Yocto Setup TFTP/NFS: Difference between revisions
From Variscite Wiki
(→Target) |
No edit summary |
||
Line 41: | Line 41: | ||
$ sudo /etc/init.d/xinetd restart | $ sudo /etc/init.d/xinetd restart | ||
$ cd {{#var:BUILD_FOLDER}}/{{#var:BUILD_FOLDER_X11}}/ | $ cd {{#var:BUILD_FOLDER}}/{{#var:BUILD_FOLDER_X11}}/ | ||
$ cp tmp/deploy/images/{{#var:MACHINE_NAME}}/{{#var: | $ cp tmp/deploy/images/{{#var:MACHINE_NAME}}/{{#var:KERNEL_IMAGE}} /tftpboot | ||
$ sudo rename 's/{{#var: | $ sudo rename 's/{{#var:KERNEL_IMAGE}}-//' /tftpboot/{{#var:KERNEL_IMAGE}}-*.dtb | ||
== Target == | == Target == |
Revision as of 17:11, 8 May 2017
- Yocto Setup TFTP/NFS
Running Yocto rootfs on Variscite board using TFTP & NFS
Host
Make sure you installed NFS server:
$ sudo apt-get install nfs-kernel-server $ cd $ sudo mkdir rootfs $ cd rootfs $ sudo tar xvf ../build_x11/tmp/deploy/images//fsl-image-qt5-.tar.bz2
$ sudo gedit /etc/exports
add (change <uname> to the name of user):
/rootfs *(rw,sync,no_root_squash,no_all_squash,no_subtree_check)
exit & save
$ sudo /etc/init.d/nfs-kernel-server restart
Make sure you installed TFTP server:
$ sudo apt-get install xinetd tftpd tftp Verify: $ ls /usr/sbin/in.tftpd $ sudo gedit /etc/xinetd.d/tftp service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = /tftpboot disable = no }
$ sudo mkdir /tftpboot $ sudo chmod -R 777 /tftpboot $ sudo /etc/init.d/xinetd restart $ cd // $ cp tmp/deploy/images// /tftpboot $ sudo rename 's/-//' /tftpboot/-*.dtb
Target
Make sure you have a serial connection to the target.
Reset and hold the space bar. This will bring you to U-Boot command line.
$ setenv serverip 192.168.1.188 $ setenv nfsroot /rootfs (change <uname> to the name of user) $ setenv bootcmd run netboot $ saveenv
You are all set. Pushing reset on the board will run your Yocto result file system.