1.2.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vRcG96qikRoOvjxjKNa67j-Vud2x4PN3r3cqRj5Tx0bYO9yMOYUY93OhYtMGXIOaWhrxeRj3kJfsJBz/pubhtml
MACHINE_NAME = imx7-var-som
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var02
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx7-var-som_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx7dvar_som_defconfig
U-BOOT_NAND_DEFCONFIG = mx7dvar_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = morty
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE_SPL
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX7_FLASH_SD_FROM_GUI
READ_ONLY_ROOTFS = '
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_CONFIG_FILE = include/configs/mx7dvar_som.h
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

pyro-fslc-4.1.15-mx7-v1.0

RELEASE_NAME = pyro-fslc-4.1.15-mx7-v1.0
RELEASE_LINK = RELEASE_PYRO_V1.0_VAR-SOM-MX7
YOCTO_NAME = Pyro
YOCTO_VERSION = 2.3.1
FSLC_BSP_VERSION = 2.3
FSL_BSP_VERSION = L4.1.15_2.0.0-ga
RECOVERY_SD_NAME = pyro-fslc-4.1.15-mx7-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/1EtR9uJKQp6W7-Ypw-scD5w_JoFRPqvlbpOWY1FtwhA0/pubhtml
MACHINE_NAME = imx7-var-som
KERNEL_GIT = https://github.com/varigit/linux-2.6-imx.git
KERNEL_BRANCH = imx-rel_imx_4.1.15_2.0.0_ga-var02
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx7-var-som_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx7dvar_som_defconfig
U-BOOT_NAND_DEFCONFIG = mx7dvar_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = pyro
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE_SPL
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX7_FLASH_SD_FROM_GUI
READ_ONLY_ROOTFS = '
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_CONFIG_FILE = include/configs/mx7dvar_som.h
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

rocko-fslc-4.9.11-mx7-v1.0

RELEASE_NAME = rocko-fslc-4.9.11-mx7-v1.0
RELEASE_LINK = RELEASE_ROCKO_V1.0_VAR-SOM-MX7
YOCTO_NAME = Rocko
YOCTO_VERSION = 2.4.1
FSLC_BSP_VERSION = 2.4
FSL_BSP_VERSION = 4.9.11_1.0.0-ga
RECOVERY_SD_NAME = rocko-fslc-4.9.11-mx7-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTHNiQATuLGEsjNKtjysSOV0eyi9UznbvtR-32fJjIeMUbfN0HA-O5v3v6n66_gbWZhL-fVS5dZG4Eq/pubhtml
MACHINE_NAME = imx7-var-som
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx7dvar_som_defconfig
U-BOOT_NAND_DEFCONFIG = mx7dvar_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.imx-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.imx-nand
SPL_SD_IMAGE_NAME = N/A
SPL_NAND_IMAGE_NAME = N/A
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = rocko
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX7_FLASH_SD_FROM_GUI
READ_ONLY_ROOTFS = '
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_CONFIG_FILE = include/configs/mx7dvar_som.h
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

rocko-fslc-4.9.11-mx7-v1.1

RELEASE_NAME = rocko-fslc-4.9.11-mx7-v1.1
RELEASE_LINK = RELEASE_ROCKO_V1.1_VAR-SOM-MX7
YOCTO_NAME = Rocko
YOCTO_VERSION = 2.4.1
FSLC_BSP_VERSION = 2.4
FSL_BSP_VERSION = 4.9.11_1.0.0-ga
RECOVERY_SD_NAME = rocko-fslc-4.9.11-mx7-v1.1.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTTwrzlkYha4mlDlqzqvQVknuhDA-9XMztIZTjTbOL_Azq74QQ1QGmTeUzz_hnY1MqB6gF_pZkYqPO9/pubhtml
MACHINE_NAME = imx7-var-som
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx7dvar_som_defconfig
U-BOOT_NAND_DEFCONFIG = mx7dvar_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = rocko
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE_SPL
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX7_FLASH_SD_FROM_GUI
READ_ONLY_ROOTFS = '
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_CONFIG_FILE = include/configs/mx7dvar_som.h
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

rocko-fslc-4.9.11-mx7-v1.2

RELEASE_NAME = rocko-fslc-4.9.11-mx7-v1.2
RELEASE_LINK = RELEASE_ROCKO_V1.2_VAR-SOM-MX7
YOCTO_NAME = Rocko
YOCTO_VERSION = 2.4.3
FSLC_BSP_VERSION = 2.4
FSL_BSP_VERSION = 4.9.11_1.0.0-ga
RECOVERY_SD_NAME = rocko-fslc-4.9.11-mx7-v1.2.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vR2bTPYqJDGU2YPWeIj4fMfoDVEhHundT94jJWMj9kJUkNnMJJy3wfpNofL0aX3pUb4jp2VnhyQ30_B/pubhtml
MACHINE_NAME = imx7-var-som
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx7dvar_som_defconfig
U-BOOT_NAND_DEFCONFIG = mx7dvar_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = rocko
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE_SPL
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX7_FLASH_SD_FROM_GUI
READ_ONLY_ROOTFS = '
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_CONFIG_FILE = include/configs/mx7dvar_som.h
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

sumo-fslc-4.9.88-mx7-v1.0

RELEASE_NAME = sumo-fslc-4.9.88-mx7-v1.0
RELEASE_LINK = RELEASE_SUMO_V1.0_VAR-SOM-MX7
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
FSLC_BSP_VERSION = 2.5
FSL_BSP_VERSION = 4.9.88_2.0.0-ga
RECOVERY_SD_NAME = sumo-fslc-4.9.88-mx7-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vSMG2mbXToagBx9ccpHN5ZCamxul5DG0bpFSYr1WQWCpYYG5XPdzoj8dQFNoWwFHNRq66aKVR23i5vY/pubhtml
MACHINE_NAME = imx7-var-som
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.88_2.0.0_ga-var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx7dvar_som_defconfig
U-BOOT_NAND_DEFCONFIG = mx7dvar_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE_SUMO_OR_SUMOPLUS
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX7_FLASH_SD_FROM_GUI
READ_ONLY_ROOTFS = '
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_CONFIG_FILE = include/configs/mx7dvar_som.h
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

sumo-fslc-4.9.88-mx7-v1.1

RELEASE_NAME = sumo-fslc-4.9.88-mx7-v1.1
RELEASE_LINK = RELEASE_SUMO_V1.1_VAR-SOM-MX7
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
FSLC_BSP_VERSION = 2.5
FSL_BSP_VERSION = 4.9.88_2.0.0-ga
RECOVERY_SD_NAME = sumo-fslc-4.9.88-mx7-v1.1.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vTV-PnPj3fDTzG2ibjKMRqjVnAlu6YtZawlDpXEftJlWZErqXv-puDGvHY7TK294wlGG8Uu5mRUinra/pubhtml
MACHINE_NAME = imx7-var-som
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.88_2.0.0_ga-var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx7dvar_som_defconfig
U-BOOT_NAND_DEFCONFIG = mx7dvar_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE_SUMO_OR_SUMOPLUS
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX7_FLASH_SD_FROM_GUI
READ_ONLY_ROOTFS = '
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_CONFIG_FILE = include/configs/mx7dvar_som.h
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

thud-fslc-4.14.78-mx7-v1.0

RELEASE_NAME = thud-fslc-4.14.78-mx7-v1.0
RELEASE_LINK = RELEASE_THUD_V1.0_VAR-SOM-MX7
YOCTO_NAME = Thud
YOCTO_VERSION = 2.6.2
FSLC_BSP_VERSION = 2.6
FSL_BSP_VERSION = 4.14.78_1.0.0-ga
RECOVERY_SD_NAME = thud-fslc-4.14.78-mx7-v1.0.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vRkDKongc0ReiZA0oquDXoNw8_qghoom5svFPSBPvHWxL-wIRq5FCocViYo8G7ODytfoheXqBQEAv5H/pubhtml
MACHINE_NAME = imx7-var-som
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = zImage
KERNEL_DEFCONFIG = imx_v7_var_defconfig
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = mx7dvar_som_defconfig
U-BOOT_NAND_DEFCONFIG = mx7dvar_som_nand_defconfig
U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
SPL_SD_IMAGE_NAME = SPL-sd
SPL_NAND_IMAGE_NAME = SPL-nand
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = '
YOCTO_BRANCH = thud
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE_THUD_OR_THUDPLUS
YOCTO_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX7_FLASH_SD_FROM_GUI
READ_ONLY_ROOTFS = '
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p2
NAND_ROOTFS_DEV = mtd4
QT_PLATFORM_PLUGIN = linuxfb
RAM_LOAD_ADDRESS = 0x83100000
UBOOT_CONFIG_FILE = include/configs/mx7dvar_som.h
KERNEL_PAD_SIZE = 0x7e0000
KERNEL_START_ADDRESS = 0x600000
DTB_START_ADDRESS = 0xde0000

DART-MX8M

morty-fsl-4.9.51-mx8m-v1.3

RELEASE_NAME = dart-mx8m_SD_card_v13
RELEASE_LINK = RELEASE_MORTY_V1.3_DART-MX8M
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vQyW2W3XQE4WG7NAHdw8lPXKfFAsVjqb-oNslF0QXFlc2C_4QGzVVMitvy9jlNgRXPnmZeogpM5swZQ/pubhtml
YOCTO_NAME = Morty
YOCTO_VERSION = 2.2.1
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-morty
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
FDT_TABLE_SECTION = DART-MX8M_FDT_TABLE_MORTY
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/4.14.78_1.0.0-ga
FSL_BSP_VERSION = L4.9.51_mx8mq-ga
RECOVERY_SD_NAME = dart-mx8m-recovery-sd.v13.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software
MACHINE_NAME = imx8m-var-dart
SOC = mx8mq
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.51_imx8m_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8m_var_dart_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.51_imx8m_ga_var01
U-BOOT_SD_DEFCONFIG = imx8m_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8m_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = imx8m-var-dart-emmc-wifi-dcss-lvds.dtb
DEFAULT_DTB_SD = = imx8m-var-dart-sd-emmc-dcss-lvds.dtb
DEFAULT_DTB = = imx8m-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = morty-imx-4.9.51-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.9.51_imx8m_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-7.4
IMX_ATF_PLAT = = imx8mq
IMX_MKIMAGE_SOC = = iMX8MQ

morty-fsl-4.9.51-mx8m-v1.4

RELEASE_NAME = dart-mx8m_SD_card_v14
RELEASE_LINK = RELEASE_MORTY_V1.4_DART-MX8M
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTorudhfOK_djEwVuzvB3J8-3XMsZLj1eANTo-6O_Q3Qhhd0ppJnGTt-e7uSmw5KK3dA3Qa1aFEi0Wk/pubhtml
YOCTO_NAME = Morty
YOCTO_VERSION = 2.2.1
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-morty
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
FDT_TABLE_SECTION = DART-MX8M_FDT_TABLE_MORTY
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/L4.9.51_mx8mq-ga
FSL_BSP_VERSION = L4.9.51_mx8mq-ga
RECOVERY_SD_NAME = dart-mx8m-recovery-sd.v14.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software
MACHINE_NAME = imx8m-var-dart
SOC = mx8mq
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.9.51_imx8m_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8m_var_dart_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2017.03_4.9.51_imx8m_ga_var01
U-BOOT_SD_DEFCONFIG = imx8m_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8m_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = imx8m-var-dart-emmc-wifi-dcss-lvds.dtb
DEFAULT_DTB_SD = = imx8m-var-dart-sd-emmc-dcss-lvds.dtb
DEFAULT_DTB = = imx8m-var-dart.dtb
TOOLCHAIN_INSTALL_XWAYLAND_NAME = = fsl-imx-xwayland-glibc-x86_64-meta-toolchain-aarch64-toolchain-4.9.51-mx8-ga.sh
TOOLCHAIN_INSTALL_QT5_NAME = = fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.51-mx8-ga.sh
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = morty-imx-4.9.51-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.9.51_imx8m_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-7.4
IMX_ATF_PLAT = = imx8mq
IMX_MKIMAGE_SOC = = iMX8MQ

sumo-fsl-4.14.78-mx8m-v1.0

RELEASE_NAME = dart-mx8m_SD_card_v20
RELEASE_LINK = RELEASE_SUMO_V1.0_DART-MX8M
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQB5TbbIC30b-kQxDEOgIRingHkKbxk59WnWxHiDt4h-ntwunK9Q2InX0_gWgqR7qBsiSDg3p5Mik43/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M_BUILD_RESULTS_SUMO_AND_UP
YOCTO_BOOT_BOARD_SECTION = DART-MX8M_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
FDT_TABLE_SECTION = DART-MX8M_FDT_TABLE_SUMO_PLUS
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/L4.9.51_mx8mq-ga
FSL_BSP_VERSION = L4.14.78-1.0.0_ga,
RECOVERY_SD_NAME = dart-mx8m-recovery-sd.v20.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software
MACHINE_NAME = imx8m-var-dart
SOC = mx8mq
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M_DTB_SUMO_PLUS
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8m_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8m_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb
DEFAULT_DTB_SD = = fsl-imx8mq-var-dart-sd-emmc-lvds.dtb
DEFAULT_DTB = = fsl-imx8mq-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.78-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.78_1.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.0
IMX_ATF_PLAT = = imx8mq
IMX_MKIMAGE_SOC = = iMX8MQ

sumo-fsl-4.14.78-mx8m-v1.1

RELEASE_NAME = dart-mx8m_SD_card_v21
RELEASE_LINK = RELEASE_SUMO_V1.1_DART-MX8M
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vRXkPyhgtNI-8H-2IyCsOg1h70B5TLdr7QpHaVeBkLSIJNSFOmqThUwQRUIKHKlHaSjRHTQUPq5Gh01/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M_BUILD_RESULTS_SUMO_AND_UP
YOCTO_BOOT_BOARD_SECTION = DART-MX8M_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
FDT_TABLE_SECTION = DART-MX8M_FDT_TABLE_SUMO_PLUS
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/L4.14.78-1.0.0_ga,
FSL_BSP_VERSION = L4.14.78-1.0.0_ga,
RECOVERY_SD_NAME = dart-mx8m-recovery-sd.v21.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software
MACHINE_NAME = imx8m-var-dart
SOC = mx8mq
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M_DTB_SUMO_PLUS
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8m_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8m_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb
DEFAULT_DTB_SD = = fsl-imx8mq-var-dart-sd-emmc-lvds.dtb
DEFAULT_DTB = = fsl-imx8mq-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.78-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.78_1.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.0
IMX_ATF_PLAT = = imx8mq
IMX_MKIMAGE_SOC = = iMX8MQ

sumo-fsl-4.14.78-mx8m-v1.2

RELEASE_NAME = dart-mx8m_SD_card_v22
RELEASE_LINK = RELEASE_SUMO_V1.2_DART-MX8M
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQk-l0WWgBef_rEEF-kVIu7Pjf1t8iW--vqDR_iVd1vNm24exKYxpEzULslC6y5w6HdNomftKXXqWPs/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M_BUILD_RESULTS_SUMO_AND_UP
YOCTO_BOOT_BOARD_SECTION = DART-MX8M_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
FDT_TABLE_SECTION = DART-MX8M_FDT_TABLE_SUMO_PLUS
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/L4.14.78-1.0.0_ga,
FSL_BSP_VERSION = L4.14.78-1.0.0_ga
RECOVERY_SD_NAME = dart-mx8m-recovery-sd.v22.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software
MACHINE_NAME = imx8m-var-dart
SOC = mx8mq
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M_DTB_SUMO_PLUS
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8m_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8m_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb
DEFAULT_DTB_SD = = fsl-imx8mq-var-dart-sd-emmc-lvds.dtb
DEFAULT_DTB = = fsl-imx8mq-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.78-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.78_1.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.0
IMX_ATF_PLAT = = imx8mq
IMX_MKIMAGE_SOC = = iMX8MQ

sumo-fsl-4.14.78-mx8m-v1.3

RELEASE_NAME = dart-mx8m_SD_card_v23
RELEASE_LINK = RELEASE_SUMO_V1.3_DART-MX8M
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQh-NdG_XCoed8Jnoww6jfqyMSJg1nEuYdDXsmiN4TVArXMsT4XqXwGOU7lhiNLEqxrem5vTI8GQfsg/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M_BUILD_RESULTS_SUMO_AND_UP
YOCTO_BOOT_BOARD_SECTION = DART-MX8M_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
FDT_TABLE_SECTION = DART-MX8M_FDT_TABLE_SUMO_PLUS
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/L4.14.78-1.0.0_ga
FSL_BSP_VERSION = L4.14.78-1.0.0_ga
RECOVERY_SD_NAME = dart-mx8m-recovery-sd.v23.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software
MACHINE_NAME = imx8m-var-dart
SOC = mx8mq
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M_DTB_SUMO_PLUS
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8m_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8m_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb
DEFAULT_DTB_SD = = fsl-imx8mq-var-dart-sd-emmc-lvds.dtb
DEFAULT_DTB = = fsl-imx8mq-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.78-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.78_1.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.0
IMX_ATF_PLAT = = imx8mq
IMX_MKIMAGE_SOC = = iMX8MQ

sumo-fsl-4.14.98-mx8m-v2.0

RELEASE_NAME = sumo-fsl-4.14.98-mx8mq-v2.0
RELEASE_LINK = RELEASE_SUMO_V2.0_DART-MX8M
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vRHud1c40AgX_-sEO7u5SS-ngNCPKbcJRugpD6B1TVY8dfwbZf0lAmLgq51aNI1GO3BFpC-YUQRw5Ij/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M_BUILD_RESULTS_SUMO_4_14_98_AND_UP
YOCTO_BOOT_BOARD_SECTION = DART-MX8M_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
FDT_TABLE_SECTION = DART-MX8M_FDT_TABLE_SUMO_4_14_98_PLUS
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/L4.14.78-1.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = dart-mx8m-recovery-sd.v30.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software
MACHINE_NAME = imx8mq-var-dart
SOC = mx8mq
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M_DTB_SUMO_4_14_98_PLUS
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8mq_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mq_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M_SD_TREE_SUMO_4_14_98_PLUS
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mq-var-dart-wifi-lvds.dtb
DEFAULT_DTB_SD = = fsl-imx8mq-var-dart-sd-lvds.dtb
DEFAULT_DTB = = fsl-imx8mq-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8mq
IMX_MKIMAGE_SOC = = iMX8MQ

sumo-fsl-4.14.98-mx8m-v2.1

RELEASE_NAME = sumo-fsl-4.14.98-mx8mq-v2.1
RELEASE_LINK = RELEASE_SUMO_V2.1_DART-MX8M
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vS_R7FDZc3XfXVyUvOFDvz7m_amnN-Mmj7TIBY2M7Kq0xRGqQkxS2DIm7YS6Tdc6RG4ZUqkmwPkAWc2/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M_BUILD_RESULTS_SUMO_4_14_98_AND_UP
YOCTO_BOOT_BOARD_SECTION = DART-MX8M_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
FDT_TABLE_SECTION = DART-MX8M_FDT_TABLE_SUMO_4_14_98_PLUS
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = dart-mx8m-recovery-sd.v31.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software
MACHINE_NAME = imx8mq-var-dart
SOC = mx8mq
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M_DTB_SUMO_4_14_98_PLUS
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8mq_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mq_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M_SD_TREE_SUMO_4_14_98_PLUS
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mq-var-dart-wifi-lvds.dtb
DEFAULT_DTB_SD = = fsl-imx8mq-var-dart-sd-lvds.dtb
DEFAULT_DTB = = fsl-imx8mq-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8mq
IMX_MKIMAGE_SOC = = iMX8MQ

DART-MX8M-MINI

sumo-fsl-4.14.78-mx8mm-v1.1

RELEASE_NAME = dart-mx8mm_SD_card_v11
RELEASE_LINK = RELEASE_SUMO_V1.1_DART-MX8M-MINI
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vSWSu7zrspDCrBrkK56mJp1q7o5DcDWzov3_8V9NFab2L3dE1f3Fa7oF8ckcRjrt4GH8AtdkgtMRcCa/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-L4.14.78-1.0.0_ga
FSL_BSP_VERSION = L4.14.78-1.0.0_ga
RECOVERY_SD_NAME = dart-mx8mm-recovery-sd.v11.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software
MACHINE_NAME = imx8mm-var-dart
SOC = mx8mm
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mm_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB_SD = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB = = fsl-imx8mm-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.78-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.78_1.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.0
IMX_ATF_PLAT = = imx8mm
IMX_MKIMAGE_SOC = = iMX8MM

sumo-fsl-4.14.78-mx8mm-v1.3

RELEASE_NAME = dart-mx8mm_SD_card_v13
RELEASE_LINK = RELEASE_SUMO_V1.3_DART-MX8M-MINI
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTU3kU66aBle7Hs4qA0Haw5_0xTBn-VCuLw5y_mzzmok0eCuGBZ8yfrdBLhQeQ2o9ZUrOPYmYW3adIU/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-L4.14.78-1.0.0_ga
FSL_BSP_VERSION = L4.14.78-1.0.0_ga
RECOVERY_SD_NAME = dart-mx8mm-recovery-sd.v13.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software
MACHINE_NAME = imx8mm-var-dart
SOC = mx8mm
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mm_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB_SD = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB = = fsl-imx8mm-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.78-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.78_1.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.0
IMX_ATF_PLAT = = imx8mm
IMX_MKIMAGE_SOC = = iMX8MM

sumo-fsl-4.14.78-mx8mm-v1.4

RELEASE_NAME = dart-mx8mm_SD_card_v14
RELEASE_LINK = RELEASE_SUMO_V1.4_DART-MX8M-MINI
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTdCgBO88MvLKLO6s_yHJvrNn1QyPHTcvK7mkhW_BfxzLKJzcRifnwD_URtOGfAR9O7Vk2blv1Qxa5F/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-L4.14.78-1.0.0_ga
FSL_BSP_VERSION = L4.14.78-1.0.0_ga
RECOVERY_SD_NAME = dart-mx8mm-recovery-sd.v14.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software
MACHINE_NAME = imx8mm-var-dart
SOC = mx8mm
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mm_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB_SD = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB = = fsl-imx8mm-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.78-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.78_1.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.0
IMX_ATF_PLAT = = imx8mm
IMX_MKIMAGE_SOC = = iMX8MM

sumo-fsl-4.14.78-mx8mm-v1.5

RELEASE_NAME = dart-mx8mm_SD_card_v15
RELEASE_LINK = RELEASE_SUMO_V1.5_DART-MX8M-MINI
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vRUF7Qq0ICJ3iK1XRJBqr-KabBp4RO8caACoBsfOJo3PvUk0woUixMjJzrhzIMnSykf7ymO_Pu6--TL/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-L4.14.78-1.0.0_ga
FSL_BSP_VERSION = L4.14.78-1.0.0_ga
RECOVERY_SD_NAME = dart-mx8mm-recovery-sd.v15.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software
MACHINE_NAME = imx8mm-var-dart
SOC = mx8mm
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mm_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB_SD = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB = = fsl-imx8mm-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.78-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.78_1.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.0
IMX_ATF_PLAT = = imx8mm
IMX_MKIMAGE_SOC = = iMX8MM

sumo-fsl-4.14.78-mx8mm-v1.6

RELEASE_NAME = dart-mx8mm_SD_card_v16
RELEASE_LINK = RELEASE_SUMO_V1.6_DART-MX8M-MINI
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTUi_FDbxfclAUmA3yBU2YUQ7nLzbJNJwfJgssWRmvHmronq5wpxCDdEhCf7dwYqOAWE-Ns4CIFyUVs/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-L4.14.78-1.0.0_ga
FSL_BSP_VERSION = L4.14.78-1.0.0_ga
RECOVERY_SD_NAME = dart-mx8mm-recovery-sd.v16.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software
MACHINE_NAME = imx8mm-var-dart
SOC = mx8mm
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mm_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB_SD = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB = = fsl-imx8mm-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.78-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.78_1.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.0
IMX_ATF_PLAT = = imx8mm
IMX_MKIMAGE_SOC = = iMX8MM

sumo-fsl-4.14.98-mx8mm-v2.0

RELEASE_NAME = sumo-fsl-4.14.98-mx8mm-v2.0
RELEASE_LINK = RELEASE_SUMO_V2.0_DART-MX8M-MINI
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQ5ag52-J6zXbkE9HJGbtztaMRHy57CO3of-FJsYxbgSF_Rtba1d6tySDyJ1Tf-_1ySrDYNK_ABFokk/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = dart-mx8mm-recovery-sd.v20.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software
MACHINE_NAME = imx8mm-var-dart
SOC = mx8mm
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mm_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB_SD = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB = = fsl-imx8mm-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8mm
IMX_MKIMAGE_SOC = = iMX8MM

sumo-fsl-4.14.98-mx8mm-v2.1

RELEASE_NAME = sumo-fsl-4.14.98-mx8mm-v2.1
RELEASE_LINK = RELEASE_SUMO_V2.1_DART-MX8M-MINI
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQxytf3AurXhYppY3MfqwI9Szpe38HukzTohRxlIjrVcSIMJhqs7ggSfuyix1tFxXuxjw3aYk_Ay1ZL/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = dart-mx8mm-recovery-sd.v21.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software
MACHINE_NAME = imx8mm-var-dart
SOC = mx8mm
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mm_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB_SD = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB = = fsl-imx8mm-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8mm
IMX_MKIMAGE_SOC = = iMX8MM

sumo-fsl-4.14.98-mx8mm-v2.2

RELEASE_NAME = sumo-fsl-4.14.98-mx8mm-v2.2
RELEASE_LINK = RELEASE_SUMO_V2.2_DART-MX8M-MINI
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vSRSakmQpC8E54wt799D9F94-pjqfM5DnXnOOHOSu1jm9o4PUz1nn0AikDpVfq3fDXkZ9f6bGonFcWE/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = dart-mx8mm-recovery-sd.v22.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software
MACHINE_NAME = imx8mm-var-dart
SOC = mx8mm
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mm_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB_SD = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB = = fsl-imx8mm-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8mm
IMX_MKIMAGE_SOC = = iMX8MM

sumo-fsl-4.14.98-mx8mm-v2.4

RELEASE_NAME = sumo-fsl-4.14.98-mx8mm-v2.4
RELEASE_LINK = RELEASE_SUMO_V2.4_DART-MX8M-MINI
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vR-JZ7Ne-yvfM6mVU1nHbVHkUGBxpoSv334ITWpCiVrQXkWQ-bXPUc-cQg0mT2YkK_Opm3DTO-mkPRU/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = dart-mx8mm-recovery-sd.v24.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software
MACHINE_NAME = imx8mm-var-dart
SOC = mx8mm
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mm_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB_SD = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB = = fsl-imx8mm-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8mm
IMX_MKIMAGE_SOC = = iMX8MM

warrior-fsl-4.19.35-mx8mm-v3.0

RELEASE_NAME = warrior-fsl-4.19.35-mx8mm-v3.0
RELEASE_LINK = RELEASE_WARRIOR_V3.0_DART-MX8M-MINI
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vRUYlYFrjbztkYR4NQns86jGBq1LP-yfX5aIuvUD5wW1iaHnWkbpAhV9dsk6ABcGGb3GmU9RJLJutDX/pubhtml
YOCTO_NAME = Warrior
YOCTO_VERSION = 2.7
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-warrior
YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/Linux/Yocto/imx-yocto-docs-L4.19.35-1.1.0
FSL_BSP_VERSION = L4.19.35-1.1.0
RECOVERY_SD_NAME = dart-mx8mm-recovery-sd.v30.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software
MACHINE_NAME = imx8mm-var-dart
SOC = mx8mm
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.19.35_1.1.0_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2019.04_4.19.35_1.1.0-var01
U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 33
UBOOT_CONFIG_FILE = include/configs/imx8mm_var_dart.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB_SD = = fsl-imx8mm-var-dart.dtb
DEFAULT_DTB = = fsl-imx8mm-var-dart.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = warrior-imx-4.19.35-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.19.35_1.1.0
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.5
IMX_ATF_PLAT = = imx8mm
IMX_MKIMAGE_SOC = = iMX8MM

VAR-SOM-MX8M-NANO

sumo-fsl-4.14.98-mx8mn-v1.0

RELEASE_NAME = sumo-fsl-4.14.98-mx8mn-v1.0
RELEASE_LINK = RELEASE_SUMO_V1.0_VAR-SOM-MX8M-NANO
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vSWrNPU09dTtDxiFclWmpZ3h84H9cTjqMG87THXl-_j5lb01Z-xjhYtD82QJ2qYutHfJHDaPMvNZPKS/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8M-NANO_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8M-NANO_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8M-NANO/Software/Linux/Yocto/imx-yocto-docs-L4.14.98-2.3.0
FSL_BSP_VERSION = L4.14.98-2.3.0
RECOVERY_SD_NAME = var-som-mx8mn-recovery-sd.v10.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8M-NANO/Software
MACHINE_NAME = imx8mn-var-som
SOC = mx8mn
SOC_FAMILY = imx8m
SOC_SERIES = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.3.0_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8M-NANO_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.3.0_var01
U-BOOT_SD_DEFCONFIG = imx8mn_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8mn_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8M-NANO_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk2
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x40480000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_EMMC = = fsl-imx8mn-var-som.dtb
DEFAULT_DTB_SD = = fsl-imx8mn-var-som.dtb
DEFAULT_DTB = = fsl-imx8mn-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.3.0
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.4
IMX_ATF_PLAT = = imx8mn
IMX_MKIMAGE_SOC = = iMX8MN

VAR-SOM-MX8X

sumo-fsl-4.14.98-mx8x-v1.0

RELEASE_NAME = var-som-mx8x_SD_card_v10
RELEASE_LINK = RELEASE_SUMO_V1.0_VAR-SOM-MX8X
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vT1Kp-28JQAuy8paFj4MzJIjLGBiK-OC6k5cLgrFRS1ntAW690uepM_Y3RR_McqEtkeoLNqnEge1dY0/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8X_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8X_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software/Linux/Yocto/imx-yocto-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = var-som-mx8x-recovery-sd.v10.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software
MACHINE_NAME = imx8qxp-var-som
SOC = mx8qxp
SOC_SERIES = imx8
SOC_FAMILY = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8X_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8qxp_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8qxp_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8X_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x80280000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_WIFI = = fsl-imx8qxp-var-som-wifi.dtb
DEFAULT_DTB_SD = = fsl-imx8qxp-var-som-sd.dtb
DEFAULT_DTB = = fsl-imx8qxp-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8qx
IMX_MKIMAGE_SOC = = iMX8QX
SC_FIRMWARE = = mx8qx-var-som-scfw-tcm.bin
SECO_FIRMWARE = = mx8qx-ahab-container.img
SCFW_TOOLCHAIN_URL = = https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2
SCFW_TOOLCHAIN = = gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz
SCFW_URL = = https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.1_SCFWKIT-1.2.2&appType=license
SCFW_PACKAGE = = imx-scfw-porting-kit-1.2.2
SCFW_SOC = = mx8qx_b0
SCFW_PATCH_URL = = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software/SCFW
SCFW_PATCH = = scfw_mx8qxp_var-som_1.2.2.diff
SCFW_BRANCH = = 1.2.2
SCFW_GIT = = https://github.com/varigit/imx-sc-firmware.git

sumo-fsl-4.14.98-mx8x-v1.1

RELEASE_NAME = var-som-mx8x_SD_card_v11
RELEASE_LINK = RELEASE_SUMO_V1.1_VAR-SOM-MX8X
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vT7syGCNkY2sKGZ1GEsjkdASIfooGdXhf-qvEJCsaeyMHx7HXtopsCOpxiVozgNIMQWiO8qdehXDCdJ/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8X_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8X_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software/Linux/Yocto/imx-yocto-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = var-som-mx8x-recovery-sd.v11.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software
MACHINE_NAME = imx8qxp-var-som
SOC = mx8qxp
SOC_SERIES = imx8
SOC_FAMILY = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8X_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8qxp_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8qxp_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8X_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x80280000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_WIFI = = fsl-imx8qxp-var-som-wifi.dtb
DEFAULT_DTB_SD = = fsl-imx8qxp-var-som-sd.dtb
DEFAULT_DTB = = fsl-imx8qxp-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8qx
IMX_MKIMAGE_SOC = = iMX8QX
SC_FIRMWARE = = mx8qx-var-som-scfw-tcm.bin
SECO_FIRMWARE = = mx8qx-ahab-container.img
SCFW_TOOLCHAIN_URL = = https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2
SCFW_TOOLCHAIN = = gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz
SCFW_URL = = https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.1_SCFWKIT-1.2.2&appType=license
SCFW_PACKAGE = = imx-scfw-porting-kit-1.2.2
SCFW_SOC = = mx8qx_b0
SCFW_PATCH_URL = = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software/SCFW
SCFW_PATCH = = scfw_mx8qxp_var-som_1.2.2.diff
SCFW_BRANCH = = 1.2.2
SCFW_GIT = = https://github.com/varigit/imx-sc-firmware.git

sumo-fsl-4.14.98-mx8x-v1.2

RELEASE_NAME = var-som-mx8x_SD_card_v12
RELEASE_LINK = RELEASE_SUMO_V1.2_VAR-SOM-MX8X
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vSS4V6j9iHczKwh_TCVxUx91mhLvm5y7jPDnalMtVaVjDGD8RaiWNNpqMcO0T6uZFWMIrylnHWZdCI5/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8X_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8X_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software/Linux/Yocto/imx-yocto-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = var-som-mx8x-recovery-sd.v12.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software
MACHINE_NAME = imx8qxp-var-som
SOC = mx8qxp
SOC_SERIES = imx8
SOC_FAMILY = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8X_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8qxp_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8qxp_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8X_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x80280000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_WIFI = = fsl-imx8qxp-var-som-wifi.dtb
DEFAULT_DTB_SD = = fsl-imx8qxp-var-som-sd.dtb
DEFAULT_DTB = = fsl-imx8qxp-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8qx
IMX_MKIMAGE_SOC = = iMX8QX
SC_FIRMWARE = = mx8qx-var-som-scfw-tcm.bin
SECO_FIRMWARE = = mx8qx-ahab-container.img
SCFW_TOOLCHAIN_URL = = https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2
SCFW_TOOLCHAIN = = gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz
SCFW_URL = = https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.1_SCFWKIT-1.2.2&appType=license
SCFW_PACKAGE = = imx-scfw-porting-kit-1.2.2
SCFW_SOC = = mx8qx_b0
SCFW_PATCH_URL = = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software/SCFW
SCFW_PATCH = = scfw_mx8qxp_var-som_1.2.2.diff
SCFW_BRANCH = = 1.2.2
SCFW_GIT = = https://github.com/varigit/imx-sc-firmware.git

sumo-fsl-4.14.98-mx8x-v1.3

RELEASE_NAME = sumo-fsl-4.14.98-mx8x-v1.3
RELEASE_LINK = RELEASE_SUMO_V1.3_VAR-SOM-MX8X
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vT0Ym8Jo8pXSS_Ntb47BwoilE3BRPQSUBsB77JFjWKfdFfPcyNrc74VTm2ja4405x5QDNyQlgK7k8Er/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8X_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8X_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software/Linux/Yocto/imx-yocto-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = var-som-mx8x-recovery-sd.v13.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software
MACHINE_NAME = imx8qxp-var-som
SOC = mx8qxp
SOC_SERIES = imx8
SOC_FAMILY = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8X_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8qxp_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8qxp_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8X_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x80280000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_WIFI = = fsl-imx8qxp-var-som-wifi.dtb
DEFAULT_DTB_SD = = fsl-imx8qxp-var-som-sd.dtb
DEFAULT_DTB = = fsl-imx8qxp-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8qx
IMX_MKIMAGE_SOC = = iMX8QX
SC_FIRMWARE = = mx8qx-var-som-scfw-tcm.bin
SECO_FIRMWARE = = mx8qx-ahab-container.img
SCFW_TOOLCHAIN_URL = = https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2
SCFW_TOOLCHAIN = = gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz
SCFW_URL = = https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.1_SCFWKIT-1.2.2&appType=license
SCFW_PACKAGE = = imx-scfw-porting-kit-1.2.2
SCFW_SOC = = mx8qx_b0
SCFW_PATCH_URL = = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software/SCFW
SCFW_PATCH = = scfw_mx8qxp_var-som_1.2.2.diff
SCFW_BRANCH = = 1.2.2
SCFW_GIT = = https://github.com/varigit/imx-sc-firmware.git

VAR-SOM-MX8

sumo-fsl-4.14.98-mx8-v1.1

RELEASE_NAME = var-som-mx8_SD_card_v11
RELEASE_LINK = RELEASE_SUMO_V1.1_VAR-SOM-MX8
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTORHdQAxyoBfxHTKIvEcBP8yQr0Qq6kes2IJ3Hv3IiFemFK1FRT8AukvxrhE7VR4oCS16PyjXPdWYZ/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = var-som-mx8-recovery-sd.v11.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software
MACHINE_NAME = imx8qm-var-som
SOC = mx8qm
SOC_SERIES = imx8
SOC_FAMILY = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8qm_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8qm_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x80280000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_WIFI = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB_SD = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB = = fsl-imx8qm-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8qm
IMX_MKIMAGE_SOC = = iMX8QM
SC_FIRMWARE = = mx8qm-var-som-scfw-tcm.bin
SECO_FIRMWARE = = mx8qm-ahab-container.img
SCFW_TOOLCHAIN_URL = = https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2
SCFW_TOOLCHAIN = = gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz
SCFW_URL = = https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.1_SCFWKIT-1.2.2&appType=license
SCFW_PACKAGE = = imx-scfw-porting-kit-1.2.2
SCFW_SOC = = mx8qm_b0
SCFW_PATCH_URL = = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/SCFW
SCFW_PATCH = = scfw_mx8qm_var-som_1.2.2.diff
SCFW_BRANCH = = 1.2.8
SCFW_GIT = = https://github.com/varigit/imx-sc-firmware.git

sumo-fsl-4.14.98-mx8-v1.2

RELEASE_NAME = sumo-fsl-4.14.98-mx8-v1.2
RELEASE_LINK = RELEASE_SUMO_V1.2_VAR-SOM-MX8
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vReGz2UB3uHZWgDB7JcmBSD3ifcZKnqP7vfe8ndsiG4g-vLpbrJYOJcp5-q_xJh5047u8ytDNfuxj1a/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = var-som-mx8-recovery-sd.v12.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software
MACHINE_NAME = imx8qm-var-som
SOC = mx8qm
SOC_SERIES = imx8
SOC_FAMILY = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8qm_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8qm_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x80280000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_WIFI = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB_SD = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB = = fsl-imx8qm-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8qm
IMX_MKIMAGE_SOC = = iMX8QM
SC_FIRMWARE = = mx8qm-var-som-scfw-tcm.bin
SECO_FIRMWARE = = mx8qm-ahab-container.img
SCFW_TOOLCHAIN_URL = = https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2
SCFW_TOOLCHAIN = = gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz
SCFW_URL = = https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.1_SCFWKIT-1.2.2&appType=license
SCFW_PACKAGE = = imx-scfw-porting-kit-1.2.2
SCFW_SOC = = mx8qm_b0
SCFW_PATCH_URL = = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/SCFW
SCFW_PATCH = = scfw_mx8qm_var-som_1.2.2.diff
SCFW_BRANCH = = 1.2.8
SCFW_GIT = = https://github.com/varigit/imx-sc-firmware.git

sumo-fsl-4.14.98-mx8-v1.3

RELEASE_NAME = sumo-fsl-4.14.98-mx8-v1.3
RELEASE_LINK = RELEASE_SUMO_V1.3_VAR-SOM-MX8
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vReGz2UB3uHZWgDB7JcmBSD3ifcZKnqP7vfe8ndsiG4g-vLpbrJYOJcp5-q_xJh5047u8ytDNfuxj1a/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = var-som-mx8-recovery-sd.v13.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software
MACHINE_NAME = imx8qm-var-som
SOC = mx8qm
SOC_SERIES = imx8
SOC_FAMILY = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8qm_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8qm_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x80280000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_WIFI = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB_SD = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB = = fsl-imx8qm-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8qm
IMX_MKIMAGE_SOC = = iMX8QM
SC_FIRMWARE = = mx8qm-var-som-scfw-tcm.bin
SECO_FIRMWARE = = mx8qm-ahab-container.img
SCFW_TOOLCHAIN_URL = = https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2
SCFW_TOOLCHAIN = = gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz
SCFW_URL = = https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.1_SCFWKIT-1.2.2&appType=license
SCFW_PACKAGE = = imx-scfw-porting-kit-1.2.2
SCFW_SOC = = mx8qm_b0
SCFW_PATCH_URL = = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/SCFW
SCFW_PATCH = = scfw_mx8qm_var-som_1.2.2.diff
SCFW_BRANCH = = 1.2.8
SCFW_GIT = = https://github.com/varigit/imx-sc-firmware.git

sumo-fsl-4.14.98-mx8-v1.4

RELEASE_NAME = sumo-fsl-4.14.98-mx8-v1.4
RELEASE_LINK = RELEASE_SUMO_V1.4_VAR-SOM-MX8
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vS5LkvzrK4k4vrSWCCBZeSOaox-uXeZz42y2ZN3FklKP5jbjOv1tLiZOiHpJskSQxbiKeMvRZ4jxfJY/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = var-som-mx8-recovery-sd.v14.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software
MACHINE_NAME = imx8qm-var-som
SOC = mx8qm
SOC_SERIES = imx8
SOC_FAMILY = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8qm_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8qm_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x80280000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_WIFI = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB_SD = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB = = fsl-imx8qm-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8qm
IMX_MKIMAGE_SOC = = iMX8QM
SC_FIRMWARE = = mx8qm-var-som-scfw-tcm.bin
SECO_FIRMWARE = = mx8qm-ahab-container.img
SCFW_TOOLCHAIN_URL = = https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2
SCFW_TOOLCHAIN = = gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz
SCFW_URL = = https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.1_SCFWKIT-1.2.2&appType=license
SCFW_PACKAGE = = imx-scfw-porting-kit-1.2.2
SCFW_SOC = = mx8qm_b0
SCFW_PATCH_URL = = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/SCFW
SCFW_PATCH = = scfw_mx8qm_var-som_1.2.2.diff
SCFW_BRANCH = = 1.2.8
SCFW_GIT = = https://github.com/varigit/imx-sc-firmware.git

sumo-fsl-4.14.98-mx8-v1.5

RELEASE_NAME = sumo-fsl-4.14.98-mx8-v1.5
RELEASE_LINK = RELEASE_SUMO_V1.5_VAR-SOM-MX8
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQOlCSP2PzR7OgsoDir-_NFdpHHYAAwx-Fd5Fa3qkWp8I_BOomIi2NNKcsDkSJ6XnD9rW-tOadne_Ze/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = var-som-mx8-recovery-sd.v15.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software
MACHINE_NAME = imx8qm-var-som
SOC = mx8qm
SOC_SERIES = imx8
SOC_FAMILY = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8qm_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8qm_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x80280000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_WIFI = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB_SD = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB = = fsl-imx8qm-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8qm
IMX_MKIMAGE_SOC = = iMX8QM
SC_FIRMWARE = = mx8qm-var-som-scfw-tcm.bin
SECO_FIRMWARE = = mx8qm-ahab-container.img
SCFW_TOOLCHAIN_URL = = https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2
SCFW_TOOLCHAIN = = gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz
SCFW_URL = = https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.1_SCFWKIT-1.2.2&appType=license
SCFW_PACKAGE = = imx-scfw-porting-kit-1.2.2
SCFW_SOC = = mx8qm_b0
SCFW_PATCH_URL = = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/SCFW
SCFW_PATCH = = scfw_mx8qm_var-som_1.2.2.diff
SCFW_BRANCH = = 1.2.8
SCFW_GIT = = https://github.com/varigit/imx-sc-firmware.git

sumo-fsl-4.14.98-mx8-v1.6

RELEASE_NAME = sumo-fsl-4.14.98-mx8-v1.6
RELEASE_LINK = RELEASE_SUMO_V1.6_VAR-SOM-MX8
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vQBdDpeuNIH7JuGrMpi9iDU_XuLTP7qrYv8ftO1kI3bCRsdsD5w8MOm9l8eDrfj7PvlZCo0751N6osr/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = var-som-mx8-recovery-sd.v16.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software
MACHINE_NAME = imx8qm-var-som
SOC = mx8qm
SOC_SERIES = imx8
SOC_FAMILY = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8qm_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8qm_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x80280000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_WIFI = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB_SD = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB = = fsl-imx8qm-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8qm
IMX_MKIMAGE_SOC = = iMX8QM
SC_FIRMWARE = = mx8qm-var-som-scfw-tcm.bin
SECO_FIRMWARE = = mx8qm-ahab-container.img
SCFW_TOOLCHAIN_URL = = https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2
SCFW_TOOLCHAIN = = gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz
SCFW_URL = = https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.1_SCFWKIT-1.2.8&appType=license
SCFW_PACKAGE = = imx-scfw-porting-kit-1.2.8
SCFW_SOC = = mx8qm_b0
SCFW_PATCH_URL = = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/SCFW
SCFW_PATCH = = scfw_mx8qm_var-som_1.2.2.diff
SCFW_BRANCH = = 1.2.8
SCFW_GIT = = https://github.com/varigit/imx-sc-firmware.git

sumo-fsl-4.14.98-mx8-v1.7

RELEASE_NAME = sumo-fsl-4.14.98-mx8-v1.7
RELEASE_LINK = RELEASE_SUMO_V1.7_VAR-SOM-MX8
RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vSP6pV_Ie3VVWUIo4LnqwYaZGMgT3o1pXj6kGvSyezBMfvR8zf697Jv-4dPx04MeLuy8n7OFGniqps8/pubhtml
YOCTO_NAME = Sumo
YOCTO_VERSION = 2.5
YOCTO_GIT = https://github.com/varigit/variscite-bsp-platform.git
YOCTO_META_GIT = N/A
YOCTO_BRANCH = fsl-sumo
YOCTO_BUILD_RESULTS_SECTION = VAR-SOM-MX8_BUILD_RESULTS
YOCTO_BOOT_BOARD_SECTION = VAR-SOM-MX8_BOOT_BOARD
YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
YOCTO_DOC_FSL_BSP = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/Linux/Yocto/imx-yocto-L4.14.98-2.0.0_ga
FSL_BSP_VERSION = L4.14.98-2.0.0_ga
RECOVERY_SD_NAME = var-som-mx8-recovery-sd.v17.img.gz
RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software
MACHINE_NAME = imx8qm-var-som
SOC = mx8qm
SOC_SERIES = imx8
SOC_FAMILY = imx8
KERNEL_REPO_NAME = linux-imx
KERNEL_GIT = https://github.com/varigit/linux-imx.git
KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
KERNEL_IMAGE = Image.gz
KERNEL_DEFCONFIG = imx8_var_defconfig
KERNEL_PAD_SIZE = N/A
KERNEL_START_ADDRESS = N/A
KERNEL_DTB_SECTION = VAR-SOM-MX8_DTB
U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
U-BOOT_SD_DEFCONFIG = imx8qm_var_som_defconfig
U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
U-BOOT_OFFSET = 32
UBOOT_CONFIG_FILE = include/configs/imx8qm_var_som.h
SPL_SD_IMAGE_NAME = imx-boot-sd.bin
SD_TREE_SECTION = VAR-SOM-MX8_SD_TREE
READ_ONLY_ROOTFS = no
EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
EMMC_ROOTFS_DEV = mmcblk0
EMMC_ROOTFS_PARTITION_NUM = p1
RAM_LOAD_ADDRESS = 0x80280000
DTB_START_ADDRESS = N/A
BUILD_DISTRO = fsl-imx-xwayland
BUILD_FOLDER_XWAYLAND = = build_xwayland
BUILD_FOLDER_WAYLAND = = build_wayland
BUILD_FOLDER_ABSOLUTE_PATH = = /home/<uname>/var-fsl-yocto
DEFAULT_DTB_WIFI = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB_SD = = fsl-imx8qm-var-som.dtb
DEFAULT_DTB = = fsl-imx8qm-var-som.dtb
META_VARISCITE_GIT = = https://github.com/varigit/meta-variscite-imx
META_VARISCITE_BRANCH = = sumo-imx-4.14.98-var01
NXP_IMX_GIT = = https://source.codeaurora.org/external/imx
NXP_IMX_BRANCH = = imx_4.14.98_2.0.0_ga
NXP_FIRMWARE_URL = = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
NXP_FIRMWARE = = firmware-imx-8.1.1
IMX_ATF_PLAT = = imx8qm
IMX_MKIMAGE_SOC = = iMX8QM
SC_FIRMWARE = = mx8qm-var-som-scfw-tcm.bin
SECO_FIRMWARE = = mx8qm-ahab-container.img
SCFW_TOOLCHAIN_URL = = https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2
SCFW_TOOLCHAIN = = gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz
SCFW_URL = = https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.1_SCFWKIT-1.2.8&appType=license
SCFW_PACKAGE = = imx-scfw-porting-kit-1.2.8
SCFW_SOC = = mx8qm_b0
SCFW_PATCH_URL = = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8/Software/SCFW
SCFW_PATCH = = scfw_mx8qm_var-som_1.2.2.diff
SCFW_BRANCH = = 1.2.8
SCFW_GIT = = https://github.com/varigit/imx-sc-firmware.git

@@ Line 7,918: / Line 7,918: @@
 -->{{#vardefine:RELEASE_NAME|warrior-fsl-4.19.35-mx8mm-v3.0}}  <!--
 -->{{#vardefine:RELEASE_LINK|RELEASE_WARRIOR_V3.0_DART-MX8M-MINI}}  <!--
--->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSRSakmQpC8E54wt799D9F94-pjqfM5DnXnOOHOSu1jm9o4PUz1nn0AikDpVfq3fDXkZ9f6bGonFcWE/pubhtml}} <!--
+-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vRUYlYFrjbztkYR4NQns86jGBq1LP-yfX5aIuvUD5wW1iaHnWkbpAhV9dsk6ABcGGb3GmU9RJLJutDX/pubhtml}} <!--
 -->{{#vardefine:YOCTO_NAME|Warrior}}  <!--
 -->{{#vardefine:YOCTO_VERSION|2.7}}  <!--

Yocto Platform Customization: Difference between revisions

Revision as of 01:39, 15 March 2020

Yocto

Documentation

Thud 2.6.2

Sumo 2.5

Rocko 2.4.3

Rocko 2.4.1

Rocko 2.4

Pyro 2.3.1

Morty 2.2.1

FSLC BSP 2.5

FSLC BSP 2.4

FSLC BSP 2.3

FSLC BSP 2.2

FSL BSP L4.1.15_2.0.0-ga

VAR-SOM-MX6

Build Results

Device tree

SD card image file tree

Flash Recovery SD from GUI

Flash from GUI

Setting the Boot Mode

MX6CustomBoard

SoloCustomBoard

DT6CustomBoard

DART-6UL

Build Results

Device tree

SD card image file tree

Flash Recovery SD from GUI

Flash from GUI

Setting the Boot Mode

Using only one Ethernet port

VAR-SOM-MX7

Build Results

Device tree

SD card image file tree

Flash Recovery SD from GUI

Flash from GUI

Setting the Boot Mode

DART-MX8M

Build Results

Device tree

SD card image file tree

SD card image file tree

Setting the Boot Mode

DART-MX8M-MINI

Build Results

Device tree

SD card image file tree

Setting the Boot Mode

VAR-SOM-MX8M-NANO

Build Results

Device tree

SD card image file tree

Setting the Boot Mode

VAR-SOM-MX8X

Build Results

Device tree

SD card image file tree

Setting the Boot Mode

VAR-SOM-MX8

Build Results

Device tree

SD card image file tree

Setting the Boot Mode

Platform Customizations

VAR-SOM-MX6

thud-fslc-4.14.78-mx6-v1.0

sumo-fslc-4.9.88-mx6-v1.2

sumo-fslc-4.9.88-mx6-v1.1

sumo-fslc-4.9.88-mx6-v1.0

rocko-fslc-4.9.11-mx6-v1.2

rocko-fslc-4.9.11-mx6-v1.1

rocko-fslc-4.9.11-mx6-v1.0

rocko-fslc-4.9.11-mx6-v1.0-beta

pyro-fslc-4.1.15-mx6-v1.0

pyro-fslc-4.1.15-mx6-v1.0-beta

morty-fslc-4.1.15-mx6-v1.0