DART-MX8M-MINI Release Notes: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
 
(24 intermediate revisions by 10 users not shown)
Line 126: Line 126:
| Upgraded to NXP BSP release 4.19.35_1.1.0
| Upgraded to NXP BSP release 4.19.35_1.1.0
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><!--
--><section begin=mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0/><!--
--><section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1}}
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/><!--


--><section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
--><section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
Line 629: Line 644:
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.2}}
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.3/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.3/><!--
--><section begin=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0/><!--
--><section begin=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1}}
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1/><!--


--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
Line 1,017: Line 1,047:
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/><!--


--><section begin=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><includeonly>
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-  
! Change List || Description
! Change List !! Description
|-
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2}}
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1}}
|-
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/><!--
|-
 
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly>
|-
{| class="wikitable"
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-  
|-
! Change List !! Description
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
 
|-
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/><includeonly>
| Upgraded to kernel version 5.4.85 ||
{| class="wikitable"
|-
|-  
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
! Change List !! Description
|-
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
| Fixed occasional pulseaudio device initialization problems ||
 
|-
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/><includeonly>
| Re-added packages available in previous Yocto releases ||
{| class="wikitable"
|-
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
! Change List !! Description
|-
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2}}
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
|}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
</includeonly><section end=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><!--
 
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/><!--


--><section begin=MCUXPRESSO_2.5.0_V1.1_DART-MX8M-MINI/><includeonly>  
--><section begin=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/><includeonly>
{| class="wikitable"  
{| class="wikitable"
|-
! Change List !! Description
|-  
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
 
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-  
|-  
| Move PWM to PWM3 || This allow compatibility with VAR-SOM-MX8M-MINI
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
 
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/><includeonly>
{| class="wikitable"
|-  
|-  
| Move UART to UART3 || This allow compatibility with VAR-SOM-MX8M-MINI
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/><!--
 
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/><includeonly>
{| class="wikitable"
|-  
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
! Change List !! Description
|-  
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2}}
| Initial release for Cortex-M4 core of DART-MX8M-MINI ||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1}}
|-  
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
| '''Tests conducted on:''' ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/><!--
|-  
 
| GPIO/LED ||
--><section begin=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><includeonly>
|-  
| I2C4 ||
|-  
| PWM3 ||
|-  
| UART3 ||
|}  
{{#vardefine:CHANGE_LOG_FOUND|true}}  
</includeonly><section end=MCUXPRESSO_2.5.0_V1.1_DART-MX8M-MINI/><!--


--><section begin=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List
! Change List || Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
|-
| Initial FreeRTOS 2.8.0 release for Cortex-M4 core of DART-MX8M-MINI
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
|-
| '''Tests conducted on:'''
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|-
| GPIO/LED
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
|-
| I2C4
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Change List
| Upgraded to kernel version 5.4.85 ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
|-
| Initial FreeRTOS 2.9.0 release for Cortex-M4 core of DART-MX8M-MINI
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
|-
| '''Tests conducted on:'''
| Fixed occasional pulseaudio device initialization problems ||
|-
|-
| GPIO/LED
| Re-added packages available in previous Yocto releases ||
|-
|-
| I2C4
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-  
|-
| PWM3
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|-
|}
| UART3
{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><!--
</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI/><!--  


--><section begin=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=MCUXPRESSO_2.5.0_V1.1_DART-MX8M-MINI/><includeonly>  
{| class="wikitable"
{| class="wikitable"  
|-
|-
! Change List
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.10.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-  
|-  
| PWM3
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Move PWM to PWM3 || This allow compatibility with VAR-SOM-MX8M-MINI
|-
| Move UART to UART3 || This allow compatibility with VAR-SOM-MX8M-MINI
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release for Cortex-M4 core of DART-MX8M-MINI ||
|-
| '''Tests conducted on:''' ||
|-
| GPIO/LED ||
|-
| I2C4 ||
|-
| PWM3 ||
|-  
|-  
| UART3
| UART3 ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}  
</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><!--
{{#vardefine:CHANGE_LOG_FOUND|true}}  
</includeonly><section end=MCUXPRESSO_2.5.0_V1.1_DART-MX8M-MINI/><!--  


--><section begin=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 1,149: Line 1,191:
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial FreeRTOS 2.11.1 release for Cortex-M4 core of DART-MX8M-MINI
| Initial FreeRTOS 2.8.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
|-
| '''Tests conducted on:'''
| '''Tests conducted on:'''
Line 1,161: Line 1,203:
| UART3
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><!--  
</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/><!--  


--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><includeonly>
--><section begin=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
| Initial FreeRTOS 2.9.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
|-
| CAN: Upgraded the MCP251XFD CAN driver ||
| '''Tests conducted on:'''
|-
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
| GPIO/LED
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
| Initial FreeRTOS 2.10.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
| '''Tests conducted on:'''
|-
|-
| Fix occasional WiFi crash during bootup ||
| GPIO/LED
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| Update BT/WiFi firmware for bc43xx to Laird release 8.2.0.16 ||
! Change List
|-
|-
| Kernel: Update Bluetooth firmware file name to BCM43430A1.hcd ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| Initial FreeRTOS 2.11.1 release for Cortex-M4 core of DART-MX8M-MINI
|-
|-
| imx-atf: Fixed the derate enable conflict issue ||
| '''Tests conducted on:'''
|-
|-
| U-Boot: Fix m4 binary loading when using the TCM ||
| GPIO/LED
|-
|-
| Kernel: Correct ldo1/ldo2 voltage for DART-MX8MM-MINI and VAR-SOM-MX8MM-MINI || Based on MLK-23275-1 by NXP
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>||
! Change List
|-
|-
| '''Android:''' ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Added MTP and PTP support || (The current ptn5150 driver does not support power delivery role swap)
| Initial FreeRTOS 2.12.1 release for Cortex-M4 core of DART-MX8M-MINI
|-
|-
| Switched Android UI dpi to 160dpi ||
| '''Tests conducted on:'''
|-
|-
| Added a new boot animation ||
| GPIO/LED
|-
|-
| Framework auto focus support ||
| I2C4
|-
|-
| '''U-Boot:''' ||
| PWM3
|-
|-  
| SPL: Disabled SD card detect pin ||
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| '''Kernel:''' ||
! Change List
|-
|-
| OV5640 camera auto focus support ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Fixed missing SD reset pinmux definition for SOM rev. 1.0 ||
| Initial FreeRTOS 2.13.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
|-
| MLK-21958-6 introduced a new clocks calculation method for mipi panels ||
| '''Tests conducted on:'''
|-
|-
| drm/bridge: nwl-dsi: allow using legacy pll settings||
| GPIO/LED
|-
|-
| Added Cortex-M4 related device trees ||
| I2C4
|-
|-  
| sound: pcm_memory: export snd_pcm_lib_preallocate_free ||
| PWM3
|-
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| UART3
|-
| Android 10.0.0 v1.0.0 (kernel 4.19.42) for DART-MX8M-MINI ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><!--
</includeonly><section end=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI/><!--


--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.7/><includeonly>
--><section begin=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.15.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.7</span> ||
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><includeonly>
{| class="wikitable"
|-
|-
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
Line 1,315: Line 1,404:
| Android 10.0.0 v1.0.0 (kernel 4.19.42) for DART-MX8M-MINI ||
| Android 10.0.0 v1.0.0 (kernel 4.19.42) for DART-MX8M-MINI ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.7/><!--
</includeonly><section end=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><!--


--><section begin=RELEASE_DUNFELL_V1.4_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.7/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List || Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.7</span> ||
|-
|-
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
| CAN: Upgraded the MCP251XFD CAN driver ||
|-
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
Line 1,344: Line 1,433:
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
|-
| Fixed occasional pulseaudio device initialization problems ||
| Fix occasional WiFi crash during bootup ||
|-
|-
| Re-added packages available in previous Yocto releases ||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| Update BT/WiFi firmware for bc43xx to Laird release 8.2.0.16 ||
|-
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
| Kernel: Update Bluetooth firmware file name to BCM43430A1.hcd ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.4_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| imx-atf: Fixed the derate enable conflict issue ||  
|-
|-
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini ||
| U-Boot: Fix m4 binary loading when using the TCM ||  
|-
|-
! Known Issues !!
| Kernel: Correct ldo1/ldo2 voltage for DART-MX8MM-MINI and VAR-SOM-MX8MM-MINI || Based on MLK-23275-1 by NXP
|-  
| WiFi hotspot SSID broadcast not working reliably || It is a known issue on NXP devkit
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>||
</includeonly><section end=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_DUNFELL_V1.5_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Change List || Description
| '''Android:''' ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
| Added MTP and PTP support || (The current ptn5150 driver does not support power delivery role swap)
|-
|-
| U-Boot: Moved the setting of the console env. variable from the source code to a script in the default env. ||
| Switched Android UI dpi to 160dpi ||
|-
|-
| Added dependencies to avoid conflict between connman and systemd-networkd ||
| Added a new boot animation ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
| Framework auto focus support ||
|-
|-
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
| '''U-Boot:''' ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
| SPL: Disabled SD card detect pin ||
|-
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
| '''Kernel:''' ||
|-
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
| OV5640 camera auto focus support ||  
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| Fixed missing SD reset pinmux definition for SOM rev. 1.0 ||  
|-
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
| MLK-21958-6 introduced a new clocks calculation method for mipi panels ||  
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| drm/bridge: nwl-dsi: allow using legacy pll settings||
|-
|-
| Upgraded to kernel version 5.4.85 ||
| Added Cortex-M4 related device trees ||
|-
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
| sound: pcm_memory: export snd_pcm_lib_preallocate_free ||
|-
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| Fixed occasional pulseaudio device initialization problems ||
| Android 10.0.0 v1.0.0 (kernel 4.19.42) for DART-MX8M-MINI ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.7/><!--
 
--><section begin=RELEASE_DUNFELL_V1.4_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| Re-added packages available in previous Yocto releases ||
! Change List || Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
|}
|-
{{#vardefine:CHANGE_LOG_FOUND|true}}
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
</includeonly><section end=RELEASE_DUNFELL_V1.5_DART-MX8M-MINI/><!--
|-
 
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
--><section begin=RELEASE_DUNFELL_V1.6_DART-MX8M-MINI/><includeonly>
|-
{| class="wikitable"
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|-
! Change List || Description
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|-
| Updated Kernel from 5.4.85 to 5.4.142 ||
| Upgraded to kernel version 5.4.85 ||
|-
|-
| Update Yocto meta layers to latest:
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
 
yocto/poky
 
yocto/meta-freescale
 
oe/meta-openembedded
 
oe/meta-python2
 
freescale/meta-freescale-3rdparty
 
freescale/meta-freescale-distro
 
freescale/Documentation
 
QT5/meta-qt5
 
sbabic/meta-swupdate
 
yocto/meta-virtualization
 
varigit/meta-variscite-fslc
|-
|-
| linux-firmware: update TI WL18xx BT service pack to v4.7 ||
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
| Fixed occasional pulseaudio device initialization problems ||
|-
|-
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 ||
| Re-added packages available in previous Yocto releases ||
|-
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.4_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably || It is a known issue on NXP devkit
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_DUNFELL_V1.5_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
|-
| U-Boot: Moved the setting of the console env. variable from the source code to a script in the default env. ||
| U-Boot: Moved the setting of the console env. variable from the source code to a script in the default env. ||
Line 1,493: Line 1,581:
|}
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.6_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_DUNFELL_V1.5_DART-MX8M-MINI/><!--


--><section begin=RELEASE_DUNFELL_V1.7_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_DUNFELL_V1.6_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List || Description
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.7</span> ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
Line 1,579: Line 1,661:
|}
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.7_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_DUNFELL_V1.6_DART-MX8M-MINI/><!--


--><section begin=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><includeonly>
--><section begin=RELEASE_DUNFELL_V1.7_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List || Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.7</span> ||
|-
|-
| Android 10.0.0_2.6.0 (kernel 5.4.70) for DART-MX8M-MINI ||
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
|-
| Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
| Updated Kernel from 5.4.85 to 5.4.142 ||
|-
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
| Update Yocto meta layers to latest:
|-
 
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
yocto/poky
|-
 
| Remap buttons || Home maps to Android Home page, Up maps to Volume Up and Down maps to Volume Down
yocto/meta-freescale
|-
| Fix suspend resume issue ||
|-
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frame API ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><!--


oe/meta-openembedded


--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
oe/meta-python2
{| class="wikitable"
 
freescale/meta-freescale-3rdparty
 
freescale/meta-freescale-distro
 
freescale/Documentation
 
QT5/meta-qt5
 
sbabic/meta-swupdate
 
yocto/meta-virtualization
 
varigit/meta-variscite-fslc
|-
|-
! Change List !! Description
| linux-firmware: update TI WL18xx BT service pack to v4.7 ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 ||
|-
|-
! Known Issues !!
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-  
| WiFi hotspot SSID broadcast not working reliably ||
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| U-Boot: Moved the setting of the console env. variable from the source code to a script in the default env. ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| Added dependencies to avoid conflict between connman and systemd-networkd ||
|-
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
|-
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
|-
! Known Issues !!
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-  
| WiFi hotspot SSID broadcast not working reliably ||
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|-
| '''U-Boot updates''' ||
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
|-
| Add delay to detect ADIN PHY ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
|-
|'''Linux updates updates''' ||
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
|-
| Enable ADIN PHY support ||
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| Fixed occasional pulseaudio device initialization problems ||
|-
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
| Re-added packages available in previous Yocto releases ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|-
|}
! Known Issues !!
{{#vardefine:CHANGE_LOG_FOUND|true}}
|-  
</includeonly><section end=RELEASE_DUNFELL_V1.7_DART-MX8M-MINI/><!--
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><!--


--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><includeonly>
--><section begin=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| '''U-Boot updates''' ||
| Android 10.0.0_2.6.0 (kernel 5.4.70) for DART-MX8M-MINI ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
{| class="wikitable"
|-
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|-
| '''U-Boot updates''' ||
| Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
|-
| Add delay to detect ADIN PHY ||
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
|-
|'''Linux updates updates''' ||
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
|-
| Enable ADIN PHY support ||
| Remap buttons || Home maps to Android Home page, Up maps to Volume Up and Down maps to Volume Down
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| Fix suspend resume issue ||
|-
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frame API ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini ||
|-
|-
! Known Issues !!
! Known Issues !!
Line 1,723: Line 1,788:
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><!--
</includeonly><section end=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><!--
 


--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><includeonly>
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| '''U-Boot updates''' ||
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
|-
| ADIN1300: Disable RGMII RX clock delay ||
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|-
| imx8mm-var-dart: read carrier_rev from eeprom ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
{| class="wikitable"
|-
|-
| Set AR8033 VDDH_REG to 1.8V ||
! Change List !! Description
|-
|-
|'''Linux updates updates''' ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|-
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| '''U-Boot updates''' ||
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
|-
| Refactor code to detect ADIN PHY || Moved delay to device tree node
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
Line 1,772: Line 1,854:
| WiFi hotspot SSID broadcast not working reliably ||
| WiFi hotspot SSID broadcast not working reliably ||
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><!--
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| '''U-Boot updates''' ||
|-
| ADIN1300: Disable RGMII RX clock delay ||
|-
| imx8mm-var-dart: read carrier_rev from eeprom ||
|-
| Set AR8033 VDDH_REG to 1.8V ||
|-
|'''Linux updates updates''' ||
|-
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><!--
 
--><section begin=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=mx8mm-android-11.0.0_2.6.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Android install script and machine name changes ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=mx8mm-android-11.0.0_2.6.0-v1.1/><!--
 
 
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.0/><!--
 
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.1/><!--
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.2/><!--
 
<!--
--><section begin=mx8mm-android-13.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-13.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-13.0.0_1.0.0-v1.0/><!--
 
--><section begin=mx8mm-android-13.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-13.0.0_1.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-13.0.0_1.0.0-v1.1/><!--


--><section begin=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
--><section begin=mx8mm-android-14.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-14.0.0_1.0.0-v1.0}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-14.0.0_1.0.0-v1.0/><!--
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><!--


--><section begin=mx8mm-android-11.0.0_2.6.0-v1.1/><includeonly>
--><section begin=mx8mm-android-14.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-14.0.0_1.0.0-v1.1}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-14.0.0_1.0.0-v1.1/><!--
| Android install script and machine name changes ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=mx8mm-android-11.0.0_2.6.0-v1.1/><!--

Latest revision as of 14:44, 18 September 2024


DART-MX8M-MINI / VAR-SOM-MX8M-MINI Release Notes

Yocto warrior-fsl-4.19.35-mx8mm-v1.1

Release Notes

Based on release Yocto: Poky 2.7, BSP: NXP L4.19.35-1.1.0, Linux: imx_4.19.35_1.1.0
Release tag warrior-fsl-4.19.35-mx8mm-v1.1
Release manifest imx-4.19.35-1.1.0-var01.xml
Date 9/23/2020
Supported platforms DART-MX8M-MINI / VAR-SOM-MX8M-MINI
SOM revision v1.0 and higher
File System build system Yocto Warrior
Recovery SD card link dart-mx8mm-recovery-sd.v32.img.gz

Relevant git Repositories

Source Repository Branch Commit ID
U-Boot https://github.com/varigit/uboot-imx imx_v2019.04_4.19.35_1.1.0-var01 3e1643239fb11297209254dbaa803425cf0c1702
Kernel https://github.com/varigit/linux-imx imx_4.19.35_1.1.0_var01 dc7a2fde4ab056303e2011347438bdae23036c5e
meta-variscite-imx https://github.com/varigit/meta-variscite-imx warrior-imx-4.19.35-var01 207ebb821ab9d1942df73f6d1b294884359ea626


After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List
Release 1.1
Yocto updates
Added an image with Docker support
fsl-image-qt5: allow building the toolchain using populate_sdk
Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies
Kernel updates
Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP)
Kernel defconfig: Extend Docker features
U-Boot updates
SPL: Disabled SD card detect pin
Fixed M4 binary loading when using the TCM
Release 1.0
Upgraded to NXP BSP release 4.19.35_1.1.0