DART-MX8M Release Notes: Difference between revisions
From Variscite Wiki
No edit summary |
No edit summary |
||
| Line 831: | Line 831: | ||
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 || | | linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 || | ||
|- | |- | ||
| | | sn65dsi83: Add optional "ti,even-odd-swap" device tree property to swap LVDS Channel A/B | ||
|- | |||
| Add PCIE PHY power regulator || | |||
|- | |||
| Remove "hard-wired" PCIE0 controller property || | |||
|- | |||
| MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 || | |||
|- | |||
| MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy || | |||
|- | |||
| MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy || For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599 | |||
|- | |- | ||
| fsl-image-gui: Add libgpiod and libgpiod-tools || | | fsl-image-gui: Add libgpiod and libgpiod-tools || | ||
Revision as of 13:47, 29 September 2021
DART-MX8M
Release Notes
Yocto warrior-fsl-4.19.35-mx8mq-v1.1
Release Notes
| Based on release | Yocto: Poky 2.7, BSP: NXP L4.19.35-1.1.0, Linux: imx_4.19.35_1.1.0 |
| Release tag | warrior-fsl-4.19.35-mx8mq-v1.1 |
| Release manifest | imx-4.19.35-1.1.0-var01.xml |
| Date | 5/27/2020 |
| Supported platforms | DART-MX8M |
| SOM revision | v1.1 and higher |
| File System build system | Yocto Warrior |
| Recovery SD card link | dart-mx8m-recovery-sd.v44a.img.gz |
Relevant git Repositories
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
| Change List |
|---|
| Release 1.1 |
| Kernel updates |
| Fixed LCD shifting issue after resume |
| MLK-22694: arch64: dts: fsl-imx8mq: Move src for dsi nodes and add lcdif clock |
| MLK-22694: imx: nwl_dsi-imx: Move mipi resets for i.MX8MQ |
| Enable HDMI Audio |
| Release 1.0 |
| Upgraded to NXP BSP release 4.19.35_1.1.0 |