Debian Platform Customization: Difference between revisions

From Variscite Wiki
No edit summary
Line 2,032: Line 2,032:
-->{{#vardefine:TOOLCHAIN|gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu}} <!--
-->{{#vardefine:TOOLCHAIN|gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu}} <!--
-->{{#vardefine:DEBIAN_BRANCH|debian_buster_var01}} <section end=RELEASE_BUSTER_V1.1_VAR-SOM-MX8X/>
-->{{#vardefine:DEBIAN_BRANCH|debian_buster_var01}} <section end=RELEASE_BUSTER_V1.1_VAR-SOM-MX8X/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*DEBIAN_NAME = '''{{#var:DEBIAN_NAME}}'''
*DEBIAN_VERSION = '''{{#var:DEBIAN_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*DEBIAN_GIT = '''{{#var:DEBIAN_GIT}}'''
*DEBIAN_BRANCH = '''{{#var:DEBIAN_BRANCH}}'''
*DEBIAN_BUILD_RESULTS_SECTION = '''{{#var:DEBIAN_BUILD_RESULTS_SECTION}}'''
*DEBIAN_BOOT_BOARD_SECTION = '''{{#var:DEBIAN_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}
=== buster-4.14.98-imx8qxp-v1.2 ===
<section begin=RELEASE_BUSTER_V1.2_VAR-SOM-MX8X/>
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX8X}} <!--
-->{{#vardefine:ARCH|arm64}} <!--
-->{{#vardefine:CROSS_COMPILE|aarch64-linux-gnu-}} <!--
-->{{#vardefine:PROVIDE_UBIFS|NO}} <!--
-->{{#vardefine:SUPPORT_UBOOT_AUTO_DTB|NO}} <!--
-->{{#vardefine:SUPPORT_X11|NO}} <!--
-->{{#vardefine:YOCTO_RELEASE_LINK|RELEASE_SUMO_V1.3_VAR-SOM-MX8X}} <!--
-->{{#vardefine:RELEASE_NAME|buster-4.14.98-imx8qxp-v1.2}} <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_BUSTER_V1.2_VAR-SOM-MX8X}} <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vRyRN9mfqvHTvFSjnDO-NUnXU8KquqlAlZBm9iSWvRii3HBRQHB3_vuegtLAltIOS6ETTdvg74qUDLU/pubhtml}} <!--
-->{{#vardefine:DEBIAN_NAME|Buster}} <!--
-->{{#vardefine:DEBIAN_VERSION|10}} <!--
-->{{#vardefine:BUILD_FOLDER|~/var_imx8qxp-var-som_debian_buster}} <!--
-->{{#vardefine:BUILD_FOLDER_NAME|var_imx8qxp-var-som_debian_buster}} <!--
-->{{#vardefine:BUILD_SCRIPT|MACHINE=imx8qxp-var-som ./var_make_debian.sh}} <!--
-->{{#vardefine:MACHINE_NAME|imx8qxp-var-som}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/linux-imx.git}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.14.98_2.0.0_ga_var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx8_var_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2018.03_4.14.98_2.0.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|imx8qxp_var_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|imx8qxp_var_som_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx8mm_var_dart_mmc_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|mx8qxp-var-som-debian-recovery-sd.v12.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX8X/Software/debian}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX8X_DTB_BUSTER_PLUS}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX8X_SD_TREE_BUSTER_PLUS}} <!--
-->{{#vardefine:DEBIAN_GIT|https://github.com/varigit/debian-var.git}} <!--
-->{{#vardefine:DEBIAN_BUILD_RESULTS_SECTION|VAR-SOM-MX8X_BUILD_RESULTS}} <!--
-->{{#vardefine:DEBIAN_BOOT_BOARD_SECTION|VAR-SOM-MX8X_BOOT_BOARD}} <!--
-->{{#vardefine:DEBIAN_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX8X_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VAR8M}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:HAB_SIGN_IMAGE_SCRIPT|var-mx8_sign_image.sh}} <!--
-->{{#vardefine:SOC|mx8qxp}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
-->{{#vardefine:TOOLCHAIN|gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu}} <!--
-->{{#vardefine:DEBIAN_BRANCH|debian_buster_var01}} <section end=RELEASE_BUSTER_V1.2_VAR-SOM-MX8X/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''

Revision as of 12:46, 13 October 2019

Debian

Documentation

Stretch 9

  • Debian 9 - Stretch (released on 06/17/2017)

Documentation is available from wiki.debian.org


VAR-SOM-MX6

Build Results

The resulted images are located in ~/var_som_mx6_debian/output/.

Image name
 How to use
rootfs.tar.gz Root filesystem tarball used for installation on SD card and eMMC
uImage Linux kernel image
SPL.nand SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization
SPL.emmc SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization
u-boot.img.nand U-Boot built for NAND flash
u-boot.img.mmc U-Boot built for SD card or eMMC boot
Device Tree name
 Details
imx6dl-var-som-solo-cap.dtb VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with capacitive touch
imx6dl-var-som-solo-res.dtb VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with resistive touch
imx6dl-var-som-solo-vsc.dtb VAR-SOM-SOLO with iMX6S/DL on SOLOCustomBoard with capacitive touch
imx6dl-var-som-cap.dtb VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with capacitive touch
imx6dl-var-som-res.dtb VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with resistive touch
imx6dl-var-som-vsc.dtb VAR-SOM-MX6 with iMX6S/DL on SOLOCustomBoard with capacitive touch
imx6q-var-som-cap.dtb VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with capacitive touch
imx6q-var-som-res.dtb VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with resistive touch
imx6q-var-som-vsc.dtb VAR-SOM-MX6 with iMX6D/Q on SOLOCustomBoard with capacitive touch
imx6qp-var-som-cap.dtb VAR-SOM-MX6 with iMX6DP/QP on MX6CustomBoard with capacitive touch
imx6qp-var-som-res.dtb VAR-SOM-MX6 with iMX6DP/QP on MX6CustomBoard with resistive touch
imx6qp-var-som-vsc.dtb VAR-SOM-MX6 with iMX6DP/QP on SOLOCustomBoard with capacitive touch
imx6q-var-dart.dtb DART-MX6 with iMX6D/Q on DARTCustomBoard with capacitive touch


DART-6UL

Build Results

The resulted images are located in ~/var_mx6ul_dart_debian/output/.

Image name
 How to use
rootfs.tar.gz Root filesystem tarball used for installation on SD card and eMMC
rootfs.ubi.img Use for flash to NAND
zImage Linux kernel image
SPL.nand SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization
SPL.emmc SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization
u-boot.img.nand U-Boot built for NAND flash
u-boot.img.emmc U-Boot built for SD card or eMMC
Device Tree name
 Details
imx6ul-var-dart-emmc_wifi.dtb DART-6UL with eMMC and WiFi enabled. (SD card & NAND disabled)
imx6ul-var-dart-nand_wifi.dtb DART-6UL with l NAND and WiFi enabled. (SD card & eMMC disabled)
imx6ul-var-dart-sd_emmc.dtb DART-6UL with SD card and eMMC enabled (WiFi & NAND disabled). You can boot from eMMC or SD card
imx6ul-var-dart-sd_nand.dtb DART-6UL with SD card and NAND enabled (WiFi & eMMC disabled). You can boot from NAND or SD card
imx6ul-var-dart-5g-emmc_wifi.dtb DART-6UL-5G with eMMC and WiFi enabled. (SD card & NAND disabled)
imx6ul-var-dart-5g-nand_wifi.dtb DART-6UL-5G with l NAND and WiFi enabled. (SD card & eMMC disabled)
imx6ull-var-dart-emmc_wifi.dtb DART-6ULL with eMMC and WiFi enabled. (SD card & NAND disabled)
imx6ull-var-dart-nand_wifi.dtb DART-6ULL with l NAND and WiFi enabled. (SD card & eMMC disabled)
imx6ull-var-dart-sd_emmc.dtb DART-6ULL with SD card and eMMC enabled (WiFi & NAND disabled). You can boot from eMMC or SD card
imx6ull-var-dart-sd_nand.dtb DART-6ULL with SD card and NAND enabled (WiFi & eMMC disabled). You can boot from NAND or SD card
imx6ull-var-dart-5g-emmc_wifi.dtb DART-6ULL-5G with eMMC and WiFi enabled. (SD card & NAND disabled)
imx6ull-var-dart-5g-nand_wifi.dtb DART-6ULL-5G with l NAND and WiFi enabled. (SD card & eMMC disabled)



The resulted images are located in ~/var_mx6ul_dart_debian/output/.

Image name
 How to use
rootfs.tar.gz Root filesystem tarball used for installation on SD card and eMMC
rootfs.ubi.img Use for flash to NAND
zImage Linux kernel image
SPL.nand SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization
SPL.emmc SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization
u-boot.img.nand U-Boot built for NAND flash
u-boot.img.emmc U-Boot built for SD card or eMMC
Device Tree name
 Details
imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ull-var-som-concerto-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-som-concerto-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-som-concerto-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-som-concerto-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-som-concerto-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-som-concerto-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-som-concerto-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-som-concerto-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-som-concerto-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-som-concerto-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-som-concerto-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-som-concerto-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)


SD card image file tree

/opt/images/
└── Debian
    ├── imx6ul-var-dart-5g-emmc_wifi.dtb
    ├── imx6ul-var-dart-5g-nand_wifi.dtb
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-5g-emmc_wifi.dtb
    ├── imx6ull-var-dart-5g-nand_wifi.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi.img
    ├── SPL.mmc
    ├── SPL.nand
    ├── u-boot.img.mmc
    ├── u-boot.img.nand
    └── zImage



/opt/images/
└── Yocto
    ├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ull-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-nand-wifi.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi.img
    ├── SPL.mmc
    ├── SPL.nand
    ├── u-boot.img.mmc
    ├── u-boot.img.nand
    └── zImage


VAR-SOM-MX7

Build Results

The resulted images are located in ~/var_mx7_var_som_debian/output/.

Image name
 How to use
rootfs.tar.gz Root filesystem tarball used for installation on SD card and eMMC
rootfs.ubi.img Use for flash to nand
zImage Linux kernel image
SPL.nand SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization
SPL.emmc SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization
u-boot.img.nand U-Boot built for NAND flash
u-boot.img.emmc U-Boot built for SD card or eMMC boot
Device Tree name
 Details
imx7d-var-som-emmc.dtb Boot from SD or eMMC
imx7d-var-som-nand.dtb Boot from NAND
imx7d-var-som-emmc-m4.dtb Boot from SD or eMMC with M4 support
imx7d-var-som-nand-m4.dtb Boot from NAND with M4 support


DART-MX8M

Build Results

The resulted images are located in ~/var_mx8m_dart_debian/output/.

Image name
 How to use
rootfs.tar.gz Root filesystem tarball used for installation on SD card and eMMC
Image.gz Linux kernel image
imx-boot-sd.bin U-Boot built for SD card and eMMC
Device Tree name
 Details
fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb DART-MX8M with HDMI+LVDS, eMMC and WiFi (SD card disabled)
fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb DART-MX8M with HDMI, eMMC and WiFi (SD card disabled)
fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb DART-MX8M with LVDS, eMMC and WiFi (SD card disabled)
fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb DART-MX8M with HDMI+LVDS, eMMC and SD (WiFi card disabled)
fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb DART-MX8M with HDMI, eMMC and SD (WiFi card disabled)
fsl-imx8mq-var-dart-sd-emmc-lvds.dtb DART-MX8M with LVDS, eMMC and SD (WiFi card disabled)


The resulted images are located in ~/var_mx8m_dart_debian/output/.

Image name
 How to use
rootfs.tar.gz Root filesystem tarball used for installation on SD card and eMMC
Image.gz Linux kernel image
imx-boot-sd.bin U-Boot built for SD card and eMMC
Device Tree name
 Details
fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb DART-MX8M with eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.(SD card disabled)
fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb DART-MX8M with eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher. (SD card disabled)
fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb DART-MX8M with eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. (SD card disabled)
fsl-imx8mq-var-dart-emmc-wifi-hdmi-cb12.dtb DART-MX8M with eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled)
fsl-imx8mq-var-dart-emmc-wifi-lvds-cb12.dtb DART-MX8M with eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled)
fsl-imx8mq-var-dart-emmc-wifi-dual-display-cb12.dtb DART-MX8M with eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled)
fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb DART-MX8M with SD, eMMC and HDMI display configuration on carrier board revisions 1.3 and higher. (WIFI disabled)
fsl-imx8mq-var-dart-sd-emmc-lvds.dtb DART-MX8M with SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.3 and higher. (WIFI disabled)
fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb DART-MX8M with SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. (WIFI disabled)
fsl-imx8mq-var-dart-sd-emmc-hdmi-cb12.dtb DART-MX8M with SD, eMMC and HDMI display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled)
fsl-imx8mq-var-dart-sd-emmc-lvds-cb12.dtb DART-MX8M with SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled)
fsl-imx8mq-var-dart-sd-emmc-dual-display-cb12.dtb DART-MX8M with SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled)


DART-MX8M-MINI

Build Results

The resulted images are located in ~/var_mx8mm_dart_debian_buster/output/.

Image name
 How to use
rootfs.tar.gz Root filesystem tarball used for installation on SD card and eMMC
Image.gz Linux kernel image
imx-boot-sd.bin U-Boot built for SD card and eMMC
Device Tree name
 Details
fsl-imx8mm-var-dart.dtb Device tree blob for SD, eMMC, WIFI and LVDS display configuration.


VAR-SOM-MX8

Build Results

The resulted images are located in ~/var_imx8qxp-var-som_debian_buster/output/.

Image name
 How to use
rootfs.tar.gz Root filesystem tarball used for installation on SD card and eMMC
Image.gz Linux kernel image
imx-boot-sd.bin U-Boot built for SD card and eMMC
Device Tree name
 Details
fsl-imx8qxp-var-som-wifi.dtb Device tree blob for eMMC, WIFI and LVDS display configuration.
fsl-imx8qxp-var-som-sd.dtb Device tree blob for SD, eMMC and LVDS display configuration.


Platform Customizations

VAR-SOM-MX6

stretch-4.9.11-mx6-v1.0


stretch-4.9.88-mx6-v2.0


DART-6UL

stretch-4.9.11-mx6ul-v1.0


stretch-4.9.88-mx6ul-v2.0


stretch-4.14.78-mx6ul-v1.0


  • RELEASE_NAME = stretch-4.14.78-mx6ul-v1.0
  • RELEASE_LINK = RELEASE_STRETCH_V3.0_DART-6UL
  • DEBIAN_NAME = Stretch
  • DEBIAN_VERSION = 9.3
  • RECOVERY_SD_NAME = stretch-4.14.78-mx6ul-v1.0.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/debian
  • RELEASE_NOTES_LINK = '
  • MACHINE_NAME = imx6ul-var-dart
  • KERNEL_GIT = https://github.com/varigit/linux-imx.git
  • KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
  • KERNEL_IMAGE = zImage
  • KERNEL_DEFCONFIG = imx_v7_var_defconfig
  • U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
  • U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
  • U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
  • U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
  • U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
  • U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
  • SPL_SD_IMAGE_NAME = SPL-sd
  • SPL_NAND_IMAGE_NAME = SPL-nand
  • DEBIAN_GIT = https://github.com/varigit/debian-var.git
  • DEBIAN_BRANCH = debian_stretch_mx6ul_var03
  • DEBIAN_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS_STRETCH_V3_PLUS
  • DEBIAN_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
  • KERNEL_DTB_SECTION = DART-6UL_DTB_STRETCH_PLUS
  • SD_TREE_SECTION = DART-6UL_SD_TREE_STRETCH_V3_PLUS
  • EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
  • EMMC_ROOTFS_DEV = mmcblk1
  • EMMC_ROOTFS_PARTITION_NUM = p2
  • NAND_ROOTFS_DEV = mtd4
  • RAM_LOAD_ADDRESS = 0x83100000
  • UBOOT_PAD_SIZE = 0x200000
  • KERNEL_PAD_SIZE = 0x7e0000
  • KERNEL_START_ADDRESS = 0xde0000
  • DTB_START_ADDRESS = 0xde0000


buster-4.14.78-mx6ul-v1.0


  • RELEASE_NAME = buster-4.14.78-mx6ul-v1.0
  • RELEASE_LINK = RELEASE_BUSTER_V1.0_DART-6UL
  • DEBIAN_NAME = Buster
  • DEBIAN_VERSION = 10
  • RECOVERY_SD_NAME = buster-4.14.78-mx6ul-v1.0.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/debian
  • RELEASE_NOTES_LINK = '
  • MACHINE_NAME = imx6ul-var-dart
  • KERNEL_GIT = https://github.com/varigit/linux-imx.git
  • KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
  • KERNEL_IMAGE = zImage
  • KERNEL_DEFCONFIG = imx_v7_var_defconfig
  • U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
  • U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
  • U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
  • U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
  • U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
  • U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
  • SPL_SD_IMAGE_NAME = SPL-sd
  • SPL_NAND_IMAGE_NAME = SPL-nand
  • DEBIAN_GIT = https://github.com/varigit/debian-var.git
  • DEBIAN_BRANCH = debian_buster_var01
  • DEBIAN_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS_STRETCH_V3_PLUS
  • DEBIAN_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
  • KERNEL_DTB_SECTION = DART-6UL_DTB_STRETCH_PLUS
  • SD_TREE_SECTION = DART-6UL_SD_TREE_STRETCH_V3_PLUS
  • EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
  • EMMC_ROOTFS_DEV = mmcblk1
  • EMMC_ROOTFS_PARTITION_NUM = p2
  • NAND_ROOTFS_DEV = mtd4
  • RAM_LOAD_ADDRESS = 0x83100000
  • UBOOT_PAD_SIZE = 0x200000
  • KERNEL_PAD_SIZE = 0x7e0000
  • KERNEL_START_ADDRESS = 0xde0000
  • DTB_START_ADDRESS = 0xde0000

VAR-SOM-MX7

stretch-4.9.11-mx7-v1.0


stretch-4.9.88-mx7-v2.0


buster-4.14.78-mx7-v1.0


DART-MX8M

stretch-4.14.78-mx8m-v1.0


buster-4.14.78-mx8m-v2.0


buster-4.14.78-mx8m-v2.1


buster-4.14.78-mx8m-v2.2


DART-MX8M-MINI

buster-4.14.78-mx8mm-v1.0



buster-4.14.78-mx8mm-v1.1


buster-4.14.78-mx8mm-v1.2



VAR-SOM-MX8X

buster-4.14.98-imx8qxp-v1.0



buster-4.14.98-imx8qxp-v1.1


buster-4.14.98-imx8qxp-v1.2


Retrieved from "https://variwiki.com/index.php?title=Debian_Platform_Customization&oldid=11876"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 13 October 2019, at 12:46.

© 2024 Variscite. All rights reserved