DART-6UL Debian Jessie MX6UL R2

DART-6UL - Debian Jessie release R2

Overview

This page describes how to assemble and install debian distro (jessie) on Variscite board mx6ul-var-dart.

This instruction was tested with Debian 8.4 x64 (jessie) and Ubuntu 14.04/16.04 x64! When using other distributions, there may be problems.

Create build environment

Installing required packages

Debian jessie x64

If your system does not have "sudo", set the "sudo" using the link: [1]

On your Debian building machine:

$ sudo apt-get install -y binfmt-support qemu qemu-user-static debootstrap kpartx
$ sudo apt-get install -y lvm2 dosfstools gpart binutils git lib32ncurses5-dev python-m2crypto
$ sudo apt-get install -y gawk wget git-core diffstat unzip texinfo gcc-multilib build-essential chrpath socat libsdl1.2-dev
$ sudo apt-get install -y autoconf libtool libglib2.0-dev libarchive-dev
$ sudo apt-get install -y python-git xterm sed cvs subversion coreutils texi2html bc
$ sudo apt-get install -y docbook-utils python-pysqlite2 help2man make gcc g++ desktop-file-utils libgl1-mesa-dev
$ sudo apt-get install -y libglu1-mesa-dev mercurial automake groff curl lzop asciidoc u-boot-tools mtd-utils

Ubuntu 14.04/16.04 x64

On your Ubuntu building machine:

$ sudo apt-get install -y binfmt-support qemu qemu-user-static debootstrap kpartx
$ sudo apt-get install -y lvm2 dosfstools gpart binutils git lib32ncurses5-dev python-m2crypto
$ sudo apt-get install -y gawk wget git-core diffstat unzip texinfo gcc-multilib build-essential chrpath socat libsdl1.2-dev
$ sudo apt-get install -y autoconf libtool libglib2.0-dev libarchive-dev
$ sudo apt-get install -y python-git xterm sed cvs subversion coreutils texi2html bc
$ sudo apt-get install -y docbook-utils python-pysqlite2 help2man make gcc g++ desktop-file-utils libgl1-mesa-dev
$ sudo apt-get install -y libglu1-mesa-dev mercurial automake groff curl lzop asciidoc u-boot-tools mtd-utils

Deploy source

Download archive contains the build script and support files for building Debian (Jessie) for this board:

$ cd ~
$ git clone https://github.com/varigit/debian-var.git -b debian_jessie_mx6ul_var02 var_mx6ul_dart_debian

Create environment (Internet connection should be available):

$ cd ~/var_mx6ul_dart_debian
$ ./make_var_mx6ul_dart_debian.sh -c deploy

This environment prepared to build.

Make Debian

Build all

Internet connection should be available

$ cd ~/var_mx6ul_dart_debian
$ sudo ./make_var_mx6ul_dart_debian.sh -c all | tee 2.log

Build by parts

Build rootfs

Internet connection should be available

$ cd ~/var_mx6ul_dart_debian
$ sudo ./make_var_mx6ul_dart_debian.sh -c rootfs

Build kernel, dtb files and kernel modules

$ cd ~/var_mx6ul_dart_debian
$ sudo ./make_var_mx6ul_dart_debian.sh -c kernel
$ sudo ./make_var_mx6ul_dart_debian.sh -c modules

Build bootloader

$ cd ~/var_mx6ul_dart_debian
$ sudo ./make_var_mx6ul_dart_debian.sh -c bootloader

Pack rootfs

For the create archive root file system (rootfs.tar.bz2) and image ubi (rootfs.ubi.img) run the following commands:

$ cd ~/var_mx6ul_dart_debian
$ sudo ./make_var_mx6ul_dart_debian.sh -c rtar
$ sudo ./make_var_mx6ul_dart_debian.sh -c rubi

Create boot SD card

1. Follow the steps for make rootfs, kernel, bootloader: go;
2. Insert the SD card to card reader connected to a host system;
3. Run the following commands (Caution! All data on the card will be destroyed):

$ cd ~/var_mx6ul_dart_debian
$ sudo ./make_var_mx6ul_dart_debian.sh -c sdcard -d /dev/sdX

where '/dev/sdX' path to the block SD device in your system.

Successful process log

I: Flashing U-Boot
35+0 records in
35+0 records out
35840 bytes (36 kB) copied, 0.0773679 s, 463 kB/s
237+1 records in
237+1 records out
243104 bytes (243 kB) copied, 0.720032 s, 338 kB/s
I: Flashing "BOOT-VARSOM" partition
I: Flashing "rootfs" partition
I: Copying Debian images to /opt/images/Debian
I: Copying NAND U-Boot to /opt/images/Debian
I: Copying MMC U-Boot to /opt/images/Debian
I: Copying scripts to /opt/images/Debian
I: Sync sdcard...
I: Done make sdcard!
I: 
I: Command: "sdcard" end. Exit code: 0
I: 

Boot board with a bootable SD card

Note: Boot from SD card eliminates Wifi as the Wifi and SD card are using same SDIO interface.
A typical use-case, is to boot from SD card, flash eMMC or NAND flash, and re-boot form eMMC/NAND flash to have Wi-Fi operational.

Setting board dip-switches

Booting your system requires switching the relevant dip-switch to "Boot from SD card". See picture below.

• "00" - Boot from SD card - The picture mode
• "01" - Boot from eMMC
• "10" - Boot from NAND flash
• "11" is illegal.

Be aware that your SOM has either eMMC or NAND flash but never both !

To boot board with SD card, Follow the steps below:

• Power-off the board.
• Insert the SD card into the SD/MMC slot of the carrier board (DVK)
• Switch the relevant dip-switch to "Boot from SD card"
• Power-up board
• The board will automatically boot into Linux from SD card

Automatic device Tree selection in U-Boot

Upon reset you will see the U-BOOT-SPL printouts. It will print also the SOM configuration:
On-SOM storage: SD only, eMMC, NAND.
WIFI if chip exits.
For example:

U-Boot SPL 2015.10-00532-g482dc88 (Jan 03 2016 - 10:05:42)
i.MX6UL SOC 
Part number: DART-6U-A01
Assembly: AS11
Date of production: 2015 Dec 31
DART-6UL configuration: eMMC WIFI
Ram size: 512
Boot Device: SD

As explained in the above Build Results table we have 4 optional configurations.
We implemented in U-BOOT and automatic device tree selection, so when kernel boots, the u-boot will load the corresponding device tree according to On-SOM configuration.

Boot From	SOM Internal FLASH	SOM has WIFI/BT	Device Tree selected
SD	eMMC	Don't Care	imx6ul-var-dart-sd_emmc.dtb
SD	NAND	Don't Care	imx6ul-var-dart-sd_nand.dtb
eMMC	eMMC	Yes	imx6ul-var-dart-emmc_wifi.dtb
eMMC	eMMC	NO	imx6ul-var-dart-sd_emmc.dtb
NAND	NAND	YES	imx6ul-var-dart-nand_wifi.dtb
NAND	NAND	NO	imx6ul-var-dart-sd_nand.dtb

Note: Boot from SD card eliminates Wifi as the Wifi and SD card are using same SDIO interface.
A typical use-case, is to boot from SD card, flash eMMC or NAND flash, and re-boot form eMMC/NAND flash to have Wi-Fi operational.

Disable Automatic Device Tree selection

To disable the automatic device tree selection in u-boot:

> setenv var_auto_fdt_file N
> saveenv

Now you can set the device tree to meet your requirments. For example:

> setenv fdt_file imx6ul-var-dart-sd_emmc.dtb
> saveenv

Will select device tree that has SD and eMMC regardless if the SOM has WIFI.

> setenv fdt_file imx6ul-var-dart-sd_nand.dtb
> saveenv

Will select device tree that has SD and NAND flash regardless if the SOM has WiFi.

Comment:
Make sure you don't set am illegal value like "imx6ul-var-dart-sd_nand.dtb" in a SOM that has eMMC flash.

Build Results

The resulted images are located in ~/var_mx6ul_dart_debian/output/.

Image Name	How to use
rootfs.tar.bz2	Used to create sdcard and rootfs.ubi.img
rootfs.ubi.img	Use for flash to nand
zImage	Linux kernel image
SPL-nand	SPL built for NAND flash. The SPL is pre-u-boot SW component, required for DDR initialization
SPL-emmc	SPL built for SD card and eMMC boot. The SPL is pre-u-boot SW component, required for DDR initialization
u-boot.bin.nand	U-Boot built for NAND flash.
u-boot.bin.emmc	u-boot built for SD card boot, or eMMC boot in case of DART-MX6UL.
Device Tree Name	Boot Device
imx6ul-var-dart-emmc_wifi.dtb	Boot from internal eMMC with WiFi enabled. (SD card & NAND flash disabled)
imx6ul-var-dart-nand_wifi.dtb	Boot from internal NAND flash with WiFi enabled. (SD card & eMMC disabled)
imx6ul-var-dart-sd_emmc.dtb	SD card and eMMC enabled (WiFi & NAND disabled). You can boot from eMMC or SD card
imx6ul-var-dart-sd_nand.dtb	SD card and NAND flash enabled (WiFi & eMMC disabled). You can boot from NAND flash or SD card

Linux console access

User name	User password	User descriptor
root	root	system administrator
user	user	local user
xuser		used for X session access

Flash images to NAND flash and eMMC

To flash images on NAND flash, on the device, as root, run the following command:

# debian-nand.sh

If you wanr to flash images on eMMC, on the device, as root, run the following command:

# debian-emmc.sh

Both the above commands are located in /usr/bin folder of uSD card used to boot debian.

How-to: Test and use an Interface

Please see this section in the Yocto developer guide page. It is the same for Debian.

How-to: Modify kernel configuration

To modify kernel configuration (add/remove features and drivers) please follow the steps below:

1. cd ~/var_mx6ul_dart_debian/src/kernel
2. Run "sudo make ARCH=arm mrproper"
3. Run "sudo make ARCH=arm imx6ul-var-dart_defconfig"
4. Run "sudo make ARCH=arm menuconfig"
5. Navigate the menu and select the desired kernel functionality
6. Exit the menu and answer "Yes" when asked "Do you wish to save your new configuration?"
7. Run "sudo make ARCH=arm savedefconfig"
8. Run "sudo cp arch/arm/configs/imx6ul-var-dart_defconfig arch/arm/configs/imx6ul-var-dart_defconfig.orig
9. Run "sudo cp defconfig arch/arm/configs/imx6ul-var-dart_defconfig
10. Follow the instructions above to rebuild kernel and modules, repack rootfs images and recreate SD card