Revision as of 11:53, 15 December 2015

VAR-SOM-MX6 - First Time? Start Here

     Under Construction!!!
        Under Construction!!!
           Under Construction!!!

Step One: Read Documentations

Please download and read the development kit documentation.

NOTE:
Make sure you read the Quick Start Guide.

Set up your development environment.

Power up the board.
You should have the serial cable connected.
You should also see the u-boot output on the serial.

IMPORTANT:
Don't continue without the serial console operating.

Create Yocto bootable SDCARD and flash it to your card.

NAND recovery
- Insert the SD card into the SD/MMC slot of the custom board
- Press and hold the boot-select button, power-off and power-on the board
- The board will automatically boot into Linux from SD-Card

@@ Line 20: / Line 20: @@
 </br>You should also see the u-boot output on the serial.
 {{note| IMPORTANT:<br>Don't continue without the serial console operating.|info}}
-= Step Four: Create NAND recovery SDCARD=
+= Step Four: NAND recovery SDCARD=
-Create Yocto bootable SDCARD.
+Create Yocto bootable SDCARD and flash it to your card.
 * [[VAR-SOM-MX6 Yocto NAND Recovery|NAND recovery]]
+** Insert the SD card into the SD/MMC slot of the custom board
+** Press and hold the boot-select button, power-off and power-on the board
+** The board will automatically boot into Linux from SD-Card
 = Step Five: =