Android Customizing the Linux kernel: Difference between revisions
From Variscite Wiki
No edit summary |
No edit summary |
||
Line 38: | Line 38: | ||
$ sudo flash dtbo_a out/target/product/{{#var:ANDROID_MACHINE_NAME}}/dtbo-<name>.img | $ sudo flash dtbo_a out/target/product/{{#var:ANDROID_MACHINE_NAME}}/dtbo-<name>.img | ||
$ sudo flash vbmeta_a out/target/product/{{#var:ANDROID_MACHINE_NAME}}/vbmeta-<name>.img | $ sudo flash vbmeta_a out/target/product/{{#var:ANDROID_MACHINE_NAME}}/vbmeta-<name>.img | ||
Replace <name> with the actual desired setup name according to the table in the "images created by the Android build" section in the " | Replace <name> with the actual desired setup name according to the table in the {{Varlink|Android_NXP_Guide#Images_created_by_the_Android_build_for_Variscite_MX8M_system|{{#var:RELEASE_LINK}}|"images created by the Android build" section}} in the "Build Android from source code" page. | ||
}} | }} | ||
$ sudo fastboot reboot | $ sudo fastboot reboot |
Revision as of 13:26, 31 December 2019
VAR-SOM-MX6 - Android Nougat N7.1.1 - Customizing the Linux kernel
Making changes to kernel configuration
$ cd ~/var_n_711_100/n_711_100_build/vendor/variscite/kernel_imx/ $ make ARCH=arm mrproper $ make ARCH=arm imx_v7_var_android_defconfig $ make ARCH=arm menuconfig
Navigate the menu and select the desired kernel functionality Exit the menu and answer "Yes" when asked "Do you wish to save your new configuration?"
$ make ARCH=arm savedefconfig $ cp arch/arm/configs/imx_v7_var_android_defconfig arch/arm/configs/imx_v7_var_android_defconfig.orig $ cp defconfig arch/arm/configs/
Making changes to the device tree
Edit
- VAR-SOM-MX6 : arch/arm/boot/dts/imx6qdl-var-som.dtsi
- DART-MX6: arch/arm/boot/dts/imx6qdl-var-dart.dtsi
For example we want to make device tree changes for SPI configuration
Refer to: SPI
Build a new boot.img
When you perform changes to the kernel, you may build boot.img solely instead of building the whole Android.
$ cd ~/var_n_711_100/n_711_100_build $ source build/envsetup.sh $ lunch -userdebug $ make bootimage
Flashing the boot image to the target
Boot the device into fastboot mode by using below commands:
$ adb reboot bootloader $ fastboot flash bootout/target/product/var_mx6/boot-<setup-name>.img Replace setup-name as per above table. $ sudo fastboot reboot