DART-MX8M CSI: Difference between revisions
From Variscite Wiki
No edit summary |
No edit summary |
||
| Line 15: | Line 15: | ||
This should produce the following output | This should produce the following output | ||
{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M | | {{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M | | ||
<pre> | |||
# v4l2-ctl --list-devices | |||
i.MX6S_CSI (platform:30a90000.csi1_bridge): | |||
/dev/video0 | |||
i.MX6S_CSI (platform:30b80000.csi2_bridge): | |||
/dev/video1 | |||
</pre> | |||
As you can see above there are 2 cameras accessible as /dev/video0 and /dev/video1 | |||
| | | | ||
<pre> | |||
# v4l2-ctl --list-devices | |||
i.MX6S_CSI (platform:30a90000.csi1_bridge): | |||
/dev/video0 | |||
</pre> | |||
As you can see above there is 1 camera accessible as /dev/video0 | |||
}} | }} | ||
== Testing Camera Preview on Display == | == Testing Camera Preview on Display == | ||
| Line 35: | Line 38: | ||
* 480P 640x480@30fps: | * 480P 640x480@30fps: | ||
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=640,height=480 ! | # gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=640,height=480 ! autovideosink | ||
* NTSC 720x480@30fps: | * NTSC 720x480@30fps: | ||
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=720,height=480 ! | # gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=720,height=480 ! autovideosink | ||
* 720P 1280x720@30fps: | * 720P 1280x720@30fps: | ||
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=1280,height=720 ! | # gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=1280,height=720 ! autovideosink | ||
* 1080P: 1920x1080@30fps: | * 1080P: 1920x1080@30fps: | ||
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=1920,height=1080 ! | # gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=1920,height=1080 ! autovideosink | ||
* QSXGA 2592x1944@15fps: | * QSXGA 2592x1944@15fps: | ||
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=2592,height=1944 ! | # gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=2592,height=1944 ! autovideosink | ||
== Testing Camera JPEG Snapshot == | == Testing Camera JPEG Snapshot == | ||
| Line 68: | Line 71: | ||
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=2592,height=1944 ! jpegenc ! filesink location=/tmp/test.jpg | # gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=2592,height=1944 ! jpegenc ! filesink location=/tmp/test.jpg | ||
{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M | | |||
== Using both cameras simultaneously == | == Using both cameras simultaneously == | ||
| Line 75: | Line 79: | ||
# gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! jpegenc ! avimux ! filesink location=./test0.avi \ | # gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! jpegenc ! avimux ! filesink location=./test0.avi \ | ||
v4l2src device=/dev/video1 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! jpegenc ! avimux ! filesink location=./test1.avi | v4l2src device=/dev/video1 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! jpegenc ! avimux ! filesink location=./test1.avi | ||
| | |||
}} | |||
Revision as of 17:50, 26 February 2019
DART-MX8M - Camera
Testing MIPI-CSI2 cameras
Before running any of the pipelines below make sure you have camera(s) connected. i.MX family of processors uses gstreamer as multimedia framework. Please refer to https://gstreamer.freedesktop.org/
Camera Probe
Run the following command to see if you have the camera(s) detected
# v4l2-ctl --list-devices
This should produce the following output
# v4l2-ctl --list-devices
i.MX6S_CSI (platform:30a90000.csi1_bridge):
/dev/video0
As you can see above there is 1 camera accessible as /dev/video0
Testing Camera Preview on Display
In the examples below /dev/videoX is either /dev/video0 or /dev/video1
- 480P 640x480@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=640,height=480 ! autovideosink
- NTSC 720x480@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=720,height=480 ! autovideosink
- 720P 1280x720@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=1280,height=720 ! autovideosink
- 1080P: 1920x1080@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=1920,height=1080 ! autovideosink
- QSXGA 2592x1944@15fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=2592,height=1944 ! autovideosink
Testing Camera JPEG Snapshot
To capture JPEG snapshot run one of the pipelines below depending upon the required picture resolution.
- 480P 640x480:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=640,height=480 ! jpegenc ! filesink location=/tmp/test.jpg
- NTSC 720x480:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=720,height=480 ! jpegenc ! filesink location=/tmp/test.jpg
- 720P 1280x720:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=1280,height=720 ! jpegenc ! filesink location=/tmp/test.jpg
- 1080P 1920x1080:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=1920,height=1080 ! jpegenc ! filesink location=/tmp/test.jpg
- QSXGA 2592x1944:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=2592,height=1944 ! jpegenc ! filesink location=/tmp/test.jpg