B2QT Platform Customization: Difference between revisions

From Variscite Wiki
Line 1,031: Line 1,031:
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/{{#var:TOOLCHAIN_TYPE}}}} <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/{{#var:TOOLCHAIN_TYPE}}}} <!--
--><section end=RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI/>
--><section end=RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI/>
*B2QT_BSP_VERSION = '''{{#var:B2QT_BSP_VERSION}}'''
*B2QT_GIT = '''{{#var:B2QT_GIT}}'''
*B2QT_BRANCH = '''{{#var:B2QT_BRANCH}}'''
*BUILD_FOLDER = '''{{#var:BUILD_FOLDER}}'''
*BUILD_FOLDER_B2QT = '''{{#var:BUILD_FOLDER_B2QT}}'''
*BUILD_SCRIPT = '''{{#var:BUILD_SCRIPT}}'''
*DEFAULT_IMAGE_BB_NAME = '''{{#var:DEFAULT_IMAGE_BB_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*HARDWARE_NAME = '''{{#var:HARDWARE_NAME}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*META_VARISCITE_REPO = '''{{#var:META_VARISCITE_REPO}}'''
*META_VARISCITE_GIT = '''{{#var:META_VARISCITE_GIT}}'''
*META_VARISCITE_BRANCH = '''{{#var:META_VARISCITE_BRANCH}}'''
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_TAG = '''{{#var:RELEASE_TAG}}'''
*IMX_ATF_PLAT = '''{{#var:IMX_ATF_PLAT}}'''
*IMX_MKIMAGE_SOC = '''{{#var:IMX_MKIMAGE_SOC}}'''
*NXP_IMX_GIT = '''{{#var:NXP_IMX_GIT}}'''
*NXP_IMX_BRANCH = '''{{#var:NXP_IMX_BRANCH}}'''
*NXP_KERNEL_BRANCH = '''{{#var:NXP_KERNEL_BRANCH}}'''
*NXP_KERNEL_GIT = '''{{#var:NXP_KERNEL_GIT}}'''
*NXP_FIRMWARE = '''{{#var:NXP_FIRMWARE}}'''
*NXP_FIRMWARE_URL = '''{{#var:NXP_FIRMWARE_URL}}'''
*SUPPORTED_REV_SOM = '''{{#var:SUPPORTED_REV_SOM}}'''
*SUPPORTED_REV_CARRIER = '''{{#var:SUPPORTED_REV_CARRIER}}'''
*B2QT_LINK = '''{{#var:B2QT_LINK}}'''
*QT_VERSION = '''{{#var:QT_VERSION}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_BOARD_NAME = '''{{#var:U-BOOT_BOARD_NAME}}'''
*U-BOOT_DTB_DART = '''{{#var:U-BOOT_DTB_DART}}'''
*U-BOOT_DTB_SOM = '''{{#var:U-BOOT_DTB_SOM}}'''
*U-BOOT_DTB_SOM_10 = '''{{#var:U-BOOT_DTB_SOM_10}}'''
*U-BOOT_OFFSET = '''{{#var:U-BOOT_OFFSET}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_EMMC_DEV = '''{{#var:U-BOOT_EMMC_DEV}}'''
*U-BOOT_SD_DEV = '''{{#var:U-BOOT_SD_DEV}}'''
*U-BOOT_UMS_DEV = '''{{#var:U-BOOT_UMS_DEV}}'''
*SDCARD_IMG_EXT = '''{{#var:SDCARD_IMG_EXT}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*SOC = '''{{#var:SOC}}'''
*SOC_SERIES = '''{{#var:SOC_SERIES}}'''
*SOC_FAMILY = '''{{#var:SOC_FAMILY}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*TOOLCHAIN_INSTALL_B2QT_NAME = '''{{#var:TOOLCHAIN_INSTALL_B2QT_NAME}}'''
*TOOLCHAIN_ROOT_LOCATION = '''{{#var:TOOLCHAIN_ROOT_LOCATION}}'''
*TOOLCHAIN_LOCATION = '''{{#var:TOOLCHAIN_LOCATION}}'''
*TOOLCHAIN_HOST_SYSROOT_LOCATION = '''{{#var:TOOLCHAIN_HOST_SYSROOT_LOCATION}}'''
*TOOLCHAIN_TARGET_SYSROOT_LOCATION = '''{{#var:TOOLCHAIN_TARGET_SYSROOT_LOCATION}}'''
*TOOLCHAIN_TYPE = '''{{#var:TOOLCHAIN_TYPE}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
=== dart-mx8mm-b2qt-v1.3 ===
<section begin=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/> {{#vardefine:B2QT_BSP_VERSION|5.12}} <!--
-->{{#vardefine:B2QT_GIT|https://github.com/varigit/meta-variscite-boot2qt.git}} <!--
-->{{#vardefine:B2QT_BRANCH|dunfell-var01}} <!--
-->{{#vardefine:BUILD_FOLDER|~/var-b2qt}}  <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:FSL_BSP_VERSION|5.4.24_2.1.0}}  <!--
-->{{#vardefine:HARDWARE_NAME|DART-MX8M-MINI}} <!--
-->{{#vardefine:MACHINE_NAME|imx8mm-var-dart}} <!--
-->{{#vardefine:META_VARISCITE_REPO|meta-variscite-fslc}} <!--
-->{{#vardefine:META_VARISCITE_GIT|https://github.com/varigit/{{#var:META_VARISCITE_REPO}}}} <!--
-->{{#vardefine:META_VARISCITE_BRANCH|dunfell}} <!--
-->{{#vardefine:BUILD_FOLDER_B2QT|build-{{#var:MACHINE_NAME}}}}  <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment.sh}} <!--
-->{{#vardefine:DEFAULT_IMAGE_BB_NAME|b2qt-embedded-qt6-image}}  <!--
-->{{#vardefine:RELEASE_NAME|b2qt-dunfell-dart-mx8mm-v10}} <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/b2qt}} <!--
-->{{#vardefine:RELEASE_TAG|b2qt_dunfell_dart-mx8mm_v10}} <!--
-->{{#vardefine:IMX_ATF_PLAT|imx8mm}} <!--
-->{{#vardefine:IMX_MKIMAGE_SOC|iMX8MM}} <!--
-->{{#vardefine:NXP_IMX_GIT|https://source.codeaurora.org/external/imx}} <!--
-->{{#vardefine:NXP_IMX_BRANCH|imx_5.4.24_2.1.0}} <!--
-->{{#vardefine:NXP_KERNEL_BRANCH|5.4-2.1.x-imx}} <!--
-->{{#vardefine:NXP_KERNEL_GIT|https://github.com/Freescale/linux-fslc}} <!--
-->{{#vardefine:NXP_FIRMWARE_URL|https://www.nxp.com/lgfiles/NMG/MAD/YOCTO}} <!--
-->{{#vardefine:NXP_FIRMWARE|firmware-imx-8.8}} <!--
-->{{#vardefine:SUPPORTED_REV_SOM|v1.1 and higher}} <!--
-->{{#vardefine:SUPPORTED_REV_CARRIER|v1.2c and higher}} <!--
-->{{#vardefine:RELEASE_DATE|03/30/2021}} <!--
-->{{#vardefine:B2QT_LINK|https://doc.qt.io/QtForDeviceCreation/}} <!--
-->{{#vardefine:QT_VERSION|6.0 RC}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/linux-imx}} <!--
-->{{#vardefine:KERNEL_BRANCH|5.4-2.1.x-imx_var01}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx8_var_defconfig}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|DART-MX8M-MINI_DTB}} <!--
-->{{#vardefine:KERNEL_IMAGE|Image.gz}} <!--
-->{{#vardefine:KERNEL_VER|5.4.85}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2020.04_5.4.24_2.1.0_var02}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|imx8mm_var_dart}} <!--
-->{{#vardefine:U-BOOT_DTB_SOM|imx8mm-var-som-symphony.dtb}} <!--
-->{{#vardefine:U-BOOT_DTB_DART|imx8mm-var-dart-customboard.dtb}} <!--
-->{{#vardefine:U-BOOT_OFFSET|33}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|imx8mm_var_dart_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|imx-boot-sd.bin}} <!--
-->{{#vardefine:U-BOOT_EMMC_DEV|2}} <!--
-->{{#vardefine:U-BOOT_SD_DEV|1}} <!--
-->{{#vardefine:U-BOOT_UMS_DEV|0}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|wic.gz}} <!--
-->{{#vardefine:SD_TREE_SECTION|DART-MX8M-MINI_SD_TREE}} <!--
-->{{#vardefine:SOC|mx8mm}} <!--
-->{{#vardefine:SOC_SERIES|imx8}} <!--
-->{{#vardefine:SOC_FAMILY|imx8m}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|N/A}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M-MINI_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|DART-MX8M-MINI_BUILD_RESULTS_DUNFELL_V12}} <!--
-->{{#vardefine:YOCTO_NAME|Dunfell}} <!--
-->{{#vardefine:YOCTO_VERSION|3.1}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_B2QT_NAME|b2qt-x86_64-meta-toolchain-b2qt-embedded-qt6-sdk-{{#var:MACHINE_NAME}}.sh}} <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/b2qt/{{#var:YOCTO_VERSION}}}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-{{#var:TOOLCHAIN_TYPE}}}} <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/{{#var:TOOLCHAIN_TYPE}}}} <!--
--><section end=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/>
*B2QT_BSP_VERSION = '''{{#var:B2QT_BSP_VERSION}}'''
*B2QT_BSP_VERSION = '''{{#var:B2QT_BSP_VERSION}}'''
*B2QT_GIT = '''{{#var:B2QT_GIT}}'''
*B2QT_GIT = '''{{#var:B2QT_GIT}}'''

Revision as of 07:51, 30 March 2021

Release Notes

Based on release B2Qt: Poky , BSP: NXP , Linux: NXP [/log/?h= ]
Nature of release B2Qt Community version release
Release git [/tree/ ]
Release tag [/tree/ ]
Date
Supported platforms
SOM revision
Carrier board revision
Embedded Linux Distribution B2Qt Community BSP based
B2Qt Community BSP link [ ]
Qt Version
Kernel git [/tree/ ]
Kernel branch [/tree/ ]
U-Boot git [/tree/ ]
U-Boot branch [/tree/ ]
File System build system B2Qt
Recovery SD card link [/ ]

</includeonly>

B2QT Platform Customizations

VAR-SOM-MX6

morty-b2qt-4.1.15-mx6-v1.0

thud-b2qt-4.14.78-mx6-v1.0

DART-6UL

morty-b2qt-4.1.15-mx6ul-v1.0

  • RELEASE_NAME = morty-b2qt-4.1.15-mx6ul-v1.0
  • RELEASE_LINK = RELEASE_MORTY_B2QT_V1.0_DART-6UL
  • YOCTO_NAME = Morty
  • YOCTO_VERSION = 2.2.1
  • B2QT_BSP_VERSION = 5.9
  • FSL_BSP_VERSION = L4.1.15_2.0.0-ga
  • RECOVERY_SD_NAME = morty-b2qt-4.1.15-mx6ul-v1.0.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/b2qt
  • RELEASE_NOTES_LINK = TBD
  • MACHINE_NAME = imx6ul-var-dart
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • YOCTO_BRANCH = morty
  • B2QT_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
  • B2QT_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
  • KERNEL_DTB_SECTION = DART-6UL_DTB
  • SD_TREE_SECTION = DART-6UL_SD_TREE
  • QT_PLATFORM_PLUGIN = eglfs

morty-b2qt-4.1.15-mx6ul-v1.1

  • RELEASE_NAME = morty-b2qt-4.1.15-mx6ul-v1.1
  • RELEASE_LINK = RELEASE_MORTY_B2QT_V1.1_DART-6UL
  • YOCTO_NAME = Morty
  • YOCTO_VERSION = 2.2.1
  • B2QT_BSP_VERSION = 5.9.3
  • FSL_BSP_VERSION = L4.1.15_2.0.0-ga
  • RECOVERY_SD_NAME = morty-b2qt-4.1.15-mx6ul-v1.1.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/b2qt
  • RELEASE_NOTES_LINK = TBD
  • MACHINE_NAME = imx6ul-var-dart
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • YOCTO_BRANCH = morty
  • B2QT_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
  • B2QT_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
  • KERNEL_DTB_SECTION = DART-6UL_DTB
  • SD_TREE_SECTION = DART-6UL_SD_TREE
  • QT_PLATFORM_PLUGIN = eglfs

thud-b2qt-4.14.78-mx6ul-v1.0

zeus-b2qt-5.4.3-mx6ul-v1.0

zeus-b2qt-5.4.3-mx6ul-v1.1

VAR-SOM-MX7

morty-b2qt-4.1.15-mx7-v1.0

  • RELEASE_NAME = morty-b2qt-4.1.15-mx7-v1.0
  • RELEASE_LINK = RELEASE_MORTY_B2QT_V1.0_VAR-SOM-MX7
  • YOCTO_NAME = Morty
  • YOCTO_VERSION = 2.2.1
  • B2QT_BSP_VERSION = 5.9
  • FSL_BSP_VERSION = L4.1.15_2.0.0-ga
  • RECOVERY_SD_NAME = morty-b2qt-4.1.15-mx7-v1.0.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/b2qt
  • RELEASE_NOTES_LINK = TBD
  • MACHINE_NAME = imx7-var-som
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • YOCTO_BRANCH = morty
  • B2QT_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
  • B2QT_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
  • KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
  • SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE
  • QT_PLATFORM_PLUGIN = linuxfb

thud-b2qt-4.14.78-mx7-v1.0

DART-MX8M

b2qt-sumo-dart-mx8m-v1.0

b2qt-sumo-dart-mx8m-v1.1

DART-MX8M-MINI

dart-mx8mm-b2qt-v1.0

dart-mx8mm-b2qt-v1.1

dart-mx8mm-b2qt-v1.2

  • B2QT_BSP_VERSION = 5.12
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • B2QT_BRANCH = sumo-var01
  • BUILD_FOLDER = ~/var-b2qt
  • BUILD_FOLDER_B2QT = build-imx8mm-var-dart
  • BUILD_SCRIPT = . setup-environment.sh
  • DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt5-image
  • EMMC_ROOTFS_DEV = mmcblk2
  • EMMC_ROOTFS_PARTITION_NUM = p1
  • FSL_BSP_VERSION = L4.14.98-2.0.0_ga
  • HARDWARE_NAME = DART-MX8M-MINI
  • MACHINE_NAME = imx8mm-var-dart
  • META_VARISCITE_REPO = meta-variscite-imx
  • META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-imx
  • META_VARISCITE_BRANCH = sumo-imx-4.14.98-var01
  • RELEASE_NAME = b2qt-sumo-dart-mx8mm-v12
  • RELEASE_LINK = RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI
  • RECOVERY_SD_NAME = b2qt-sumo-dart-mx8mm-v12.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/b2qt
  • RELEASE_TAG = b2qt_sumo_dart-mx8mm_v12
  • IMX_ATF_PLAT = imx8mm
  • IMX_MKIMAGE_SOC = iMX8MM
  • NXP_IMX_GIT = https://source.codeaurora.org/external/imx
  • NXP_IMX_BRANCH = imx_4.14.98_2.0.0_ga
  • NXP_KERNEL_BRANCH = imx_4.14.98_2.0.0_ga
  • NXP_KERNEL_GIT = https://source.codeaurora.org/external/imx/linux-imx
  • NXP_FIRMWARE = firmware-imx-8.1.1
  • NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
  • SUPPORTED_REV_SOM = v1.1 and higher
  • SUPPORTED_REV_CARRIER = v1.1 and higher
  • B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
  • QT_VERSION = 5.12.9 RC
  • KERNEL_GIT = https://github.com/varigit/linux-imx
  • KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
  • KERNEL_DEFCONFIG = imx8_var_defconfig
  • KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
  • KERNEL_IMAGE = Image.gz
  • U-BOOT_GIT = https://github.com/varigit/uboot-imx
  • U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
  • U-BOOT_BOARD_NAME = imx8mm_var_dart
  • U-BOOT_DTB_DART = fsl-imx8mm-var-dart.dtb
  • U-BOOT_DTB_SOM = fsl-imx8mm-var-som.dtb
  • U-BOOT_DTB_SOM_10 = fsl-imx8mm-var-som-rev10.dtb
  • U-BOOT_OFFSET = 33
  • U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
  • U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
  • U-BOOT_EMMC_DEV = 1
  • U-BOOT_SD_DEV = 0
  • U-BOOT_UMS_DEV = 0
  • SDCARD_IMG_EXT = wic
  • SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
  • SOC = mx8mm
  • SOC_SERIES = imx8
  • SOC_FAMILY = imx8m
  • SPL_SD_IMAGE_NAME = N/A
  • TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt5-sdk-imx8mm-var-dart.sh
  • TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/2.5.3
  • TOOLCHAIN_LOCATION = /opt/b2qt/2.5.3/environment-setup-aarch64-poky-linux
  • TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/2.5.3/sysroots/x86_64-pokysdk-linux
  • TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/2.5.3/sysroots/aarch64-poky-linux
  • TOOLCHAIN_TYPE = aarch64-poky-linux
  • YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
  • YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
  • YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
  • YOCTO_NAME = Sumo
  • YOCTO_VERSION = 2.5.3

dart-mx8mm-b2qt-v1.3

  • B2QT_BSP_VERSION = 5.12
  • B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
  • B2QT_BRANCH = dunfell-var01
  • BUILD_FOLDER = ~/var-b2qt
  • BUILD_FOLDER_B2QT = build-imx8mm-var-dart
  • BUILD_SCRIPT = . setup-environment.sh
  • DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt6-image
  • EMMC_ROOTFS_DEV = mmcblk2
  • EMMC_ROOTFS_PARTITION_NUM = p1
  • FSL_BSP_VERSION = 5.4.24_2.1.0
  • HARDWARE_NAME = DART-MX8M-MINI
  • MACHINE_NAME = imx8mm-var-dart
  • META_VARISCITE_REPO = meta-variscite-fslc
  • META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-fslc
  • META_VARISCITE_BRANCH = dunfell
  • RELEASE_NAME = b2qt-dunfell-dart-mx8mm-v10
  • RELEASE_LINK = RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI
  • RECOVERY_SD_NAME = b2qt-dunfell-dart-mx8mm-v10.img.gz
  • RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/b2qt
  • RELEASE_TAG = b2qt_dunfell_dart-mx8mm_v10
  • IMX_ATF_PLAT = imx8mm
  • IMX_MKIMAGE_SOC = iMX8MM
  • NXP_IMX_GIT = https://source.codeaurora.org/external/imx
  • NXP_IMX_BRANCH = imx_5.4.24_2.1.0
  • NXP_KERNEL_BRANCH = 5.4-2.1.x-imx
  • NXP_KERNEL_GIT = https://github.com/Freescale/linux-fslc
  • NXP_FIRMWARE = firmware-imx-8.8
  • NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
  • SUPPORTED_REV_SOM = v1.1 and higher
  • SUPPORTED_REV_CARRIER = v1.2c and higher
  • B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
  • QT_VERSION = 6.0 RC
  • KERNEL_GIT = https://github.com/varigit/linux-imx
  • KERNEL_BRANCH = 5.4-2.1.x-imx_var01
  • KERNEL_DEFCONFIG = imx8_var_defconfig
  • KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
  • KERNEL_IMAGE = Image.gz
  • U-BOOT_GIT = https://github.com/varigit/uboot-imx
  • U-BOOT_BRANCH = imx_v2020.04_5.4.24_2.1.0_var02
  • U-BOOT_BOARD_NAME = imx8mm_var_dart
  • U-BOOT_DTB_DART = imx8mm-var-dart-customboard.dtb
  • U-BOOT_DTB_SOM = imx8mm-var-som-symphony.dtb
  • U-BOOT_DTB_SOM_10 = fsl-imx8mm-var-som-rev10.dtb
  • U-BOOT_OFFSET = 33
  • U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
  • U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
  • U-BOOT_EMMC_DEV = 2
  • U-BOOT_SD_DEV = 1
  • U-BOOT_UMS_DEV = 0
  • SDCARD_IMG_EXT = wic.gz
  • SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
  • SOC = mx8mm
  • SOC_SERIES = imx8
  • SOC_FAMILY = imx8m
  • SPL_SD_IMAGE_NAME = N/A
  • TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt6-sdk-imx8mm-var-dart.sh
  • TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/3.1
  • TOOLCHAIN_LOCATION = /opt/b2qt/3.1/environment-setup-aarch64-poky-linux
  • TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/3.1/sysroots/x86_64-pokysdk-linux
  • TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/3.1/sysroots/aarch64-poky-linux
  • TOOLCHAIN_TYPE = aarch64-poky-linux
  • YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
  • YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS_DUNFELL_V12
  • YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
  • YOCTO_NAME = Dunfell
  • YOCTO_VERSION = 3.1

VAR-SOM-MX8X

var-som-mx8x-b2qt-v1.0

var-som-mx8x-b2qt-v1.2

var-som-mx8x-b2qt-v2.0

var-som-mx8x-b2qt-v2.1

var-som-mx8x-b2qt-v2.2

VAR-SOM-MX8

var-som-mx8-b2qt-v1.0

var-som-mx8-b2qt-v1.1

Retrieved from "https://variwiki.com/index.php?title=B2QT_Platform_Customization&oldid=16261"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 30 March 2021, at 07:51.

© 2024 Variscite. All rights reserved