VAR-SOM-MX6 Yocto Utilizing: Difference between revisions

From Variscite Wiki
 
(4 intermediate revisions by 2 users not shown)
Line 7: Line 7:


Make sure you installed NFS server:  
Make sure you installed NFS server:  
<pre>$ sudo apt-get install nfs-kernel-server
<pre>
$ cd ~/var-som-mx6-yocto-fido
$ sudo apt-get install nfs-kernel-server
$ sudo mkdir rootfs
$ cd ~
$ mkdir rootfs
$ cd rootfs
$ cd rootfs
$ sudo tar xvf  ../build_x11/tmp/deploy/images/var-som-mx6/fsl-image-qt5-var-som-mx6.tar.bz2 </pre>
$ sudo tar xvf  ~/var-imx-yocto-krogoth/build_x11/tmp/deploy/images/var-som-mx6/fsl-image-gui-var-som-mx6.tar.bz2
<pre>$ sudo gedit /etc/exports </pre>  
</pre>
add (change <uname> to the name of user):  
<pre>
$ sudo gedit /etc/exports
</pre>  
Add the following line (change <uname> to the name of user):  


/home/&lt;uname&gt;/var-som-mx6-yocto-fido/rootfs *(rw,sync,no_root_squash,no_all_squash,no_subtree_check)  
/home/&lt;uname&gt;/rootfs   *(rw,sync,no_root_squash,no_all_squash,no_subtree_check)  


exit &amp; save  
exit &amp; save  
<pre>$ sudo /etc/init.d/nfs-kernel-server restart</pre>  
<pre>
$ sudo /etc/init.d/nfs-kernel-server restart
</pre>  
Make sure you installed TFTP server:  
Make sure you installed TFTP server:  
<pre>$ sudo apt-get install xinetd tftpd tftp
<pre>
$ sudo apt-get install xinetd tftpd tftp
Verify:
Verify:
$ ls /usr/sbin/in.tftpd
$ ls /usr/sbin/in.tftpd
Line 38: Line 45:
$ sudo chmod -R 777 /tftpboot
$ sudo chmod -R 777 /tftpboot
$ sudo /etc/init.d/xinetd restart
$ sudo /etc/init.d/xinetd restart
$ cd ~/var-som-mx6-yocto-fido/build_x11/
</pre>
$ cp tmp/deploy/images/var-som-mx6/uImage /tftpboot
<pre>
$ cp tmp/deploy/images/var-som-mx6/uImage-imx6dl-var-som.dtb /tftpboot/imx6dl-var-som.dtb
$ sudo cp ~/var-imx-yocto-krogoth/build_x11/tmp/deploy/images/var-som-mx6/uImage /tftpboot
$ cp tmp/deploy/images/var-som-mx6/uImage-imx6dl-var-som-solo.dtb /tftpboot/imx6dl-var-som-solo.dtb
$ sudo cp ~/var-imx-yocto-krogoth/build_x11/tmp/deploy/images/var-som-mx6/uImage-imx*.dtb /tftpboot/
$ cp tmp/deploy/images/var-som-mx6/uImage-imx6dl-var-som-solo-vsc.dtb /tftpboot/imx6dl-var-som-solo-vsc.dtb
$ sudo rename 's/uImage-//' /tftpboot/uImage-*
$ cp tmp/deploy/images/var-som-mx6/uImage-imx6q-var-dart.dtb /tftpboot/var-dart.dtb
$ cp tmp/deploy/images/var-som-mx6/uImage-imx6q-var-som.dtb /tftpboot/imx6q-var-som.dtb
$ cp tmp/deploy/images/var-som-mx6/uImage-imx6q-var-som-vsc.dtb /tftpboot/imx6q-var-som-vsc.dtb
</pre>
</pre>


== Target  ==
== Target  ==


make sure you have a serial connection to the target.  
Make sure you have a serial connection to the target.  


reset and hold the space bar. This will bring you to U-Boot prompt
Reset and hold the space bar. This will bring you to U-Boot command line.
<pre>$ setenv serverip 192.168.1.188
<pre>
$ setenv uimage uImage
$ setenv serverip 192.168.1.188
$ setenv console ttymxc0
$ setenv nfsroot /home/&lt;uname&gt;/rootfs
$ setenv nfsroot /home/&lt;uname&gt;/var-som-mx6-yocto-fido/rootfs
(change <uname> to the name of user)
$ setenv bootcmd run netboot
$ setenv bootcmd run netboot
$ saveenv </pre>  
$ saveenv </pre>  
You are all set. Pushing reset on the VAR-SOM-MX6 board will run your Yocto result file system.<br>  
You are all set. Pushing reset on the VAR-SOM-MX6 board will run your Yocto result file system.<br>  
<br>
<br>

Latest revision as of 14:39, 12 June 2017

Setup TFTP/NFS Yocto system

Running Yocto rootfs on Variscite board using TFTP & NFS

Host

Make sure you installed NFS server:

$ sudo apt-get install nfs-kernel-server
$ cd ~
$ mkdir rootfs
$ cd rootfs
$ sudo tar xvf  ~/var-imx-yocto-krogoth/build_x11/tmp/deploy/images/var-som-mx6/fsl-image-gui-var-som-mx6.tar.bz2
$ sudo gedit /etc/exports

Add the following line (change <uname> to the name of user):

/home/<uname>/rootfs    *(rw,sync,no_root_squash,no_all_squash,no_subtree_check) 

exit & save

$ sudo /etc/init.d/nfs-kernel-server restart

Make sure you installed TFTP server:

$ sudo apt-get install xinetd tftpd tftp
Verify:
$ ls /usr/sbin/in.tftpd
$ sudo gedit /etc/xinetd.d/tftp
service tftp
{
protocol = udp
port = 69
socket_type = dgram
wait = yes
user = nobody
server = /usr/sbin/in.tftpd
server_args = /tftpboot
disable = no
}
$ sudo mkdir /tftpboot
$ sudo chmod -R 777 /tftpboot
$ sudo /etc/init.d/xinetd restart
$ sudo cp ~/var-imx-yocto-krogoth/build_x11/tmp/deploy/images/var-som-mx6/uImage /tftpboot
$ sudo cp ~/var-imx-yocto-krogoth/build_x11/tmp/deploy/images/var-som-mx6/uImage-imx*.dtb /tftpboot/
$ sudo rename 's/uImage-//' /tftpboot/uImage-*

Target

Make sure you have a serial connection to the target.

Reset and hold the space bar. This will bring you to U-Boot command line.

$ setenv serverip 192.168.1.188
$ setenv nfsroot /home/<uname>/rootfs
(change <uname> to the name of user)
$ setenv bootcmd run netboot
$ saveenv 

You are all set. Pushing reset on the VAR-SOM-MX6 board will run your Yocto result file system.