VAR-SOM-MX8 rev changelog

VAR-SOM-MX8 changelog

VAR-SOM-MX8 V1.4

Hardware Changes

Updated Board & SOM Design to support Analog Devices Inc Ethernet PHY.

Old Manufacturer	Old MPN	New Manufacturer	New MPN
Qualcomm	AR8033-AL1A-R / AR8033-AL1B-R	Analog Devices Inc	ADIN1300BCPZ

Software Changes

Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot and kernel to the latest commit ID of the branch they are already based on.
The following are the relevant patches:

Release	U-Boot	Kernel
Yocto Dunfell / B2Qt Dunfell / Debian Bullseye (kernel 5.4.142)	1) variscite: eth: ADIN1300: Disable RGMII RX clock delay 2) imx8qm-var-spear: fec: add 20ms phy-reset-post-delay 3) imx8qm_var_som: fec1: tune phy-reset-post-delay with proper value 4) imx8qm_var_som: fec2: add new properties to align with Hardknott release 5) imx8qm_var_som: enable RX clock delay for symphony ar8033	1) imx8_var_defconfig: enable driver for ADIN PHY 2) net: phy: adin: add adi,phy-mode-override property 3) imx8qm-var-som: fec: add phy-reset-post-delay 4) imx8qm-var-som: configure symphony adi,phy-mode-overide to rgmii
Yocto Zeus (kernel 5.4.3)	1) variscite: eth: ADIN1300: Disable RGMII RX clock delay 2) imx8qm-var-som: fec: add phy-reset-post-delay 3) net: dm: fec: add phy-supply-vselect regulator 4) imx8qm_var_som: fix i2c1 pinmux 5) imx8qm_var_som: add eth1 regulators 6) imx8qm_var_som: enable RX clock delay for symphony ar8033	1) imx8_var_defconfig: enable driver for ADIN PHY 2) imx8qm-var-som: fec: add phy-reset-post-delay 3) imx8qm-var-som: configure symphony adi,phy-mode-override to rgmii 4) net: phy: adin: add adi,phy-mode-override property
Yocto Sumo / B2Qt Sumo / Debian Buster (kernel 4.14.98)	1) variscite: eth: ADIN1300: Disable RGMII RX clock delay 2) mx8qm_var_som: fec: add phy-reset-post-delay 3) gpio: pca953x_gpio: fix DT GPIO flags translation 4) net: dm: fec: add phy-supply-vselect regulator 5) imx8qm_var_som: fix i2c1 pinmux 6) imx8qm_var_som: add eth1 regulators 7) imx8qm_var_som: enable RX clock delay for symphony ar8033	1) net: fec: register ADIN1300 PHY fixup to configure rgmii 2) imx8qm-var-som: fec: add phy-reset-post-delay 3) net: fec: adin1300_phy_fixup: add property adi,phy-mode-override 4) net: fec: adin1300_phy_fixup: only register fixup once 5) imx8qm-var-som: configure symphony adi,phy-mode-overide to rgmii
Android 11.0.0_1.0.0 (kernel 5.4.47)	1) variscite: eth: ADIN1300: Disable RGMII RX clock delay 2) imx8qm_var_som: fec2: aligned to fec1 for consistency 3) imx8qm_var_som: fec1: tune phy-reset-post-delay with proper value	1) imx8qm-var-som: ethphy1: remove no need rx-internal-delay-ps property 2)imx8_var_android_defconfig: enable driver for ADIN PHY 3) imx8qm-var-som: fec: add phy-reset-post-delay 4) net: phy: adin: add adi,phy-mode-override property
Android 10.0.0_2.5.0 (kernel 5.4.47)	Coming soon	Coming soon
Pie 9.0.0_2.0.0 (kernel 4.14.98)	Coming soon	Coming soon

Note: These patches are backward-compatible with the previous SOM revisions.