Revision as of 12:00, 4 April 2021

DART-MX8M-MINI / VAR-SOM-MX8M-MINI Release Notes

Yocto warrior-fsl-4.19.35-mx8mm-v1.1

Release Notes

Source	Repository	Branch	Commit ID
U-Boot	https://github.com/varigit/uboot-imx	imx_v2019.04_4.19.35_1.1.0-var01	3e1643239fb11297209254dbaa803425cf0c1702
Kernel	https://github.com/varigit/linux-imx	imx_4.19.35_1.1.0_var01	dc7a2fde4ab056303e2011347438bdae23036c5e
meta-variscite-imx	https://github.com/varigit/meta-variscite-imx	warrior-imx-4.19.35-var01	207ebb821ab9d1942df73f6d1b294884359ea626

After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change List
Release 1.1
Yocto Updates
Added an image with Docker support
fsl-image-qt5: allow building the toolchain using populate_sdk
Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies
Kernel Updates
Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP)
Kernel defconfig: Extend Docker features
U-Boot Updates
SPL: Disabled SD card detect pin
Fixed M4 binary loading when using the TCM
Release 1.0
Upgraded to NXP BSP release 4.19.35_1.1.0

@@ Line 706: / Line 706: @@
 | <span {{#var:STYLE_RELEASE}}>Release 1.7</span> ||
 |-
-| Fix CAN controller pins  || MCP2518FD driver does not use TX-INT pin, so remove GPIO1_15 from CAN controller pins.
+| Fix CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
 |-
 | <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
@@ Line 785: / Line 785: @@
 | <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
 |-
-|  Fix CAN controller pins  || MCP2518FD driver does not use TX-INT pin, so remove GPIO1_15 from CAN controller pins.
+|  Fix CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
 |-
 | <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||