Android Platform Customization: Difference between revisions

From Variscite Wiki
No edit summary
Line 222: Line 222:
  /opt/images/
  /opt/images/
  ├── Android
  ├── Android
│  ├── u-boot-imx8m-var-dart.imx
  │  ├── boot-imx8m-var-dart-emmc-wifi-dcss-lvds.img
  │  ├── boot-imx8m-var-dart-emmc-wifi-dcss-lvds.img
│  ├── boot-imx8m-var-dart-emmc-wifi-dual-display.img
│  ├── boot-imx8m-var-dart-emmc-wifi-hdmi-4k.img
  │  ├── boot-imx8m-var-dart-emmc-wifi-hdmi.img
  │  ├── boot-imx8m-var-dart-emmc-wifi-hdmi.img
│  ├── boot-imx8m-var-dart-emmc-wifi-lcdif-lvds.img
  │  ├── boot-imx8m-var-dart-sd-emmc-dcss-lvds.img
  │  ├── boot-imx8m-var-dart-sd-emmc-dcss-lvds.img
│  ├── boot-imx8m-var-dart-sd-emmc-dual-display.img
│  ├── boot-imx8m-var-dart-sd-emmc-hdmi-4k.img
  │  ├── boot-imx8m-var-dart-sd-emmc-hdmi.img
  │  ├── boot-imx8m-var-dart-sd-emmc-hdmi.img
  │  ├── recovery-imx8m-var-dart-emmc-wifi-dcss-lvds.img
  │  ├── boot-imx8m-var-dart-sd-emmc-lcdif-lvds.img
  │  ├── recovery-imx8m-var-dart-emmc-wifi-hdmi.img
  │  ├── system_raw.img
  │  ├── recovery-imx8m-var-dart-sd-emmc-dcss-lvds.img
  │  ├── u-boot-imx8m-var-dart.imx
│  ├── recovery-imx8m-var-dart-sd-emmc-hdmi.img
  │  ├── vbmeta-imx8m-var-dart-emmc-wifi-dcss-lvds.img
  │  ├── vbmeta-imx8m-var-dart-emmc-wifi-dcss-lvds.img
│  ├── vbmeta-imx8m-var-dart-emmc-wifi-dual-display.img
│  ├── vbmeta-imx8m-var-dart-emmc-wifi-hdmi-4k.img
  │  ├── vbmeta-imx8m-var-dart-emmc-wifi-hdmi.img
  │  ├── vbmeta-imx8m-var-dart-emmc-wifi-hdmi.img
│  ├── vbmeta-imx8m-var-dart-emmc-wifi-lcdif-lvds.img
  │  ├── vbmeta-imx8m-var-dart-sd-emmc-dcss-lvds.img
  │  ├── vbmeta-imx8m-var-dart-sd-emmc-dcss-lvds.img
│  ├── vbmeta-imx8m-var-dart-sd-emmc-dual-display.img
│  ├── vbmeta-imx8m-var-dart-sd-emmc-hdmi-4k.img
  │  ├── vbmeta-imx8m-var-dart-sd-emmc-hdmi.img
  │  ├── vbmeta-imx8m-var-dart-sd-emmc-hdmi.img
  │  ├── system_raw.img
  │  ├── vbmeta-imx8m-var-dart-sd-emmc-lcdif-lvds.img
  │  └── vendor_raw.img
  │  └── vendor_raw.img
  └── Yocto
  └── Yocto
    ├── imx8m-var-dart-emmc-wifi-dcss-lvds.dtb
    ├── imx8m-var-dart-emmc-wifi-hdmi.dtb
    ├── imx8m-var-dart-sd-emmc-dcss-lvds.dtb
    ├── imx8m-var-dart-sd-emmc-hdmi.dtb
     ├── rootfs.tar.bz2
     ├── rootfs.tar.bz2
     ├── u-boot-imx8m-var-dart.imx
     └── imx-boot-sd.bin
    └── zImage
<section end=DART-MX8M_SD_TREE/>
<section end=DART-MX8M_SD_TREE/>



Revision as of 14:53, 27 February 2019

VAR-SOM-MX6

Supported hardware and features

Feature
Description
SOM support
VAR-SOM-MX6 V2
VAR-SOM-SOLO
VAR-SOM-DUAL
DART-MX6
Carrier Board support
VAR-MX6CustomBoard
VAR-SOLOCustomBoard
VAR-DVK-DT6
CPU

i.MX6 Quad Plus
i.MX6 Quad
i.MX6 Dual
i.MX6 Dual lite
i.MX6 Solo

NAND flash size support
128MB and up
eMMC
up to 64GB
DDR size support configuration
Solo:up to 1GB. DualLite, Dual, Quad: up to 4GB
SD card
+
Wired Network
10/100/1000 Mbps Ethernet
Wireless Network
Support for Wilink8, 802.11abgn STA, AP, & Wi-Fi Direct Mode SmartConfig Wilink8 page
Bluetooth
+
SPI
+
I2C
+
Canbus
+
USB host
+
USB OTG
Host and Device
Uarts
x3, up to 3.6 Mbps.
RTC
+
Display HDMI: 720P,1080P
LVDS0 (On board LVDS-to-RGB bridge, 800x480 resolution), LVDS1 external display
Audio Line IN/ Line out and Audio over HDMI
Camera ov5640 camera sensor. CB402 board can be ordered separately at : sales@variscite.com
PCIE +
SATA +


SD card image file tree

/opt/images/
├── Android
│   ├── SPL-mmc
│   ├── SPL-nand
│   ├── boot-imx6q-var-dart.img
│   ├── boot-som-mx6dl-c.img
│   ├── boot-som-mx6dl-r.img
│   ├── boot-som-mx6q-c.img
│   ├── boot-som-mx6q-r.img
│   ├── boot-som-mx6q-vsc.img
│   ├── boot-som-solo-c.img
│   ├── boot-som-solo-r.img
│   ├── boot-som-solo-vsc.img
│   ├── boot-som-solo-vsc.img
│   ├── recovery-imx6q-var-dart.img
│   ├── recovery-som-mx6dl-c.img
│   ├── recovery-som-mx6dl-r.img
│   ├── recovery-som-mx6q-c.img
│   ├── recovery-som-mx6q-r.img
│   ├── recovery-som-mx6q-vsc.img
│   ├── recovery-som-solo-c.img
│   ├── recovery-som-solo-r.img
│   ├── recovery-som-solo-vsc.img
│   ├── system.img
│   ├── u-boot-var-imx6-mmc.img
│   └── u-boot-var-imx6-nand.img
└── Yocto
    ├── SPL-nand
    ├── SPL-sd
    ├── imx6dl-var-som-cap.dtb
    ├── imx6dl-var-som-res.dtb
    ├── imx6dl-var-som-solo-cap.dtb
    ├── imx6dl-var-som-solo-res.dtb
    ├── imx6dl-var-som-solo-vsc.dtb
    ├── imx6dl-var-som-vsc.dtb
    ├── imx6q-var-dart.dtb
    ├── imx6q-var-som-cap.dtb
    ├── imx6q-var-som-res.dtb
    ├── imx6q-var-som-vsc.dtb
    ├── rootfs.tar.bz2
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── uImage


Flash Recovery SD from GUI

VAR-SOM-MX6 Android Recovery.png

Click on the appropriate icon:

  • Install Android SOLOCustomBoard: Install Android on eMMC, on VAR-SOLOCustomBoard
  • Install Android MX6CB Cap: Install Android with Capacitive touch panel support on eMMC, on VAR-MX6CustomBoard
  • Install Android MX6CB Res: Install Android with Resistive touch panel support on eMMC, on VAR-MX6CustomBoard
  • Install Android DART: Install Android on eMMC, on VAR-DT6CustomBoard


  • Install Yocto SOLOCB NAND: Install Yocto on NAND flash, on VAR-SOLOCustomBoard
  • Install Yocto SOLOCB eMMC: Install Yocto on eMMC, on VAR-SOLOCustomBoard
  • Install Yocto MX6CB Res NAND: Install Yocto with Resistive touch panel support on NAND flash, on VAR-MX6CustomBoard
  • Install Yocto MX6CB Cap NAND: Install Yocto with Capacitive touch panel support on NAND flash, on VAR-MX6CustomBoard
  • Install Yocto MX6CB Res eMMC: Install Yocto with Resistive touch panel support on eMMC, on VAR-MX6CustomBoard
  • Install Yocto MX6CB Cap eMMC: Install Yocto with Capacitive touch panel support on eMMC, on VAR-MX6CustomBoard.
  • Install Yocto DART (eMMC): Install Yocto on eMMC, on VAR-DT6CustomBoard

DART-MX8M

Supported hardware and features

Feature
Description
SOM support
DART-MX8M
Carrier Board support
VAR-DT8MCustomBoard
CPU

i.MX8M

eMMC
up to 64GB
DDR size support configuration
up to 4GB
SD card
+
Wired Network
10/100/1000 Mbps Ethernet
Wireless Network
Support for LWB5, 802.11 ac/a/b/g/n STA, AP, & Wi-Fi Direct Mode SmartConfig
Bluetooth
4.2 / BLE
SPI
+
I2C
+
USB host
+
USB OTG
Host and Device
Uarts
x4, up to 4 Mbps.
RTC
+
Display HDMI: V2.0a up to 4Kp60
LVDS Dual 1920×1080 24-bit
MIPI-DSI 1920×1080 24-bit
Audio Line IN / HP
Camera 2x MIPI-CSI2
PCIE +


SD card image file tree

/opt/images/
├── Android
│   ├── boot-imx8m-var-dart-emmc-wifi-dcss-lvds.img
│   ├── boot-imx8m-var-dart-emmc-wifi-dual-display.img
│   ├── boot-imx8m-var-dart-emmc-wifi-hdmi-4k.img
│   ├── boot-imx8m-var-dart-emmc-wifi-hdmi.img
│   ├── boot-imx8m-var-dart-emmc-wifi-lcdif-lvds.img
│   ├── boot-imx8m-var-dart-sd-emmc-dcss-lvds.img
│   ├── boot-imx8m-var-dart-sd-emmc-dual-display.img
│   ├── boot-imx8m-var-dart-sd-emmc-hdmi-4k.img
│   ├── boot-imx8m-var-dart-sd-emmc-hdmi.img
│   ├── boot-imx8m-var-dart-sd-emmc-lcdif-lvds.img
│   ├── system_raw.img
│   ├── u-boot-imx8m-var-dart.imx
│   ├── vbmeta-imx8m-var-dart-emmc-wifi-dcss-lvds.img
│   ├── vbmeta-imx8m-var-dart-emmc-wifi-dual-display.img
│   ├── vbmeta-imx8m-var-dart-emmc-wifi-hdmi-4k.img
│   ├── vbmeta-imx8m-var-dart-emmc-wifi-hdmi.img
│   ├── vbmeta-imx8m-var-dart-emmc-wifi-lcdif-lvds.img
│   ├── vbmeta-imx8m-var-dart-sd-emmc-dcss-lvds.img
│   ├── vbmeta-imx8m-var-dart-sd-emmc-dual-display.img
│   ├── vbmeta-imx8m-var-dart-sd-emmc-hdmi-4k.img
│   ├── vbmeta-imx8m-var-dart-sd-emmc-hdmi.img
│   ├── vbmeta-imx8m-var-dart-sd-emmc-lcdif-lvds.img
│   └── vendor_raw.img
└── Yocto
    ├── rootfs.tar.bz2
    └── imx-boot-sd.bin


Flash Recovery SD from GUI

Currently no GUI is available for flashing, use command line.

Platform Customizations

VAR-SOM-MX6



DART-MX8M

RELEASE_O8.1.0_1.3.0_8M_DART-MX8M


  • RELEASE_NAME = morty-imx-4.9.51-v1.0
  • RELEASE_LINK = RELEASE_O8.1.0_1.3.0_8M_DART-MX8M
  • ANDROID_NAME = Oreo
  • ANDROID_VERSION = O8.1.0_r14
  • NXP_BSP_VERSION = imx_8.1.0_1.3.0_8m_ANDROID
  • RECOVERY_SD_NAME = dart-mx8m-recovery-sd.v14.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/
  • RELEASE_NOTES_LINK = TBD
  • MACHINE_NAME = imx8m-var-dart
  • KERNEL_GIT = https://github.com/varigit/linux-imx
  • KERNEL_BRANCH = o8.1.0_1.3.0_8m-ga_var01
  • KERNEL_IMAGE = zImage
  • KERNEL_DEFCONFIG = imx8m_var_dart_android_defconfig
  • U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
  • U-BOOT_BRANCH = imx_v2017.03_4.9.51_imx8m_ga_var01
  • U-BOOT_SD_DEFCONFIG = imx8m_var_dart_config
  • U-BOOT_SD_IMAGE_NAME = u-boot-imx8m-var-dart.imx
  • YOCTO_BUILD_RESULTS_SECTION = DART-MX8M_BUILD_RESULTS
  • YOCTO_BOOT_BOARD_SECTION = DART-MX8M_BOOT_BOARD
  • KERNEL_DTB_SECTION = DART-MX8M_DTB
  • SD_TREE_SECTION = DART-MX8M_SD_TREE
  • EMMC_ROOTFS_DEV = mmcblk0
  • EMMC_ROOTFS_PARTITION_NUM = p0
  • UBOOT_CONFIG_FILE = include/configs/imx8m_var_dart.h


RELEASE_P9.0.0_1.0.0_GA_DART-MX8M


  • RELEASE_NAME = morty-imx-4.9.51-v1.0
  • RELEASE_LINK = RELEASE_P9.0.0_1.0.0_GA_DART-MX8M
  • ANDROID_NAME = Pie
  • ANDROID_VERSION = P9.0.0_r01
  • NXP_BSP_VERSION = imx_9.0.0_1.0.0_ga_ANDROID
  • RECOVERY_SD_NAME = dart-mx8m-recovery-sd.v20.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/
  • RELEASE_NOTES_LINK = TBD
  • MACHINE_NAME = imx8m-var-dart
  • KERNEL_GIT = https://github.com/varigit/linux-imx
  • KERNEL_BRANCH = p9.0.0_1.0.0-ga_var01
  • KERNEL_IMAGE = zImage
  • KERNEL_DEFCONFIG = imx8m_var_dart_android_defconfig
  • U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
  • U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
  • U-BOOT_SD_DEFCONFIG = imx8m_var_dart_config
  • U-BOOT_SD_IMAGE_NAME = u-boot-imx8m-var-dart.imx
  • YOCTO_BUILD_RESULTS_SECTION = DART-MX8M_BUILD_RESULTS
  • YOCTO_BOOT_BOARD_SECTION = DART-MX8M_BOOT_BOARD
  • KERNEL_DTB_SECTION = DART-MX8M_DTB
  • SD_TREE_SECTION = DART-MX8M_SD_TREE
  • EMMC_ROOTFS_DEV = mmcblk0
  • EMMC_ROOTFS_PARTITION_NUM = p0
  • UBOOT_CONFIG_FILE = include/configs/imx8m_var_dart.h