VAR-SOM-MX6 Yocto NAND Recovery

Variscite provides a recovery SD-card image that can be used to install the pre-built U-Boot, Linux kernel and the UBI file system into the Nand-Flash This SD card image includes a script (nand-recovery.sh) that installs all the boot images and root file-system.

Preparing rescue SD-Card:

• Plug-in the supplied SD card to your Linux machine, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblk0)
• Download mx6-som-nand-recovery-sd.vXX.img.gz ( latest which is available on Variscite's FTP)

$ gunzip mx6-som-nand-recovery-sd.XX.img.gz
$ sudo dd if=mx6-som-nand-recovery-sd.vXX.img of=/dev/sdX bs=128k
Replace /dev/sdX with your true device, You can find it with dmesg.

Recover Nand Flash:

• Insert the SD card into the SD/MMC slot of the custom board
• Press and hold the boot-select button, power-off and power-on the board
• The board will automatically boot into Linux from SD-Card

Flash from GUI

• Press the right arrow on the upper right corner to change the desktop into Utilities.

• Push Android-eMMC flash Android into eMMC.
• Push Yocto-nand flash Yocto into nand.
• Push Yocto-eMMC flash Yocto into eMMC. This option require changes in u-boot environment.

Flash from command line

• Login as root (no password)
• From Linux command line, type: "nand-recovery.sh" (This will install Yocto/Linux on the NAND)
• Flash options

$ android-emmc.sh - flash Android into eMMC
$ yocto-emmc.sh - flash Yocto into eMMC
$ yocto-nand.sh - flash Yocto into nand

• in case of yocto-emmc.sh:
  

change boot arguments to : setenv bootargs console=ttymxc0,115200 video=mxcfb1:off root=/dev/mmcblk1p1 rootwait rw