Yocto Development Environment: Difference between revisions
From Variscite Wiki
| Line 38: | Line 38: | ||
We created a Virtual machine with all packages installed. We also installed Yocto Fido R2 on it. | We created a Virtual machine with all packages installed. We also installed Yocto Fido R2 on it. | ||
Please download it from the FTP site and add it to your VMWare. | Please download it from the FTP site and add it to your VMWare. | ||
Username: variscite | </br>Username: variscite | ||
Password: variscite | Password: variscite | ||
You can skip to the section: [[VAR-SOM-MX6 Yocto Fido R2 Build Yocto_release#Setup_and_build_Yocto_QT5.2FX|Build Yocto release]] | You can skip to the section: [[VAR-SOM-MX6 Yocto Fido R2 Build Yocto_release#Setup_and_build_Yocto_QT5.2FX|Build Yocto release]] | ||
Revision as of 10:51, 13 December 2015
VAR-SOM-MX6 - Setting Development Environment
Introduction
Installing Ubuntu 14.04 in VMWare Player
There are many examples on the WEB. we Recommend:
Installation recommendations
- Set the number of CPU's to maximum possible
- Set the memory size to at least 4GB.
- Set the disk size to be at least 200GB. 300GB is better.
- Use Bridge for networking.
- Install the VMWare tools.
- If you have an extra hard drive use it as a physical partition and set you home directory to it.
- Update Ubuntu right after first login.
Installing additional packages for Ubuntu 14.04
First time you login into Ubuntu Install additional pacakages
Yocto essentials pacakages: $ sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib build-essential chrpath socat libsdl1.2-dev xterm Yocto Documentation: $ sudo apt-get install make xsltproc docbook-utils fop dblatex xmlto ADT Installer Extras: $ sudo apt-get install autoconf automake libtool libglib2.0-dev libarchive-dev Additional : $ sudo apt-get install bison flex patch libncurses-dev $ sudo apt-get install gettext texinfo curl subversion $ sudo apt-get install minicom wireshark $ sudo apt-get install ssh vde2 nfs-kernel-server debootstrap uml-utilities $ sudo apt-get install bridge-utils dnsmasq xinetd tftpd tftp $ sudo apt-get install u-boot-tools
Pre Built Ubuntu 14.04 VMWare virtual machine
We created a Virtual machine with all packages installed. We also installed Yocto Fido R2 on it.
Please download it from the FTP site and add it to your VMWare.
Username: variscite
Password: variscite
You can skip to the section: Build Yocto release