Yocto Setup TFTP/NFS: Difference between revisions
From Variscite Wiki
(→Host) |
No edit summary |
||
Line 12: | Line 12: | ||
$ sudo mkdir rootfs | $ sudo mkdir rootfs | ||
$ cd rootfs | $ cd rootfs | ||
$ sudo tar xvf ../{{#var:BUILD_FOLDER_X11}}/tmp/deploy/images/{{#var:MACHINE_NAME}}/fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz | $ sudo tar xvf ../{{#varexists:BUILD_FOLDER_X11 | {{#var:BUILD_FOLDER_X11}} | {{#var:BUILD_FOLDER_XWAYLAND}} }}/tmp/deploy/images/{{#var:MACHINE_NAME}}/fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz | ||
<pre> | <pre> | ||
$ sudo gedit /etc/exports | $ sudo gedit /etc/exports |
Revision as of 18:53, 10 November 2019
- Yocto Setup TFTP/NFS
Running Yocto rootfs on Variscite board using TFTP & NFS
Host
Make sure you installed NFS server:
$ sudo apt-get install nfs-kernel-server $ cd $ sudo mkdir rootfs $ cd rootfs $ sudo tar xvf ..//tmp/deploy/images//fsl-image-gui-.tar.gz
$ sudo gedit /etc/exports
Add the following line (change <uname> to the name of user):
/rootfs *(rw,sync,no_root_squash,no_all_squash,no_subtree_check)
exit & save
$ sudo /etc/init.d/nfs-kernel-server restart
Make sure you installed TFTP server:
$ sudo apt-get install xinetd tftpd tftp Verify: $ ls /usr/sbin/in.tftpd $ sudo gedit /etc/xinetd.d/tftp service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = /tftpboot disable = no }
$ sudo mkdir /tftpboot $ sudo chmod -R 777 /tftpboot $ sudo /etc/init.d/xinetd restart $ cd // $ cp tmp/deploy/images// /tftpboot $ cp tmp/deploy/images//-imx*.dtb /tftpboot $ sudo rename 's/-//' /tftpboot/-*.dtb
Target
Make sure you have a serial connection to the target.
Reset and hold the space bar. This will bring you to U-Boot command line.
$ setenv serverip 192.168.1.188 $ setenv nfsroot /rootfs (change <uname> to the name of user) $ setenv bootcmd run netboot $ saveenv
You are all set. Connect Ethernet cable, power cycle the and it should boot over NFS.