DART-MX8M-PLUS Release Notes: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
 
(102 intermediate revisions by 14 users not shown)
Line 5: Line 5:


Instructions: Add a new change log section below for each release
Instructions: Add a new change log section below for each release
--><section begin=mx8mp-debian-bullseye-5.10.52_2.1.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-PLUS|RN_mx8mp-debian-bullseye-5.10.52_2.1.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-debian-bullseye-5.10.52_2.1.0-v1.1/><!--
--><section begin=mx8mp-debian-bullseye-5.10.52_2.1.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-PLUS|RN_mx8mp-debian-bullseye-5.10.52_2.1.0-v1.2}}
{{#lst:DPC_DART-MX8M-PLUS|RN_mx8mp-debian-bullseye-5.10.52_2.1.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-debian-bullseye-5.10.52_2.1.0-v1.2/><!--
--><section begin=mx8mp-debian-bookworm-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-PLUS|RN_mx8mp-debian-bookworm-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-debian-bookworm-6.1.36_2.1.0-v1.0/><!--
--><section begin=RELEASE_BULLSEYE_5.10.52_V1.0_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 3.0</span> ||
|-
| Updated Cortex-M7 support || fixed freertos-variscite to generate distinct firmware files for SOM and DART
|-
| Updated kernel to lf-5.10.y_var03 branch  ||
|-
| Updated U-Boot to lf_v2021.04_var02 branch ||
|-
| Updated gstreamer driver to MM_04.06.02_2108_L5.10.y  ||
|-
| Updated gst-plugin-base driver to MM_04.06.02_2108_L5.10.y  ||
|-
| Updated gst-plugin-good driver to MM_04.06.02_2108_L5.10.y  ||
|-
| Updated gst-plugin-bad driver to MM_04.06.02_2108_L5.10.y  ||
|-
| Updated gstreamer-imx driver to MM_04.06.02_2108_L5.10.y  ||
|-
| Updated imx-gpu-g2d driver to 6.4.3.p2.2  ||
|-
| Updated imx-codec driver to 4.6.2  ||
|-
| Updated imx-parser driver to 4.6.2  ||
|-
| Updated imx-vpuwrap driver to 4.6.2  ||
|-
| Updated imx-firmware to 8.13  ||
|-
| Updated imx-nn driver to 1.2.0  ||
|-
| Updated imx-vpu-hantro driver to 1.23.0  ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.2</span> ||
|-
| Update linux-variscite to latest version || imx8mp-var-dart: Introduced support for pcal6408<br>(pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A)
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||
|-
| Update u-boot-variscite to latest version || Aligned lpddr4_timing.c to latest version generated by RPA tool V6
|-
| Update linux-variscite to latest version || Added full Docker support<br>Added CAN support to M7 device trees<br>Fixed flexcan pinmux for DT8CustomBoard 1.x<br>Fixed PMIC IRQ iomux settings<br>Fix for VAR-SOM-MX8M-PLUS iomuxc pinctrl
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> ||
|-
| Added Cortex-M7 support ||
|-
| Updated kernel to imx_5.4.70_2.3.2_var01 branch  ||
|-
| Updated U-Boot to imx_v2020.04_5.4.70_2.3.2_var01 branch ||
|-
| Updated imx-vivante-gpu driver to latest 6.4.3.p1.4  ||
|-
| Updated imx-gpu-g2d driver to latest 6.4.3.p1.4  ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Debian Bullseye release ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_5.10.52_V1.0_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_BULLSEYE_V2.2_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.2</span> ||
|-
| Update linux-variscite to latest version || imx8mp-var-dart: Introduced support for pcal6408<br>(pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A)
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||
|-
| Update u-boot-variscite to latest version || Aligned lpddr4_timing.c to latest version generated by RPA tool V6
|-
| Update linux-variscite to latest version || Added full Docker support<br>Added CAN support to M7 device trees<br>Fixed flexcan pinmux for DT8CustomBoard 1.x<br>Fixed PMIC IRQ iomux settings<br>Fix for VAR-SOM-MX8M-PLUS iomuxc pinctrl
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> ||
|-
| Added Cortex-M7 support ||
|-
| Updated kernel to imx_5.4.70_2.3.2_var01 branch  ||
|-
| Updated U-Boot to imx_v2020.04_5.4.70_2.3.2_var01 branch ||
|-
| Updated imx-vivante-gpu driver to latest 6.4.3.p1.4  ||
|-
| Updated imx-gpu-g2d driver to latest 6.4.3.p1.4  ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Debian Bullseye release ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V2.2_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_BULLSEYE_V2.1_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||
|-
| Update u-boot-variscite to latest version || Aligned lpddr4_timing.c to latest version generated by RPA tool V6
|-
| Update linux-variscite to latest version || Added full Docker support<br>Added CAN support to M7 device trees<br>Fixed flexcan pinmux for DT8CustomBoard 1.x<br>Fixed PMIC IRQ iomux settings<br>Fix for VAR-SOM-MX8M-PLUS iomuxc pinctrl
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> ||
|-
| Added Cortex-M7 support ||
|-
| Updated kernel to imx_5.4.70_2.3.2_var01 branch  ||
|-
| Updated U-Boot to imx_v2020.04_5.4.70_2.3.2_var01 branch ||
|-
| Updated imx-vivante-gpu driver to latest 6.4.3.p1.4  ||
|-
| Updated imx-gpu-g2d driver to latest 6.4.3.p1.4  ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Debian Bullseye release ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V2.1_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_BULLSEYE_V2.0_DART-MX8M-PLUS/><includeonly>
--><section begin=RELEASE_BULLSEYE_V2.0_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
{| class="wikitable"
Line 14: Line 161:
| Added Cortex-M7 support ||
| Added Cortex-M7 support ||
|-
|-
| Updateed kernel to imx_5.4.70_2.3.2_var01 branch  ||
| Updated kernel to imx_5.4.70_2.3.2_var01 branch  ||
|-
|-
| Updated U-Boot to imx_v2020.04_5.4.70_2.3.2_var01 branch ||
| Updated U-Boot to imx_v2020.04_5.4.70_2.3.2_var01 branch ||
Line 75: Line 222:
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_10.0.0_2.5.0_DART-MX8M-PLUS_V1.0/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_10.0.0_2.5.0_DART-MX8M-PLUS_V1.0/><!--


--><section begin=mx8mp-android-11.0.0_2.6.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-PLUS|RN_mx8mp-android-11.0.0_2.6.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-android-11.0.0_2.6.0-v1.1/><!--
--><section begin=mx8mp-android-11.0.0_2.6.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-PLUS|RN_mx8mp-android-11.0.0_2.6.0-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-android-11.0.0_2.6.0-v1.2/><!--
--><section begin=mx8mp-android-13.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-PLUS|RN_mx8mp-android-13.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-android-13.0.0_1.0.0-v1.0/><!--
--><section begin=mx8mp-android-13.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-PLUS|RN_mx8mp-android-13.0.0_1.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-android-13.0.0_1.0.0-v1.1/><!--
--><section begin=mx8mp-android-12.0.0_1.0.0-v2.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-PLUS|RN_mx8mp-android-12.0.0_1.0.0-v2.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-android-12.0.0_1.0.0-v2.0/><!--
--><section begin=mx8mp-android-12.0.0_1.0.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-PLUS|RN_mx8mp-android-12.0.0_1.0.0-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-android-12.0.0_1.0.0-v1.2/><!--
--><section begin=mx8mp-android-12.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-PLUS|RN_mx8mp-android-12.0.0_1.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-android-12.0.0_1.0.0-v1.1/><!--
--><section begin=mx8mp-android-12.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-PLUS|RN_mx8mp-android-12.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-android-12.0.0_1.0.0-v1.0/><!--
--><section begin=mx8mp-android-14.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-PLUS|RN_mx8mp-android-14.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-android-14.0.0_1.0.0-v1.0/><!--
--><section begin=mx8mp-android-14.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-PLUS|RN_mx8mp-android-14.0.0_1.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-android-14.0.0_1.0.0-v1.1/><!--


--><section begin=RELEASE_ZEUS_V2.0_DART-MX8M-PLUS/><includeonly>
--><section begin=RELEASE_ZEUS_V2.0_DART-MX8M-PLUS/><includeonly>
Line 151: Line 375:
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-PLUS_V1.1/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-PLUS_V1.1/><!--
--><section begin=RELEASE_10.0.0_2.6.0_DART-MX8M-PLUS_V1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Fix BT power on issue with LWB wifi + BT module || Re-structure BT init script for loading proper BT firmware over UART
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| U-Boot: Disabled the 2nd Ethernet in U-Boot by default for DART-MX8M-PLUS and VAR-SOM-MX8M-PLUS || This prevents a U-Boot crash on SOM configurations without a 2nd Ethernet PHY
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-10.0.0_2.6.0 for the i.MX8M Plus ||
|-
! Known Issues !!
|-
| Youtube streaming freeze for videos with ads || Known issue in this NXP Android release
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-PLUS_V1.2/><!--
--><section begin=RELEASE_10.0.0_2.6.0_DART-MX8M-PLUS_V1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Update BT power on generic settlement delay to 200 msec for LWB wifi + BT module || This fixes the bluetooth power on issue on certain LWB module soms
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Fix BT power on issue with LWB wifi + BT module || Re-structure BT init script for loading proper BT firmware over UART
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| U-Boot: Disabled the 2nd Ethernet in U-Boot by default for DART-MX8M-PLUS and VAR-SOM-MX8M-PLUS || This prevents a U-Boot crash on SOM configurations without a 2nd Ethernet PHY
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-10.0.0_2.6.0 for the i.MX8M Plus ||
|-
! Known Issues !!
|-
| Youtube streaming freeze for videos with ads || Known issue in this NXP Android release
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-PLUS_V1.3/><!--


--><section begin=RELEASE_ZEUS_V2.2_DART-MX8M-PLUS/><includeonly>
--><section begin=RELEASE_ZEUS_V2.2_DART-MX8M-PLUS/><includeonly>
Line 204: Line 477:
|-
|-
| Added Cortex-M7 support
| Added Cortex-M7 support
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial release based on NXP L5.4.70_2.3.2
|-
| Bluetooth A2DP: Replace pulseaudio with bluez-alsa
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_ZEUS_V3.1_DART-MX8M-PLUS/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_ZEUS_V3.1_DART-MX8M-PLUS/><!--


Line 215: Line 494:
| Initial release
| Initial release
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_ZEUS_B2QT_V1.0_DART-MX8M-PLUS/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_ZEUS_B2QT_V1.0_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_ZEUS_B2QT_V1.2_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Updated linux-variscite to latest version || Introduced support for pcal6408<br>(pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A)
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Updated u-boot-variscite to latest version || Aligned lpddr4_timing.c to latest version generated by RPA tool V6<br>Added m7 core environment
|-
| Updated linux-variscite to latest version || Added full Docker support<br>Added CAN support to M7 device trees<br>Fixed flexcan pinmux for DT8CustomBoard 1.x<br>Fixed PMIC IRQ iomux settings<br>Fix for VAR-SOM-MX8M-PLUS iomuxc pinctrl<br>Added WM8904 DRC support for all oMs<br>Added device trees for M7 configuration
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_ZEUS_B2QT_V1.2_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_ZEUS_B2QT_V1.1_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Update u-boot-variscite to latest version || Aligned lpddr4_timing.c to latest version generated by RPA tool V6<br>add m7 core enviroment
|-
| Update linux-variscite to latest version || Added full Docker support<br>Added CAN support to M7 device trees<br>Fixed flexcan pinmux for DT8CustomBoard 1.x<br>Fixed PMIC IRQ iomux settings<br>Fix for VAR-SOM-MX8M-PLUS iomuxc pinctrl<br>Added WM8904 DRC support for all SoMs<br>Added device trees for M7 configuration
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_ZEUS_B2QT_V1.1_DART-MX8M-PLUS/><!--
--><section begin=mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-PLUS|RN_mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-b2qt-zeus-5.4.70_2.3.2-v1.3/><!--
--><section begin=mx8mp-b2qt-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-PLUS|RN_mx8mp-b2qt-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!--
--><section begin=mx8mp-b2qt-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-PLUS|RN_mx8mp-b2qt-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-b2qt-kirkstone-5.15-2.0.x-v1.0/><!--


--><section begin=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-PLUS/><includeonly>
--><section begin=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-PLUS/><includeonly>
Line 241: Line 577:
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-PLUS/><!--
</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-PLUS/><!--
--><section begin=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.10.0 release for the Cortex-M7 core of the DART-MX8M-PLUS/VAR-SOM-MX8M-PLUS
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C3/I2C4
|-
| ECSPI1/ECSPI2
|-
| PWM3/PWM2
|-
| UART3/UART4
|-
| FLEXCAN1/FLEXCAN2
|-
| RPMSG
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-PLUS/><!--
--><section begin=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.11.1 release for the Cortex-M7 core of the DART-MX8M-PLUS/VAR-SOM-MX8M-PLUS
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C3/I2C4
|-
| ECSPI1/ECSPI2
|-
| PWM3/PWM2
|-
| UART3/UART4
|-
| FLEXCAN1/FLEXCAN2
|-
| RPMSG
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-PLUS/><!--
--><section begin=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.12.1 release for the Cortex-M7 core of the DART-MX8M-PLUS/VAR-SOM-MX8M-PLUS
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C3/I2C4
|-
| ECSPI1/ECSPI2
|-
| PWM3/PWM2
|-
| UART3/UART4
|-
| FLEXCAN1/FLEXCAN2
|-
| RPMSG
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-PLUS/><!--
--><section begin=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.13.0 release for the Cortex-M7 core of the DART-MX8M-PLUS/VAR-SOM-MX8M-PLUS
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C3/I2C4
|-
| ECSPI1/ECSPI2
|-
| PWM3/PWM2
|-
| UART3/UART4
|-
| FLEXCAN1/FLEXCAN2
|-
| RPMSG
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-PLUS/><!--
--><section begin=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.15.0 release for the Cortex-M7 core of the DART-MX8M-PLUS/VAR-SOM-MX8M-PLUS
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C3/I2C4
|-
| ECSPI1/ECSPI2
|-
| PWM3/PWM2
|-
| UART3/UART4
|-
| FLEXCAN1/FLEXCAN2
|-
| RPMSG
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-PLUS/><!--


--><section begin=RELEASE_11.0.0_1.2.0_DART-MX8M-PLUS_V1.0/><includeonly>
--><section begin=RELEASE_11.0.0_1.2.0_DART-MX8M-PLUS_V1.0/><includeonly>
Line 276: Line 752:
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_GATESGARTH_V1.0_DART-MX8M-PLUS/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_GATESGARTH_V1.0_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_HARDKNOTT_V1.0_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Yocto Hardknott based on NXP L5.10.35_2.0.0 release||(kernel 5.10.35)
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_HARDKNOTT_V1.0_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_HARDKNOTT_V1.1_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Fixed system hang after "ifconfig eth0 down"
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Hardknott based on NXP L5.10.35_2.0.0 release||(kernel 5.10.35)
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_HARDKNOTT_V1.1_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_HARDKNOTT_V1.2_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Fixed flexcan1 and flexcan2 pinmux for DT8CustomBoard 1.x ||
|-
| Added CAN support to M7 dts for DART and SOM ||
|-
| Added freertos-variscite 2.10.x support for DART and SOM ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Fixed system hang after "ifconfig eth0 down" ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Hardknott based on NXP L5.10.35_2.0.0 release||(kernel 5.10.35)
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_HARDKNOTT_V1.2_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Hardknott based on NXP L5.10.52_2.1.0 release||(kernel 5.10.52)
|-
| Added remoteproc support to load and run M7 firmwares from Linux userspace ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_HARDKNOTT_V2.1_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Linux Updates''' ||
|-
| imx8mp-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| wm8904: Initialize ADC 128x OSR Switch control to default value ||
|-
| dmaengine: imx-sdma: Start in suspended runtime ||
|-
| arm64: imx8_var_defconfig: add full Docker support ||
|-
| '''U-Boot Updates''' ||
|-
| imx8mp-var-som-symphony: Add gpio-hog-optional property to pca9534 gpio-hogs ||
|-
| gpio: uclass: Introduce gpio-hog-optional property ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Hardknott based on NXP L5.10.52_2.1.0 release||(kernel 5.10.52)
|-
| Added remoteproc support to load and run M7 firmwares from Linux userspace ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_HARDKNOTT_V2.1_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_HARDKNOTT_V2.2_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''Meta-variscite-imx update''' ||
|-
| imx-atf: Switch to branch lf_v2.4_var03
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Linux Updates''' ||
|-
| imx8mp-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| wm8904: Initialize ADC 128x OSR Switch control to default value ||
|-
| dmaengine: imx-sdma: Start in suspended runtime ||
|-
| arm64: imx8_var_defconfig: add full Docker support ||
|-
| '''U-Boot Updates''' ||
|-
| imx8mp-var-som-symphony: Add gpio-hog-optional property to pca9534 gpio-hogs ||
|-
| gpio: uclass: Introduce gpio-hog-optional property ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Hardknott based on NXP L5.10.52_2.1.0 release||(kernel 5.10.52)
|-
| Added remoteproc support to load and run M7 firmwares from Linux userspace ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_HARDKNOTT_V2.2_DART-MX8M-PLUS/><!--
--><section begin=RELEASE_HARDKNOTT_V2.3_DART-MX8M-PLUS/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
| Read carrier_rev from EEPROM ||
|-
| Add support for ADIN1300 ||
|-
| Fix SOM PHY reset when using legacy DT8MCustomBoard revisions ||
|-
| Set AR8033 VDDH_REG to 1.8V on Symphony-Board and DT8MCustomBoard ||
|-
| '''Linux updates''' ||
|-
| imx8_var_defconfig: enable driver for ADIN PHY || ADIN1300 replaces AR8033 on DART-MX8M-PLUS 1.3, VAR-SOM-MX8M-PLUS 1.3, DT8MCustomBoard 3.0 and Symphony-Board 1.6
|-
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''Meta-variscite-imx updates''' ||
|-
| imx-atf: Switch to branch lf_v2.4_var03
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Linux Updates''' ||
|-
| imx8mp-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| wm8904: Initialize ADC 128x OSR Switch control to default value ||
|-
| dmaengine: imx-sdma: Start in suspended runtime ||
|-
| arm64: imx8_var_defconfig: add full Docker support ||
|-
| '''U-Boot Updates''' ||
|-
| imx8mp-var-som-symphony: Add gpio-hog-optional property to pca9534 gpio-hogs ||
|-
| gpio: uclass: Introduce gpio-hog-optional property ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Hardknott based on NXP L5.10.52_2.1.0 release||(kernel 5.10.52)
|-
| Added remoteproc support to load and run M7 firmwares from Linux userspace ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_HARDKNOTT_V2.3_DART-MX8M-PLUS/><!--
--><section begin=mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Hardknott release based on NXP lf-5.10.72_2.2.1 || (kernel 5.10.72)
|-
! Known Issues !!
|-
| RPMSG Demos loaded from U-Boot don't work ||
|-
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.0/><!--
--><section begin=mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1/><!--
--><section begin=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
--><section begin=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
--><section begin=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
--><section begin=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0/><!--
--><section begin=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1/><!--
--><section begin=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2/><!--
--><section begin=mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
--><section begin=mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1/><!--
--><section begin=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
--><section begin=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1/><!--
--><section begin=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/><!--
--><section begin=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1}}
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/><!--
--><section begin=RELEASE_11.0.0_2.2.0_DART-MX8M-PLUS_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.2.0 for the i.MX8M Plus ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably || Known issue in this NXP Android release
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_11.0.0_2.2.0_DART-MX8M-PLUS_V1.0/><!--
--><section begin=RELEASE_11.0.0_2.2.0_DART-MX8M-PLUS_V1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| imx8mp-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| Remap buttons || Home is mapped to Android Home screen, Up is mapped to Volume Up and Down is mapped to Volume Down
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.2.0 for the i.MX8M Plus ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably || Known issue in this NXP Android release
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_11.0.0_2.2.0_DART-MX8M-PLUS_V1.1/><!--
--><section begin=RELEASE_11.0.0_2.2.0_DART-MX8M-PLUS_V1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot Updates''' ||
|-
| Read carrier_rev from EEPROM ||
|-
| Add support for ADIN1300 ||
|-
| Fix SOM PHY reset when using legacy DT8MCustomBoard revisions ||
|-
| Set AR8033 VDDH_REG to 1.8V on Symphony-Board and DT8MCustomBoard ||
|-
| '''Linux Updates''' ||
|-
| imx8_var_defconfig: enable driver for ADIN PHY || ADIN1300 replaces AR8033 on DART-MX8M-PLUS 1.3, VAR-SOM-MX8M-PLUS 1.3, DT8MCustomBoard 3.0 and Symphony-Board 1.6
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| imx8mp-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| Remap buttons || Home is mapped to Android Home screen, Up is mapped to Volume Up and Down is mapped to Volume Down
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.2.0 for the i.MX8M Plus ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably || Known issue in this NXP Android release
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_11.0.0_2.2.0_DART-MX8M-PLUS_V1.2/><!--
--><section begin=RELEASE_11.0.0_2.6.0_DART-MX8M-PLUS_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Plus ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably || Known issue in this NXP Android release
|-
| Cortex M7 || Running Ping pong example results in crash
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_11.0.0_2.6.0_DART-MX8M-PLUS_V1.0/><!--
--><section begin=mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-PLUS|RN_mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0/><!--

Latest revision as of 21:01, 13 November 2024

DART-MX8M-PLUS / VAR-SOM-MX8M-PLUS Release Notes

Yocto zeus-fsl-5.4.70-mx8mp-v1.1

Release Notes

Based on release Yocto: Poky 3.0, BSP: NXP L5.4.70_2.3.0, Linux: imx_5.4.70_2.3.0
Release tag zeus-fsl-5.4.70-mx8mp-v1.1
Release manifest imx-5.4.70-2.3.0-var01.xml
Date 02/17/2021
Supported platforms DART-MX8M-PLUS / VAR-SOM-MX8M-PLUS
SOM revision v1.1 to v1.x
File System build system Yocto Zeus
Recovery SD card link dart-mx8mp-recovery-sd.v30.img.gz

Relevant git Repositories

Source Repository Branch Commit ID
U-Boot https://github.com/varigit/uboot-imx imx_v2020.04_5.4.70_2.3.0_var01 91a13e88c939e1c44df2dda5a3736e445d47ccaa
Kernel https://github.com/varigit/linux-imx imx_5.4.70_2.3.0_var01 bfedd9879e135a8ac854a4a7ea53fda3a9897506
meta-variscite-imx https://github.com/varigit/meta-variscite-imx zeus-imx-5.4.70-var01 679f083e78ae71ab13abc008676a4cb2685c8986


After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List Description
Release 1.1
Fixed PCIE reset pin definition for DART-MX8M-PLUS on DT8MCustomBoard V2.0
Disabled GP_LED4 for DART-MX8M-PLUS on DT8MCustomBoard V2.0 GP_LED4 is unusable on this HW configuration
Fixed system freeze on resume, occurring when certain PCIE devices are plugged in
Upgraded rng-tools to version 6.9 to fix occasional hangs on shutdown
Disable systemd-networkd and systemd-resolved to avoid conflicts with NetworkManager
Release 1.0
First GA release based on NXP kernel 5.4.70
Added support for i.MX8MP SoC revision A1
Added support for DT8MCustomBoard V2.0
Retrieved from "https://variwiki.com/index.php?title=DART-MX8M-PLUS_Release_Notes&oldid=27496"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 13 November 2024, at 21:01.

© 2024 Variscite. All rights reserved