VAR-SOM-AM33 Start Here: Difference between revisions
From Variscite Wiki
No edit summary |
|||
| (13 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
[[File:Yocto.png|x300px]] | [[File:Yocto.png|x300px]] | ||
= Step One: Read Documentations = | = Step One: Read Documentations = | ||
Please download and read the development kit documentation. on Variscite website: | Please download and read the development kit documentation. on Variscite website:<br> | ||
http://www.variscite.com/products/system-on-module-som/cortex-a8/var-som-am33-cpu-ti-am335x-am3354-am3352 <br> | http://www.variscite.com/products/system-on-module-som/cortex-a8/var-som-am33-cpu-ti-am335x-am3354-am3352 <br> | ||
{{note| NOTE:<br>Make sure you read the Quick Start Guide.|info}} | {{note| NOTE:<br>Make sure you read the Quick Start Guide.|info}} | ||
| Line 16: | Line 16: | ||
{{note| IMPORTANT:<br>Don't continue without the serial console operating.|info}} | {{note| IMPORTANT:<br>Don't continue without the serial console operating.|info}} | ||
= Step Four: A quick test with NAND recovery SD | = Step Four: A quick test with NAND recovery SD card= | ||
Please follow the below guide to boot DVK with a bootable SD | Please follow the below guide to boot DVK with a bootable SD card , and burn a complete yocto into NAND-Flash | ||
* [[VAR-SOM- | * [[VAR-SOM-AM33 Yocto NAND Recovery| NAND recovery SD card]]. | ||
= Step Five: What next?= | = Step Five: What next?= | ||
Your next step can be one of : | Your next step can be one of : | ||
* [[VAR-SOM- | * [[VAR-SOM-AM33 Yocto Krogoth Build |Build a complete Yocto]]. This guide will help you build a complete Yocto build, resulting in all required binaries to create a full bootable Yocto SD card, and all required binaries to burn to NAND-Flash. | ||
** [[VAR-SOM-MX6_Yocto Common Errors|Yocto common build errors</span>]] | ** [[VAR-SOM-MX6_Yocto Common Errors|Yocto common build errors</span>]] | ||
* Use your pre-built rescue recovery SD | * Use your pre-built rescue recovery SD card, as-is, to boot the system, and start applications programming. email support@variscite.com for FTP credentials. | ||
** [[VAR-SOM- | **[[VAR-SOM-AM33 Linux SDK 7 Basic debug with Eclipse| Application debugging with Eclipse]] | ||
* Test various interfaces. | * Test various interfaces : go to 'How to' section in main page. | ||
* Contact Support | * Contact Support | ||
** support@variscite.com | ** support@variscite.com | ||
Latest revision as of 09:38, 8 November 2022
VAR-SOM-AM33 - First Time? Start Here.
Step One: Read Documentations
Please download and read the development kit documentation. on Variscite website:
http://www.variscite.com/products/system-on-module-som/cortex-a8/var-som-am33-cpu-ti-am335x-am3354-am3352
NOTE:
Make sure you read the Quick Start Guide.
Make sure you read the Quick Start Guide.
Step Two: Setup Linux host PC Development Environment
Set up your development environment.
Step Three: DVK Power Up
Power up the board.
You should have the serial cable connected to the debug port, as describe in the quick start guide
When board boots, make sure you see the u-boot prints on your host PC hyper terminal. You will need to type-in commands in the command prompt late in the development stages
IMPORTANT:
Don't continue without the serial console operating.
Don't continue without the serial console operating.
Step Four: A quick test with NAND recovery SD card
Please follow the below guide to boot DVK with a bootable SD card , and burn a complete yocto into NAND-Flash
Step Five: What next?
Your next step can be one of :
- Build a complete Yocto. This guide will help you build a complete Yocto build, resulting in all required binaries to create a full bootable Yocto SD card, and all required binaries to burn to NAND-Flash.
- Use your pre-built rescue recovery SD card, as-is, to boot the system, and start applications programming. email support@variscite.com for FTP credentials.
- Test various interfaces : go to 'How to' section in main page.
- Contact Support
- support@variscite.com