Yocto Qt5 Toolchain installation: Difference between revisions

Latest revision as of 20:44, 13 January 2023

Warning: This page is designed to be used with a 'release' URL parameter.

This page is using the default release RELEASE_MORTY_V1.0_DART-6UL.
To view this page for a specific Variscite SoM and software release, please follow these steps:

Visit variwiki.com
Select your SoM
Select the software release

DART-6UL - Yocto Qt5 Toolchain Installation

Pre Requirements

Full Yocto OpenEmbedded environment is required for the toolchain generation.
To setup Yocto build environment follow steps 1 & 3 of the Build Yocto from source code guide and then proceed to the toolchain build below:

Build Toolchain

$ cd ~/var-fslc-yocto
$ MACHINE=imx6ul-var-dart DISTRO=fslc-x11 . setup-environment build_x11

$  bitbake meta-toolchain-qt5

The output will be located at tmp/deploy/sdk/.

Install Toolchain

Install the tools by running it:

$ tmp/deploy/sdk/fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh

Reply to all defaults 'y'
At the end of the installation you should see the following:

SDK has been successfully set up and is ready to be used.

The toolchain name depend on your build machine and may change

Use Toolchain

Each time you wish to use the toolchain in a new shell session, you need to source the environment setup script:

$ source /opt/fslc-x11/2.2.1/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi

@@ Line 1: / Line 1: @@
-<!-- Set release according to "release" parameter in URL and use MORTY_BETA_DART-6UL as default
+{{Yocto_Qt_Toolchain_installation}}
---> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!--
---> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM|RELEASE_MORTY_BETA_DART-6UL}}}} <!--
---> {{PageHeader|{{#var:HARDWARE_NAME}} - Yocto QT5 Toolchain Installation}} {{DocImage|category1=Yocto|category2={{#var:HARDWARE_NAME}}}} __toc__
-== Pre Requirements ==
+__NUMBEREDHEADINGS__
-Full Yocto OpenEmbedded environment is required for the toolchain generation.<br>
-To setup Yocto build environment follow steps 1 & 3 of the {{Varlink|Yocto_Build_Release|{{#var:RELEASE_LINK}}|Build Yocto from source code}} guide and then proceed to the toolchain build below:
-== Build Toolchain ==
- $ cd {{#var:BUILD_FOLDER}}
- $ MACHINE={{#var:MACHINE_NAME}} DISTRO={{#var:BUILD_DISTRO}} {{#var:$BUILD_SCRIPT}} {{#var:BUILD_FOLDER_X11}}
- $ bitbake meta-toolchain-qt5
-The output will be located at tmp/deploy/sdk/.
-== Install Toolchain ==
-Install the tools by running it:
- $ tmp/deploy/sdk/{{#var:TOOLCHAIN_INSTALL_X11_NAME}}
-Reply to all defaults 'y'<br>
-At the end of the installation you should see the following:
-<pre>
-SDK has been successfully set up and is ready to be used.
-</pre>
-{{Note|The toolchain name depend on your build machine and may change}}
-== Use Toolchain ==
-Each time you wish to use the toolchain in a new shell session, you need to source the environment setup script:
- $ source {{#var:TOOLCHAIN_LOCATION}}