Yocto Build U-Boot: Difference between revisions
From Variscite Wiki
No edit summary |
|||
| Line 44: | Line 44: | ||
The final boot image contains multiple firmware files. The following procedure builds the final image. | The final boot image contains multiple firmware files. The following procedure builds the final image. | ||
Create imx-boot-tools directory | |||
$ mkdir imx-boot-tools | $ mkdir imx-boot-tools | ||
$ cd imx-boot-tools | $ cd imx-boot-tools | ||
{{#ifeq: {{#var:SOC_FAMILY}} | imx8 | | {{#ifeq: {{#var:SOC_FAMILY}} | imx8 | | ||
Download SC firmware | |||
$ git clone {{#var:META_VARISCITE_GIT}} -b {{#var:META_VARISCITE_BRANCH}} | $ git clone {{#var:META_VARISCITE_GIT}} -b {{#var:META_VARISCITE_BRANCH}} | ||
$ cp meta-variscite-imx/recipes-bsp/imx-sc-firmware/imx-sc-firmware/{{#var:SC_FIRMWARE}} scfw_tcm.bin | $ cp meta-variscite-imx/recipes-bsp/imx-sc-firmware/imx-sc-firmware/{{#var:SC_FIRMWARE}} scfw_tcm.bin | ||
Download SECO firmware | |||
$ wget {{#var:NXP_FIRMWARE_URL}}/{{#var:NXP_FIRMWARE}}.bin | $ wget {{#var:NXP_FIRMWARE_URL}}/{{#var:NXP_FIRMWARE}}.bin | ||
$ chmod +x {{#var:NXP_FIRMWARE}}.bin | $ chmod +x {{#var:NXP_FIRMWARE}}.bin | ||
| Line 61: | Line 61: | ||
| | | | ||
<br> | <br> | ||
Download DDR and HDMI firmware | |||
$ wget {{#var:NXP_FIRMWARE_URL}}/{{#var:NXP_FIRMWARE}}.bin | $ wget {{#var:NXP_FIRMWARE_URL}}/{{#var:NXP_FIRMWARE}}.bin | ||
$ chmod +x {{#var:NXP_FIRMWARE}}.bin | $ chmod +x {{#var:NXP_FIRMWARE}}.bin | ||
| Line 71: | Line 71: | ||
{{#ifeq: {{#var:SOC_FAMILY}}|imx8| | {{#ifeq: {{#var:SOC_FAMILY}}|imx8| | ||
<br> | <br> | ||
Download and build imx_mkimage | |||
$ git clone {{#var:NXP_IMX_GIT}}/imx-mkimage -b {{#var:NXP_IMX_BRANCH}} | $ git clone {{#var:NXP_IMX_GIT}}/imx-mkimage -b {{#var:NXP_IMX_BRANCH}} | ||
$ cd imx-mkimage | $ cd imx-mkimage | ||
| Line 79: | Line 79: | ||
| | | | ||
<br> | <br> | ||
Download imx_mkimage | |||
$ git clone {{#var:NXP_IMX_GIT}}/imx-mkimage -b {{#var:NXP_IMX_BRANCH}} | $ git clone {{#var:NXP_IMX_GIT}}/imx-mkimage -b {{#var:NXP_IMX_BRANCH}} | ||
$ cp imx-mkimage/iMX8M/*.c imx-mkimage/iMX8M/*.sh {{#ifeq: {{#var:YOCTO_NAME}}|Morty||imx-mkimage/scripts/pad_image.sh}} . | $ cp imx-mkimage/iMX8M/*.c imx-mkimage/iMX8M/*.sh {{#ifeq: {{#var:YOCTO_NAME}}|Morty||imx-mkimage/scripts/pad_image.sh}} . | ||
}} | }} | ||
Download and build ATF | |||
$ git clone {{#var:NXP_IMX_GIT}}/imx-atf -b {{#var:NXP_IMX_BRANCH}} | $ git clone {{#var:NXP_IMX_GIT}}/imx-atf -b {{#var:NXP_IMX_BRANCH}} | ||
{{#ifeq: {{#var:SOC}}|imx8mm|$ git clone {{#var:META_VARISCITE_GIT}} -b {{#var:META_VARISCITE_BRANCH}}|}} | {{#ifeq: {{#var:SOC}}|imx8mm|$ git clone {{#var:META_VARISCITE_GIT}} -b {{#var:META_VARISCITE_BRANCH}}|}} | ||
| Line 95: | Line 95: | ||
$ cd .. | $ cd .. | ||
Copy u-boot binaries | |||
$ cp ../tools/mkimage mkimage_uboot | $ cp ../tools/mkimage mkimage_uboot | ||
$ cp ../u-boot.bin . | $ cp ../u-boot.bin . | ||
| Line 102: | Line 102: | ||
{{#ifeq: {{#var:SOC_FAMILY}}|imx8| | {{#ifeq: {{#var:SOC_FAMILY}}|imx8| | ||
<br> | <br> | ||
Build boot image | |||
$ make -f soc.mak clean | $ make -f soc.mak clean | ||
$ make -f soc.mak SOC={{#var:IMX_MKIMAGE_SOC}} MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh flash | $ make -f soc.mak SOC={{#var:IMX_MKIMAGE_SOC}} MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh flash | ||
| Line 108: | Line 108: | ||
| | | | ||
<br> | <br> | ||
Build boot image | |||
$ make -f soc.mak clean | $ make -f soc.mak clean | ||
$ make -f soc.mak SOC={{#var:IMX_MKIMAGE_SOC}} dtbs={{#var:DEFAULT_DTB}} MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh CC=gcc OUTIMG={{#var:U-BOOT_SD_IMAGE_NAME}} flash_evk | $ make -f soc.mak SOC={{#var:IMX_MKIMAGE_SOC}} dtbs={{#var:DEFAULT_DTB}} MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh CC=gcc OUTIMG={{#var:U-BOOT_SD_IMAGE_NAME}} flash_evk | ||
Revision as of 17:57, 20 June 2019
Yocto Build U-Boot from source code
Toolchain installation for out of Yocto builds
To install the toolchain, follow Yocto Toolchain installation.
Build U-Boot out of Yocto tree
Obtain sources:
$ git clone https://github.com/varigit/uboot-imx.git -b imx_v2015.04_4.1.15_1.1.0_ga_var03 $ cd uboot-imx
Configure compilation environment:
$ source /opt/fslc-x11/2.2.1/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi
Cleanup everything:
$ make mrproper
Select one of the following configurations:
For booting from SD card/eMMC: $ make mx6var_som_sd_defconfig For booting from NAND flash: $ make mx6var_som_nand_defconfig
Build U-Boot:
$ make -j4
Install the built U-Boot on an SD card
$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1; sync $ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69; sync (Replace /dev/sdX with the correct device)
If you want to use our recovery SD card to flash the built U-Boot to NAND flash/eMMC, then copy it to the appropriate location in the SD card:
$ sudo cp SPL /media/rootfs/opt/images/... $ sudo cp u-boot.img /media/rootfs/opt/images/...
And eject the SD card gracefully from host machine.
Note: If you manually upgrade an existing U-Boot, and you have an old environment saved, it is a good idea to reset your environment to the new default (see Environment handling commands)
Update your U-Boot out of Yocto tree
$ git pull