Recovery SD card general: Difference between revisions

Latest revision as of 09:00, 12 September 2024

Write the image to an SD card

During the SD card image writing all files and partitions are erased from target device.
Double check that the device is correct to avoid accidentally overwriting a different device and potentially damaging your existing operating system.

Using a Linux based host

Plug-in the SD card to your Linux host PC, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblkX)

$ sudo umount /dev/sdX?*

# For  files:
$  <image name>. | sudo dd of=/dev/sdX bs=1M && sync

(Replace /dev/sdX with your actual device)

Using a Windows based host

Download Win32 Disk Imager from: https://sourceforge.net/projects/win32diskimager/ and install it.
Extract the downloaded image:
- For extracting a .gz file the latest 7-Zip can be used, for example.
- For extracting a .zst file the latest WinRAR can be used, for example.
Insert your SD card into your PC.
No need to format the SD card before writing the image to it, as the card will be formatted once it will be flashed.
Run the file named Win32DiskImager.exe (in Windows 7, 8 and 10 we recommend that you right-click this file and choose “Run as administrator”).
If the SD card (Device) you are using isn’t found automatically. Click on the drop down box and select it.
In the Image File box, choose the .img/.wic file you have extracted previously.
Click Write.
After a few minutes, you receive a notification that your SD has been created successfully.

Using a Mac OS X host

Use the dd Utility for MAC OS X to flash .img/.wic files to your SD card

@@ Line 1: / Line 1: @@
 == Write the image to an SD card ==
-{{note| During the SD card image writing all files and partitions are erased from target device.<br> Double check that the device is correct to avoid accidentally overwriting a different device and potentially damage your existing operating system}}
+{{note| During the SD card image writing all files and partitions are erased from target device.<br> Double check that the device is correct to avoid accidentally overwriting a different device and potentially damaging your existing operating system.}}
 === Using a Linux based host ===
-Plug-in the SD card to your Linux HOST PC, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblkX)
+Plug-in the SD card to your Linux host PC, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblkX)
-<pre>
-$ sudo umount /dev/sdX*
-$ zcat <image name>.img.gz  | sudo dd of=/dev/sdX bs=1M
-(Replace /dev/sdX with your actual device)
+ $ sudo umount /dev/sdX?*
-</pre>
+ # For {{#var:UNZIP_EXT}} files:
+ $ {{#var:UNZIP}} <image name>.{{#var:UNZIP_EXT}} | sudo dd of=/dev/sdX bs=1M && sync
+ (Replace /dev/sdX with your actual device)
 === Using a Windows based host ===
 * Download Win32 Disk Imager from: https://sourceforge.net/projects/win32diskimager/ and install it.
-* Extract downloaded <image name>.img.gz file  to get <image name>.img (using [http://www.7-zip.org/ 7-Zip] for example)
+* Extract the downloaded image:
+** For extracting a .gz file the latest [http://www.7-zip.org/ 7-Zip] can be used, for example.
+** For extracting a .zst file the latest  [https://www.rarlab.com/download.htm WinRAR] can be used, for example.
 * Insert your SD card into your PC. <br>No need to format the SD card before writing the image to it, as the card will be formatted once it will be flashed.
-* Run the file named Win32DiskImager.exe (in Windows 7,8 and 10 we recommend that you right-click this file and choose “Run as administrator”).
+* Run the file named Win32DiskImager.exe (in Windows 7, 8 and 10 we recommend that you right-click this file and choose “Run as administrator”).
-* If the SD card (Device) you are using isn’t found automatically. Click on the drop down box and select it
+* If the SD card (Device) you are using isn’t found automatically. Click on the drop down box and select it.
-* In the Image File box, choose the <image name>.img file you have extracted previously
+* In the Image File box, choose the .img/.wic file you have extracted previously.
-* Click Write
+* Click Write.
 * After a few minutes, you receive a notification that your SD has been created successfully.
-=== Using a Mac OS/X host ===
+=== Using a Mac OS X host ===
-You can use the [https://www.thefanclub.co.za/how-to/dd-utility-write-and-backup-operating-system-img-files-memory-card-mac-os-x OSX DD Tool] to flash .img files onto your SD card
+Use the [https://www.thefanclub.co.za/how-to/dd-utility-write-and-backup-operating-system-img-files-memory-card-mac-os-x dd Utility for MAC OS X] to flash .img/.wic files to your SD card