Linux CAN bus: Difference between revisions
From Variscite Wiki
m (Nate moved page IMX CAN bus to Linux CAN bus) |
(Enable note for old MX8M-MINI/-NANO revisions for Debian) |
||
Line 25: | Line 25: | ||
{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M-PLUS | | {{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M-PLUS | | ||
'''Note''': For DART-MX8M-PLUS SoMs, the reference interface is can2 instead of can0. | '''Note''': For DART-MX8M-PLUS SoMs, the reference interface is can2 instead of can0. | ||
|}} | |}}<!-- | ||
Define and zero the OS version variable if needed to avoid an expression error. | |||
{{#ifexpr: {{#var:YOCTO_VERSION}} > 3.0 | | -->{{#varexists:YOCTO_VERSION||{{#vardefine:YOCTO_VERSION|0}}}}<!-- | ||
-->{{#varexists:DEBIAN_VERSION||{{#vardefine:DEBIAN_VERSION|0}}}}<!-- | |||
-->{{#ifexpr: {{#var:YOCTO_VERSION}} > 3.0 or {{#var:DEBIAN_VERSION}} >= 11| | |||
{{#switch: {{#var:HARDWARE_NAME}} | {{#switch: {{#var:HARDWARE_NAME}} | ||
| DART-MX8M-MINI | | DART-MX8M-MINI |
Revision as of 21:03, 27 April 2023
Warning: This page is designed to be used with a 'release' URL parameter.
This page is using the default release RELEASE_DUNFELL_V1.0_VAR-SOM-MX6.
To view this page for a specific Variscite SoM and software release, please follow these steps:
- Visit variwiki.com
- Select your SoM
- Select the software release
CAN bus
Connect two boards like the following:
Board A Board B CAN_H --- CAN_H CAN_L --- CAN_L GND ----- GND
Set up the boards by running the following on each of them:
# ip link set can0 up type can bitrate 125000
Then:
On board A:
# candump can0
On board B:
# cansend can0 500#1E.10.10