Debian Edit Modify Build and Flash U-Boot: Difference between revisions
From Variscite Wiki
| Line 32: | Line 32: | ||
== Flashing New Bootloader to target eMMC via network == | == Flashing New Bootloader to target eMMC via network == | ||
Transfer the newly created bootloader file {{#var: | Transfer the newly created bootloader file | ||
{{#ifeq: {{#var:SOC_SERIES}}|imx8| | |||
{{#var:U-BOOT_SD_IMAGE_NAME}} | |||
| | |||
SPL and u-boot.img | |||
}} | |||
From | |||
{{#var:BUILD_FOLDER}}/output/ to running target to flash it on the eMMC. | {{#var:BUILD_FOLDER}}/output/ to running target to flash it on the eMMC. | ||
For example | For example | ||
scp {{#var:BUILD_FOLDER}}/output/{{#var:U- | {{#ifeq: {{#var:SOC_SERIES}}|imx8| | ||
$scp {{#var:BUILD_FOLDER}}/output/{{#var:U-BOOT_SD_IMAGE_NAME}} root@192.168.0.36:/tmp/ | |||
| | |||
$scp {{#var:BUILD_FOLDER}}/output/SPL root@192.168.0.36:/tmp/ | |||
$scp {{#var:BUILD_FOLDER}}/output/u-boot.img root@192.168.0.36:/tmp/ | |||
}} | |||
Change 192.168.0.36 to your target board IP. | Change 192.168.0.36 to your target board IP. | ||
{{#ifeq: {{#var:SOC_SERIES}}|imx8| | |||
dd if={{#var:U-BOOT_IMAGE_NAME}} of=/dev/{{#var:EMMC_ROOTFS_DEV}} bs=1K seek={{#var:U-BOOT_OFFSET}}; sync | <br> | ||
# dd if=/tmp/{{#var:U-BOOT_IMAGE_NAME}} of=/dev/{{#var:EMMC_ROOTFS_DEV}} bs=1K seek={{#var:U-BOOT_OFFSET}}; sync | |||
| | |||
# dd if=SPL of=/dev/{{#var:EMMC_ROOTFS_DEV}} bs=1K seek=1; sync | |||
# dd if=u-boot.img of=/dev/{{#var:EMMC_ROOTFS_DEV}} bs=1K seek=69; sync | |||
}} | |||
== Flashing New Bootloader to SD card. | == Flashing New Bootloader to SD card. | ||
Revision as of 06:42, 15 July 2020
DART-MX8M-MINI - Debian U-Boot Customization
Making Changes to U-Boot
$ cd ~/var_mx8mm_dart_debian_buster/src/uboot-imx $ gedit board/variscite/mx8mm_var_dart/mx8mm_var_dart.c $ gedit include/configs/mx8mm_var_dart.h
For example, we want to change the default environment variable,
"netargs=setenv bootargs ${jh_clk} console=${console} " \
"root=/dev/nfs ${cma_size} " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
To
"netargs=setenv bootargs ${jh_clk} console=${console} " \
"root=/dev/nfs ${cma_size} " \
"ip=dhcp serverip=192.168.0.34 nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
Here above example sets the serverip to 192.168.0.34,
Building Bootloader
To build a bootloader run below commands on host machine.
$ cd ~/var_mx8mm_dart_debian_buster $ sudo MACHINE=imx8mm-var-dart ./var_make_debian.sh -c bootloader
Flashing New Bootloader to target eMMC via network
Transfer the newly created bootloader file imx-boot-sd.bin
From
~/var_mx8mm_dart_debian_buster/output/ to running target to flash it on the eMMC.
For example $scp ~/var_mx8mm_dart_debian_buster/output/imx-boot-sd.bin root@192.168.0.36:/tmp/
Change 192.168.0.36 to your target board IP.
# dd if=/tmp/ of=/dev/mmcblk2 bs=1K seek=33; sync
== Flashing New Bootloader to SD card.
To flash the newly created bootloader on the SD Card
$ sudo dd if=imx-boot-sd.bin of=/dev/sdX bs=1K seek=33 conv=fsync
If you want to use our recovery SD card to flash the built U-Boot to NAND flash/eMMC, then copy it to the appropriate location in the SD card:
$ sudo cp SPL /media/rootfs/opt/images/Debian/... $ sudo cp u-boot.img /media/rootfs/opt/images/Debian/...
And eject the SD card gracefully from host machine.
Note: If you manually upgrade an existing U-Boot, and you have an old environment saved, it is a good idea to reset your environment to the new default (see Environment handling commands)