DART-MX8M-MINI Release Notes: Difference between revisions

From Variscite Wiki
(RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI)
No edit summary
 
(113 intermediate revisions by 12 users not shown)
Line 102: Line 102:
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
|-
| '''Yocto Updates'''
| '''Yocto updates'''
|-
|-
| Added an image with Docker support
| Added an image with Docker support
|-
|-
| fsl-image-qt5: allow building the toolchain using populate_sdk
| fsl-image-qt5: allow building the toolchain using populate_sdk
|-
|-
| Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies
| Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies
|-
|-
| '''Kernel Updates'''
| '''Kernel updates'''
|-
|-
| Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP)
| Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP)
Line 116: Line 116:
| Kernel defconfig: Extend Docker features
| Kernel defconfig: Extend Docker features
|-
|-
| '''U-Boot Updates'''
| '''U-Boot updates'''
|-
|-
| SPL: Disabled SD card detect pin
| SPL: Disabled SD card detect pin
Line 126: Line 126:
| Upgraded to NXP BSP release 4.19.35_1.1.0
| Upgraded to NXP BSP release 4.19.35_1.1.0
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><!--
--><section begin=mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0/><!--
--><section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1}}
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/><!--
--><section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI}}
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''meta-variscite-boot2qt''' ||
|-
| Update to Qt 6.0.4 ||
|-
| b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools ||
|-
| manifest: meta-variscite-fslc: Update to latest ||
|-
| '''U-Boot''' ||
|-
| imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues
|-
| imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot ||
|-
| imx8mm_var_dart: Set console environment variable in the default environment ||
|-
| '''Linux''' ||
|-
| Upgraded to version 5.4.142 ||
|-
| imx8_var_defconfig: add full docker support ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
| Revert "gpio: pca953x: Disable PM routines" ||
|-
| ARM: configs: Variscite: Enable USB_HSIC_USB3053 ||
|-
| ARM: configs: Variscite: disable EVBUG module ||
|-
| ARM64: dts: imx8: Variscite: add WM8904 DRC support for all SoMs ||
|-
| ASoC: wm8904: add DMIC support ||
|-
| ASoC: wm8904: extend device tree support ||
|-
| Revert "ASoC: wm8904: add DMIC support and allow enabling it" ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| First B2Qt Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.1_DART-MX8M-MINI/><!--


--><section begin=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/><includeonly>
Line 294: Line 395:
| Added a new boot animation ||
| Added a new boot animation ||
|-
|-
| Framework auto focus support ||
| Framework auto focus support ||
|-
|-
| '''U-Boot:''' ||
| '''U-Boot:''' ||
Line 369: Line 470:
| Dual Display Support || LVDS, LVDS + DP, LVDS + HDMI combination supported
| Dual Display Support || LVDS, LVDS + DP, LVDS + HDMI combination supported
|-
|-
| '''Debian Build Updates:''' ||  
| '''Debian Build updates:''' ||  
|-
|-
| Align mx8_install_debian.sh to lastest mx8_install_yocto.sh ||  
| Align mx8_install_debian.sh to lastest mx8_install_yocto.sh ||  
Line 401: Line 502:
| Move rpmsg area at 0x40000000 ||  
| Move rpmsg area at 0x40000000 ||  
|-
|-
| '''Debian Build Updates:''' ||  
| '''Debian Build updates:''' ||  
|-
|-
| Rename debian-emmc.sh -> install_debian.sh  ||  
| Rename debian-emmc.sh -> install_debian.sh  ||  
Line 445: Line 546:
| Initial Debian Buster release ||  
| Initial Debian Buster release ||  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><!--
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''U-Boot updates''' ||
|-
| imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues
|-
| '''Linux kernel updates''' ||
|-
| Updated to version 5.4.142 || Merge remote-tracking branch 'fslc/5.4-2.1.x-imx' into 5.4-2.1.x-imx_var01
|-
| imx8_var_defconfig: add full docker support ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| Revert "Revert "gpio: pca953x: Disable PM routines"" ||
|-
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
| '''Debian updates:''' ||
|-
| pulesaudio: Fix pulseaudio system-wide mode ||
|-
| systemd: set HandlePowerKey to ignore ||
|-
| freertos-variscite: Add initial support for imx8mm ||
|-
| deb: Add bluez-alsa 3.0.0 aligned to Dunfell release ||
|-
| bluez-alsa: ported bluez-alsa support from yocto-dunfell ||
|-
| weston_rootfs: Add libgpiod and libgpiod tools ||
|-
| imx8: libgbm1 updated to 20.3.4-1 required by latest weston update ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| ''' Linux kernel updates:''' ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| '''U-Boot updates:''' ||
|-
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch ||
|-
| '''Debian build updates:''' ||
|-
| Fix package dependencies and clean up ||
|-
| Clean-up /tmp in the rootfs after building the Linux kernel headers package ||
|-
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia ||
|-
| Updated imx-firmware version to 8.8 ||
|-
| Updated Wi-Fi and BT firmware to Laird release 8.2.0.16 ||
|-
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch ||
|-
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.1/><!--
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.2/><!--
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.3}}
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.3/><!--
--><section begin=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0/><!--
--><section begin=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1}}
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1/><!--


--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
Line 455: Line 669:
| Initial Debian Bullseye release ||  
| Initial Debian Bullseye release ||  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><!--
--><section begin=RELEASE_BULLSEYE_V2.0_DART-MX8M-MINI/><includeonly>
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.0/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
|-
|-
| ''' Linux kernel updates:''' ||
| ''' Linux kernel updates:''' ||
Line 491: Line 705:
|-
|-
| imx-mkimage: Update patch to align to Yocto Dunfell ||
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.0/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V2.0_DART-MX8M-MINI/><!--


--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
Line 584: Line 797:
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|-
| meta-variscite-fslc: freertos-variscite: Add 2.10.x support for imx8mm ||
| '''Yocto updates''' ||
|-
|-
| meta-variscite-fslc: swupdate: workaround for UTF8 compatibility in libarchive ||
| freertos-variscite: Add 2.10.x support for imx8mm ||
|-
|-
| meta-variscite-fslc: conf: variscite.inc: Use WKS_FILE instead of SOC_DEFAULT_WKS_FILE ||
| swupdate: workaround for UTF8 compatibility in libarchive ||
|-
|-
| meta-variscite-fslc: bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
| bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
|-
|-
| meta-variscite-fslc: fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
|-
|-
| meta-variscite-fslc: bcm43xx-utils: Consolidate WIFI scripts ||
| bcm43xx-utils: Consolidate WIFI scripts ||
|-
|-
| meta-variscite-fslc: wl18xx-utils: Move Variscite IMX6 BT scripts from bluez5 to new wl18xx-utils package ||
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
|-
|-
| meta-variscite-fslc: bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
| variscite-bt: Create SOM specific BT init scripts ||
|-
|-
| meta-variscite-fslc: variscite-bt: Create SOM specific BT init scripts ||
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
|-
| meta-variscite-fslc: fsl-image-gui: Add libgpiod and libgpiod-tools ||
| '''Linux updates''' ||
|-
|-
| linux: imx8mm-var-dart: Introduce support for pcal6408
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
|-
| linux: gpio: pca953x: Introduce standard-regs-fallback property
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
|-
| linux: gpio: pca953x: Introduce support for nxp,pcal6408
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
|-
| linux: sn65dsi83: Add device tree property to swap LVDS Channel A/B
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
|-
| linux: imx8mm-var-som: Disable usbotg1 hnp, srp, and adp
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
|-
| linux: imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI/><!--
--><section begin=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
| Add delay to detect ADIN PHY ||
|-
| '''Linux updates updates''' ||
|-
| Enable driver for ADIN PHY ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Yocto updates''' ||
|-
| freertos-variscite: Add 2.10.x support for imx8mm ||
|-
| swupdate: workaround for UTF8 compatibility in libarchive ||
|-
| bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
|-
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
|-
| bcm43xx-utils: Consolidate WIFI scripts ||
|-
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
|-
| variscite-bt: Create SOM specific BT init scripts ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| '''Linux updates''' ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/><!--
--><section begin=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
| Add delay to detect ADIN PHY ||
|-
| '''Linux updates updates''' ||
|-
| Enable driver for ADIN PHY ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Yocto updates''' ||
|-
| freertos-variscite: Add 2.10.x support for imx8mm ||
|-
| swupdate: workaround for UTF8 compatibility in libarchive ||
|-
| bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
|-
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
|-
| bcm43xx-utils: Consolidate WIFI scripts ||
|-
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
|-
| variscite-bt: Create SOM specific BT init scripts ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| '''Linux updates''' ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/><!--
--><section begin=RELEASE_HARDKNOTT_V1.4_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| '''U-Boot updates''' ||
|-
|  ADIN1300: Disable RGMII RX clock delay ||
|-
| imx8mm-var-dart: read carrier_rev from eeprom ||
|-
| '''Linux updates''' ||
|-
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
| Add delay to detect ADIN PHY ||
|-
| '''Linux updates updates''' ||
|-
| Enable driver for ADIN PHY ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Yocto updates''' ||
|-
| freertos-variscite: Add 2.10.x support for imx8mm ||
|-
| swupdate: workaround for UTF8 compatibility in libarchive ||
|-
| bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
|-
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
|-
| bcm43xx-utils: Consolidate WIFI scripts ||
|-
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
|-
| variscite-bt: Create SOM specific BT init scripts ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| '''Linux updates''' ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.4_DART-MX8M-MINI/><!--
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0/><!--
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/><!--
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/><!--
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/><!--
--><section begin=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/><!--
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/><!--


--><section begin=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 750: Line 1,245:
| UART3
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><!--  
</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.11.1 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.12.1 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.13.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.15.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-MINI/><!--


--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><includeonly>
--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><includeonly>
Line 759: Line 1,338:
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
|-
| CAN: Upgraded the MCP251XFD CAN driver ||
| CAN: Upgraded the MCP251XFD CAN driver ||
Line 801: Line 1,380:
| Added a new boot animation ||
| Added a new boot animation ||
|-
|-
| Framework auto focus support ||
| Framework auto focus support ||
|-
|-
| '''U-Boot:''' ||
| '''U-Boot:''' ||
Line 838: Line 1,417:
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
|-
| CAN: Upgraded the MCP251XFD CAN driver ||
| CAN: Upgraded the MCP251XFD CAN driver ||
Line 880: Line 1,459:
| Added a new boot animation ||
| Added a new boot animation ||
|-
|-
| Framework auto focus support ||
| Framework auto focus support ||
|-
|-
| '''U-Boot:''' ||
| '''U-Boot:''' ||
Line 951: Line 1,530:
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini ||
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini ||
|-
|-
! Known Issues !!
! Known Issues !!
Line 1,180: Line 1,759:
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><!--
</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><!--
--><section begin=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| Remap buttons || Home maps to Android Home page, Up maps to Volume Up and Down maps to Volume Down
|-
| Fix suspend resume issue ||
|-
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frame API ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><!--


--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
Line 1,188: Line 1,798:
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
|-
! Known Issues !!
! Known Issues !!
|-  
|-  
| WiFi hotspot SSID broadcast not working reliably || It is a known issue on NXP devkit
| WiFi hotspot SSID broadcast not working reliably ||
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><!--
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><!--
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><!--
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><!--
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><!--
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| '''U-Boot updates''' ||
|-
| ADIN1300: Disable RGMII RX clock delay ||
|-
| imx8mm-var-dart: read carrier_rev from eeprom ||
|-
| Set AR8033 VDDH_REG to 1.8V ||
|-
|'''Linux updates updates''' ||
|-
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><!--
--><section begin=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><!--
--><section begin=mx8mm-android-11.0.0_2.6.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Android install script and machine name changes ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=mx8mm-android-11.0.0_2.6.0-v1.1/><!--
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.0/><!--
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.1/><!--
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.2/><!--
<!--
--><section begin=mx8mm-android-13.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-13.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-13.0.0_1.0.0-v1.0/><!--
--><section begin=mx8mm-android-13.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-13.0.0_1.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-13.0.0_1.0.0-v1.1/><!--
--><section begin=mx8mm-android-14.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-14.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-14.0.0_1.0.0-v1.0/><!--
--><section begin=mx8mm-android-14.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-14.0.0_1.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-14.0.0_1.0.0-v1.1/><!--

Latest revision as of 14:44, 18 September 2024


DART-MX8M-MINI / VAR-SOM-MX8M-MINI Release Notes

Yocto warrior-fsl-4.19.35-mx8mm-v1.1

Release Notes

Based on release Yocto: Poky 2.7, BSP: NXP L4.19.35-1.1.0, Linux: imx_4.19.35_1.1.0
Release tag warrior-fsl-4.19.35-mx8mm-v1.1
Release manifest imx-4.19.35-1.1.0-var01.xml
Date 9/23/2020
Supported platforms DART-MX8M-MINI / VAR-SOM-MX8M-MINI
SOM revision v1.0 and higher
File System build system Yocto Warrior
Recovery SD card link dart-mx8mm-recovery-sd.v32.img.gz

Relevant git Repositories

Source Repository Branch Commit ID
U-Boot https://github.com/varigit/uboot-imx imx_v2019.04_4.19.35_1.1.0-var01 3e1643239fb11297209254dbaa803425cf0c1702
Kernel https://github.com/varigit/linux-imx imx_4.19.35_1.1.0_var01 dc7a2fde4ab056303e2011347438bdae23036c5e
meta-variscite-imx https://github.com/varigit/meta-variscite-imx warrior-imx-4.19.35-var01 207ebb821ab9d1942df73f6d1b294884359ea626


After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List
Release 1.1
Yocto updates
Added an image with Docker support
fsl-image-qt5: allow building the toolchain using populate_sdk
Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies
Kernel updates
Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP)
Kernel defconfig: Extend Docker features
U-Boot updates
SPL: Disabled SD card detect pin
Fixed M4 binary loading when using the TCM
Release 1.0
Upgraded to NXP BSP release 4.19.35_1.1.0


Retrieved from "https://variwiki.com/index.php?title=DART-MX8M-MINI_Release_Notes&oldid=27043"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 18 September 2024, at 14:44.

© 2024 Variscite. All rights reserved