Latest revision as of 20:30, 30 October 2024

DART-MX8M Release Notes

Yocto warrior-fsl-4.19.35-mx8mq-v1.1

Release Notes

Source	Repository	Branch	Commit ID
U-Boot	https://github.com/varigit/uboot-imx	imx_v2019.04_4.19.35_1.1.0-var01	f786e7bf9fd99050b158732e05e67ad34fdd9d2b
Kernel	https://github.com/varigit/linux-imx	imx_4.19.35_1.1.0_var01	1767ecabadca18a8a50057919ad4547b1021ff4d
meta-variscite-imx	https://github.com/varigit/meta-variscite-imx	warrior-imx-4.19.35-var01	150170c8f58138954e5f07f3095350a4d5e66e19

After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change List
Release 1.1
Kernel updates
Fixed LCD shifting issue after resume
MLK-22694: arch64: dts: fsl-imx8mq: Move src for dsi nodes and add lcdif clock
MLK-22694: imx: nwl_dsi-imx: Move mipi resets for i.MX8MQ
Enable HDMI Audio
Release 1.0
Upgraded to NXP BSP release 4.19.35_1.1.0

@@ Line 1,406: / Line 1,406: @@
 |-
 | '''Tests conducted on:''' ||
-- GPIO/LED:<br>U43.2 / R228 for DT8CustomBoard >= 2.0 (Use Oscilloscope to observe output signal)<br>
+- GPIO/LED:U43.2 / R228 for DT8CustomBoard >= 2.0 (Use Oscilloscope to observe output signal)<br>
 - I2C3<br>
 - PWM2<br>
 - UART2<br>
-- ECSP1:<br>Tested with ECSP1 disabled in the m4 device tree<br>
+- ECSP1: Tested with ECSP1 disabled in the m4 device tree<br>
-- QSPI:<br>Tested without QSPI device connected to the interface<br>
+- QSPI: Tested without QSPI device connected to the interface<br>
+|-
+| '''Known Issues''' ||
+|-
+| PWM demo does not work properly when running from U-boot || It stops working during Linux boot
 |}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.15.0_V1.0_DART-MX8M/><!--