B2QT Platform Customization: Difference between revisions

From Variscite Wiki
(mx8x-b2qt-hardknott-5.10.72_2.2.1-v1.0)
(add mx8-b2qt-hardknott-5.10.72_2.2.1-v1.0)
Line 1,187: Line 1,187:
-->{{#lst:B2QT_VAR-SOM-MX8|mx8-b2qt-dunfell-5.4-2.1.x-v1.2}} <!--        Include the minor release variables
-->{{#lst:B2QT_VAR-SOM-MX8|mx8-b2qt-dunfell-5.4-2.1.x-v1.2}} <!--        Include the minor release variables
--><section end=mx8-b2qt-dunfell-5.4-2.1.x-v1.2/>
--><section end=mx8-b2qt-dunfell-5.4-2.1.x-v1.2/>
<section begin=mx8-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Yocto major release
-->{{#lst:B2QT_VAR-SOM-MX8|mx8-b2qt-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the B2QT major release
--><section end=mx8-b2qt-hardknott-5.10.72_2.2.1-v1.0/>
</includeonly>
</includeonly>


Revision as of 18:58, 12 September 2022

Release Notes

Based on release B2Qt , Poky , BSP: NXP , Linux: [ ]
Release git [/tree/ ]
Release tag [/tree/ ]
Release Branch [/tree/ ]
Date
Supported platforms
SOM revision
Embedded Linux Distribution B2Qt Community BSP based
B2Qt Community BSP link [ ]
Qt version
Kernel git [/tree/ ]
Kernel branch [/tree/ ]
U-Boot git [/tree/ ]
U-Boot branch [/tree/ ]
File System build system B2Qt
Recovery SD card link [/ ]

</includeonly>

B2QT Platform Customizations

VAR-SOM-MX6

morty-b2qt-4.1.15-mx6-v1.0

thud-b2qt-4.14.78-mx6-v1.0

DART-6UL

morty-b2qt-4.1.15-mx6ul-v1.0

  • RELEASE_NAME = morty-b2qt-4.1.15-mx6ul-v1.0
  • RELEASE_LINK = RELEASE_MORTY_B2QT_V1.0_DART-6UL
  • YOCTO_NAME = Morty
  • YOCTO_VERSION = 2.2.1
  • B2QT_BSP_VERSION = 5.9
  • FSL_BSP_VERSION = L4.1.15_2.0.0-ga
  • RECOVERY_SD_NAME = morty-b2qt-4.1.15-mx6ul-v1.0.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/b2qt
  • RELEASE_NOTES_LINK = TBD
  • MACHINE_NAME = imx6ul-var-dart
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • YOCTO_BRANCH = morty
  • B2QT_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
  • B2QT_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
  • KERNEL_DTB_SECTION = DART-6UL_DTB
  • SD_TREE_SECTION = DART-6UL_SD_TREE
  • QT_PLATFORM_PLUGIN = eglfs

morty-b2qt-4.1.15-mx6ul-v1.1

thud-b2qt-4.14.78-mx6ul-v1.0

zeus-b2qt-5.4.3-mx6ul-v1.0

zeus-b2qt-5.4.3-mx6ul-v1.1

zeus-b2qt-5.4.3-mx6ul-v1.2

VAR-SOM-MX7

morty-b2qt-4.1.15-mx7-v1.0

thud-b2qt-4.14.78-mx7-v1.0

dunfell-b2qt-5.4.85-mx7-v1.0

mx7-b2qt-dunfell-5.4-2.1.x-v1.1

DART-MX8M

b2qt-sumo-dart-mx8m-v1.0

b2qt-sumo-dart-mx8m-v1.1

dunfell-b2qt-5.4-2.1.x-mx8m-v1.0

dunfell-b2qt-5.4-2.1.x-mx8m-v1.1

dunfell-b2qt-5.4-2.1.x-mx8m-v1.2

mx8m-b2qt-dunfell-5.4-2.1.x-v1.3

mx8m-b2qt-hardknott-5.10.72_2.2.1-v1.0

mx8m-b2qt-kirkstone-5.15-2.0.x-v1.0

mx8m-b2qt-kirkstone-5.15-2.0.x-v1.1


RN_mx8m-b2qt-hardknott-5.10.72_2.2.1-v1.0

|- | Release 1.0 || |- | Initial B2Qt Hardknott release ||


RN_mx8m-b2qt-kirkstone-5.15-2.0.x-v1.0

|- | Release 1.0 || |- | Initial B2Qt Kirkstone release ||


RN_mx8m-b2qt-kirkstone-5.15-2.0.x-v1.1

|- | Release 1.1 || |- | U-Boot updates || |- | lpddr4_timing: Align to RPA v33 + DDR Tool v3.31 || |-



DART-MX8M-MINI

dart-mx8mm-b2qt-v1.0

dart-mx8mm-b2qt-v1.1

dart-mx8mm-b2qt-v1.2

  • B2QT_BSP_VERSION = 5.12
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • B2QT_BRANCH = sumo-var01
  • BUILD_FOLDER = ~/var-b2qt
  • BUILD_FOLDER_B2QT = build-imx8mm-var-dart
  • BUILD_SCRIPT = . setup-environment.sh
  • DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt5-image
  • EMMC_ROOTFS_DEV = mmcblk2
  • EMMC_ROOTFS_PARTITION_NUM = p1
  • FSL_BSP_VERSION = L4.14.98-2.0.0_ga
  • HARDWARE_NAME = DART-MX8M-MINI
  • MACHINE_NAME = imx8mm-var-dart
  • META_VARISCITE_REPO = meta-variscite-imx
  • META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-imx
  • META_VARISCITE_BRANCH = sumo-imx-4.14.98-var01
  • RELEASE_NAME = b2qt-sumo-dart-mx8mm-v12
  • RELEASE_LINK = RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI
  • RECOVERY_SD_NAME = b2qt-sumo-dart-mx8mm-v12.img.gz
  • RECOVERY_SD_URL = https://variscite-public.nyc3.cdn.digitaloceanspaces.com/DART-MX8M-MINI/Software/b2qt
  • RELEASE_TAG = b2qt_sumo_dart-mx8mm_v12
  • IMX_ATF_PLAT = imx8mm
  • IMX_MKIMAGE_SOC = iMX8MM
  • NXP_IMX_GIT = https://github.com/nxp-imx
  • NXP_IMX_BRANCH = imx_4.14.98_2.0.0_ga
  • NXP_KERNEL_BRANCH = imx_4.14.98_2.0.0_ga
  • NXP_KERNEL_GIT = https://github.com/nxp-imx/linux-imx
  • NXP_FIRMWARE = firmware-imx-8.1.1
  • NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
  • SUPPORTED_REV_SOM = v1.1 and higher
  • SUPPORTED_REV_CARRIER = v1.1 and higher
  • B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
  • QT_VERSION = 5.12.9 RC
  • KERNEL_GIT = https://github.com/varigit/linux-imx
  • KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
  • KERNEL_DEFCONFIG = imx8_var_defconfig
  • KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
  • KERNEL_IMAGE = Image.gz
  • U-BOOT_GIT = https://github.com/varigit/uboot-imx
  • U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
  • U-BOOT_BOARD_NAME = imx8mm_var_dart
  • U-BOOT_DTB_DART = fsl-imx8mm-var-dart.dtb
  • U-BOOT_DTB_SOM = fsl-imx8mm-var-som.dtb
  • U-BOOT_DTB_SOM_10 = fsl-imx8mm-var-som-rev10.dtb
  • U-BOOT_OFFSET = 33
  • U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
  • U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
  • U-BOOT_EMMC_DEV = 1
  • U-BOOT_SD_DEV = 0
  • U-BOOT_UMS_DEV = 0
  • SDCARD_IMG_EXT = wic
  • SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
  • SOC = mx8mm
  • SOC_SERIES = imx8
  • SOC_FAMILY = imx8m
  • SPL_SD_IMAGE_NAME = N/A
  • TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt5-sdk-imx8mm-var-dart.sh
  • TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/2.5.3
  • TOOLCHAIN_LOCATION = /opt/b2qt/2.5.3/environment-setup-aarch64-poky-linux
  • TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/2.5.3/sysroots/x86_64-pokysdk-linux
  • TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/2.5.3/sysroots/aarch64-poky-linux
  • TOOLCHAIN_TYPE = aarch64-poky-linux
  • YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
  • YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
  • YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
  • YOCTO_NAME = Sumo
  • YOCTO_VERSION = 2.5.3

dunfell-b2qt-5.4-2.1.x-mx8mm-v1.0

dunfell-b2qt-5.4-2.1.x-mx8mm-v1.1

dunfell-b2qt-5.4-2.1.x-mx8mm-v1.2

dunfell-b2qt-5.4-2.1.x-mx8mm-v1.3

mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0

mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1

mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0

VAR-SOM-MX8M-NANO

dunfell-b2qt-5.4-2.1.x-mx8mn-v1.0


dunfell-b2qt-5.4-2.1.x-mx8mn-v1.1


dunfell-b2qt-5.4-2.1.x-mx8mn-v1.2


mx8mn-b2qt-hardknott-5.10.72_2.2.1-v1.0


mx8mn-b2qt-kirkstone-5.15-2.0.x-v1.0



|- | Release 1.0 || |- | First B2Qt Hardknott release for VAR-SOM-MX8M-NANO || |- ! Known Issues !! |- | This NXP release has a known issue of gstreamer errors when using the OV5640 camera with a few different resolutions one after the other, while using LVDS ||


|- | Release 1.0 || |- | Initial B2Qt Kirkstone release ||


VAR-SOM-MX8X

var-som-mx8x-b2qt-v1.0

var-som-mx8x-b2qt-v1.2

var-som-mx8x-b2qt-v2.0

var-som-mx8x-b2qt-v2.1

var-som-mx8x-b2qt-v2.2

b2qt-dunfell-var-som-mx8x-v10

mx8x-b2qt-dunfell-5.4-2.1.x-v1.1

mx8x-b2qt-hardknott-5.10.72_2.2.1-v1.0

mx8x-b2qt-kirkstone-5.15-2.0.x-v1.0



|- | Release 1.0 || |- | Initial B2Qt Hardknott release ||


|- | Release 1.0 || |- | Initial B2Qt Kirkstone release ||


VAR-SOM-MX8

var-som-mx8-b2qt-v1.0


var-som-mx8-b2qt-v1.1


dunfell-b2qt-5.4-2.1.x-mx8-v1.0


dunfell-b2qt-5.4-2.1.x-mx8-v1.1


mx8-b2qt-dunfell-5.4-2.1.x-v1.2


mx8-b2qt-hardknott-5.10.72_2.2.1-v1.0


mx8-b2qt-kirkstone-5.15-2.0.x-v1.0



|- | Release 1.2 |- | U-Boot |- | imx8qm_var_som: enable RX clock delay for symphony ar8033 |- | imx8qm_var_som: fec2: add new properties to align with Hardknott release |- | imx8qm_var_som: fec1: tune phy-reset-post-delay with proper value |- | variscite: extcon-ptn5150: add ptn5150 driver |- | imx8qm-var-spear: fec: add 20ms phy-reset-post-delay |- | variscite: eth: ADIN1300: Disable RGMII RX clock delay |- | imx8qm-var-som: fix lvds_backlight_hog |- | imx8qm_var_som: drop unused board_rev environment variable |- | variscite: imx8_eeprom: drop VAR_EEPROM_F_LVDS and cleanup indentation |- | Kernel |- | imx8qm-var-som: configure symphony adi,phy-mode-overide to rgmii |- | imx8qm-var-som: ethphy1: remove no need rx-internal-delay-ps property |- | MLK-14644 PCI: imx: toggle the perst after the release of rc's reset |- | imx8qm-var-som: fec: add phy-reset-post-delay |- | net: phy: adin: add adi,phy-mode-override property |- | imx8_var_defconfig: enable docker requirements |- | imx8qm-var-som: dts: ethphy1: Add support for ADIN1300 PHY for VAR-SOM |- | MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support |- | imx8_var_defconfig: enable driver for ADIN PHY |- | imx8qm-var-som: refactor to drop imx8qp-var-common.dtsi |- | Release 1.1 |- |U-Boot |- |imx8qm-var-som: Introduce support for the i.MX8QP SoC |- |imx8qm-var-som: Provide som_wifi kernel argument |- |imx8: ahab: Only compile ahab.c for u-boot |- |imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot |- |Kernel |- |Update kernel from version 5.4.85 to 5.4.142 |- |imx8_var_defconfig: add full docker support |- |imx8qm-var-som: Introduce support for the i.MX8QP SoC |- |imx8qm-var-som: enable internal pullups for i2c0, i2c1, i2c3, i2c4 |- |Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" |- |sn65dsi83: Add device tree property to swap LVDS Channel A/B |- |imx8qm-var-spear: Adjust usb hsic pad settings |- |ARM: configs: Variscite: Enable USB_HSIC_USB3053 |- |ARM: configs: Variscite: disable EVBUG module |- |ARM64: dts: imx8: Variscite: add WM8904 DRC support for all SoMs |- |ASoC: wm8904: extend device tree support |- |meta-variscite-boot2qt |- |Update Qt from version 6.0.3 to 6.0.4 |- |manifest: meta-variscite-fslc: Update to latest |- |b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools |- |b2qt-embedded-qt5-image: allow disabling virtual terminals |- |Variscite: mask linux-firmware bbappend in meta-boot2qt-distro |- |Merge branch '6.0' into dunfell-var01 |- | Release 1.0 |- | First Release


|- | Release 1.0 || |- | Initial B2Qt Hardknott release ||


|- | Release 1.0 || |- | Initial B2Qt Kirkstone release ||


DART-MX8M-PLUS

b2qt-zeus-dart-mx8mp-v1.0

  • B2QT_BSP_VERSION = 5.15.2
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • B2QT_BRANCH = zeus-var02
  • BUILD_FOLDER = ~/var-b2qt
  • BUILD_FOLDER_B2QT = build-imx8mp-var-dart
  • BUILD_SCRIPT = . setup-environment.sh
  • DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt5-image
  • EMMC_ROOTFS_DEV = mmcblk2
  • EMMC_ROOTFS_PARTITION_NUM = p1
  • FSL_BSP_VERSION = L5.4.70_2.3.2
  • HARDWARE_NAME = DART-MX8M-PLUS
  • MACHINE_NAME = imx8mp-var-dart
  • META_VARISCITE_REPO = meta-variscite-imx
  • META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-imx
  • META_VARISCITE_BRANCH = zeus-imx-5.4.70-2.3.2-var01
  • RELEASE_NAME = b2qt-zeus-dart-mx8mp-v1.0
  • RELEASE_LINK = RELEASE_ZEUS_B2QT_V1.0_DART-MX8M-PLUS
  • RECOVERY_SD_NAME = b2qt-zeus-dart-mx8mp-v1.0.img.gz
  • RECOVERY_SD_URL = https://variscite-public.nyc3.cdn.digitaloceanspaces.com/DART-MX8M-PLUS/Software/b2qt
  • RELEASE_TAG = b2qt-zeus-dart-mx8mp-v1.0
  • IMX_ATF_PLAT = imx8mp
  • IMX_MKIMAGE_SOC = iMX8MP
  • NXP_IMX_GIT = https://github.com/nxp-imx
  • NXP_IMX_BRANCH = imx_5.4.70_2.3.0
  • NXP_KERNEL_BRANCH = imx_5.4.70_2.3.0
  • NXP_KERNEL_GIT = https://github.com/nxp-imx/linux-imx
  • NXP_FIRMWARE = firmware-imx-8.10
  • NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
  • SUPPORTED_REV_SOM = v1.1 and higher
  • SUPPORTED_REV_CARRIER = v1.2c and higher
  • B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
  • QT_VERSION = 5.15.2
  • KERNEL_GIT = https://github.com/varigit/linux-imx
  • KERNEL_BRANCH = imx_5.4.70_2.3.2_var01
  • KERNEL_DEFCONFIG = imx8_var_defconfig
  • KERNEL_DTB_SECTION = DART-MX8M-PLUS_DTB_V2
  • KERNEL_IMAGE = Image.gz
  • KERNEL_VER = 5.4.70
  • KERNEL_RECIPE_VER = 5.4.70
  • U-BOOT_GIT = https://github.com/varigit/uboot-imx
  • U-BOOT_BRANCH = imx_v2020.04_5.4.70_2.3.2_var01
  • U-BOOT_BOARD_NAME = imx8mp_var_dart
  • U-BOOT_DTB_SOM = imx8mp-var-som-symphony.dtb
  • U-BOOT_OFFSET = 32
  • U-BOOT_SD_DEFCONFIG = imx8mp_var_dart_defconfig
  • U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
  • U-BOOT_EMMC_DEV = 2
  • U-BOOT_SD_DEV = 1
  • U-BOOT_UMS_DEV = 0
  • SDCARD_IMG_EXT = wic
  • SD_TREE_SECTION = DART-MX8M-PLUS_SD_TREE
  • SOC = mx8mp
  • SOC_SERIES = imx8
  • SOC_FAMILY = imx8m
  • SPL_SD_IMAGE_NAME = N/A
  • DEFAULT_TOOLCHAIN_BB_NAME = meta-toolchain-b2qt-embedded-qt5-sdk
  • TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt5-sdk-imx8mp-var-dart.sh
  • TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/3.0
  • TOOLCHAIN_LOCATION = /opt/b2qt/3.0/environment-setup-aarch64-poky-linux
  • TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/3.0/sysroots/x86_64-pokysdk-linux
  • TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/3.0/sysroots/aarch64-poky-linux
  • TOOLCHAIN_TYPE = aarch64-poky-linux
  • YOCTO_BOOT_BOARD_SECTION = DART-MX8M-PLUS_BOOT_BOARD
  • YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-PLUS_BUILD_RESULTS_V2
  • YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
  • YOCTO_NAME = Zeus
  • YOCTO_VERSION = 3.0
  • IMX_MKIMAGE_SOC_PATCH = recipes-bsp/imx-mkimage/files/imx-mkimage-imx8m-soc.mak-add-dart-mx8mp-support.patch
  • FSLC_BSP_VERSION = 3.1
  • VARISCITE_ATF_GIT = https://github.com/varigit/imx-atf
  • VARISCITE_ATF_BRANCH = imx_5.4.70_2.3.2_var01
  • DTB_PREFIX = imx8mp-var-dart
  • DEFAULT_DTB_EMMC = imx8mp-var-dart.dtb
  • DEFAULT_DTB_SD = imx8mp-var-dart.dtb
  • DEFAULT_DTB = imx8mp-var-dart.dtb
  • USE_KMSSINK = true

b2qt-zeus-dart-mx8mp-v1.1

b2qt-zeus-dart-mx8mp-v1.2

mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3

mx8mp-b2qt-hardknott-5.10.72_2.2.1-v1.0

mx8mp-b2qt-kirkstone-5.15-2.0.x-v1.0

Retrieved from "https://variwiki.com/index.php?title=B2QT_Platform_Customization&oldid=20695"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 12 September 2022, at 18:58.

© 2024 Variscite. All rights reserved