DART-MX8M-PLUS Display: Difference between revisions
No edit summary |
No edit summary |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
<!-- Set release according to "release" parameter in URL and use RELEASE_ZEUS_V1.0_DART-MX8M-PLUS as default | <!-- Set release according to "release" parameter in URL and use RELEASE_ZEUS_V1.0_DART-MX8M-PLUS as default | ||
--> {{# | --> {{INIT_RELEASE_PARAM|RELEASE_ZEUS_V1.0_DART-MX8M-PLUS}}<!-- | ||
--> {{#lst: | --> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!-- | ||
--> {{#lst:B2QT_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!-- | |||
--> {{PageHeader|{{#var:HARDWARE_NAME}} Display}} {{DocImage|category1=Yocto|category2=Debian}}[[Category:{{#var:HARDWARE_NAME}}]]__toc__ | --> {{PageHeader|{{#var:HARDWARE_NAME}} Display}} {{DocImage|category1=Yocto|category2=Debian}}[[Category:{{#var:HARDWARE_NAME}}]]__toc__ | ||
| Line 13: | Line 14: | ||
To support a custom LVDS panel you should make several modifications.<br> | To support a custom LVDS panel you should make several modifications.<br> | ||
The following code references Variscite panel in arch/arm64/boot/dts/freescale/{{#var:DEFAULT_DTB}} under kernel source tree | The following code references Variscite panel in arch/arm64/boot/dts/freescale/{{#replace:{{#var:DEFAULT_DTB}}|.dtb|.dts}} under kernel source tree | ||
<pre> | <pre> | ||
| Line 71: | Line 72: | ||
... | ... | ||
}; | }; | ||
</pre> | </pre> | ||
| Line 122: | Line 122: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
|}} | |}} | ||
= Rotating the Weston display = | |||
{{WESTON_DISPLAY_ROTATE}} | |||
Latest revision as of 14:58, 22 March 2024
This page is using the default release RELEASE_ZEUS_V1.0_DART-MX8M-PLUS.
To view this page for a specific Variscite SoM and software release, please follow these steps:
- Visit variwiki.com
- Select your SoM
- Select the software release
HDMI, MIPI-DSI and LVDS
DART-MX8M-PLUS SoC supports LVDS, HDMI and MIPI-DSI interfaces.
DART-MX8M-PLUS carrier board comes with LVDS and HDMI connectors, so you can easily connect LVDS and HDMI displays.
Connecting MIPI-DSI display to DART-MX8M-PLUS carrier board requires designing a custom connector.
Adding custom LVDS panel
DART-MX8M-PLUS evaluation kit comes with 800x480 LCD panel. DART-MX8M-PLUS DTS file was created with this panel in mind.
To support a custom LVDS panel you should make several modifications.
The following code references Variscite panel in arch/arm64/boot/dts/freescale/imx8mp-var-dart.dts under kernel source tree
panel {
compatible = "sgd,gktw70sdae4se", "panel-lvds";
backlight = <&backlight>;
width-mm = <153>;
height-mm = <87>;
label = "gktw70sdae4se";
data-mapping = "jeida-24";
status = "okay";
panel-timing {
clock-frequency = <33000000>;
hactive = <800>;
vactive = <480>;
hback-porch = <40>;
hfront-porch = <40>;
vback-porch = <29>;
vfront-porch = <13>;
hsync-len = <48>;
vsync-len = <3>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
};
...
};
&ldb {
status = "okay";
lvds-channel@0 {
fsl,data-mapping = "jeida";
fsl,data-width = <24>;
status = "okay";
...
};
You should modify panel "data-mapping" and "display-timings" properties to match your panel specification.
You should also modify ldb (internal LVDS bridge) "fsl,data-mapping" and "fsl,data-width" properties to match your panel specification.
Supported "data-mapping" values are "jeida-18", "jeida-24" and "vesa-24".
Supported "fsl,data-mapping" values are "jeida", and "spwg".
Supported "fsl,data-width" values are <18>, and <24>.
For dual channel LVDS panels add fsl,dual-channel property to ldb node, as in the example below:
&ldb {
status = "okay";
fsl,dual-channel;
lvds-channel@0 {
fsl,data-mapping = "jeida";
fsl,data-width = <24>;
status = "okay";
...
};
Rotating the Weston display
To rotate the Weston display, edit /etc/xdg/weston/weston.ini.
For example, rotate the display 90 degrees:
[output] name=LVDS-1 transform=90
For more information, see the weston man pages: