|
|
| (One intermediate revision by one other user not shown) |
| Line 1: |
Line 1: |
| {{PageHeader|VAR-SOM-MX6 - USB Host}} {{DocImage|category1=VAR-SOM-MX6|category2=Yocto}} __toc__
| | #REDIRECT [[IMX USB Host]] |
| Plug a DiskOnKey, Mouse or Keyboard to any of the 3 USB host ports on the DVK.
| |
| = Example DiskOnKey =
| |
| Insert DiskOnKey:
| |
| <pre>usb 2-1.3: new high-speed USB device number 8 using ci_hdrc
| |
| usb-storage 2-1.3:1.0: USB Mass Storage device detected
| |
| scsi2 : usb-storage 2-1.3:1.0
| |
| scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 2.01 PQ: 0 ANSI: 6
| |
| sd 2:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
| |
| sd 2:0:0:0: [sdb] Write Protect is off
| |
| sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
| |
| sdb: sdb1
| |
| sd 2:0:0:0: [sdb] Attached SCSI disk
| |
| FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
| |
| </pre>
| |
| List directory
| |
| <pre> $ ls /run/media/sdb1/
| |
| $RECYCLE.BIN bookmarks-2015-06-25.json
| |
| Android iMX6_gpio_test
| |
| LOST.DIR linux-3.2.0-psp04.06.00.11
| |
| LS1021_SOM tek00000.png
| |
| Movies tek00001.png
| |
| Mpeg tek00002.png
| |
| Music test0.wav
| |
| Playlists test2.wav
| |
| SanDiskSecureAccessV2.0 test3.wav
| |
| SanDiskSecureAccessV2_win.exe testx.wav
| |
| System Volume Information vmlinux
| |
| TIInit_11.8.32.bts wifi_fw_android_working
| |
| VAR-SOM-AM33-SCHV212.DSN wl1271-nvs.bin
| |
| am43-demo xorcom
| |
| apk zImage
| |
| backing_file
| |
| </pre>
| |
| Write some data:
| |
| <pre>$ dd if=/dev/urandom of=/run/media/sdb1/junk bs=1M count=20
| |
| 20+0 records in
| |
| 20+0 records out
| |
| 20971520 bytes (21 MB) copied, 8.35507 s, 2.5 MB/s
| |
| </pre>
| |
| | |
| = Example FTDI =
| |
| Inseret the FTDI device:
| |
| <pre>usb 2-1.2: USB disconnect, device number 4
| |
| usb 2-1.2: new full-speed USB device number 7 using ci_hdrc
| |
| usbcore: registered new interface driver usbserial
| |
| usbcore: registered new interface driver usbserial_generic
| |
| usbserial: USB Serial support registered for generic
| |
| usbcore: registered new interface driver ftdi_sio
| |
| usbserial: USB Serial support registered for FTDI USB Serial Device
| |
| ftdi_sio 2-1.2:1.0: FTDI USB Serial Device converter detected
| |
| usb 2-1.2: Detected FT232RL
| |
| usb 2-1.2: Number of endpoints 2
| |
| usb 2-1.2: Endpoint 1 MaxPacketSize 64
| |
| usb 2-1.2: Endpoint 2 MaxPacketSize 64
| |
| usb 2-1.2: Setting MaxPacketSize 64
| |
| usb 2-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
| |
| </pre>
| |
| Connect to the target:
| |
| <pre>$ ssh root@192.168.1.130</pre>
| |
| Start minicom and set the interface
| |
| <pre>$ minicom -s
| |
| </pre>
| |
| connect pin 2 to 3 on the serial port and test for loop-back.
| |