B2QT DART-MX8M-PLUS: Difference between revisions
From Variscite Wiki
(Migrate B2QT Platform Customization to SoC page to reduce pages loading time) |
(Add release notes section) |
||
| Line 338: | Line 338: | ||
-->{{#vardefine:RECOVERY_SD_NAME|b2qt-zeus-dart-mx8mp-v1.2.img.gz}} <!-- | -->{{#vardefine:RECOVERY_SD_NAME|b2qt-zeus-dart-mx8mp-v1.2.img.gz}} <!-- | ||
-->{{#vardefine:RELEASE_DATE|12/09/2021}}<section end=RELEASE_ZEUS_B2QT_V1.2_DART-MX8M-PLUS/> | -->{{#vardefine:RELEASE_DATE|12/09/2021}}<section end=RELEASE_ZEUS_B2QT_V1.2_DART-MX8M-PLUS/> | ||
=== b2qt-zeus- | === mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3 === | ||
<section begin=mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3/><!-- | <section begin=mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3/><!-- | ||
-->{{#vardefine:YOCTO_SUPPORT_DOCKER|yes}} <!-- | -->{{#vardefine:YOCTO_SUPPORT_DOCKER|yes}} <!-- | ||
| Line 346: | Line 346: | ||
-->{{#vardefine:RECOVERY_SD_NAME|mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3.img.gz}} <!-- | -->{{#vardefine:RECOVERY_SD_NAME|mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3.img.gz}} <!-- | ||
-->{{#vardefine:RELEASE_DATE|06/06/2022}}<section end=mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3/> | -->{{#vardefine:RELEASE_DATE|06/06/2022}}<section end=mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3/> | ||
<includeonly> | |||
<section begin=RN_mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| '''U-Boot''' || | |||
|- | |||
| variscite: eth: ADIN1300: Disable RGMII RX clock delay || | |||
|- | |||
| '''Linux''' || | |||
|- | |||
| imx8mp-var-dart: Update machine name || | |||
|- | |||
| imx8_var_defconfig: enable driver for ADIN PHY || | |||
|- | |||
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| Updated linux-variscite to latest version || Introduced support for pcal6408<br>(pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A) | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Updated u-boot-variscite to latest version || Aligned lpddr4_timing.c to latest version generated by RPA tool V6<br>Added m7 core environment | |||
|- | |||
| Updated linux-variscite to latest version || Added full Docker support<br>Added CAN support to M7 device trees<br>Fixed flexcan pinmux for DT8CustomBoard 1.x<br>Fixed PMIC IRQ iomux settings<br>Fix for VAR-SOM-MX8M-PLUS iomuxc pinctrl<br>Added WM8904 DRC support for all oMs<br>Added device trees for M7 configuration | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release || | |||
<section end=RN_mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3/> | |||
</includeonly> | |||
Revision as of 14:01, 6 June 2022
DART-MX8M-PLUS
b2qt-zeus-dart-mx8mp-v1.0
- B2QT_BSP_VERSION = 5.15.2
- B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
- B2QT_BRANCH = zeus-var02
- BUILD_FOLDER = ~/var-b2qt
- BUILD_FOLDER_B2QT = build-imx8mp-var-dart
- BUILD_SCRIPT = . setup-environment.sh
- DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt5-image
- EMMC_ROOTFS_DEV = mmcblk2
- EMMC_ROOTFS_PARTITION_NUM = p1
- FSL_BSP_VERSION = L5.4.70_2.3.2
- HARDWARE_NAME = DART-MX8M-PLUS
- MACHINE_NAME = imx8mp-var-dart
- META_VARISCITE_REPO = meta-variscite-imx
- META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-imx
- META_VARISCITE_BRANCH = zeus-imx-5.4.70-2.3.2-var01
- RELEASE_NAME = b2qt-zeus-dart-mx8mp-v1.0
- RELEASE_LINK = RELEASE_ZEUS_B2QT_V1.0_DART-MX8M-PLUS
- RECOVERY_SD_NAME = b2qt-zeus-dart-mx8mp-v1.0.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-PLUS/Software/b2qt
- RELEASE_TAG = b2qt-zeus-dart-mx8mp-v1.0
- IMX_ATF_PLAT = imx8mp
- IMX_MKIMAGE_SOC = iMX8MP
- NXP_IMX_GIT = https://source.codeaurora.org/external/imx
- NXP_IMX_BRANCH = imx_5.4.70_2.3.0
- NXP_KERNEL_BRANCH = imx_5.4.70_2.3.0
- NXP_KERNEL_GIT = https://source.codeaurora.org/external/imx/linux-imx
- NXP_FIRMWARE = firmware-imx-8.10
- NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
- SUPPORTED_REV_SOM = v1.1 and higher
- SUPPORTED_REV_CARRIER = v1.2c and higher
- B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
- QT_VERSION = 5.15.2
- KERNEL_GIT = https://github.com/varigit/linux-imx
- KERNEL_BRANCH = imx_5.4.70_2.3.2_var01
- KERNEL_DEFCONFIG = imx8_var_defconfig
- KERNEL_DTB_SECTION = DART-MX8M-PLUS_DTB_V2
- KERNEL_IMAGE = Image.gz
- KERNEL_VER = 5.4.70
- KERNEL_RECIPE_VER = 5.4
- U-BOOT_GIT = https://github.com/varigit/uboot-imx
- U-BOOT_BRANCH = imx_v2020.04_5.4.70_2.3.2_var01
- U-BOOT_BOARD_NAME = imx8mp_var_dart
- U-BOOT_DTB_SOM = imx8mp-var-som-symphony.dtb
- U-BOOT_OFFSET = 32
- U-BOOT_SD_DEFCONFIG = imx8mp_var_dart_defconfig
- U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
- U-BOOT_EMMC_DEV = 2
- U-BOOT_SD_DEV = 1
- U-BOOT_UMS_DEV = 0
- SDCARD_IMG_EXT = wic
- SD_TREE_SECTION = DART-MX8M-PLUS_SD_TREE
- SOC = mx8mp
- SOC_SERIES = imx8
- SOC_FAMILY = imx8m
- SPL_SD_IMAGE_NAME = N/A
- DEFAULT_TOOLCHAIN_BB_NAME = meta-toolchain-b2qt-embedded-qt5-sdk
- TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt5-sdk-imx8mp-var-dart.sh
- TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/3.0
- TOOLCHAIN_LOCATION = /opt/b2qt/3.0/environment-setup-aarch64-poky-linux
- TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/3.0/sysroots/x86_64-pokysdk-linux
- TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/3.0/sysroots/aarch64-poky-linux
- TOOLCHAIN_TYPE = aarch64-poky-linux
- YOCTO_BOOT_BOARD_SECTION = DART-MX8M-PLUS_BOOT_BOARD
- YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-PLUS_BUILD_RESULTS_V2
- YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
- YOCTO_NAME = Zeus
- YOCTO_VERSION = 3.0
- IMX_MKIMAGE_SOC_PATCH = recipes-bsp/imx-mkimage/files/imx-mkimage-imx8m-soc.mak-add-dart-mx8mp-support.patch
- FSLC_BSP_VERSION = 3.1
- VARISCITE_ATF_GIT = https://github.com/varigit/imx-atf
- VARISCITE_ATF_BRANCH = imx_5.4.70_2.3.2_var01
- DTB_PREFIX = imx8mp-var-dart
- DEFAULT_DTB_EMMC = imx8mp-var-dart.dtb
- DEFAULT_DTB_SD = imx8mp-var-dart.dtb
- DEFAULT_DTB = imx8mp-var-dart.dtb
- USE_KMSSINK = true
b2qt-zeus-dart-mx8mp-v1.1
- B2QT_BSP_VERSION = 5.15.2
- B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
- B2QT_BRANCH = zeus-var02
- BUILD_FOLDER = ~/var-b2qt
- BUILD_FOLDER_B2QT = build-imx8mp-var-dart
- BUILD_SCRIPT = . setup-environment.sh
- DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt5-image
- EMMC_ROOTFS_DEV = mmcblk2
- EMMC_ROOTFS_PARTITION_NUM = p1
- FSL_BSP_VERSION = L5.4.70_2.3.2
- HARDWARE_NAME = DART-MX8M-PLUS
- MACHINE_NAME = imx8mp-var-dart
- META_VARISCITE_REPO = meta-variscite-imx
- META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-imx
- META_VARISCITE_BRANCH = zeus-imx-5.4.70-2.3.2-var01
- RELEASE_NAME = b2qt-zeus-dart-mx8mp-v1.1
- RELEASE_LINK = RELEASE_ZEUS_B2QT_V1.1_DART-MX8M-PLUS
- RECOVERY_SD_NAME = b2qt-zeus-dart-mx8mp-v1.1.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-PLUS/Software/b2qt
- RELEASE_TAG = b2qt-zeus-dart-mx8mp-v1.1
- IMX_ATF_PLAT = imx8mp
- IMX_MKIMAGE_SOC = iMX8MP
- NXP_IMX_GIT = https://source.codeaurora.org/external/imx
- NXP_IMX_BRANCH = imx_5.4.70_2.3.0
- NXP_KERNEL_BRANCH = imx_5.4.70_2.3.0
- NXP_KERNEL_GIT = https://source.codeaurora.org/external/imx/linux-imx
- NXP_FIRMWARE = firmware-imx-8.10
- NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
- SUPPORTED_REV_SOM = v1.1 and higher
- SUPPORTED_REV_CARRIER = v1.2c and higher
- B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
- QT_VERSION = 5.15.2
- KERNEL_GIT = https://github.com/varigit/linux-imx
- KERNEL_BRANCH = imx_5.4.70_2.3.2_var01
- KERNEL_DEFCONFIG = imx8_var_defconfig
- KERNEL_DTB_SECTION = DART-MX8M-PLUS_DTB_V2
- KERNEL_IMAGE = Image.gz
- KERNEL_VER = 5.4.70
- KERNEL_RECIPE_VER = 5.4
- U-BOOT_GIT = https://github.com/varigit/uboot-imx
- U-BOOT_BRANCH = imx_v2020.04_5.4.70_2.3.2_var01
- U-BOOT_BOARD_NAME = imx8mp_var_dart
- U-BOOT_DTB_SOM = imx8mp-var-som-symphony.dtb
- U-BOOT_OFFSET = 32
- U-BOOT_SD_DEFCONFIG = imx8mp_var_dart_defconfig
- U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
- U-BOOT_EMMC_DEV = 2
- U-BOOT_SD_DEV = 1
- U-BOOT_UMS_DEV = 0
- SDCARD_IMG_EXT = wic
- SD_TREE_SECTION = DART-MX8M-PLUS_SD_TREE
- SOC = mx8mp
- SOC_SERIES = imx8
- SOC_FAMILY = imx8m
- SPL_SD_IMAGE_NAME = N/A
- DEFAULT_TOOLCHAIN_BB_NAME = meta-toolchain-b2qt-embedded-qt5-sdk
- TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt5-sdk-imx8mp-var-dart.sh
- TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/3.0
- TOOLCHAIN_LOCATION = /opt/b2qt/3.0/environment-setup-aarch64-poky-linux
- TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/3.0/sysroots/x86_64-pokysdk-linux
- TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/3.0/sysroots/aarch64-poky-linux
- TOOLCHAIN_TYPE = aarch64-poky-linux
- YOCTO_BOOT_BOARD_SECTION = DART-MX8M-PLUS_BOOT_BOARD
- YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-PLUS_BUILD_RESULTS_V2
- YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
- YOCTO_NAME = Zeus
- YOCTO_VERSION = 3.0
- IMX_MKIMAGE_SOC_PATCH = recipes-bsp/imx-mkimage/files/imx-mkimage-imx8m-soc.mak-add-dart-mx8mp-support.patch
- FSLC_BSP_VERSION = 3.1
- VARISCITE_ATF_GIT = https://github.com/varigit/imx-atf
- VARISCITE_ATF_BRANCH = imx_5.4.70_2.3.2_var01
- DTB_PREFIX = imx8mp-var-dart
- DEFAULT_DTB_EMMC = imx8mp-var-dart.dtb
- DEFAULT_DTB_SD = imx8mp-var-dart.dtb
- DEFAULT_DTB = imx8mp-var-dart.dtb
- USE_KMSSINK = true
b2qt-zeus-dart-mx8mp-v1.2
mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3