Yocto Platform Customization: Difference between revisions

Revision as of 14:02, 3 May 2017

Yocto Morty

TOOLCHAIN_X11_INSTALL_NAME='
TOOLCHAIN_LOCATION=/opt/fsl-imx-x11/4.1.15-2.0.1/environment-setup-cortexa7hf-neon-poky-linux-gnueabi
BUILD_FOLDER=~/var-fslc-yocto
BUILD_DISTRO=fslc-x11
BUILD_SCRIPT=. setup-environment
BUILD_FOLDER_X11=build_x11
KERNEL_BRANCH=imx-rel_imx_4.1.15_2.0.0_ga-var01

Platform DART-6UL

MACHINE_NAME=imx6ul-var-dart
HARDWARE_NAME=DART-6UL
KERNEL_DEFCONFIG=imx6ul-var-dart_defconfig
KERNEL_IMAGE=zImage
RECOVERY_SD_NAME=morty-fslc-4.1.15-mx6ul-v1.0-beta.img.gz
RECOVERY_SD_URL=ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc

Device tree

Build only the device tree for DART-6UL with eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL with NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb

Build only the device tree for DART-6ULL with eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6ULL with eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb

Build only the device tree for DART-6ULL with NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb

Build only the device tree for DART-6ULL with NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb

@@ Line 35: / Line 35: @@
   MACHINE_NAME='''{{#var:MACHINE_NAME}}'''
   HARDWARE_NAME='''{{#var:HARDWARE_NAME}}'''
-  MACHINE_KERNEL_DEFCONFIG='''{{#var:KERNEL_DEFCONFIG}}'''
+  KERNEL_DEFCONFIG='''{{#var:KERNEL_DEFCONFIG}}'''
   KERNEL_IMAGE='''{{#var:KERNEL_IMAGE}}'''
+ RECOVERY_SD_NAME='''{{#var:RECOVERY_SD_NAME}}'''
+ RECOVERY_SD_URL='''{{#var:RECOVERY_SD_URL}}'''
 === Device tree ===
 <onlyinclude>{{#ifeq:{{{transcludesection|DART-6UL_DTB}}}|DART-6UL_DTB|