VAR-SOM-MX8M-NANO Release Notes: Difference between revisions

From Variscite Wiki
No edit summary
(VAR-SOM-MX8M-NANO: Add support for Debian Bookworm based on Yocto 6.1.36-2.1.0)
 
(53 intermediate revisions by 10 users not shown)
Line 1: Line 1:
<!--
<!--
--> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!--                                          Set RELEASE_PARAM from url parameter
--> {{INIT_RELEASE_PARAM|RELEASE_ZEUS_V2.0_VAR-SOM-MX8M-NANO}}<!--
--> {{#vardefine:RELEASE_PARAM|{{#var:RELEASE_PARAM|RELEASE_ZEUS_V2.0_VAR-SOM-MX8M-NANO}}}} <!--   If RELEASE_PARAM unset, default to something
--> {{#lst:Release_Notes_Template|Release_Notes_Header}} <!--                                      Include common release notes template
--> {{#lst:Release_Notes_Template|Release_Notes_Header}} <!--                                      Include common release notes template


Line 186: Line 185:
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8M-NANO/><!--
</includeonly><section end=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8M-NANO/><!--
--><section begin=RELEASE_11.0.0_1.0.0_VAR_SOM-MX8M-NANO_V1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| kernel: imx8mn-var-som: update the polarity of OV5640 camera reset GPIO ||
|-
| kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| kernel: ads7846: fix the pressure_max setting ||
|-
| mx8_install_android.sh: imx8mn-var-som: update board identification ||
|-
| sepolicy: Fix for WiFi upon resume from suspend ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Nano ||
|-
! Known Issues !!
|-
| WiFi Hotspot and WiFi client can't be used together|| It is a WiFi module limitation
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_VAR_SOM-MX8M-NANO_V1.1/><!--
--><section begin=RELEASE_11.0.0_1.0.0_VAR_SOM-MX8M-NANO_V1.0/><includeonly>
--><section begin=RELEASE_11.0.0_1.0.0_VAR_SOM-MX8M-NANO_V1.0/><includeonly>
{| class="wikitable"
{| class="wikitable"
Line 201: Line 231:
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_VAR_SOM-MX8M-NANO_V1.0/><!--
</includeonly><section end=RELEASE_11.0.0_1.0.0_VAR_SOM-MX8M-NANO_V1.0/><!--
--><section begin=RELEASE_10.0.0_2.3.0_GA_VAR_SOM-MX8M-NANO/><includeonly>
--><section begin=RELEASE_10.0.0_2.3.0_GA_VAR_SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
{| class="wikitable"
Line 305: Line 337:
| Initial Debian Bullseye release ||  
| Initial Debian Bullseye release ||  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_VAR-SOM-MX8M-NANO/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_VAR-SOM-MX8M-NANO/><!--
--><section begin=RELEASE_BULLSEYE_5.4.142_V1.0_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| ''' Linux kernel updates:''' ||
|-
| Updated to version 5.4.142 ||
|-
| imx8_var_defconfig: enable driver for ADIN PHY ||
|-
| imx8mn-var-som: update the polarity of camera reset GPIO ||
|-
| imx8_var_defconfig: add full docker support ||
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| ARM: configs: Variscite: update to latest docker requirements ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| '''U-Boot updates:''' ||
|-
| imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY ||
|-
| variscite: imx8_eeprom: align eeprom features to SoM families ||
|-
| imx8: ahab: Only compile ahab.c for u-boot ||
|-
| ahab: Make authenticate_os_container static ||
|-
| imx8mn-var-som: Move CONFIG_CSF_SIZE to imx8mn_var_som_defconfig ||
|-
| '''Debian build updates:''' ||
|-
| imx8mn-var-som: Fix weston package selection ||
|-
|  weston_rootfs.sh: Fix cleanup on header-stage ||
|-
| imx8mn-var-som: Update Debian snapshot to latest  ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_5.4.142_V1.0_VAR-SOM-MX8M-NANO/><!--
--><section begin=RELEASE_BULLSEYE_V2.1_VAR-SOM-MX8M-NANO/><includeonly>
--><section begin=RELEASE_BULLSEYE_V2.1_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
{| class="wikitable"
Line 405: Line 485:
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V2.0_VAR-SOM-MX8M-NANO/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V2.0_VAR-SOM-MX8M-NANO/><!--
--><section begin=mx8mn-debian-bookworm-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_VAR-SOM-MX8M-NANO|RN_mx8mn-debian-bookworm-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-debian-bookworm-6.1.36_2.1.0-v1.0/><!--


--><section begin=MCUXPRESSO_2.7.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly>  
--><section begin=MCUXPRESSO_2.7.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly>  
Line 454: Line 541:
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_VAR-SOM-MX8M-NANO/><!--
</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_VAR-SOM-MX8M-NANO/><!--


--><section begin=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly>
--><section begin=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly>
Line 479: Line 565:
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8M-NANO/><!--
</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8M-NANO/><!--
--><section begin=MCUXPRESSO_2.10.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.10.0 release for Cortex-M7 core of VAR-SOM-MX8M-NANO
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|-
| RPMSG
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_VAR-SOM-MX8M-NANO/><!--
--><section begin=MCUXPRESSO_2.11.1_V1.0_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.11.1 release for Cortex-M7 core of VAR-SOM-MX8M-NANO
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|-
| RPMSG
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.11.1_V1.0_VAR-SOM-MX8M-NANO/><!--
--><section begin=MCUXPRESSO_2.12.1_V1.0_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.12.1 release for Cortex-M7 core of VAR-SOM-MX8M-NANO
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|-
| ECSPI1
|-
| RPMSG
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.12.1_V1.0_VAR-SOM-MX8M-NANO/><!--
--><section begin=MCUXPRESSO_2.13.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.13.0 release for Cortex-M7 core of VAR-SOM-MX8M-NANO
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|-
| ECSPI1
|-
| RPMSG
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.13.0_V1.0_VAR-SOM-MX8M-NANO/><!--
--><section begin=MCUXPRESSO_2.15.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.15.0 release for Cortex-M7 core of VAR-SOM-MX8M-NANO
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|-
| ECSPI1
|-
| RPMSG
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.15.0_V1.0_VAR-SOM-MX8M-NANO/><!--


--><section begin=RELEASE_10.0.0_2.3.0_GA_VAR_SOM-MX8M-NANO_V1.4/><includeonly>
--><section begin=RELEASE_10.0.0_2.3.0_GA_VAR_SOM-MX8M-NANO_V1.4/><includeonly>
Line 651: Line 863:
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
|-
| Updated Kernel from 5.4.85 to 5.4.142
| Updated the kernel version from 5.4.85 to 5.4.142
|-
| Update Yocto meta layers to latest:
 
yocto/poky
 
yocto/meta-freescale
 
oe/meta-openembedded
 
oe/meta-python2
 
freescale/meta-freescale-3rdparty
 
freescale/meta-freescale-distro
 
freescale/Documentation
 
QT5/meta-qt5
 
sbabic/meta-swupdate
 
yocto/meta-virtualization
 
varigit/meta-variscite-fslc
|-
| linux-firmware: update TI WL18xx BT service pack to v4.7
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7
|-
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
Line 693: Line 937:
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8M-NANO/><!--
</includeonly><section end=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8M-NANO/><!--
--><section begin=RELEASE_DUNFELL_V1.6_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
|-
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
| meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support for imx8mn, imx8mm and imx8mq ||
|-
| kernel: imx8mn-var-som: update the polarity of OV5640 camera reset GPIO ||
|-
| kernel: imx8_var_defconfig: add full docker support ||
|-
| kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| kernel: ads7846: fix the pressure_max setting ||
|-
| kernel: sn65dsi83: allow swapping LVDS Channel A/B ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Updated the kernel version from 5.4.85 to 5.4.142 ||
|-
| Update Yocto meta layers to latest:
yocto/poky
yocto/meta-freescale
oe/meta-openembedded
oe/meta-python2
freescale/meta-freescale-3rdparty
freescale/meta-freescale-distro
freescale/Documentation
QT5/meta-qt5
sbabic/meta-swupdate
yocto/meta-virtualization
varigit/meta-variscite-fslc ||
|-
| linux-firmware: update TI WL18xx BT service pack to v4.7 ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| systemd: add dependencies to avoid conflict between connman and systemd-networkd ||
|-
| Move bbappend to dynamic layers ||
|-
|psplash: switch to using png images for logo and bar ||
|-
|pm-utils: wifi: force connman/wpa_supplicant restart ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Added support for VAR-SOM-MX8M-NANO revision 1.3 ||
|-
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
| Added support for VAR-SOM-MX8M-NANO on Symphony-Board 1.4A ||
|-
| Removed support for VAR-SOM-MX8M-NANO SOM rev. 1.0 ||
|-
| Fixed occasional pulseaudio device initialization problems ||
|-
| Re-added packages available in previous Yocto releases ||
|-
| Added Jailhouse support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for VAR-SOM-MX8M-NANO ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.6_VAR-SOM-MX8M-NANO/><!--
--><section begin=RELEASE_DUNFELL_V1.7_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
|-
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.7</span> ||
|-
| U-Boot: imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY ||
|-
| kernel: MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| kernel: imx8_var_defconfig: enable driver for ADIN PHY ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
| meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support for imx8mn, imx8mm and imx8mq ||
|-
| kernel: imx8mn-var-som: update the polarity of OV5640 camera reset GPIO ||
|-
| kernel: imx8_var_defconfig: add full docker support ||
|-
| kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| kernel: ads7846: fix the pressure_max setting ||
|-
| kernel: sn65dsi83: allow swapping LVDS Channel A/B ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Updated the kernel version from 5.4.85 to 5.4.142 ||
|-
| Update Yocto meta layers to latest:
yocto/poky
yocto/meta-freescale
oe/meta-openembedded
oe/meta-python2
freescale/meta-freescale-3rdparty
freescale/meta-freescale-distro
freescale/Documentation
QT5/meta-qt5
sbabic/meta-swupdate
yocto/meta-virtualization
varigit/meta-variscite-fslc ||
|-
| linux-firmware: update TI WL18xx BT service pack to v4.7 ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| systemd: add dependencies to avoid conflict between connman and systemd-networkd ||
|-
| Move bbappend to dynamic layers ||
|-
|psplash: switch to using png images for logo and bar ||
|-
|pm-utils: wifi: force connman/wpa_supplicant restart ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Added support for VAR-SOM-MX8M-NANO revision 1.3 ||
|-
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
| Added support for VAR-SOM-MX8M-NANO on Symphony-Board 1.4A ||
|-
| Removed support for VAR-SOM-MX8M-NANO SOM rev. 1.0 ||
|-
| Fixed occasional pulseaudio device initialization problems ||
|-
| Re-added packages available in previous Yocto releases ||
|-
| Added Jailhouse support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for VAR-SOM-MX8M-NANO ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.7_VAR-SOM-MX8M-NANO/><!--
--><section begin=RELEASE_DUNFELL_V1.8_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
|-
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.8</span> ||
|-
| U-Boot: variscite: eth: ADIN1300: Disable RGMII RX clock delay ||
|-
| kernel: imx8mn-var-som: fec: add 20ms phy-reset-post-delay ||
|-
| kernel: net: phy: adin: add adi,phy-mode-override property ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.7</span> ||
|-
| U-Boot: imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY ||
|-
| kernel: MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| kernel: imx8_var_defconfig: enable driver for ADIN PHY ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
| meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support for imx8mn, imx8mm and imx8mq ||
|-
| kernel: imx8mn-var-som: update the polarity of OV5640 camera reset GPIO ||
|-
| kernel: imx8_var_defconfig: add full docker support ||
|-
| kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| kernel: ads7846: fix the pressure_max setting ||
|-
| kernel: sn65dsi83: allow swapping LVDS Channel A/B ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Updated the kernel version from 5.4.85 to 5.4.142 ||
|-
| Update Yocto meta layers to latest:
yocto/poky
yocto/meta-freescale
oe/meta-openembedded
oe/meta-python2
freescale/meta-freescale-3rdparty
freescale/meta-freescale-distro
freescale/Documentation
QT5/meta-qt5
sbabic/meta-swupdate
yocto/meta-virtualization
varigit/meta-variscite-fslc ||
|-
| linux-firmware: update TI WL18xx BT service pack to v4.7 ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| systemd: add dependencies to avoid conflict between connman and systemd-networkd ||
|-
| Move bbappend to dynamic layers ||
|-
|psplash: switch to using png images for logo and bar ||
|-
|pm-utils: wifi: force connman/wpa_supplicant restart ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Added support for VAR-SOM-MX8M-NANO revision 1.3 ||
|-
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
| Added support for VAR-SOM-MX8M-NANO on Symphony-Board 1.4A ||
|-
| Removed support for VAR-SOM-MX8M-NANO SOM rev. 1.0 ||
|-
| Fixed occasional pulseaudio device initialization problems ||
|-
| Re-added packages available in previous Yocto releases ||
|-
| Added Jailhouse support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for VAR-SOM-MX8M-NANO ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.8_VAR-SOM-MX8M-NANO/><!--
--><section begin=mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0/><!--
--><section begin=mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
--><section begin=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0/><!--
--><section begin=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1}}
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1/><!--
--><section begin=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.2}}
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1}}
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.2/><!--
--><section begin=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
--><section begin=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.1}}
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.1/><!--
--><section begin=mx8mn-yocto-mickledore-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
--><section begin=mx8mn-b2qt-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_VAR-SOM-MX8M-NANO|RN_mx8mn-b2qt-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!--
--><section begin=mx8mn-b2qt-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_VAR-SOM-MX8M-NANO|RN_mx8mn-b2qt-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-b2qt-kirkstone-5.15-2.0.x-v1.0/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.2_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
|-
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''meta-variscite-boot2qt''' ||
|-
| Handle github dropping git:// support ||
|-
| '''U-Boot''' ||
|-
|imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY ||
|-
| '''Linux''' ||
|-
|MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| imx8_var_defconfig: enable driver for ADIN PHY ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''meta-variscite-boot2qt''' ||
|-
| Update to Qt 6.0.4 ||
|-
| b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools ||
|-
| '''meta-variscite-fslc''' ||
|-
| freertos-variscite: Add FreeRTOS 2.10.x support for imx8mn, imx8mm and imx8mq ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
| '''Linux''' ||
|-
| imx8mn-var-som: update the polarity of OV5640 camera reset GPIO ||
|-
| imx8_var_defconfig: add full docker support ||
|-
| Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| ads7846: fix the pressure_max setting ||
|-
| sn65dsi83: allow swapping LVDS Channel A/B ||
|-
| Updated the kernel version from 5.4.85 to 5.4.142 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| First Release ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.2_VAR-SOM-MX8M-NANO/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.1_VAR-SOM-MX8M-NANO/><includeonly>
{| class="wikitable"
|-
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''meta-variscite-boot2qt''' ||
|-
| Update to Qt 6.0.4 ||
|-
| b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools ||
|-
| '''meta-variscite-fslc''' ||
|-
| freertos-variscite: Add FreeRTOS 2.10.x support for imx8mn, imx8mm and imx8mq ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
| '''Linux''' ||
|-
| imx8mn-var-som: update the polarity of OV5640 camera reset GPIO ||
|-
| imx8_var_defconfig: add full docker support ||
|-
| Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| ads7846: fix the pressure_max setting ||
|-
| sn65dsi83: allow swapping LVDS Channel A/B ||
|-
| Updated the kernel version from 5.4.85 to 5.4.142 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| First Release ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.1_VAR-SOM-MX8M-NANO/><!--


--><section begin=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX8M-NANO/><includeonly>
--><section begin=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX8M-NANO/><includeonly>
Line 705: Line 1,436:
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX8M-NANO/><!--
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX8M-NANO/><!--
--><section begin=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Nano ||
|-
! Known Issues !!
|-
| The maximum camera resolution in this release is 720p ||
|-
| Cortex-M7 || Running Ping pong example leads to kernel crash
|-
| WiFi Hotspot and WiFi client can't be used together|| It is a WiFi module limitation
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.0/><!--
--><section begin=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Nano ||
|-
! Known Issues !!
|-
| The maximum camera resolution in this release is 720p ||
|-
| Cortex-M7 || Running Ping pong example leads to kernel crash
|-
| WiFi Hotspot and WiFi client can't be used together|| It is a WiFi module limitation
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.1/><!--
--><section begin=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
| net: drop common board_phy_config ||
|-
| imx8mn-var-som: Enable CONFIG_PHY_ADIN ||
|-
| phy: adin: add driver for Analog Devices ADIN1300 PHY ||
|-
| Revert "net: Introduce a delay before searching for phy address." ||
|-
|'''Linux updates''' ||
|-
| imx8mn-var-som: fec: add 20ms phy-reset-post-delay || Without a delay, the generic phy driver may be incorrectly used for adin1300 under some conditions.
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Nano ||
|-
! Known Issues !!
|-
| The maximum camera resolution in this release is 720p ||
|-
| Cortex-M7 || Running Ping pong example leads to kernel crash
|-
| WiFi Hotspot and WiFi client can't be used together|| It is a WiFi module limitation
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.2/><!--
--><section begin=mx8mn-android-12.0.0_2.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:APC_VAR-SOM-MX8M-NANO|RN_mx8mn-android-12.0.0_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-android-12.0.0_2.0.0-v1.0/><!--
--><section begin=mx8mn-android-12.0.0_2.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:APC_VAR-SOM-MX8M-NANO|RN_mx8mn-android-12.0.0_2.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-android-12.0.0_2.0.0-v1.1/><!--
--><section begin=mx8mn-android-14.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:APC_VAR-SOM-MX8M-NANO|RN_mx8mn-android-14.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-android-14.0.0_1.0.0-v1.0/><!--

Latest revision as of 21:43, 12 July 2024

Warning: This page is designed to be used with a 'release' URL parameter.

This page is using the default release RELEASE_ZEUS_V2.0_VAR-SOM-MX8M-NANO.
To view this page for a specific Variscite SoM and software release, please follow these steps:

  1. Visit variwiki.com
  2. Select your SoM
  3. Select the software release
VAR-SOM-MX8M-NANO Release Notes

Yocto zeus-fsl-5.4.24-mx8mn-v2.0

Release Notes

Based on release Yocto: Poky 3.0, BSP: NXP L5.4.24_2.1.0, Linux: imx_5.4.24_2.1.0
Release tag zeus-fsl-5.4.24-mx8mn-v2.0
Release manifest imx-5.4.24-2.1.0-var01.xml
Date 9/8/2020
Supported platforms VAR-SOM-MX8M-NANO
SOM revision v1.1 and higher
File System build system Yocto Zeus
Recovery SD card link var-som-mx8mn-recovery-sd.v30.img.gz

Relevant git Repositories

Source Repository Branch Commit ID
U-Boot https://github.com/varigit/uboot-imx imx_v2020.04_5.4.24_2.1.0_var01 3468740c9795aa237566ca6488b3594cb11805f2
Kernel https://github.com/varigit/linux-imx imx_5.4.24_2.1.0_var01 b95225fc36d099fe544ece5c2e772ab7de132863
meta-variscite-imx https://github.com/varigit/meta-variscite-imx zeus-imx-5.4.24-var01 9b47c53d5f30cd7e0cd6ab8c80c33ab216f5ef3a


After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List
Release 2.0
Initial Yocto Zeus with kernel 5.4.24 release for VAR-SOM-MX8M-NANO
Retrieved from "https://variwiki.com/index.php?title=VAR-SOM-MX8M-NANO_Release_Notes&oldid=26631"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 12 July 2024, at 21:43.

© 2024 Variscite. All rights reserved