MX9 Operational Modes: Difference between revisions
From Variscite Wiki
| (2 intermediate revisions by one other user not shown) | |||
| Line 7: | Line 7: | ||
= Introduction = | = Introduction = | ||
The {{#var:HARDWARE_NAME}} supports several operating modes: | The {{#var:HARDWARE_NAME}} supports several operating modes that allow for reduced power usage:: | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 19: | Line 19: | ||
| 0.8V | | 0.8V | ||
| 933 MHz | | 933 MHz | ||
| 933 MHz (1866 | | 933 MHz (1866 MT/s) | ||
|- | |- | ||
| Nominal Drive (NDM) | | Nominal Drive (NDM) | ||
| 0.85V | | 0.85V | ||
| 1.4 GHz | | 1.4 GHz | ||
| 1400 MHz (2800 | | 1400 MHz (2800 MT/s) | ||
|- | |- | ||
| Overdrive (ODM) | | Overdrive (ODM) | ||
| 0.9V<br /> | | 0.9V<br /> | ||
| 1.7 GHz | | 1.7 GHz | ||
| 1866 MHz (3733 | | 1866 MHz (3733 MT/s) | ||
|} | |} | ||
The Variscite release, based on NXP's Linux BSP GA release, configures the system to run in Overdrive mode (ODM) by default. This Overdrive mode and associated performance are not necessary for some user applications. Users can transition to Nominal or Low-drive mode as defined in the i.MX 93 data sheet instead. | The Variscite release, based on NXP's Linux BSP GA release, configures the system to run in Overdrive mode (ODM) by default. This Overdrive mode and associated performance are not necessary for some user applications. Users can transition to Nominal or Low-drive mode as defined in the i.MX 93 data sheet instead. | ||
For more information, please refer to | For more information, please refer to: | ||
* [https://www.nxp.com/docs/en/data-sheet/IMX93CEC.pdf i.MX 93 Datasheet] | |||
* [https://www.nxp.com/docs/en/reference-manual/IMX_REFERENCE_MANUAL.pdf IMX Reference Manual] | |||
* [https://docs.nxp.com/bundle/AN13917/page/topics/reducing_power_consumption_0.html AN13917: Reducing Power Consumption] | |||
* [https://docs.nxp.com/bundle/AN13917/page/topics/overview_of_imx_93_power.html AN13917: i.MX 93 Power Consumption Measurement] | |||
= Changing Modes = | = Changing Modes = | ||
| Line 55: | Line 59: | ||
System is in OD mode with DDR 3733 MTS! | System is in OD mode with DDR 3733 MTS! | ||
Change to NDM (1866 | Change to NDM (1866 MT/s): | ||
root@{{#var:MACHINE_NAME}}:~# echo 1 > /sys/devices/platform/imx93-lpm/mode | root@{{#var:MACHINE_NAME}}:~# echo 1 > /sys/devices/platform/imx93-lpm/mode | ||
System switching to ND mode... | System switching to ND mode... | ||
| Line 61: | Line 65: | ||
System is in ND mode with DDR 1866 MTS! | System is in ND mode with DDR 1866 MTS! | ||
Change to LDM (1866 | Change to LDM (1866 MT/s): | ||
root@{{#var:MACHINE_NAME}}:~# echo 2 > /sys/devices/platform/imx93-lpm/mode | root@{{#var:MACHINE_NAME}}:~# echo 2 > /sys/devices/platform/imx93-lpm/mode | ||
System switching to LD/SWFFC mode... | System switching to LD/SWFFC mode... | ||
| Line 67: | Line 71: | ||
System is in LD mode with DDR 1866 MTS! | System is in LD mode with DDR 1866 MTS! | ||
Change to LDM (625 | Change to LDM (625 MT/s): | ||
root@{{#var:MACHINE_NAME}}:~# echo 3 > /sys/devices/platform/imx93-lpm/mode | root@{{#var:MACHINE_NAME}}:~# echo 3 > /sys/devices/platform/imx93-lpm/mode | ||
System switching to LD/SWFFC mode... | System switching to LD/SWFFC mode... | ||
| Line 73: | Line 77: | ||
System is in LD mode with DDR 625 MTS! | System is in LD mode with DDR 625 MTS! | ||
Change to ODM (3733 | Change to ODM (3733 MT/s): | ||
root@{{#var:MACHINE_NAME}}:~# echo 0 > /sys/devices/platform/imx93-lpm/mode | root@{{#var:MACHINE_NAME}}:~# echo 0 > /sys/devices/platform/imx93-lpm/mode | ||
System switching to OD mode... | System switching to OD mode... | ||
| Line 114: | Line 118: | ||
! Mode | ! Mode | ||
! VDD_SOC | ! VDD_SOC | ||
! | ! MT/s | ||
! iperf3 Speed (Mbps) | ! iperf3 Speed (Mbps) | ||
|- | |- | ||
Latest revision as of 17:08, 18 December 2023
Warning: This page is designed to be used with a 'release' URL parameter.
This page is using the default release mx93-yocto-mickledore-6.1.36_2.1.0-v1.0.
To view this page for a specific Variscite SoM and software release, please follow these steps:
- Visit variwiki.com
- Select your SoM
- Select the software release
Operational Modes
.
Introduction
The supports several operating modes that allow for reduced power usage::
| Mode | VDD_SOC | A55 Max Frequency |
DRAM Max Frequency |
|---|---|---|---|
| Low Drive (LDM) | 0.8V | 933 MHz | 933 MHz (1866 MT/s) |
| Nominal Drive (NDM) | 0.85V | 1.4 GHz | 1400 MHz (2800 MT/s) |
| Overdrive (ODM) | 0.9V |
1.7 GHz | 1866 MHz (3733 MT/s) |
The Variscite release, based on NXP's Linux BSP GA release, configures the system to run in Overdrive mode (ODM) by default. This Overdrive mode and associated performance are not necessary for some user applications. Users can transition to Nominal or Low-drive mode as defined in the i.MX 93 data sheet instead.
For more information, please refer to:
- i.MX 93 Datasheet
- IMX Reference Manual
- AN13917: Reducing Power Consumption
- AN13917: i.MX 93 Power Consumption Measurement
Changing Modes
Boot low drive device tree
The default device tree supports ODM. A special device tree ' must be booted to support NDM and LDM:
# fw_setenv fdt_file
This device tree enables low drive mode and reduces the speed of the flexspi and usdhc peripherals so they can operate at the lower CPU and DRAM frequencies.
Change between modes
The driver/imx/soc/imx93_lpm.c driver uses imx-atf to manage the operating mode and can be controlled using a sysfs interface.
Read the current mode:
root@:~# cat /sys/devices/platform/imx93-lpm/mode System is in OD mode with DDR 3733 MTS!
Change to NDM (1866 MT/s):
root@:~# echo 1 > /sys/devices/platform/imx93-lpm/mode System switching to ND mode... root@:~# cat /sys/devices/platform/imx93-lpm/mode System is in ND mode with DDR 1866 MTS!
Change to LDM (1866 MT/s):
root@:~# echo 2 > /sys/devices/platform/imx93-lpm/mode System switching to LD/SWFFC mode... root@:~# cat /sys/devices/platform/imx93-lpm/mode System is in LD mode with DDR 1866 MTS!
Change to LDM (625 MT/s):
root@:~# echo 3 > /sys/devices/platform/imx93-lpm/mode System switching to LD/SWFFC mode... root@:~# cat /sys/devices/platform/imx93-lpm/mode System is in LD mode with DDR 625 MTS!
Change to ODM (3733 MT/s):
root@:~# echo 0 > /sys/devices/platform/imx93-lpm/mode System switching to OD mode... root@:~# cat /sys/devices/platform/imx93-lpm/mode System is in LD mode with DDR 3733 MTS!
Simple Memory Bandwidth Test
The iperf3 utility can be used to run a simple test that will report bitrates relative to the system speed.
Start an iperf3 server:
root@:~# iperf3 -s > /dev/null &
Switch to the preferred mode, and run an iperf3 client:
root@:~# iperf3 -c localhost Connecting to host localhost, port 5201 [ 5] local ::1 port 57608 connected to ::1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 526 MBytes 4.41 Gbits/sec 0 1.44 MBytes [ 5] 1.00-2.00 sec 528 MBytes 4.42 Gbits/sec 0 1.44 MBytes [ 5] 2.00-3.00 sec 526 MBytes 4.42 Gbits/sec 0 1.44 MBytes [ 5] 3.00-4.00 sec 529 MBytes 4.44 Gbits/sec 0 1.87 MBytes [ 5] 4.00-5.00 sec 530 MBytes 4.44 Gbits/sec 0 1.87 MBytes [ 5] 5.00-6.00 sec 530 MBytes 4.45 Gbits/sec 0 1.87 MBytes [ 5] 6.00-7.00 sec 532 MBytes 4.47 Gbits/sec 0 1.87 MBytes [ 5] 7.00-8.00 sec 528 MBytes 4.43 Gbits/sec 0 1.87 MBytes [ 5] 8.00-9.00 sec 531 MBytes 4.45 Gbits/sec 0 1.87 MBytes [ 5] 9.00-10.00 sec 529 MBytes 4.44 Gbits/sec 0 1.87 MBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 5.16 GBytes 4.44 Gbits/sec 0 sender [ 5] 0.00-10.00 sec 5.16 GBytes 4.44 Gbits/sec receiver
Below are the results performed using Yocto Mickledore with the 6.1.36 kernel:
| Mode | VDD_SOC | MT/s | iperf3 Speed (Mbps) |
|---|---|---|---|
| Low Drive | 0.8V | 625 | 974 |
| Low Drive | 0.8V | 1866 | 2100 |
| Nominal Drive | 0.85V | 1866 | 2100 |
| Overdrive | 0.9V | 3733 |
4400 |