VAR-SOM-MX6 Yocto Flash From Net: Difference between revisions
From Variscite Wiki
No edit summary |
(→Host) |
||
Line 4: | Line 4: | ||
= Flashing a complete Yocto system from Network using tftp & nfs = | = Flashing a complete Yocto system from Network using tftp & nfs = | ||
== | == Build mininal file system== | ||
<pre>$ gedit ../sources/poky/meta/recipes-core/images/core-image-minimal-mtdutils.bb | |||
<pre>$ | </pre> | ||
Set the image to include: | |||
IMAGE_INSTALL += "mtd-utils imx-kobs mtd-utils-ubifs" | |||
Build the system: | |||
<pre>$ | |||
</pre> | |||
== Target == | == Target == | ||
Revision as of 10:03, 18 December 2014
Flash From Network Yocto system
Flashing a complete Yocto system from Network using tftp & nfs
Build mininal file system
$ gedit ../sources/poky/meta/recipes-core/images/core-image-minimal-mtdutils.bb
Set the image to include: IMAGE_INSTALL += "mtd-utils imx-kobs mtd-utils-ubifs" Build the system:
$
Target
make sure you have a serial connection to the target.
reset and hold the space bar. This will brink you to u-boot prompt
$ setenv serverip 192.168.1.188 $ setenv ethaddr a8:cc:3d:d9:b8:f5 $ setenv kernel uImage $ setenv nfsroot /home/<uname>/fsl-community-bsp/rootfs $ setenv bootcmd run bootcmd_net $ saveenv
You are all set. Pushing reset on the VAR-SOM-MX6 board will run your Yocto result file system.