DART-MX8M-MINI Release Notes: Difference between revisions
From Variscite Wiki
No edit summary |
No edit summary |
||
(108 intermediate revisions by 12 users not shown) | |||
Line 102: | Line 102: | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> | | <span {{#var:STYLE_RELEASE}}>Release 1.1</span> | ||
|- | |- | ||
| '''Yocto | | '''Yocto updates''' | ||
|- | |- | ||
| Added an image with Docker support | | Added an image with Docker support | ||
|- | |- | ||
| fsl-image-qt5: allow building the toolchain using populate_sdk | | fsl-image-qt5: allow building the toolchain using populate_sdk | ||
|- | |- | ||
| Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies | | Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies | ||
|- | |- | ||
| '''Kernel | | '''Kernel updates''' | ||
|- | |- | ||
| Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP) | | Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP) | ||
Line 116: | Line 116: | ||
| Kernel defconfig: Extend Docker features | | Kernel defconfig: Extend Docker features | ||
|- | |- | ||
| '''U-Boot | | '''U-Boot updates''' | ||
|- | |- | ||
| SPL: Disabled SD card detect pin | | SPL: Disabled SD card detect pin | ||
Line 126: | Line 126: | ||
| Upgraded to NXP BSP release 4.19.35_1.1.0 | | Upgraded to NXP BSP release 4.19.35_1.1.0 | ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><!-- | |}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><!-- | ||
--><section begin=mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0/><!-- | |||
--><section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1}} | |||
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/><!-- | |||
--><section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!-- | |||
--><section begin=RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI}} | |||
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI/><!-- | |||
--><section begin=RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI/><!-- | |||
--><section begin=RELEASE_DUNFELL_B2QT_V1.1_DART-MX8M-MINI/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''meta-variscite-boot2qt''' || | |||
|- | |||
| Update to Qt 6.0.4 || | |||
|- | |||
| b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools || | |||
|- | |||
| manifest: meta-variscite-fslc: Update to latest || | |||
|- | |||
| '''U-Boot''' || | |||
|- | |||
| imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues | |||
|- | |||
| imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot || | |||
|- | |||
| imx8mm_var_dart: Set console environment variable in the default environment || | |||
|- | |||
| '''Linux''' || | |||
|- | |||
| Upgraded to version 5.4.142 || | |||
|- | |||
| imx8_var_defconfig: add full docker support || | |||
|- | |||
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| gpio: pca953x: Introduce standard-regs-fallback property || | |||
|- | |||
| gpio: pca953x: Introduce support for nxp,pcal6408 || | |||
|- | |||
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" || | |||
|- | |||
| sn65dsi83: Add device tree property to swap LVDS Channel A/B || | |||
|- | |||
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp || | |||
|- | |||
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp || | |||
|- | |||
| Revert "gpio: pca953x: Disable PM routines" || | |||
|- | |||
| ARM: configs: Variscite: Enable USB_HSIC_USB3053 || | |||
|- | |||
| ARM: configs: Variscite: disable EVBUG module || | |||
|- | |||
| ARM64: dts: imx8: Variscite: add WM8904 DRC support for all SoMs || | |||
|- | |||
| ASoC: wm8904: add DMIC support || | |||
|- | |||
| ASoC: wm8904: extend device tree support || | |||
|- | |||
| Revert "ASoC: wm8904: add DMIC support and allow enabling it" || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| First B2Qt Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.1_DART-MX8M-MINI/><!-- | |||
--><section begin=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/><includeonly> | --><section begin=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/><includeonly> | ||
Line 294: | Line 395: | ||
| Added a new boot animation || | | Added a new boot animation || | ||
|- | |- | ||
| Framework auto focus support || | | Framework auto focus support || | ||
|- | |- | ||
| '''U-Boot:''' || | | '''U-Boot:''' || | ||
Line 369: | Line 470: | ||
| Dual Display Support || LVDS, LVDS + DP, LVDS + HDMI combination supported | | Dual Display Support || LVDS, LVDS + DP, LVDS + HDMI combination supported | ||
|- | |- | ||
| '''Debian Build | | '''Debian Build updates:''' || | ||
|- | |- | ||
| Align mx8_install_debian.sh to lastest mx8_install_yocto.sh || | | Align mx8_install_debian.sh to lastest mx8_install_yocto.sh || | ||
Line 401: | Line 502: | ||
| Move rpmsg area at 0x40000000 || | | Move rpmsg area at 0x40000000 || | ||
|- | |- | ||
| '''Debian Build | | '''Debian Build updates:''' || | ||
|- | |- | ||
| Rename debian-emmc.sh -> install_debian.sh || | | Rename debian-emmc.sh -> install_debian.sh || | ||
Line 445: | Line 546: | ||
| Initial Debian Buster release || | | Initial Debian Buster release || | ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><!-- | |}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><!-- | ||
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues | |||
|- | |||
| '''Linux kernel updates''' || | |||
|- | |||
| Updated to version 5.4.142 || Merge remote-tracking branch 'fslc/5.4-2.1.x-imx' into 5.4-2.1.x-imx_var01 | |||
|- | |||
| imx8_var_defconfig: add full docker support || | |||
|- | |||
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| gpio: pca953x: Introduce standard-regs-fallback property || | |||
|- | |||
| gpio: pca953x: Introduce support for nxp,pcal6408 || | |||
|- | |||
| Revert "Revert "gpio: pca953x: Disable PM routines"" || | |||
|- | |||
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" || | |||
|- | |||
| sn65dsi83: Add device tree property to swap LVDS Channel A/B || | |||
|- | |||
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp || | |||
|- | |||
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp || | |||
|- | |||
| '''Debian updates:''' || | |||
|- | |||
| pulesaudio: Fix pulseaudio system-wide mode || | |||
|- | |||
| systemd: set HandlePowerKey to ignore || | |||
|- | |||
| freertos-variscite: Add initial support for imx8mm || | |||
|- | |||
| deb: Add bluez-alsa 3.0.0 aligned to Dunfell release || | |||
|- | |||
| bluez-alsa: ported bluez-alsa support from yocto-dunfell || | |||
|- | |||
| weston_rootfs: Add libgpiod and libgpiod tools || | |||
|- | |||
| imx8: libgbm1 updated to 20.3.4-1 required by latest weston update || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| ''' Linux kernel updates:''' || | |||
|- | |||
| Upgraded to kernel version 5.4.85 || | |||
|- | |||
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 || | |||
|- | |||
| Added support for VAR-SOM-MX8M-MINI revision 1.3 || | |||
|- | |||
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | |||
|- | |||
| '''U-Boot updates:''' || | |||
|- | |||
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch || | |||
|- | |||
| '''Debian build updates:''' || | |||
|- | |||
| Fix package dependencies and clean up || | |||
|- | |||
| Clean-up /tmp in the rootfs after building the Linux kernel headers package || | |||
|- | |||
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia || | |||
|- | |||
| Updated imx-firmware version to 8.8 || | |||
|- | |||
| Updated Wi-Fi and BT firmware to Laird release 8.2.0.16 || | |||
|- | |||
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch || | |||
|- | |||
| imx-mkimage: Update patch to align to Yocto Dunfell || | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.1/><!-- | |||
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.2}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.2/><!-- | |||
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.3/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.3}} | |||
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.2}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.3/><!-- | |||
--><section begin=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0/><!-- | |||
--><section begin=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1}} | |||
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1/><!-- | |||
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly> | --><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly> | ||
Line 455: | Line 669: | ||
| Initial Debian Bullseye release || | | Initial Debian Bullseye release || | ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><!-- | |}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><!-- | ||
--><section begin= | --><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.0/><includeonly> | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
! Change List !! Description | ! Change List !! Description | ||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release | | <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | ||
|- | |- | ||
| ''' Linux kernel updates:''' || | | ''' Linux kernel updates:''' || | ||
Line 491: | Line 705: | ||
|- | |- | ||
| imx-mkimage: Update patch to align to Yocto Dunfell || | | imx-mkimage: Update patch to align to Yocto Dunfell || | ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.0/><!-- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end= | |||
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly> | --><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly> | ||
Line 584: | Line 797: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
! Change List | ! Change List !! Description | ||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''Yocto updates''' || | |||
|- | |||
| freertos-variscite: Add 2.10.x support for imx8mm || | |||
|- | |||
| swupdate: workaround for UTF8 compatibility in libarchive || | |||
|- | |||
| bcm43xx-utils: variscite-wifi: Add wifi_down routine || | |||
|- | |||
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES || | |||
|- | |||
| bcm43xx-utils: Consolidate WIFI scripts || | |||
|- | |||
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package || | |||
|- | |||
| variscite-bt: Create SOM specific BT init scripts || | |||
|- | |||
| fsl-image-gui: Add libgpiod and libgpiod-tools || | |||
|- | |||
| '''Linux updates''' || | |||
|- | |||
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| gpio: pca953x: Introduce standard-regs-fallback property || | |||
|- | |||
| gpio: pca953x: Introduce support for nxp,pcal6408 || | |||
|- | |||
| sn65dsi83: Add device tree property to swap LVDS Channel A/B || | |||
|- | |||
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp || | |||
|- | |||
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI/><!-- | |||
--><section begin=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Add delay to detect ADIN PHY || | |||
|- | |||
| '''Linux updates updates''' || | |||
|- | |||
| Enable driver for ADIN PHY || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''Yocto updates''' || | |||
|- | |||
| freertos-variscite: Add 2.10.x support for imx8mm || | |||
|- | |||
| swupdate: workaround for UTF8 compatibility in libarchive || | |||
|- | |||
| bcm43xx-utils: variscite-wifi: Add wifi_down routine || | |||
|- | |||
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES || | |||
|- | |||
| bcm43xx-utils: Consolidate WIFI scripts || | |||
|- | |||
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package || | |||
|- | |||
| variscite-bt: Create SOM specific BT init scripts || | |||
|- | |||
| fsl-image-gui: Add libgpiod and libgpiod-tools || | |||
|- | |||
| '''Linux updates''' || | |||
|- | |||
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| gpio: pca953x: Introduce standard-regs-fallback property || | |||
|- | |||
| gpio: pca953x: Introduce support for nxp,pcal6408 || | |||
|- | |||
| sn65dsi83: Add device tree property to swap LVDS Channel A/B || | |||
|- | |||
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp || | |||
|- | |||
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/><!-- | |||
--><section begin=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Refactor code to detect ADIN PHY || Moved delay to device tree node | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Add delay to detect ADIN PHY || | |||
|- | |||
| '''Linux updates updates''' || | |||
|- | |||
| Enable driver for ADIN PHY || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''Yocto updates''' || | |||
|- | |||
| freertos-variscite: Add 2.10.x support for imx8mm || | |||
|- | |||
| swupdate: workaround for UTF8 compatibility in libarchive || | |||
|- | |||
| bcm43xx-utils: variscite-wifi: Add wifi_down routine || | |||
|- | |||
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES || | |||
|- | |||
| bcm43xx-utils: Consolidate WIFI scripts || | |||
|- | |||
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package || | |||
|- | |||
| variscite-bt: Create SOM specific BT init scripts || | |||
|- | |||
| fsl-image-gui: Add libgpiod and libgpiod-tools || | |||
|- | |||
| '''Linux updates''' || | |||
|- | |||
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| gpio: pca953x: Introduce standard-regs-fallback property || | |||
|- | |||
| gpio: pca953x: Introduce support for nxp,pcal6408 || | |||
|- | |||
| sn65dsi83: Add device tree property to swap LVDS Channel A/B || | |||
|- | |||
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp || | |||
|- | |||
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/><!-- | |||
--><section begin=RELEASE_HARDKNOTT_V1.4_DART-MX8M-MINI/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| ADIN1300: Disable RGMII RX clock delay || | |||
|- | |||
| imx8mm-var-dart: read carrier_rev from eeprom || | |||
|- | |||
| '''Linux updates''' || | |||
|- | |||
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Refactor code to detect ADIN PHY || Moved delay to device tree node | |||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1. | | <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | ||
|- | |- | ||
| ''' | | '''U-Boot updates''' || | ||
|- | |- | ||
| | | Add delay to detect ADIN PHY || | ||
|- | |- | ||
| | | '''Linux updates updates''' || | ||
|- | |- | ||
| | | Enable driver for ADIN PHY || | ||
|- | |- | ||
| | | <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | ||
|- | |- | ||
| | | '''Yocto updates''' || | ||
|- | |- | ||
| | | freertos-variscite: Add 2.10.x support for imx8mm || | ||
|- | |- | ||
| | | swupdate: workaround for UTF8 compatibility in libarchive || | ||
|- | |- | ||
| bcm43xx-utils: | | bcm43xx-utils: variscite-wifi: Add wifi_down routine || | ||
|- | |- | ||
| | | fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES || | ||
|- | |- | ||
| | | bcm43xx-utils: Consolidate WIFI scripts || | ||
|- | |- | ||
| | | bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package || | ||
|- | |- | ||
| | | variscite-bt: Create SOM specific BT init scripts || | ||
|- | |- | ||
| | | fsl-image-gui: Add libgpiod and libgpiod-tools || | ||
|- | |- | ||
| | | '''Linux updates''' || | ||
|- | |- | ||
| | | imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | ||
|- | |- | ||
| | | gpio: pca953x: Introduce standard-regs-fallback property || | ||
|- | |||
| gpio: pca953x: Introduce support for nxp,pcal6408 || | |||
|- | |- | ||
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp | | sn65dsi83: Add device tree property to swap LVDS Channel A/B || | ||
|- | |||
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp || | |||
|- | |||
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp || | |||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | | <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | ||
|- | |- | ||
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI | | Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI || | ||
|} | |} | ||
{{#vardefine:CHANGE_LOG_FOUND|true}} | {{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end=RELEASE_HARDKNOTT_V1. | </includeonly><section end=RELEASE_HARDKNOTT_V1.4_DART-MX8M-MINI/><!-- | ||
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0/><!-- | |||
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/><!-- | |||
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/><!-- | |||
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/><!-- | |||
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/><!-- | |||
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/><!-- | |||
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/><!-- | |||
--><section begin=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/><!-- | |||
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/><!-- | |||
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/><!-- | |||
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1}} | |||
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/><!-- | |||
--><section begin=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><includeonly> | --><section begin=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><includeonly> | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
Line 754: | Line 1,245: | ||
| UART3 | | UART3 | ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |}{{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><!-- | </includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><!-- | ||
--><section begin=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial FreeRTOS 2.11.1 release for Cortex-M4 core of DART-MX8M-MINI | |||
|- | |||
| '''Tests conducted on:''' | |||
|- | |||
| GPIO/LED | |||
|- | |||
| I2C4 | |||
|- | |||
| PWM3 | |||
|- | |||
| UART3 | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><!-- | |||
--><section begin=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-MINI/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial FreeRTOS 2.12.1 release for Cortex-M4 core of DART-MX8M-MINI | |||
|- | |||
| '''Tests conducted on:''' | |||
|- | |||
| GPIO/LED | |||
|- | |||
| I2C4 | |||
|- | |||
| PWM3 | |||
|- | |||
| UART3 | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-MINI/><!-- | |||
--><section begin=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial FreeRTOS 2.13.0 release for Cortex-M4 core of DART-MX8M-MINI | |||
|- | |||
| '''Tests conducted on:''' | |||
|- | |||
| GPIO/LED | |||
|- | |||
| I2C4 | |||
|- | |||
| PWM3 | |||
|- | |||
| UART3 | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI/><!-- | |||
--><section begin=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-MINI/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial FreeRTOS 2.15.0 release for Cortex-M4 core of DART-MX8M-MINI | |||
|- | |||
| '''Tests conducted on:''' | |||
|- | |||
| GPIO/LED | |||
|- | |||
| I2C4 | |||
|- | |||
| PWM3 | |||
|- | |||
| UART3 | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-MINI/><!-- | |||
--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><includeonly> | --><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><includeonly> | ||
Line 763: | Line 1,338: | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> || | | <span {{#var:STYLE_RELEASE}}>Release 1.6</span> || | ||
|- | |- | ||
| Added support for VAR-SOM-MX8M-MINI revision 1.3 | | Added support for VAR-SOM-MX8M-MINI revision 1.3 || | ||
|- | |- | ||
| CAN: Upgraded the MCP251XFD CAN driver || | | CAN: Upgraded the MCP251XFD CAN driver || | ||
Line 805: | Line 1,380: | ||
| Added a new boot animation || | | Added a new boot animation || | ||
|- | |- | ||
| Framework auto focus support || | | Framework auto focus support || | ||
|- | |- | ||
| '''U-Boot:''' || | | '''U-Boot:''' || | ||
Line 842: | Line 1,417: | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> || | | <span {{#var:STYLE_RELEASE}}>Release 1.6</span> || | ||
|- | |- | ||
| Added support for VAR-SOM-MX8M-MINI revision 1.3 | | Added support for VAR-SOM-MX8M-MINI revision 1.3 || | ||
|- | |- | ||
| CAN: Upgraded the MCP251XFD CAN driver || | | CAN: Upgraded the MCP251XFD CAN driver || | ||
Line 884: | Line 1,459: | ||
| Added a new boot animation || | | Added a new boot animation || | ||
|- | |- | ||
| Framework auto focus support || | | Framework auto focus support || | ||
|- | |- | ||
| '''U-Boot:''' || | | '''U-Boot:''' || | ||
Line 955: | Line 1,530: | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | | <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | ||
|- | |- | ||
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini | | Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini || | ||
|- | |- | ||
! Known Issues !! | ! Known Issues !! | ||
Line 1,184: | Line 1,759: | ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |}{{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><!-- | </includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><!-- | ||
--><section begin=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| gpio: pca953x: Introduce standard-regs-fallback property || | |||
|- | |||
| gpio: pca953x: Introduce support for nxp,pcal6408 || | |||
|- | |||
| Remap buttons || Home maps to Android Home page, Up maps to Volume Up and Down maps to Volume Down | |||
|- | |||
| Fix suspend resume issue || | |||
|- | |||
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frame API || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| WiFi hotspot SSID broadcast not working reliably || | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><!-- | |||
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><includeonly> | --><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><includeonly> | ||
Line 1,192: | Line 1,798: | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | | <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | ||
|- | |- | ||
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini | | Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini || | ||
|- | |- | ||
! Known Issues !! | ! Known Issues !! | ||
|- | |- | ||
| WiFi hotspot SSID broadcast not working reliably || | | WiFi hotspot SSID broadcast not working reliably || | ||
|- | |- | ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |}{{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><!-- | </includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><!-- | ||
--><section begin=RELEASE_11.0. | --><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><includeonly> | ||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| WiFi hotspot SSID broadcast not working reliably || | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><!-- | |||
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Add delay to detect ADIN PHY || | |||
|- | |||
|'''Linux updates updates''' || | |||
|- | |||
| Enable ADIN PHY support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| WiFi hotspot SSID broadcast not working reliably || | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><!-- | |||
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Refactor code to detect ADIN PHY || Moved delay to device tree node | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Add delay to detect ADIN PHY || | |||
|- | |||
|'''Linux updates updates''' || | |||
|- | |||
| Enable ADIN PHY support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| WiFi hotspot SSID broadcast not working reliably || | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><!-- | |||
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><includeonly> | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
! Change List !! Description | ! Change List !! Description | ||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| ADIN1300: Disable RGMII RX clock delay || | |||
|- | |||
| imx8mm-var-dart: read carrier_rev from eeprom || | |||
|- | |||
| Set AR8033 VDDH_REG to 1.8V || | |||
|- | |||
|'''Linux updates updates''' || | |||
|- | |||
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Refactor code to detect ADIN PHY || Moved delay to device tree node | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Add delay to detect ADIN PHY || | |||
|- | |||
|'''Linux updates updates''' || | |||
|- | |||
| Enable ADIN PHY support || | |||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | | <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | ||
|- | |- | ||
| | | Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery | ||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| WiFi hotspot SSID broadcast not working reliably || | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><!-- | |||
--><section begin=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |- | ||
| | | <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | ||
|- | |||
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| WiFi hotspot SSID broadcast not working reliably || | |||
|- | |- | ||
| | |}{{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><!-- | |||
--><section begin=mx8mm-android-11.0.0_2.6.0-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |- | ||
! Change List !! Description | |||
|- | |- | ||
| | | <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | ||
|- | |- | ||
| | | Android install script and machine name changes || | ||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | | <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | ||
|- | |- | ||
| Initial release based on NXP's android-11.0. | | Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini || | ||
|- | |- | ||
! Known Issues !! | ! Known Issues !! | ||
|- | |- | ||
| WiFi hotspot SSID broadcast not working reliably || | | WiFi hotspot SSID broadcast not working reliably || | ||
|- | |- | ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |}{{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end= | </includeonly><section end=mx8mm-android-11.0.0_2.6.0-v1.1/><!-- | ||
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.0/><!-- | |||
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.1}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.1/><!-- | |||
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.2}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.2/><!-- | |||
<!-- | |||
--><section begin=mx8mm-android-13.0.0_1.0.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-13.0.0_1.0.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-13.0.0_1.0.0-v1.0/><!-- | |||
--><section begin=mx8mm-android-13.0.0_1.0.0-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-13.0.0_1.0.0-v1.1}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-13.0.0_1.0.0-v1.1/><!-- | |||
--><section begin=mx8mm-android-14.0.0_1.0.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-14.0.0_1.0.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-14.0.0_1.0.0-v1.0/><!-- | |||
--><section begin=mx8mm-android-14.0.0_1.0.0-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-14.0.0_1.0.0-v1.1}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-14.0.0_1.0.0-v1.1/><!-- |
Latest revision as of 14:44, 18 September 2024
DART-MX8M-MINI
/ VAR-SOM-MX8M-MINI Release Notes
Yocto warrior-fsl-4.19.35-mx8mm-v1.1
Release Notes
Based on release | Yocto: Poky 2.7, BSP: NXP L4.19.35-1.1.0, Linux: imx_4.19.35_1.1.0 |
Release tag | warrior-fsl-4.19.35-mx8mm-v1.1 |
Release manifest | imx-4.19.35-1.1.0-var01.xml |
Date | 9/23/2020 |
Supported platforms | DART-MX8M-MINI / VAR-SOM-MX8M-MINI |
SOM revision | v1.0 and higher |
File System build system | Yocto Warrior |
Recovery SD card link | dart-mx8mm-recovery-sd.v32.img.gz |
Relevant git Repositories
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
Change List |
---|
Release 1.1 |
Yocto updates |
Added an image with Docker support |
fsl-image-qt5: allow building the toolchain using populate_sdk |
Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies |
Kernel updates |
Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP) |
Kernel defconfig: Extend Docker features |
U-Boot updates |
SPL: Disabled SD card detect pin |
Fixed M4 binary loading when using the TCM |
Release 1.0 |
Upgraded to NXP BSP release 4.19.35_1.1.0 |