DART-MX8M-MINI Release Notes: Difference between revisions
From Variscite Wiki
No edit summary |
No edit summary |
||
| Line 1,845: | Line 1,845: | ||
| imx8mm-var-dart: read carrier_rev from eeprom | | imx8mm-var-dart: read carrier_rev from eeprom | ||
|- | |- | ||
| Set AR8033 VDDH_REG to 1. | | Set AR8033 VDDH_REG to 1.8V || | ||
|- | |- | ||
|'''Linux updates updates''' || | |'''Linux updates updates''' || | ||
Revision as of 13:06, 4 April 2022
DART-MX8M-MINI
/ VAR-SOM-MX8M-MINI Release Notes
Yocto warrior-fsl-4.19.35-mx8mm-v1.1
Release Notes
| Based on release | Yocto: Poky 2.7, BSP: NXP L4.19.35-1.1.0, Linux: imx_4.19.35_1.1.0 |
| Release tag | warrior-fsl-4.19.35-mx8mm-v1.1 |
| Release manifest | imx-4.19.35-1.1.0-var01.xml |
| Date | 9/23/2020 |
| Supported platforms | DART-MX8M-MINI / VAR-SOM-MX8M-MINI |
| SOM revision | v1.0 and higher |
| File System build system | Yocto Warrior |
| Recovery SD card link | dart-mx8mm-recovery-sd.v32.img.gz |
Relevant git Repositories
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
| Change List |
|---|
| Release 1.1 |
| Yocto updates |
| Added an image with Docker support |
| fsl-image-qt5: allow building the toolchain using populate_sdk |
| Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies |
| Kernel updates |
| Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP) |
| Kernel defconfig: Extend Docker features |
| U-Boot updates |
| SPL: Disabled SD card detect pin |
| Fixed M4 binary loading when using the TCM |
| Release 1.0 |
| Upgraded to NXP BSP release 4.19.35_1.1.0 |