Debian Platform Customization: Difference between revisions
From Variscite Wiki
No edit summary |
|||
| Line 1,963: | Line 1,963: | ||
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx8m_var_dart_mmc_SECURE_BOOT_defconfig}} <!-- | -->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx8m_var_dart_mmc_SECURE_BOOT_defconfig}} <!-- | ||
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!-- | -->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!-- | ||
-->{{#vardefine:RECOVERY_SD_NAME|mx8mq-dart-debian- | -->{{#vardefine:RECOVERY_SD_NAME|mx8mq-dart-debian-recovery-sd.v31.img.gz}} <!-- | ||
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/debian}} <!-- | -->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/debian}} <!-- | ||
-->{{#vardefine:KERNEL_DTB_SECTION|DART-MX8M_DTB_BUSTER_PLUS}} <!-- | -->{{#vardefine:KERNEL_DTB_SECTION|DART-MX8M_DTB_BUSTER_PLUS}} <!-- | ||
Revision as of 11:57, 17 December 2020
Debian
Documentation
Stretch 9
- Debian 9 - Stretch (released on 06/17/2017)
Documentation is available from wiki.debian.org
VAR-SOM-MX6
Build Results
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| uImage | Linux kernel image |
| SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
| SPL.emmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
| u-boot.img.nand | U-Boot built for NAND flash |
| u-boot.img.mmc | U-Boot built for SD card or eMMC boot |
| Device Tree name |
Details |
| imx6dl-var-som-solo-cap.dtb | VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with capacitive touch |
| imx6dl-var-som-solo-res.dtb | VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with resistive touch |
| imx6dl-var-som-solo-vsc.dtb | VAR-SOM-SOLO with iMX6S/DL on SOLOCustomBoard with capacitive touch |
| imx6dl-var-som-cap.dtb | VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with capacitive touch |
| imx6dl-var-som-res.dtb | VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with resistive touch |
| imx6dl-var-som-vsc.dtb | VAR-SOM-MX6 with iMX6S/DL on SOLOCustomBoard with capacitive touch |
| imx6q-var-som-cap.dtb | VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with capacitive touch |
| imx6q-var-som-res.dtb | VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with resistive touch |
| imx6q-var-som-vsc.dtb | VAR-SOM-MX6 with iMX6D/Q on SOLOCustomBoard with capacitive touch |
| imx6qp-var-som-cap.dtb | VAR-SOM-MX6 with iMX6DP/QP on MX6CustomBoard with capacitive touch |
| imx6qp-var-som-res.dtb | VAR-SOM-MX6 with iMX6DP/QP on MX6CustomBoard with resistive touch |
| imx6qp-var-som-vsc.dtb | VAR-SOM-MX6 with iMX6DP/QP on SOLOCustomBoard with capacitive touch |
| imx6q-var-dart.dtb | DART-MX6 with iMX6D/Q on DARTCustomBoard with capacitive touch |
DART-6UL
Build Results
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| rootfs.ubi.img | Use for flash to NAND |
| zImage | Linux kernel image |
| SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
| SPL.emmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
| u-boot.img.nand | U-Boot built for NAND flash |
| u-boot.img.emmc | U-Boot built for SD card or eMMC |
| Device Tree name |
Details |
| imx6ul-var-dart-emmc_wifi.dtb | DART-6UL with eMMC and WiFi enabled. (SD card & NAND disabled) |
| imx6ul-var-dart-nand_wifi.dtb | DART-6UL with l NAND and WiFi enabled. (SD card & eMMC disabled) |
| imx6ul-var-dart-sd_emmc.dtb | DART-6UL with SD card and eMMC enabled (WiFi & NAND disabled). You can boot from eMMC or SD card |
| imx6ul-var-dart-sd_nand.dtb | DART-6UL with SD card and NAND enabled (WiFi & eMMC disabled). You can boot from NAND or SD card |
| imx6ul-var-dart-5g-emmc_wifi.dtb | DART-6UL-5G with eMMC and WiFi enabled. (SD card & NAND disabled) |
| imx6ul-var-dart-5g-nand_wifi.dtb | DART-6UL-5G with l NAND and WiFi enabled. (SD card & eMMC disabled) |
| imx6ull-var-dart-emmc_wifi.dtb | DART-6ULL with eMMC and WiFi enabled. (SD card & NAND disabled) |
| imx6ull-var-dart-nand_wifi.dtb | DART-6ULL with l NAND and WiFi enabled. (SD card & eMMC disabled) |
| imx6ull-var-dart-sd_emmc.dtb | DART-6ULL with SD card and eMMC enabled (WiFi & NAND disabled). You can boot from eMMC or SD card |
| imx6ull-var-dart-sd_nand.dtb | DART-6ULL with SD card and NAND enabled (WiFi & eMMC disabled). You can boot from NAND or SD card |
| imx6ull-var-dart-5g-emmc_wifi.dtb | DART-6ULL-5G with eMMC and WiFi enabled. (SD card & NAND disabled) |
| imx6ull-var-dart-5g-nand_wifi.dtb | DART-6ULL-5G with l NAND and WiFi enabled. (SD card & eMMC disabled) |
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| rootfs.ubi.img | Use for flash to NAND |
| zImage | Linux kernel image |
| SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
| SPL.mmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
| u-boot.img.nand | U-Boot built for NAND flash |
| u-boot.img.mmc | U-Boot built for SD card or eMMC |
| Device Tree name |
Details |
| imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
| imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
| imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
| imx6ull-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ull-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ull-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ull-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
| imx6ul-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ul-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ul-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ul-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
| imx6ulz-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ulz-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ulz-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ulz-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
SD card image file tree
/opt/images/
└── Debian
├── imx6ul-var-dart-5g-emmc_wifi.dtb
├── imx6ul-var-dart-5g-nand_wifi.dtb
├── imx6ul-var-dart-emmc_wifi.dtb
├── imx6ul-var-dart-nand_wifi.dtb
├── imx6ul-var-dart-sd_emmc.dtb
├── imx6ul-var-dart-sd_nand.dtb
├── imx6ull-var-dart-5g-emmc_wifi.dtb
├── imx6ull-var-dart-5g-nand_wifi.dtb
├── imx6ull-var-dart-emmc_wifi.dtb
├── imx6ull-var-dart-nand_wifi.dtb
├── imx6ull-var-dart-sd_emmc.dtb
├── imx6ull-var-dart-sd_nand.dtb
├── rootfs.tar.gz
├── rootfs.ubi.img
├── SPL.mmc
├── SPL.nand
├── u-boot.img.mmc
├── u-boot.img.nand
└── zImage
/opt/images/
└── Yocto
├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb
├── imx6ull-var-som-concerto-board-emmc-wifi.dtb
├── imx6ull-var-som-concerto-board-nand-sd-card.dtb
├── imx6ull-var-som-concerto-board-nand-wifi.dtb
├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb
├── imx6ul-var-som-concerto-board-emmc-wifi.dtb
├── imx6ul-var-som-concerto-board-nand-sd-card.dtb
├── imx6ul-var-som-concerto-board-nand-wifi.dtb
├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb
├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb
├── imx6ulz-var-som-concerto-board-nand-wifi.dtb
├── rootfs.tar.gz
├── rootfs.ubi.img
├── SPL.mmc
├── SPL.nand
├── u-boot.img.mmc
├── u-boot.img.nand
└── zImage
VAR-SOM-MX7
Build Results
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| rootfs.ubi.img | Use for flash to nand |
| zImage | Linux kernel image |
| SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
| SPL.emmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
| u-boot.img.nand | U-Boot built for NAND flash |
| u-boot.img.emmc | U-Boot built for SD card or eMMC boot |
| Device Tree name |
Details |
| imx7d-var-som-emmc.dtb | Boot from SD or eMMC |
| imx7d-var-som-nand.dtb | Boot from NAND |
| imx7d-var-som-emmc-m4.dtb | Boot from SD or eMMC with M4 support |
| imx7d-var-som-nand-m4.dtb | Boot from NAND with M4 support |
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| rootfs.ubi.img | Use for flash to nand |
| zImage | Linux kernel image |
| SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
| SPL.mmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
| u-boot.img.nand | U-Boot built for NAND flash |
| u-boot.img.mmc | U-Boot built for SD card or eMMC boot |
| Device Tree name |
Details |
| imx7d-var-som-emmc.dtb | Boot from SD or eMMC |
| imx7d-var-som-nand.dtb | Boot from NAND |
| imx7d-var-som-emmc-m4.dtb | Boot from SD or eMMC with M4 support |
| imx7d-var-som-nand-m4.dtb | Boot from NAND with M4 support |
DART-MX8M
Build Results
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| Image.gz | Linux kernel image |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC |
| Device Tree name |
Details |
| fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb | DART-MX8M with HDMI+LVDS, eMMC and WiFi (SD card disabled) |
| fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb | DART-MX8M with HDMI, eMMC and WiFi (SD card disabled) |
| fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb | DART-MX8M with LVDS, eMMC and WiFi (SD card disabled) |
| fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb | DART-MX8M with HDMI+LVDS, eMMC and SD (WiFi card disabled) |
| fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb | DART-MX8M with HDMI, eMMC and SD (WiFi card disabled) |
| fsl-imx8mq-var-dart-sd-emmc-lvds.dtb | DART-MX8M with LVDS, eMMC and SD (WiFi card disabled) |
The resulted images are located in /output/.
| Image name |
How to use | |
|---|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC | |
| Image.gz | Linux kernel image | |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC | |
| Device Tree name |
Details | |
| fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb | DART-MX8M with eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.(SD card disabled) | |
| fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb | DART-MX8M with eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher. (SD card disabled) | |
| fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb | DART-MX8M with eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. (SD card disabled) | |
| fsl-imx8mq-var-dart-emmc-wifi-hdmi-cb12.dtb | DART-MX8M with eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
| fsl-imx8mq-var-dart-emmc-wifi-lvds-cb12.dtb | DART-MX8M with eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
| fsl-imx8mq-var-dart-emmc-wifi-dual-display-cb12.dtb | DART-MX8M with eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
| fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb | DART-MX8M with SD, eMMC and HDMI display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
| fsl-imx8mq-var-dart-sd-emmc-lvds.dtb | DART-MX8M with SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
| fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb | DART-MX8M with SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
| fsl-imx8mq-var-dart-sd-emmc-hdmi-cb12.dtb | DART-MX8M with SD, eMMC and HDMI display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) | |
| fsl-imx8mq-var-dart-sd-emmc-lvds-cb12.dtb | DART-MX8M with SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) | |
| fsl-imx8mq-var-dart-sd-emmc-dual-display-cb12.dtb | DART-MX8M with SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) | |
| fsl-imx8mq-var-dart-m4-emmc-wifi-hdmi.dtb | DART-MX8M with M4 eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.(SD card disabled) | |
| fsl-imx8mq-var-dart-m4-emmc-wifi-lvds.dtb | DART-MX8M with M4 eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher. (SD card disabled) | |
| fsl-imx8mq-var-dart-m4-emmc-wifi-dual-display.dtb | DART-MX8M with M4 eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. (SD card disabled) | |
| fsl-imx8mq-var-dart-m4-emmc-wifi-hdmi-cb12.dtb | DART-MX8M with M4 eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
| fsl-imx8mq-var-dart-m4-emmc-wifi-lvds-cb12.dtb | DART-MX8M with M4 eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
| fsl-imx8mq-var-dart-m4-emmc-wifi-dual-display-cb12.dtb | DART-MX8M with M4 eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
| fsl-imx8mq-var-dart-m4-sd-emmc-hdmi.dtb | DART-MX8M with M4 SD, eMMC and HDMI display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
| fsl-imx8mq-var-dart-m4-sd-emmc-lvds.dtb | DART-MX8M with M4 SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
| fsl-imx8mq-var-dart-m4-sd-emmc-dual-display.dtb | DART-MX8M with M4 SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
| fsl-imx8mq-var-dart-m4-sd-emmc-hdmi-cb12.dtb | DART-MX8M with M4 SD, eMMC and HDMI display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) | |
| fsl-imx8mq-var-dart-m4-sd-emmc-lvds-cb12.dtb | DART-MX8M with M4 SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) | |
| fsl-imx8mq-var-dart-m4-sd-emmc-dual-display-cb12.dtb | DART-MX8M with M4 SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) |
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| Image.gz | Linux kernel image |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC |
| imx-boot-sd-dp.bin | U-Boot built for SD card and eMMC with DP firmware |
| Device Tree name |
Details |
| fsl-imx8mq-var-dart-sd-dp.dtb | DTB for eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-sd-hdmi.dtb | DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-sd-lvds.dtb | DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-sd-lvds-dp.dtb | DTB for eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb | DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-sd-hdmi-cb12.dtb | DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2. |
| fsl-imx8mq-var-dart-sd-lvds-cb12.dtb | DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2. |
| fsl-imx8mq-var-dart-sd-lvds-hdmi-cb12.dtb | DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. |
| fsl-imx8mq-var-dart-wifi-dp.dtb | DTB for eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-wifi-hdmi.dtb | DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-wifi-lvds.dtb | DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-wifi-lvds-dp.dtb | DTB for eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb | DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-wifi-hdmi-cb12.dtb | DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2. |
| fsl-imx8mq-var-dart-wifi-lvds-cb12.dtb | DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2. |
| fsl-imx8mq-var-dart-wifi-lvds-hdmi-cb12.dtb | DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. |
| fsl-imx8mq-var-dart-m4-sd-dp.dtb | DTB for M4, eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-m4-sd-hdmi.dtb | DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-m4-sd-lvds.dtb | DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb | DTB for M4, eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb | DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-m4-sd-hdmi-cb12.dtb | DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2. |
| fsl-imx8mq-var-dart-m4-sd-lvds-cb12.dtb | DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2. |
| fsl-imx8mq-var-dart-m4-sd-lvds-hdmi-cb12.dtb | DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. |
| fsl-imx8mq-var-dart-m4-wifi-dp.dtb | DTB for M4, eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb | DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-m4-wifi-lvds.dtb | DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb | DTB for M4, eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb | DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. |
| fsl-imx8mq-var-dart-m4-wifi-hdmi-cb12.dtb | DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2. |
| fsl-imx8mq-var-dart-m4-wifi-lvds-cb12.dtb | DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2. |
| fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi-cb12.dtb | DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. |
DART-MX8M-MINI
Build Results
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| Image.gz | Linux kernel image |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC |
| Device Tree name |
Details |
| fsl-imx8mm-var-dart.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration. |
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| Image.gz | Linux kernel image |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC |
| Device Tree name |
Details |
| fsl-imx8mm-var-dart.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration. |
| fsl-imx8mm-var-som.dtb | Device tree blob for VAR-SOM-MX8M-MINI, for SD, eMMC, WIFI and LVDS display configuration. |
| fsl-imx8mm-var-som-rev10.dtb | Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0 , for SD, eMMC, WIFI and LVDS display configuration. |
| fsl-imx8mm-var-dart-m4.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
| fsl-imx8mm-var-som-m4.dtb | Device tree blob for VAR-SOM-MX8M-MINI, for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
| fsl-imx8mm-var-som-rev10.dtb | Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0 , for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| Image.gz | Linux kernel image |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC |
| fw_printenv | U-Boot env tools for SD card and eMMC |
| Folder Name |
Usage |
| kernel-headers | kernel headers folder for package creation |
| Device Tree name |
Details |
| imx8mm-var-dart.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration. |
| imx8mm-var-som.dtb | Device tree blob for VAR-SOM-MX8M-MINI, for SD, eMMC, WIFI and LVDS display configuration. |
| imx8mm-var-som-rev10.dtb | Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0 , for SD, eMMC, WIFI and LVDS display configuration. |
| imx8mm-var-dart-m4.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
| imx8mm-var-som-m4.dtb | Device tree blob for VAR-SOM-MX8M-MINI, for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
| imx8mm-var-som-rev10.dtb | Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0 , for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
VAR-SOM-MX8X
Build Results
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| Image.gz | Linux kernel image |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC |
| Device Tree name |
Details |
| fsl-imx8qxp-var-som-wifi.dtb | Device tree blob for eMMC, WIFI and LVDS display configuration. |
| fsl-imx8qxp-var-som-sd.dtb | Device tree blob for SD, eMMC and LVDS display configuration. |
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| Image.gz | Linux kernel image |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC |
| imx-boot-sd-b0.bin | U-Boot built for Soc Rev B0 SD card and eMMC |
| Device Tree name |
Details |
| fsl-imx8qxp-var-som-wifi.dtb | Device tree blob for eMMC, WIFI and LVDS display configuration. |
| fsl-imx8qxp-var-som-sd.dtb | Device tree blob for SD, eMMC and LVDS display configuration. |
VAR-SOM-MX8
Build Results
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| Image.gz | Linux kernel image |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC |
| Device Tree name |
Details |
| fsl-imx8qm-var-som-dp.dtb | Device tree blob for VAR-SOM-MX8 with DP display |
| fsl-imx8qm-var-som-hdmi.dtb | Device tree blob for VAR-SOM-MX8 with HDMI display |
| fsl-imx8qm-var-som-lvds.dtb | Device tree blob for VAR-SOM-MX8 with LVDS display |
| fsl-imx8qm-var-spear-dp.dtb | Device tree blob for SPEAR-MX8 with DP display |
| fsl-imx8qm-var-spear-hdmi.dtb | Device tree blob for SPEAR-MX8 with HDMI display |
| fsl-imx8qm-var-spear-lvds.dtb | Device tree blob for SPEAR-MX8 with LVDS display |
VAR-SOM-MX8M-NANO
Build Results
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| Image.gz | Linux kernel image |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC |
| Device Tree name |
Details |
| fsl-imx8mn-var-som.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration. |
| fsl-imx8mn-var-som-rev10.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration rev 1.0. |
| fsl-imx8mn-var-som-m7.dtb | Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration. |
| fsl-imx8mn-var-som-rev10-m7.dtb | Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration rev 1.0. |
The resulted images are located in /output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| Image.gz | Linux kernel image |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC |
| kernel-headers | kernel headers folder for package creation |
| Device Tree name |
Details |
| imx8mn-var-som.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration. |
| imx8mn-var-som-rev10.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration rev 1.0. |
| imx8mn-var-som-m7.dtb | Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration. |
| imx8mn-var-som-rev10-m7.dtb | Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration rev 1.0. |
Release Notes
Platform Customizations
VAR-SOM-MX6
stretch-4.9.11-mx6-v1.0
stretch-4.9.88-mx6-v2.0
DART-6UL
stretch-4.9.11-mx6ul-v1.0
stretch-4.9.88-mx6ul-v2.0
stretch-4.14.78-mx6ul-v1.0
buster-4.14.78-mx6ul-v1.0
buster-4.14.78-mx6ul-v1.1
VAR-SOM-MX7
stretch-4.9.11-mx7-v1.0
stretch-4.9.88-mx7-v2.0
buster-4.14.78-mx7-v1.0
buster-4.14.78-mx7-v1.1
DART-MX8M
stretch-4.14.78-mx8m-v1.0
buster-4.14.78-mx8m-v2.0
buster-4.14.78-mx8m-v2.1
buster-4.14.78-mx8m-v2.2
buster-4.14.78-mx8m-v2.3
buster-4.19.35-mx8mq-v3.0
buster-4.19.35-mx8mq-v3.1
DART-MX8M-MINI
buster-4.14.78-mx8mm-v1.0
buster-4.14.78-mx8mm-v1.1
buster-4.14.78-mx8mm-v1.2
buster-4.14.78-mx8mm-v1.3
buster-4.19.35-mx8mm-v2.0
buster-4.19.35-mx8mm-v2.1
bullseye-5.4.3-mx8mm-v1.0
VAR-SOM-MX8X
buster-4.14.98-imx8qxp-v1.0
buster-4.14.98-imx8qxp-v1.1
buster-4.14.98-imx8qxp-v1.2
buster-4.14.98-imx8qxp-v1.3
buster-4.14.98-imx8qxp-v2.0
buster-4.14.98-imx8qxp-v2.1
buster-4.14.98-imx8qxp-v2.2
VAR-SOM-MX8
buster-4.14.98-var-som-imx8-v1.0
buster-4.14.98-var-som-imx8-v1.1
buster-4.14.98-var-som-imx8-v1.2
VAR-SOM-MX8M-NANO
buster-4.14.98-imx8mn-v1.0
buster-4.14.98-imx8mn-v1.1
bullseye-5.4.24-imx8mn-v1.0