VAR-SOM-MX6 Ubuntu NAND Recovery: Difference between revisions

Latest revision as of 06:51, 19 January 2016

VAR-SOM-MX6 - Ubuntu Linaro Alip-20151215 NAND Recovery

Note:
Under construction!!! Under construction!!! Under construction!!!

Variscite provides a recovery SD-card image that can be used to install the pre-built U-Boot, Linux kernel and the eMMC root file system into the Nand-Flash This SD card image includes a script (ub-emmc.sh) that installs all the boot images and root file-system.

Preparing rescue SD-Card:

Plug-in the supplied SD card to your Linux HOST PC, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblk0)
Download linaro-alip-20151215-v3.img.gz ( latest which is available on Variscite's FTP)

$ gunzip linaro-alip-20151215-v3.img.gz
$ sudo dd if=linaro-alip-20151215-v3.img of=/dev/sdX bs=1M
Replace /dev/sdX with your true device, You can find it with dmesg.

Recover Nand Flash

Power-off the board.
Insert the SD card into the SD/MMC slot of the carrier board (DVK)
Press and hold the boot-select button, and power-on the board while button is pressed
The board will automatically boot into Linux from SD-Card

Flash from command line

System is at aluologin mode no password required/
From Linux command line, type one of flash options

$ cd rootfs/opt/images/Alip/
$ ./ub-emmc.sh

in case of yocto-emmc.sh, change boot arguments to :

$ setenv bootargs console=ttymxc0,115200 video=mxcfb1:off root=/dev/mmcblk1p1 rootwait rw
$ saveenv

SDCARD image file tree

opt/
└── images
    └── Alip
        ├── imx6dl-var-som.dtb
        ├── imx6dl-var-som-solo.dtb
        ├── imx6dl-var-som-solo-vsc.dtb
        ├── imx6q-var-dart.dtb
        ├── imx6q-var-som.dtb
        ├── imx6q-var-som-vsc.dtb
        ├── linaro-alip-20151215-v3.tar.bz2
        ├── mmcblk1p1
        ├── SPL
        ├── ub-emmc.sh
        ├── u-boot.img
        └── uImage

3 directories, 11 files

@@ Line 1: / Line 1: @@
+{{PageHeader|VAR-SOM-MX6 - Ubuntu Linaro Alip-20151215 NAND Recovery}} {{DocImage|category1=VAR-SOM-MX6|category2=Alip}} __toc__
+{{note|Note:<br/>Under construction!!! Under construction!!! Under construction!!!|info}}
 Variscite provides a recovery SD-card image that can be used to install the pre-built U-Boot, Linux kernel and the eMMC root  file system into the Nand-Flash
 This SD card image includes a script (ub-emmc.sh) that installs all the boot images and root file-system.
@@ Line 5: / Line 9: @@
 * Plug-in the supplied SD card to your Linux HOST PC, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblk0)
-* Download linaro-alip-20151215-v2.img.gz ( latest which is available on Variscite's FTP)
+* Download linaro-alip-20151215-v3.img.gz ( latest which is available on Variscite's FTP)
-<pre>$ gunzip linaro-alip-20151215-v2.img.gz
+<pre>$ gunzip linaro-alip-20151215-v3.img.gz
-$ sudo dd iflinaro-alip-20151215-v2.img of=/dev/sdX bs=128k
+$ sudo dd if=linaro-alip-20151215-v3.img of=/dev/sdX bs=1M
 Replace /dev/sdX with your true device, You can find it with dmesg.
 </pre>
@@ Line 42: / Line 46: @@
          ├── imx6q-var-som.dtb
          ├── imx6q-var-som-vsc.dtb
-         ├── linaro-alip-20151215-v2.tar.bz2
+         ├── linaro-alip-20151215-v3.tar.bz2
          ├── mmcblk1p1
          ├── SPL