DART-6UL Yocto Flash From Net: Difference between revisions
From Variscite Wiki
(Created page with "{{PageHeader|Flash From Network Yocto system}} {{DocImage|category1=VAR-SOM-MX6|category2=Yocto}} __toc__ = Flashing a complete Yocto system from Network using tftp & nfs ...") |
|||
| Line 19: | Line 19: | ||
Create a root file system and copy files | Create a root file system and copy files | ||
<pre>$ mkdir ~/flash_rootfs | <pre>$ mkdir ~/flash_rootfs | ||
$ sudo | Linux: | ||
$ sudo cp tmp/deploy/images/ | $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage /tftpboot | ||
$ sudo cp tmp/deploy/images/ | Device Tree: | ||
$ sudo cp tmp/deploy/images/ | $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-emmc_wifi.dtb /tftpboot/imx6ul-var-dart-emmc_wifi.dtb | ||
$ sudo cp tmp/deploy/images/ | $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-nand_wifi.dtb /tftpboot/imx6ul-var-dart-nand_wifi.dtb | ||
$ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-sd_emmc.dtb /tftpboot/imx6ul-var-dart-sd_emmc.dtb | |||
$ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-sd_nand.dtb /tftpboot/imx6ul-var-dart-sd_nand.dtb | |||
</pre> | </pre> | ||
Insert nand-recovery into your host and copy files | Insert nand-recovery into your host and copy files | ||
<pre> | <pre>$ sudo cp -a /media/rootfs/opt/images ~/flash_rootfs/opt/ | ||
$ sudo cp -a /media/rootfs/opt/images ~/flash_rootfs/opt/ | $ sudo cp /media/rootfs/sbin/*.sh ~/flash_rootfs/sbin/ | ||
$ sudo cp /media/rootfs/sbin/ | |||
</pre> | </pre> | ||
Boot into u-boot and change environment variables | Boot into u-boot and change environment variables | ||
Revision as of 14:33, 28 December 2015
Flash From Network Yocto system
Flashing a complete Yocto system from Network using tftp & nfs
NOTES:
- Please make sure your host system is ready to use TFTP/NFS. Use our WIKI if required. TFTP & NFS
- Mix and match the nand-recovery version with the system you would like to flash.
- This is a concept WIKI. Please adopt it to your system and your requirements.
- Android can be flashed in the same way.
Build mininal file system
$ gedit ../sources/poky/meta/recipes-core/images/core-image-minimal-mtdutils.bb
Set the image to include:
IMAGE_INSTALL += "mtd-utils imx-kobs mtd-utils-ubifs"
Build the system:
$ bitbake core-image-minimal-mtdutils
Create a root file system and copy files
$ mkdir ~/flash_rootfs Linux: $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage /tftpboot Device Tree: $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-emmc_wifi.dtb /tftpboot/imx6ul-var-dart-emmc_wifi.dtb $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-nand_wifi.dtb /tftpboot/imx6ul-var-dart-nand_wifi.dtb $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-sd_emmc.dtb /tftpboot/imx6ul-var-dart-sd_emmc.dtb $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-sd_nand.dtb /tftpboot/imx6ul-var-dart-sd_nand.dtb
Insert nand-recovery into your host and copy files
$ sudo cp -a /media/rootfs/opt/images ~/flash_rootfs/opt/ $ sudo cp /media/rootfs/sbin/*.sh ~/flash_rootfs/sbin/
Boot into u-boot and change environment variables
$ setenv serverip <your host ip address> $ setenv bootfile uImage $ setenv nfsroot /ws/ron/yocto-dora-fsl-beta/rootfs_min $ setenv console ttymxc0 $ setenv bootcmd 'run netboot' $ boot
On the target flash your system:
$ nand-recovery.sh
a complete system is flashed into nand. Once the file system is built you can use it again and again to flash your VAR-SOM-MX6. You can update the images to use your images or custom nand-recovery.sh to your requirements.